A simple and affordable way to add extra warmth to any living space. The Com-Pak fan-forced in-wall electric heater features a compact size and recess-mount design that requires minimal wall space - ideal for renovations or new construction. This hard-wired electric heater provides quick and efficient heat, yet is quiet enough for any room. Built-in thermostat included.

• Hard-wired 2,000-Watt heater requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing).
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Quiet fan and fast-heating coil element quickly warm a space up to 250 sq. ft.
• 2,000-Watt output with 240-Volt wiring (8.3 Amps, 6,825 BTUs) or 1,500-Watt output with 208-Volt wiring (7.2 Amps, 5,120 BTUs)
• Space-saving, recess-mount design. Rough-in dimensions: 8 in. W x 10.125 in. H x 4 in. D
• A complete unit including wall can, heater, white grille and built-in thermostat
• Smooth, powder coat white paint finish that is resistant to corrosion, scratches and fading
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• Thermostat temperature range: 40F - 85F
• Thermostat temperature range is 40°F - 85°F
• UL listed in the US and Canada for safety compliance
• 2-year limited warranty

An ideal choice for heating larger rooms with just one heater--two heaters behind a single grille quickly heat a large area and help eliminate drafts and cold spots in your open areas, such as a foyer. A simple and affordable way to add extra warmth to any living space. The Com-Pak Twin fan-forced in-wall electric heater features a recess-mount design that requires minimal wall space - ideal for renovations or new construction. This hard-wired electric heater provides quick and efficient heat. Built-in thermostat included.

• Hard-wired 4,000-Watt heater requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing).
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Two fans and two fast-heating coil elements quickly warm a space up to 500 sq. ft.
• 4,000-Watt output with 240-Volt wiring (16.7 Amps, 13,650 BTUs) or 3,000-Watt output with 208-Volt wiring (14.4 Amps, 10,240 BTUs)
• Space-saving, recess-mount design for larger rooms. Rough-in dimensions: 14.5 in. W x 10.125 in. H x 4 in. D
• A complete unit including wall can, heater, white grille and built-in thermostat
• Smooth, powder coat white paint finish that is resistant to corrosion, scratches and fading
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• UL listed for safety
• Thermostat temperature range is 40°F - 85°F
• UL listed in the US and Canada for safety compliance

A simple and affordable way to add extra warmth to any living space. The Com-Pak fan-forced in-wall electric heater features a compact size and recess-mount design that requires minimal wall space - ideal for renovations or new construction. This hard-wired electric heater provides quick and efficient heat, yet is quiet enough for any room. Built-in thermostat included.

• Hard-wired 1,000-Watt heater requires 120-Volt wiring (single breaker). Before you purchase, confirm you have 120-Volt power supply (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Quiet fan and fast-heating coil element quickly warm a space up to 125 sq. ft.
• 1,000-Watt output with 120-Volt wiring (8.3 Amps, 3,415 BTUs)
• Space-saving, recess-mount design. Rough-in dimensions: 8 in. W x 10.125 in. H x 4 in. D
• A complete unit including wall can, heater, white grille and built-in thermostat
• Smooth, powder coat white paint finish that is resistant to corrosion, scratches and fading
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• Thermostat temperature range: 40F - 85F
• Thermostat temperature range is 40°F - 85°F
• UL listed in the US and Canada for safety compliance
• 2-year limited warranty

A simple and affordable way to add extra warmth to any living space. The Com-Pak fan-forced in-wall electric heater features a compact size and recess-mount design that requires minimal wall space - ideal for renovations or new construction. This hard-wired electric heater provides quick and efficient heat, yet is quiet enough for any room. Built-in thermostat included.

• Hard-wired 1,500-Watt heater requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing).
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Quiet fan and fast-heating coil element quickly warm a space up to 175 sq. ft.
• 1,500-Watt output with 240-Volt wiring (6.3 Amps, 5,120 BTUs) or 1,125-Watt output with 208-Volt wiring (5.4 Amps, 3,840 BTUs)
• Space-saving, recess-mount design. Rough-in dimensions: 8 in. W x 10.125 in. H x 4 in. D
• A complete unit including wall can, heater, white grille and built-in thermostat
• Smooth, powder coat white paint finish that is resistant to corrosion, scratches and fading
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• Thermostat temperature range: 40F - 85F
• Thermostat temperature range is 40°F - 85°F
• UL listed in the US and Canada for safety compliance
• 2-year limited warranty

For true zonal heating in a compact design that fits in anywhere, choose this wall heater. Its fast-response heating element kicks in quickly, providing warmth for your bedroom, bathroom or hallway. The patented CLIP-N-FIT system, thermal fuse and self-hold limit makes installing it on the wall safe and easy.

• Warm up the room rapidly with this reliable wall heater; its fast-response element delivers warmth instantly
• Get reliable zonal heating without cold spots; the unit's multi-layer impeller delivers consistent airflow in an energy-efficient design
• Compact design fits well in bathrooms, bedrooms and hallways for comfortable living all year round
• Unit features a self-hold limit to protect against overheating, with a 1-time thermal fuse backup

A simple and affordable way to add extra warmth to any living space. The Com-Pak fan-forced in-wall electric heater features a compact size and recess-mount design that requires minimal wall space - ideal for renovations or new construction. This hard-wired electric heater provides quick and efficient heat, yet is quiet enough for any room. This product is an interior replacement heater assembly only. A full heater unit requires a wall can and grille sold separately. A thermostat is required for operation; choose a line voltage electronic or programmable wall thermostat or built-in thermostat kit also sold separately.

• Hard-wired 2,000-Watt heater requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing).
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Quiet fan and fast-heating coil element quickly warm a space up to 250 sq. ft.
• 2,000-Watt output with 240-Volt wiring (8.3 Amps, 6,825 BTUs) or 1,500-Watt output with 208-Volt wiring (7.2 Amps, 5,120 BTUs)
• Space-saving, recess-mount design. Rough-in dimensions: 8 in. W x 10.125 in. H x 4 in. D
• An interior replacement heater assembly only. A full heater unit requires a wall can, grille and thermostat (sold separately).
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• A wall or built-in thermostat is required for control
• UL listed in the US and Canada for safety compliance
• 2-year limited warranty

Fan-forced wall heaters deliver efficiency and perform powerfully across both residential and commercial applications. Electric wall heaters are great for entryways, dens, basements and bedrooms for residential applications. They are ideal for larger areas in commercial applications such as hotels, restaurants and commercial office atriums.

• Set this commercial wall heater to fan only mode for added air circulation or to keep things cool during the warmer months
• Wall heater has a fan delay feature that waits until the unit warms up to begin blowing air into the room; the fan keeps operating until the unit cools down, so you get maximum heating performance
• Commercial wall heater features an integral double-pole thermostat for easy temperature adjustment whenever you need to make a change
• Wall heater features a permanently lubricated fan motor, so it will be ready for long-term operation with little required maintenance

These series wall heaters deliver efficiency and perform powerfully across both residential and commercial applications. Electric wall heaters are great for entryways, dens, basements and bedrooms for residential applications. They are ideal for larger areas in commercial applications such as hotels, restaurants and commercial office atriums.

• For wide open spaces like entryways and vestibules, basements, playrooms and mechanical areas, this unit provides fast-acting heat
• 4800-Watt of power provide fast-acting, robust heat right where you need it, with no need for venting or exhaust
• Unit's safety protection will shut the unit off before it overheats if the unit is accidentally blocked
• Prolongs the life of the heating element by keeping the fan off until the element is at the proper temperature
• Factory-installed, double-pole thermostat with a positive On/Off position is included for easy installation and convenient control

Simple to use, twist dial mechanical single-pole thermostat. Can replace most wall-mounted line voltage thermostats and the color-coded wires make installation simple. A cost-effective and easy way to control room temperature.

• For use with line voltage 120, 240 or 208-Volt electric baseboard and wall heaters (controls up to 5,280-Watt at 240-Volt or 2,640-Watt at 120-Volt output)
• Easily replaces most line voltage wall-mounted thermostats
• Simple 2-wire installation (single-pole)
• 22 Amp
• Thermostat temperature range is 40°F - 85°F
• White
• UL listed in the US and Canada for safety compliance
• 1-year limited warranty

These series wall heaters deliver efficiency and perform powerfully across both residential and commercial applications. Electric wall heaters are great for entryways, dens, basements and bedrooms for residential applications. They are ideal for larger areas in commercial applications such as hotels, restaurants and commercial office atriums.

• For wide open spaces like entryways and vestibules, basements, playrooms and mechanical areas, this unit provides fast-acting heat
• 4000-Watt of power provide fast-acting, robust heat right where you need it, with no need for venting or exhaust
• Unit's safety protection will shut the unit off before it overheats if the unit is accidentally blocked
• Prolongs the life of the heating element by keeping the fan off until the element is at the proper temperature
• Factory-installed, double-pole thermostat with a positive On/Off position is included for easy installation and convenient control

A simple and affordable way to add extra warmth to any living space. The Com-Pak fan-forced in-wall electric heater features a compact size and recess-mount design that requires minimal wall space - ideal for renovations or new construction. This hard-wired electric heater provides quick and efficient heat, yet is quiet enough for any room. This product is an interior replacement heater assembly only. A full heater unit requires a wall can and grille sold separately. A thermostat is required for operation; choose a line voltage electronic or programmable wall thermostat or built-in thermostat kit also sold separately.

• Hard-wired 1,500-Watt heater requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing).
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Quiet fan and fast-heating coil element quickly warm a space up to 175 sq. ft.
• 1,500-Watt output with 240-Volt wiring (6.3 Amps, 5,120 BTUs) or 1,125-Watt output with 208-Volt wiring (5.4 Amps, 3,840 BTUs)
• Space-saving, recess-mount design. Rough-in dimensions: 8 in. W x 10.125 in. H x 4 in. D
• An interior replacement heater assembly only. A full heater unit requires a wall can, grille and thermostat (sold separately).
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• A wall or built-in thermostat is required for control
• Needs a wall thermostat or built-in thermostat for temperature control (sold separately)
• UL listed in the US and Canada for safety compliance
• 2-year limited warranty

A simple and affordable way to add extra warmth to any living space. The Com-Pak fan-forced in-wall electric heater features a compact size and recess-mount design that requires minimal wall space - ideal for renovations or new construction. This hard-wired electric heater provides quick and efficient heat, yet is quiet enough for any room. Built-in thermostat included.

• Hard-wired 1,000-Watt heater requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing).
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Quiet fan and fast-heating coil element quickly warm a space up to 125 sq. ft.
• 1,000-Watt output with 240-Volt wiring (4.2 Amps, 3,415 BTUs) or 750-Watt output with 208-Volt wiring (3.6 Amps, 2,560 BTUs)
• Space-saving, recess-mount design. Rough-in dimensions: 8 in. W x 10.125 in. H x 4 in. D
• A complete unit including wall can, heater, white grille and built-in thermostat
• Smooth, powder coat white paint finish that is resistant to corrosion, scratches and fading
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• Thermostat temperature range: 40F - 85F
• Thermostat temperature range is 40°F - 85°F
• UL listed in the US and Canada for safety compliance
• 2-year limited warranty

Use up to 30% less energy and experience more comfort with precise, consistent temperature control. The Energy Plus in-wall fan-forced electric heater uses an intelligent control and auto adjusting fan speed to maintain the desired temperature for your room within 1°. Delivering only the heat you need for maximum efficiency. This hard-wired electric heater warms small to medium sized rooms up to 175 sq. ft.

• Hard-wired multi-volt fan heater with unique power supply smart sensor takes all the guesswork out of installation by auto-adjusting the heater voltage to match your voltage supply. No need to worry about damaging the heater or whether you have 120-Volt, 208-Volt, or 240-Volt wiring. Before purchasing, confirm your power supply voltage to determine the heater's output (check your breaker, use a voltmeter, or refer to your old heater's label if replacing).
• Multi-Volt options: 1,600-Watt output at 240 volts (6.7 Amps, 5,460 BTUs); 1,500-Watt output at 208 volts (7.2 Amps, 5,120 BTUs); 1,000-Watt output at 120 volts (8.3 Amps, 3,412 BTUs)
• Easily update old heaters: uses same wall can as many Cadet Com-Pak series units, so no wall patchwork or additional wall board cut outs should be required
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Space-saving, recess-mount design. Rough-in dimensions: 8 in. W x 10.125 in. H x 4 in. D
• A complete unit including wall can, heater, white grille and built-in digital thermostat
• Smooth, powder coat white paint finish that is resistant to corrosion, scratches and fading
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• Complete unit includes wall can, heat box and grill and digital thermostat
• Tamper-proof settings let you lock in minimm and maximum temperature points and a fan-only mode lets you circulate air year round without heat
• ETL listed in the US and Canada for safety compliance
• 5-year limited warranty

Give your furnace a fresh look with the Williams Face Panel Replacement for Monterey Furnaces. The furnace cover is constructed with heavy-gauge metal for long-lasting use. The soft white finish offers a classic look.

• Durable heavy-gauge metal construction
• Soft white finish
• Replacement cover for your furnace
• For use with monterey furnace models 2509621, 2509622, 3509621, 3509622, 5009621 (2 required) and 5009622 (2 required) (sold separately)
• Original factory replacement part

KING redefines comfort with the modern architectural design of the PX series ComfortCraft wall heater. The PX series heater delivers nearly 100% efficient electric heat, perfect for large living areas yet whisper quiet enough for bedrooms. The premium combination of an efficient high-mass steel element and whisper quiet squirrel cage blower, offers top of the class performance and years of trouble-free operation. PX comes with 5 year warranty and 30 and above year history of reliability. For best results use with an electronic line voltage wall thermostat. Also available with a built-in thermostat. KINGs exclusive Pic-A-Watt heating element allows customers to select from a range of wattage options, tailoring the heater to a rooms specific heating requirements. For smaller areas, chose a lower wattage to efficiently heat the room. For larger rooms, choose a higher wattage and maximize comfort. It's as easy as unplugging a wire to select the wattage during installation. Now That's Smart.

• Modern curved design
• Pic-a-watt element
• Multiple wattage options
• Whisper quiet blower design
• Zonal heating systems save money
• C-frame motor
• Patented smart limit protection
• 20-Gauge powder-coated grill
• 5-year limited warranty

KING redefines comfort with the modern architectural design of the PX series ComfortCraft wall heater. The PX series heater delivers nearly 100% efficient electric heat, perfect for large living areas yet whisper quiet enough for bedrooms. The premium combination of an efficient high-mass steel element and whisper quiet squirrel cage blower, offers top of the class performance and years of trouble-free operation. PX comes with 5 year warranty and 30 and above year history of reliability. For best results use with an electronic line voltage wall thermostat. Also available with a built-in thermostat. KINGs exclusive Pic-A-Watt heating element allows customers to select from a range of wattage options, tailoring the heater to a rooms specific heating requirements. For smaller areas, chose a lower wattage to efficiently heat the room. For larger rooms, choose a higher wattage and maximize comfort. It's as easy as unplugging a wire to select the wattage during installation. Now That's Smart.

• Modern curved design
• Pic-a-watt element
• Multiple wattage options
• Whisper quiet blower design
• Zonal heating systems save money
• C-frame motor
• Patented smart limit protection
• 20-Gauge powder-coated grill
• 5-year limited warranty

A SunWarmth CIR heater uses infrared light to economically heat objects, not the space, for maximum comfort and minimal energy usage. The result is comfortable, odorless, and silent warmth almost anywhere. SunWarmth outdoor heaters are perfect for extending the season on decks, patios, and balconies in homes or restaurants, or anywhere instant heat is needed. The short-wave infrared technology in a SunWarmth heater uses less energy than similar heaters using medium-wave infrared. The high-quality and attractive European design uses durable, long-lasting weatherproof aluminum and a stainless steel grille.

• Instant heat as soon as it's switched on
• SunWarmth CIR 200-2 O heater is 240-Volt, comes wired with a cord, and must be hard-wired
• 2000-Watt lamp in a SunWarmth CIR 200-2 O heater draws 8.3 Amp
• A SunWarmth CIR 200-2 O will heat a 133 - 165 sq. ft. area with 6824 BTU/hr.
• High quality design and manufacturing
• Casing is durable, long-lasting, weatherproof aluminum, in white finish with a stainless steel grille
• Ideal for any indoor or protected outdoor area where instant heat is needed such as porches, patios, decks, garages, and shops

Make a bold statement with the Paw Ultra series heater. Adding modern sophistication to our original Pic-A-Watt multi-Watt steel fin heater with its sleek modern grill design, the Ultra is ideal for upscale condominiums and luxury residences. Kings exclusive Pic-A-Watt steel fin element allows customers to select from a range of Wattage options, tailoring the heater to an areas specific heating requirements. Perfect for large living areas yet whisper quiet enough for bedrooms. The premium combination of an efficient high-mass steel element and whisper quiet squirrel cage blower, offers top of the class performance and years of trouble -free operation. Now Thats Smart.

• Make a bold statement with the paw ultra-series
• Multiple wattage options, to tailor to a rooms specific heating requirements
• Patented smart limit protection
• Whisper quiet squirrel cage blower
• Available in white and almond colors
• 5-year warranty

The original Multi-Watt steel fin heater. KING's Pic-A-Watt series "Best" Fan Forced Wall Heater complete with wall can, interior and grille. An excellent upgrade heater. Unique design allows the user to change-Wattage output by disconnecting color-coded terminals. Contains a steel finned element for long life, a squirrel cage blower for quiet operation and is equipped with the patented Smart Limit Protection overheat safety system. The grille with rounded die-formed corners has a crisp clean appearance that blends with any decor. This heater is frequently used as the primary heating system in apartments and homes, and as supplemental heat in residential and commercial applications. The PAW has a 12 year history of reliability, is and carries a 5 year warranty (element only), 2 year warranty on all other components. It can be used with a built-in (TKIT-1) or wall-mount thermostat. For best results use with an electronic line voltage wall thermostat.

• Patented smart limit protection
• Patented pic-a-watt element (500-Watt - 2250-Watt at 240-Volt)
• Wall-mount thermostat
• Squirrel cage blower

KING redefines comfort with the modern architectural design of the PX series ComfortCraft wall heater. The PX series heater delivers nearly 100% efficient electric heat, perfect for large living areas yet whisper quiet enough for bedrooms. The premium combination of an efficient high-mass steel element and whisper quiet squirrel cage blower, offers top of the class performance and years of trouble-free operation. PX comes with 5 year warranty and 30 and above year history of reliability. For best results use with an electronic line voltage wall thermostat. Also available with a built-in thermostat. KINGs exclusive Pic-A-Watt heating element allows customers to select from a range of wattage options, tailoring the heater to a rooms specific heating requirements. For smaller areas, chose a lower wattage to efficiently heat the room. For larger rooms, choose a higher wattage and maximize comfort. It's as easy as unplugging a wire to select the wattage during installation. Now That's Smart.

• Modern curved design
• Pic-a-watt element
• Multiple wattage options
• Whisper quiet blower design
• Zonal heating systems save money
• C-frame motor
• Patented smart limit protection
• 20-Gauge powder-coated grill
• 5-year limited warranty

A SunWarmth CIR heater uses infrared light to economically heat objects, not the space, for maximum comfort and minimal energy usage. The result is comfortable, odorless, and silent warmth almost anywhere. SunWarmth outdoor heaters are perfect for extending the season on decks, patios, and balconies in homes or restaurants, or anywhere instant heat is needed. The short-wave infrared technology in a SunWarmth heater uses less energy than similar heaters using medium-wave infrared. The high-quality and attractive European design uses durable, long-lasting weatherproof aluminum and a stainless steel grille.

• Instant heat as soon as it's switched on
• SunWarmth CIR 400-2 O heater is 240-Volt, comes wired with a cord, and must be hard-wired
• SunWarmth CIR 400-2 O heater has two 2000-Watt lamps that draw 8.3 Amp each for a total draw of 16.6 Amp
• A SunWarmth CIR 400-2 O will heat a 205 - 275 sq. ft. area with 13,648 BTU/hr.
• High quality design and manufacturing
• Casing is durable, long-lasting, weatherproof aluminum, in white finish with a stainless steel grille
• Ideal for any indoor or protected outdoor area where instant heat is needed such as porches, patios, decks, garages, and shops

King redefines comfort with the modern architectural design of the PX series ComfortCraft wall heater. The PX series heater delivers nearly 100% efficient electric heat, perfect for large living areas yet whisper quiet enough for bedrooms. The premium combination of an efficient high-mass steel element and whisper quiet squirrel cage blower, offers top of the class performance and years of trouble -free operation. Now Available in 4 design colors to match any decor: White Dove, Oiled Bronze, Satin Nickel and Almandine. Kings exclusive Pic-A-Wat heating element allows customers to select from a range of Wattage options, tailoring the heater to a rooms specific heating requirements. Now Thats Smart.

• Modern design that redefines comfort
• Multiple wattage options, to tailor to a rooms specific heating requirements
• Patented smart limit protection
• Whisper quiet squirrel cage blower
• Compatible with in-built or remote thermostats
• Zonal heating systems save money
• Available in 4 new designer finishes
• 5-year warranty

King redefines comfort with the modern architectural design of the PX series ComfortCraft wall heater. The PX series heater delivers nearly 100% efficient electric heat, perfect for large living areas yet whisper quiet enough for bedrooms. The premium combination of an efficient high-mass steel element and whisper quiet squirrel cage blower, offers top of the class performance and years of trouble -free operation. Now Available in 4 design colors to match any decor: White Dove, Oiled Bronze, Satin Nickel and Almandine. Kings exclusive Pic-A-Wat heating element allows customers to select from a range of Wattage options, tailoring the heater to a rooms specific heating requirements. Now Thats Smart.

• Modern design that redefines comfort
• Multiple wattage options, to tailor to a rooms specific heating requirements
• Patented smart limit protection
• Whisper quiet squirrel cage blower
• Compatible with in-built or remote thermostats
• Zonal heating systems save money
• Available in 4 new designer finishes
• 5-year warranty

The W Heater was designed to be the highest quality economy heater on the market. It is commonly used in apartment construction or as supplemental heat in single family homes. By combining an efficient impeller style fan with a Nichrome heating element, the W heater delivers instant heat in even the draftiest locations. For use with a wall thermostat or in-built thermostat. A powder-coated, surface mounted wall-can may be purchased separately.

• Economically built for maximum comfort
• Nichrome open coil element for quick heat transfer
• Dual wattage design
• C-frame motor
• 4-blade aluminum fan
• Patented smart limit protection
• Wall can with quick set stud tabs
• 1-year warranty