Air Handlers
Goodman AWST Air Handler, Multi Speed ECM Motor, 2 Ton Model AWST24SU1305 Awst Air Handler, Multi Speed Ecm Motor, 2 Ton Wall-Mount Air Handler 1½ to 3 Tons All Aluminum Coil Factory TXV Installed for Quicker Instal More Efficient Refrigerant Metering Mfg #AWST24SU1305
- Awst Air Handler, Multi Speed Ecm Motor, 2 Ton
- Wall-Mount Air Handler 1½ to 3 Tons
- All Aluminum Coil
- Factory TXV Installed for Quicker Instal
Goodman AWST Air Handler, Multi Speed ECM Motor, 2 Ton Model AWST24SU1308 Awst Air Handler, Multi Speed Ecm Motor, 2 Ton Wall-Mount Air Handler 1½ to 3 Tons All Aluminum Coil Factory TXV Installed for Quicker Instal More Efficient Refrigerant Metering Mfg #AWST24SU1308
- Awst Air Handler, Multi Speed Ecm Motor, 2 Ton
- Wall-Mount Air Handler 1½ to 3 Tons
- All Aluminum Coil
- Factory TXV Installed for Quicker Instal
Goodman AMST Air Handler, Nine Speed ECM Motor, 3 Ton Model AMST36CU1300 Amst Air Handler, Nine Speed Ecm Motor, 3 Ton Multi-Position, Multi-Speed, ECM-Based Air Handler with Internal TXV 1½ to 5 Tons All-Aluminum tube/aluminum fin coil Direct-drive, resilient-mount, 9-speed ECM motor Available without heat or with sequence-controlled and rust-resistant nickel chromium heating elements of 5, 6, 8 or 10 kW Mfg #AMST36CU1300
- Amst Air Handler, Nine Speed Ecm Motor, 3 Ton
- Multi-Position, Multi-Speed, ECM-Based Air Handler with Internal TXV 1½ to 5 Tons
- All-Aluminum tube/aluminum fin coil
- Direct-drive, resilient-mount, 9-speed ECM motor
Goodman AMST Air Handler, Nine Speed ECM Motor, 2 Ton Model AMST24BU1300 Amst Air Handler, Nine Speed Ecm Motor, 2 Ton Multi-Position, Multi-Speed, ECM-Based Air Handler with Internal TXV 1½ to 5 Tons All-Aluminum tube/aluminum fin coil Direct-drive, resilient-mount, 9-speed ECM motor Available without heat or with sequence-controlled and rust-resistant nickel chromium heating elements of 5, 6, 8 or 10 kW Mfg #AMST24BU1300
- Amst Air Handler, Nine Speed Ecm Motor, 2 Ton
- Multi-Position, Multi-Speed, ECM-Based Air Handler with Internal TXV 1½ to 5 Tons
- All-Aluminum tube/aluminum fin coil
- Direct-drive, resilient-mount, 9-speed ECM motor
Goodman AMST Air Handler, Nine Speed ECM Motor, 4 Ton Model AMST48CU1300 Amst Air Handler, Nine Speed Ecm Motor, 4 Ton Multi-Position, Multi-Speed, ECM-Based Air Handler with Internal TXV 1½ to 5 Tons All-Aluminum tube/aluminum fin coil Direct-drive, resilient-mount, 9-speed ECM motor Available without heat or with sequence-controlled and rust-resistant nickel chromium heating elements of 5, 6, 8 or 10 kW Mfg #AMST48CU1300
- Amst Air Handler, Nine Speed Ecm Motor, 4 Ton
- Multi-Position, Multi-Speed, ECM-Based Air Handler with Internal TXV 1½ to 5 Tons
- All-Aluminum tube/aluminum fin coil
- Direct-drive, resilient-mount, 9-speed ECM motor
Goodman AMST Air Handler, Nine Speed ECM Motor, 5 Ton Model AMST60DU1300 Amst Air Handler, Nine Speed Ecm Motor, 5 Ton Multi-Position, Multi-Speed, ECM-Based Air Handler with Internal TXV 1½ to 5 Tons All-Aluminum tube/aluminum fin coil Direct-drive, resilient-mount, 9-speed ECM motor Available without heat or with sequence-controlled and rust-resistant nickel chromium heating elements of 5, 6, 8 or 10 kW Mfg #AMST60DU1300
- Amst Air Handler, Nine Speed Ecm Motor, 5 Ton
- Multi-Position, Multi-Speed, ECM-Based Air Handler with Internal TXV 1½ to 5 Tons
- All-Aluminum tube/aluminum fin coil
- Direct-drive, resilient-mount, 9-speed ECM motor
Goodman AWST Air Handler, Multi Speed ECM Motor, 2.5 Ton Model AWST30LU1305 Awst Air Handler, Multi Speed Ecm Motor, 2.5 Ton Wall-Mount Air Handler 1½ to 3 Tons All Aluminum Coil Factory TXV Installed for Quicker Instal More Efficient Refrigerant Metering Mfg #AWST30LU1305
- Awst Air Handler, Multi Speed Ecm Motor, 2.5 Ton
- Wall-Mount Air Handler 1½ to 3 Tons
- All Aluminum Coil
- Factory TXV Installed for Quicker Instal
Goodman AWST Air Handler, Multi Speed ECM Motor, 2.5 Ton Model AWST30LU1310 Awst Air Handler, Multi Speed Ecm Motor, 2.5 Ton Wall-Mount Air Handler 1½ to 3 Tons All Aluminum Coil Factory TXV Installed for Quicker Instal More Efficient Refrigerant Metering Mfg #AWST30LU1310
- Awst Air Handler, Multi Speed Ecm Motor, 2.5 Ton
- Wall-Mount Air Handler 1½ to 3 Tons
- All Aluminum Coil
- Factory TXV Installed for Quicker Instal
Equipped with a Check Flow rater for cooling-only and heat pump operation. Direct-drive, multi-speed motors allows air volume variation for heating/cooling: Multi-speed ECM: AWUF19, 25, 31, 32, 37.
- Direct-drive, multi-speed motors allows air volume variation for heating/cooling
- Multi-speed ECM: AWUF19, 25, 31, 32, 37
- Multi-speed PSC motor: AWUF18, 24, 30, 36
- Sequence-controlled, rust-resistant nickel chromium heating elements of 3, 5, 8, and 10 kW
- First Co. 2.0 Ton Dx Fan Coil
- For R454B or R32 refrigerant
- Ceiling or fur-down installation
- Electric heat
- 24v control
- Galvanized and coated drain pan
- 8 kw electric heat - max fuse 50 amps - 49.25w x 21d x 10"h - 70 lb
- Compatible with all major brands of condensing units
- 35.3 amps
- 800 nominal CFM
- 208/230 volts
- MFG# 25HXS0802UZP000AAF
- First Co. 2.5 Ton Dx Fan Coil
- For R454B or R32 refrigerant
- Ceiling or fur-down installation
- Electric heat
- 24v control
- Galvanized and coated drain pan
- 10 kw electric heat - max fuse 60 amps - 49.25w x 21d x 10"h - 85 lb
- Compatible with all major brands of condensing units
- 43.6 amps
- 1000 nominal CFM
- 208/230 volts
- MFG# 31HXS1002UZP000AAF
- First Co. Cdx-hw 1.5 Ton Aquatherm Fan Coil
- For R454B or R32 refrigerant
- Dx cooling and hot water heating
- Piston-type metering device
- Two speed fan
- Insulated drain pan
- 120/24 volt relay/transformer
- Ships with a piston as a place holder and is intended to be used along with either a R454B or R32 TXV kit.
- 120 volt
- 18,000 BTU dx cooling
- 28,300 BTU hot water heating
- Heating 2.8 GPM
- 38.13w x 21d x 10"h
- 65 Lbs
- MFG# 18CDXQ201UZP050AAF
SmartComfort by Carrier 2.5T Closet Mount Apartment Air Handler w/ ECM Motor
- 5 Speed ECM Blower Motor
- R-4.2 Insulation
- Less Than 2% Cabinet Air Leakage
- 4 Way Multi-Position
SmartComfort by Carrier 5.0 Ton Multi Position AH - 454B Refrigerant. For Use With R-454b Refrigerant. Factory installed TXV standard. Refrigerant leak detection dissipation system for added safety. Multi-tap ECM (electronic commutating motor) motor. All Aluminum coil. Pre-painted galvanized steel cabinet (dark grey). 4 way Multipoise. Cabinet air leakage rate below 1.4% when tested to ASHRAE Standard 193. Horizontal hanging provisions on cabinet. Available 3 through 30 kW accessory heaters - field installed. Filter size 24" x 20". Mfg #FHMA5B60L0DA
- For Use With R-454b Refrigerant
- Factory installed TXV standard
- Refrigerant leak detection dissipation system for added safety
- Multi-tap ECM (electronic commutating motor) motor
Johnson Controls Furnace
- Factory-installed electronic expansion valve provides consistent capacity and efficiency across a wide band of operation, and multi-position flow as standard provides everything needed for all installed positions without additional kits
- Less than 2% air leakages at 1.0" esp. ensures only conditioned air moves through your home and unconditioned air isn't introduced into the system
- MaxAlloy coil features advanced corrosion-resistant design for long life
- Part of a variable-capacity comfort system, the JHVV is designed to be paired with the AL21 20+ SEER2 air conditioner or HL20 19+ SEER2 heat pump
- Built-in filter rack accepts 1.0" disposable and cleanable air filters
- Integrates with the Hxâ„¢3 Communicating Zoning System
- Variable-speed technology dynamically adjusts capacity and airflow to match changing needs wether heating, cooling or humidity contol
- 10 Year Parts Limited Warranty
- Designed in the USA
Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details. Professional installation recommended.
- Internal factory installed thermal expansion valves for cooling and heat pump applications
- Direct drive, multi speed ECM blower motor
- All-aluminum evaporator coil
- Coil mounting track for quick repositioning
- First Co. 2.0 Ton Dx Fan Coil
- For R454B or R32 refrigerant
- Ceiling or fur-down installation
- Electric heat
- 24v control
- Galvanized and coated drain pan
- 5 kw electric heat - max fuse 30 amps - 49.25w x 21d x 10"h - 70 lb
- Compatible with all major brands of condensing units
- 22.8 amps
- 800 nominal CFM
- 208/230 volts
- MFG# 25HXS0502UZP000AAF
- First Co. Cdx-hw 2.0 Ton Aquatherm Fan Coil
- For R454B or R32 refrigerant
- Dx cooling and hot water heating
- Piston-type metering device
- Two speed fan
- Insulated drain pan
- 120/24 volt relay/transformer
- Ships with a piston as a place holder and is intended to be used along with either a R454B or R32 TXV kit.
- 120 volt
- 24,000 BTU dx cooling
- 34,900 BTU hot water heating
- Heating 3.5 GPM
- 44.13w x 21d x 10"h
- 74 Lbs
- MFG# 24CDXW201UZP050AAF
Goodman
- 5.0T
- AMST Multi-Position
- Air Handler
- AMST60DU1400
Goodman AWST Air Handler, Multi Speed ECM Motor, 1.5 Ton Model AWST18SU1305 Awst Air Handler, Multi Speed Ecm Motor, 1.5 Ton Wall-Mount Air Handler 1½ to 3 Tons All Aluminum Coil Factory TXV Installed for Quicker Instal More Efficient Refrigerant Metering Mfg #AWST18SU1305
- Awst Air Handler, Multi Speed Ecm Motor, 1.5 Ton
- Wall-Mount Air Handler 1½ to 3 Tons
- All Aluminum Coil
- Factory TXV Installed for Quicker Instal
Goodman
- 1.5T
- 5kw Stud Mount
- Air Handler
- AWST18SU1405
- First Co. 2.0 Ton Dx Fan Coil
- For R454B or R32 refrigerant
- Ceiling or fur-down installation
- Electric heat
- 24v control
- Galvanized and coated drain pan
- 6 kw electric heat - max fuse 35 amps - 43.25w x 21d x 10"h - 63 lb
- Compatible with all major brands of condensing units
- 27 amps
- 800 nominal CFM
- 208/230 volts
- MFG# 24HXS0602UZP000AAF
The Goodman AWUF310516 Air Conditioner Air Handler is designed to be vertically wall- or stud- mounted. This Goodman AWUF310516 Air Conditioner Air Handler is housed in a fully insulated, galvanized-steel cabinet. The Goodman Air Conditioning and Heating company have become one of the largest manufacturers of residential and light commercial air conditioning, heating, and indoor air quality products and systems by focusing on just one thing, building the most reliable and refreshingly affordable indoor comfort products in the market.
- AWUT models: equipped witha fully adjustable TXV
- Aluminum tubing coils on all models
- Thermoplastic drain pan with bottom primary and secondary drain connections
- Factory-installed pull-type disconnect
- First Co. 2.0 Ton Dx Fan Coil
- For R454B or R32 refrigerant
- Ceiling or fur-down installation
- Electric heat
- 24v control
- Galvanized and coated drain pan
- 5 kw electric heat - max fuse 30 amps - 43.25w x 21d x 10"h - 63 lb
- Compatible with all major brands of condensing units
- 22.8 amps
- 800 nominal CFM
- 208/230 volts
- MFG# 24HXS0502UZP000AAF