A simple and affordable way to add extra warmth to any living space. The Com-Pak fan-forced in-wall electric heater features a compact size and recess-mount design that requires minimal wall space - ideal for renovations or new construction. This hard-wired electric heater provides quick and efficient heat, yet is quiet enough for any room. Built-in thermostat included.

• Hard-wired 2,000-Watt heater requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing).
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Quiet fan and fast-heating coil element quickly warm a space up to 250 sq. ft.
• 2,000-Watt output with 240-Volt wiring (8.3 Amps, 6,825 BTUs) or 1,500-Watt output with 208-Volt wiring (7.2 Amps, 5,120 BTUs)
• Space-saving, recess-mount design. Rough-in dimensions: 8 in. W x 10.125 in. H x 4 in. D
• A complete unit including wall can, heater, white grille and built-in thermostat
• Smooth, powder coat white paint finish that is resistant to corrosion, scratches and fading
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• Thermostat temperature range: 40F - 85F
• Thermostat temperature range is 40°F - 85°F
• UL listed in the US and Canada for safety compliance
• 2-year limited warranty

Use up to 30% less energy and experience more comfort with precise, consistent temperature control. The Energy Plus in-wall fan-forced electric heater uses an intelligent control and auto adjusting fan speed to maintain the desired temperature for your room within 1°. Delivering only the heat you need for maximum efficiency. This hard-wired electric heater warms small to medium sized rooms up to 175 sq. ft.

• Hard-wired multi-volt fan heater with unique power supply smart sensor takes all the guesswork out of installation by auto-adjusting the heater voltage to match your voltage supply. No need to worry about damaging the heater or whether you have 120-Volt, 208-Volt, or 240-Volt wiring. Before purchasing, confirm your power supply voltage to determine the heater's output (check your breaker, use a voltmeter, or refer to your old heater's label if replacing).
• Multi-Volt options: 1,600-Watt output at 240 volts (6.7 Amps, 5,460 BTUs); 1,500-Watt output at 208 volts (7.2 Amps, 5,120 BTUs); 1,000-Watt output at 120 volts (8.3 Amps, 3,412 BTUs)
• Easily update old heaters: uses same wall can as many Cadet Com-Pak series units, so no wall patchwork or additional wall board cut outs should be required
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Space-saving, recess-mount design. Rough-in dimensions: 8 in. W x 10.125 in. H x 4 in. D
• A complete unit including wall can, heater, white grille and built-in digital thermostat
• Smooth, powder coat white paint finish that is resistant to corrosion, scratches and fading
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• Complete unit includes wall can, heat box and grill and digital thermostat
• Tamper-proof settings let you lock in minimm and maximum temperature points and a fan-only mode lets you circulate air year round without heat
• ETL listed in the US and Canada for safety compliance
• 5-year limited warranty

A simple and affordable way to add extra warmth to any living space. The Com-Pak fan-forced in-wall electric heater features a compact size and recess-mount design that requires minimal wall space - ideal for renovations or new construction. This hard-wired electric heater provides quick and efficient heat, yet is quiet enough for any room. Built-in thermostat included.

• Hard-wired 1,000-Watt heater requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing).
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Quiet fan and fast-heating coil element quickly warm a space up to 125 sq. ft.
• 1,000-Watt output with 240-Volt wiring (4.2 Amps, 3,415 BTUs) or 750-Watt output with 208-Volt wiring (3.6 Amps, 2,560 BTUs)
• Space-saving, recess-mount design. Rough-in dimensions: 8 in. W x 10.125 in. H x 4 in. D
• A complete unit including wall can, heater, white grille and built-in thermostat
• Smooth, powder coat white paint finish that is resistant to corrosion, scratches and fading
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• Thermostat temperature range: 40F - 85F
• Thermostat temperature range is 40°F - 85°F
• UL listed in the US and Canada for safety compliance
• 2-year limited warranty

An ideal choice for heating larger rooms with just one heater--two heaters behind a single grille quickly heat a large area and help eliminate drafts and cold spots in your open areas, such as a foyer. A simple and affordable way to add extra warmth to any living space. The Com-Pak Twin fan-forced in-wall electric heater features a recess-mount design that requires minimal wall space - ideal for renovations or new construction. This hard-wired electric heater provides quick and efficient heat. Built-in thermostat included.

• Hard-wired 4,000-Watt heater requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing).
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Two fans and two fast-heating coil elements quickly warm a space up to 500 sq. ft.
• 4,000-Watt output with 240-Volt wiring (16.7 Amps, 13,650 BTUs) or 3,000-Watt output with 208-Volt wiring (14.4 Amps, 10,240 BTUs)
• Space-saving, recess-mount design for larger rooms. Rough-in dimensions: 14.5 in. W x 10.125 in. H x 4 in. D
• A complete unit including wall can, heater, white grille and built-in thermostat
• Smooth, powder coat white paint finish that is resistant to corrosion, scratches and fading
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• UL listed for safety
• Thermostat temperature range is 40°F - 85°F
• UL listed in the US and Canada for safety compliance

A simple and affordable way to add extra warmth to any living space. The Com-Pak fan-forced in-wall electric heater features a compact size and recess-mount design that requires minimal wall space - ideal for renovations or new construction. This hard-wired electric heater provides quick and efficient heat, yet is quiet enough for any room. Built-in thermostat included.

• Hard-wired 1,500-Watt heater requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing).
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Quiet fan and fast-heating coil element quickly warm a space up to 175 sq. ft.
• 1,500-Watt output with 240-Volt wiring (6.3 Amps, 5,120 BTUs) or 1,125-Watt output with 208-Volt wiring (5.4 Amps, 3,840 BTUs)
• Space-saving, recess-mount design. Rough-in dimensions: 8 in. W x 10.125 in. H x 4 in. D
• A complete unit including wall can, heater, white grille and built-in thermostat
• Smooth, powder coat white paint finish that is resistant to corrosion, scratches and fading
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• Thermostat temperature range: 40F - 85F
• Thermostat temperature range is 40°F - 85°F
• UL listed in the US and Canada for safety compliance
• 2-year limited warranty