Cadet electric baseboard heaters are a simple and economical way to add quiet, convection heat wherever it's needed in your home. This white 48-inch heater is an industry-standard size making it ideal for replacement or new construction, and is designed for easy installation with pre-punched mounting marks and wiring at both ends. A thermostat is required for operation (sold separately). Be sure to choose the correct heater size for your room. On the chart below, find the area size you want to heat and then select the corresponding wattage. Proudly made in the USA.

• A permanent, safe, and reliable heating solution with no electrical cords to worry about; requires a hard-wire installation
• Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Mid-sized 1,000-Watt heater effectively warms up to 125 sq. ft. (small to medium-sized rooms)
• 1,000-Watt output with 240-Volt wiring (4.2 Amps, 3,415 BTUs) or 750-Watt output with 208-Volt wiring (3.6 Amps, 2,560 BTUs)
• Easy installation with pre-punched mounting marks at 1 in. spaces and accessible front caps, plus wiring at both ends
• Requires a thermostat for temperature control; choose a line voltage electronic or programmable wall thermostat or built-in thermostat (sold separately)
• Place directly on the floor, mount to wall and maintain 12 in. clearance from furniture, drapes, etc. Do not install below electrical outlets
• Steel-sheathed element offers excellent heat transfer and high quality durability
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• UL listed in the US for safety compliance
• Lifetime limited warranty

Cadet electric baseboard heaters are a simple and economical way to add quiet, convection heat wherever it's needed in your home. This white 72-inch heater is an industry-standard size making it ideal for replacement or new construction, and is designed for easy installation with pre-punched mounting marks and wiring at both ends. A thermostat is required for operation (sold separately). Be sure to choose the correct heater size for your room. On the chart below, find the area size you want to heat and then select the corresponding wattage. Proudly made in the USA.

• A permanent, safe, and reliable heating solution with no electrical cords to worry about; requires a hard-wire installation
• Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Mid-sized 1,500-Watt heater effectively warms up to 175 sq. ft. (small to medium-sized rooms)
• 1,500-Watt output with 240-Volt wiring (6.3 Amps, 5,120 BTUs) or 1,125-Watt output with 208-Volt wiring (5.4 Amps, 3,840 BTUs)
• Easy installation with pre-punched mounting marks at 1 in. spaces and accessible front caps, plus wiring at both ends
• Requires a thermostat for temperature control; choose a line voltage electronic or programmable wall thermostat or built-in thermostat (sold separately)
• Place directly on the floor, mount to wall and maintain 12 in. clearance from furniture, drapes, etc. Do not install below electrical outlets
• Steel-sheathed element offers excellent heat transfer and high quality durability
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• UL listed in the US for safety compliance
• Lifetime limited warranty

Cadet electric baseboard heaters are a simple and economical way to add quiet, convection heat wherever it's needed in your home. This white 24-inch heater is an industry-standard size making it ideal for replacement or new construction, and is designed for easy installation with pre-punched mounting marks and wiring at both ends. A thermostat is required for operation (sold separately). Be sure to choose the correct heater size for your room. On the chart below, find the area size you want to heat and then select the corresponding wattage. Proudly made in the USA.

• A permanent, safe, and reliable heating solution with no electrical cords to worry about; requires a hard-wire installation
• Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Compact 350-Watt heater effectively warms up to 50 sq. ft. (small-sized rooms)
• 350-Watt output with 240-Volt wiring (1.5 Amps, 1,195 BTUs) or 262-Watt output with 208-Volt wiring (1.3 Amps, 895 BTUs)
• Easy installation with pre-punched mounting marks at 1 in. spaces and accessible front caps, plus wiring at both ends
• Requires a thermostat for temperature control; choose a line voltage electronic or programmable wall thermostat or built-in thermostat (sold separately)
• Place directly on the floor, mount to wall and maintain 12 in. clearance from furniture, drapes, etc. Do not install below electrical outlets
• Steel-sheathed element offers excellent heat transfer and high quality durability
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• UL listed in the US for safety compliance
• Lifetime limited warranty

A simple and affordable way to add extra warmth to any living space. The Com-Pak fan-forced in-wall electric heater features a compact size and recess-mount design that requires minimal wall space - ideal for renovations or new construction. This hard-wired electric heater provides quick and efficient heat, yet is quiet enough for any room. This product is an interior replacement heater assembly only. A full heater unit requires a wall can and grille sold separately. A thermostat is required for operation; choose a line voltage electronic or programmable wall thermostat or built-in thermostat kit also sold separately.

• Hard-wired 1,500-Watt heater requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing).
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Quiet fan and fast-heating coil element quickly warm a space up to 175 sq. ft.
• 1,500-Watt output with 240-Volt wiring (6.3 Amps, 5,120 BTUs) or 1,125-Watt output with 208-Volt wiring (5.4 Amps, 3,840 BTUs)
• Space-saving, recess-mount design. Rough-in dimensions: 8 in. W x 10.125 in. H x 4 in. D
• An interior replacement heater assembly only. A full heater unit requires a wall can, grille and thermostat (sold separately).
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• A wall or built-in thermostat is required for control
• Needs a wall thermostat or built-in thermostat for temperature control (sold separately)
• UL listed in the US and Canada for safety compliance
• 2-year limited warranty

Cadet electric baseboard heaters are a simple and economical way to add quiet, convection heat wherever it's needed in your home. This white 60-inch heater is an industry-standard size making it ideal for replacement or new construction, and is designed for easy installation with pre-punched mounting marks and wiring at both ends. A thermostat is required for operation (sold separately). Be sure to choose the correct heater size for your room. On the chart below, find the area size you want to heat and then select the corresponding wattage. Proudly made in the USA.

• A permanent, safe, and reliable heating solution with no electrical cords to worry about; requires a hard-wire installation
• Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Mid-sized 1,250-Watt heater effectively warms up to 150 sq. ft. (small to medium-sized rooms)
• 1,250-Watt output with 240-Volt wiring (5.2 Amps, 4,265 BTUs) or 937-Watt output with 208-Volt wiring (4.5 Amps, 3,200 BTUs)
• Easy installation with pre-punched mounting marks at 1 in. spaces and accessible front caps, plus wiring at both ends
• Requires a thermostat for temperature control; choose a line voltage electronic or programmable wall thermostat or built-in thermostat (sold separately)
• Place directly on the floor, mount to wall and maintain 12 in. clearance from furniture, drapes, etc. Do not install below electrical outlets
• Steel-sheathed element offers excellent heat transfer and high quality durability
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• UL listed in the US for safety compliance
• Lifetime limited warranty

A simple and affordable way to add extra warmth to any living space. The Com-Pak fan-forced in-wall electric heater features a compact size and recess-mount design that requires minimal wall space - ideal for renovations or new construction. This hard-wired electric heater provides quick and efficient heat, yet is quiet enough for any room. Built-in thermostat included.

• Hard-wired 1,000-Watt heater requires 120-Volt wiring (single breaker). Before you purchase, confirm you have 120-Volt power supply (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Quiet fan and fast-heating coil element quickly warm a space up to 125 sq. ft.
• 1,000-Watt output with 120-Volt wiring (8.3 Amps, 3,415 BTUs)
• Space-saving, recess-mount design. Rough-in dimensions: 8 in. W x 10.125 in. H x 4 in. D
• A complete unit including wall can, heater, white grille and built-in thermostat
• Smooth, powder coat white paint finish that is resistant to corrosion, scratches and fading
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• Thermostat temperature range: 40F - 85F
• Thermostat temperature range is 40°F - 85°F
• UL listed in the US and Canada for safety compliance
• 2-year limited warranty

Cadet electric baseboard heaters are a simple and economical way to add quiet, convection heat wherever it's needed in your home. This white 36-inch heater is an industry-standard size making it ideal for replacement or new construction, and is designed for easy installation with pre-punched mounting marks and wiring at both ends. A thermostat is required for operation (sold separately). Be sure to choose the correct heater size for your room. On the chart below, find the area size you want to heat and then select the corresponding wattage. Proudly made in the USA.

• A permanent, safe, and reliable heating solution with no electrical cords to worry about; requires a hard-wire installation
• Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Smaller-sized 750-Watt heater effectively warms up to 100 sq. ft. (small-sized rooms)
• 750-Watt output with 240-Volt wiring (3.1 Amps, 2,560 BTUs) or 563-Watt output with 208-Volt wiring (2.7 Amps, 1,925 BTUs)
• Easy installation with pre-punched mounting marks at 1 in. spaces and accessible front caps, plus wiring at both ends
• Requires a thermostat for temperature control; choose a line voltage electronic or programmable wall thermostat or built-in thermostat (sold separately)
• Place directly on the floor, mount to wall and maintain 12 in. clearance from furniture, drapes, etc. Do not install below electrical outlets
• Steel-sheathed element offers excellent heat transfer and high quality durability
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• UL listed in the US for safety compliance
• Lifetime limited warranty

Cadet electric baseboard heaters are a simple and economical way to add quiet, convection heat wherever it's needed in your home. This almond 48-inch heater is an industry-standard size making it ideal for replacement or new construction, and is designed for easy installation with pre-punched mounting marks and wiring at both ends. A thermostat is required for operation (sold separately). Be sure to choose the correct heater size for your room. On the chart below, find the area size you want to heat and then select the corresponding wattage. Proudly made in the USA.

• A permanent, safe, and reliable heating solution with no electrical cords to worry about; requires a hard-wire installation
• Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Mid-sized 1,000-Watt heater effectively warms up to 125 sq. ft. (small to medium-sized rooms)
• 1,000-Watt output with 240-Volt wiring (4.2 Amps, 3,415 BTUs) or 750-Watt output with 208-Volt wiring (3.6 Amps, 2,560 BTUs)
• Easy installation with pre-punched mounting marks at 1 in. spaces and accessible front caps, plus wiring at both ends
• Requires a thermostat for temperature control; choose a line voltage electronic or programmable wall thermostat or built-in thermostat (sold separately)
• Place directly on the floor, mount to wall and maintain 12 in. clearance from furniture, drapes, etc. Do not install below electrical outlets
• Steel-sheathed element offers excellent heat transfer and high quality durability
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• UL listed in the US for safety compliance
• Lifetime limited warranty
• ETL listed for safety
• Lifetime warranty
• Almond color
• Match your heater to the voltage at connection: confirm if you have a 120-Volt or 240-Volt power supply before purchase; you can check your breaker, use a voltmeter, or look at the voltage on your old heater's label if replacing

Cadet electric baseboard heaters are a simple and economical way to add quiet, convection heat wherever it's needed in your home. This almond 30-inch heater is an industry-standard size making it ideal for replacement or new construction, and is designed for easy installation with pre-punched mounting marks and wiring at both ends. A thermostat is required for operation (sold separately). Be sure to choose the correct heater size for your room. On the chart below, find the area size you want to heat and then select the corresponding wattage. Proudly made in the USA.

• A permanent, safe, and reliable heating solution with no electrical cords to worry about; requires a hard-wire installation
• Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Compact 500-Watt heater effectively warms up to 75 sq. ft. (small-sized rooms)
• 500-Watt output with 240-Volt wiring (2.1 Amps, 1,710 BTUs) or 375-Watt output with 208-Volt wiring (1.8 Amps, 1,280 BTUs)
• Easy installation with pre-punched mounting marks at 1 in. spaces and accessible front caps, plus wiring at both ends
• Requires a thermostat for temperature control; choose a line voltage electronic or programmable wall thermostat or built-in thermostat (sold separately)
• Place directly on the floor, mount to wall and maintain 12 in. clearance from furniture, drapes, etc. Do not install below electrical outlets
• Steel-sheathed element offers excellent heat transfer and high quality durability
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• UL listed in the US for safety compliance
• Lifetime limited warranty
• ETL listed for safety
• Lifetime warranty
• Almond color
• Match your heater to the voltage at connection: confirm if you have a 120-Volt or 240-Volt power supply before purchase; you can check your breaker, use a voltmeter, or look at the voltage on your old heater's label if replacing

The Cadet Electric Baseboard Heater utilizes convection heat to provide efficient warmth. The quiet operation, and low cost installation make it a perfect choice for a bedroom or any area of your home that requires additional warmth. Designed for ease of installation with pre-punched mounting holes, this hardwired heater can be wired at either end. Rugged U.S.A. steel construction with powder coated white paint for a durable, premium finish. A thermostat is required and sold separately.

• No cords - requires hard-wired installation for a permanent, safe, reliable heating solution
• Thermostat sold separately - choose a line voltage wall thermostat or BTF unit-mount thermostat for temperature control
• Operates 1000-Watt at 120-Volt
• Convection heating helps circulate air to heat a space up to 150 sq. ft.
• Timeless and proven fin construction maximizes surface area to funnel heated air and aid convection of air flow
• Contemporary baseboard design is built to industry standard lengths to easily replace your current baseboard or match any new construction footprint
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• Powder coating provides a smooth finish resistant to corrosion, scratches, fading, and wear
• Steel-sheathed element offers excellent heat transfer and high quality durability
• Pre-punched case at 1 in. intervals and accessible front caps provide easy installation of heater
• Universal wiring allows you to install at either end of baseboard
• Quiet operation makes it perfect for any area in the home, especially bedrooms
• ETL listed for safety
• Lifetime warranty
• White color
• Match your heater to the voltage at connection: confirm if you have a 120-Volt or 240-Volt power supply before purchase; you can check your breaker, use a voltmeter, or look at the voltage on your old heater's label if replacing

Simple to use, twist dial mechanical single-pole thermostat. Can replace most wall-mounted line voltage thermostats and the color-coded wires make installation simple. A cost-effective and easy way to control room temperature.

• For use with line voltage 120, 240 or 208-Volt electric baseboard and wall heaters (controls up to 5,280-Watt at 240-Volt or 2,640-Watt at 120-Volt output)
• Easily replaces most line voltage wall-mounted thermostats
• Simple 2-wire installation (single-pole)
• 22 Amp
• Thermostat temperature range is 40°F - 85°F
• White
• UL listed in the US and Canada for safety compliance
• 1-year limited warranty

Easy to install and operate, this Cadet baseboard-mount single-pole thermostat provides simple temperature control. Designed exclusively to fit on Cadet electric baseboard heaters, this thermostat can be mounted to either end of the heater and fits seamlessly onto the heater's profile. A large, twist-dial knob adjusts smoothly and features a low position that turns the heater on in cold rooms automatically.

• Provides built-in temperature control on the baseboard heater, eliminating the need for a wall thermostat and additional wiring
• Compatible with all voltages of Cadet electric baseboard heaters
• Seamlessly mounts to either end of a Cadet baseboard heater
• Simple 2-wire installation (single-pole)
• 22 Amp
• Temperature range is 40°F - 85°F
• White (also available in Almond)
• Accessory to UL listing of Cadet electric baseboard heaters
• 1-year limited warranty

A simple and affordable way to add extra warmth to any living space. The Com-Pak fan-forced in-wall electric heater features a compact size and recess-mount design that requires minimal wall space - ideal for renovations or new construction. This hard-wired electric heater provides quick and efficient heat, yet is quiet enough for any room. This product is an interior replacement heater assembly only. A full heater unit requires a wall can and grille sold separately. A thermostat is required for operation; choose a line voltage electronic or programmable wall thermostat or built-in thermostat kit also sold separately.

• Hard-wired 2,000-Watt heater requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing).
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Quiet fan and fast-heating coil element quickly warm a space up to 250 sq. ft.
• 2,000-Watt output with 240-Volt wiring (8.3 Amps, 6,825 BTUs) or 1,500-Watt output with 208-Volt wiring (7.2 Amps, 5,120 BTUs)
• Space-saving, recess-mount design. Rough-in dimensions: 8 in. W x 10.125 in. H x 4 in. D
• An interior replacement heater assembly only. A full heater unit requires a wall can, grille and thermostat (sold separately).
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• A wall or built-in thermostat is required for control
• UL listed in the US and Canada for safety compliance
• 2-year limited warranty

A simple and affordable way to add extra warmth to any living space. The Com-Pak fan-forced in-wall electric heater features a compact size and recess-mount design that requires minimal wall space - ideal for renovations or new construction. This hard-wired electric heater provides quick and efficient heat, yet is quiet enough for any room. Built-in thermostat included.

• Hard-wired 2,000-Watt heater requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing).
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Quiet fan and fast-heating coil element quickly warm a space up to 250 sq. ft.
• 2,000-Watt output with 240-Volt wiring (8.3 Amps, 6,825 BTUs) or 1,500-Watt output with 208-Volt wiring (7.2 Amps, 5,120 BTUs)
• Space-saving, recess-mount design. Rough-in dimensions: 8 in. W x 10.125 in. H x 4 in. D
• A complete unit including wall can, heater, white grille and built-in thermostat
• Smooth, powder coat white paint finish that is resistant to corrosion, scratches and fading
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• Thermostat temperature range: 40F - 85F
• Thermostat temperature range is 40°F - 85°F
• UL listed in the US and Canada for safety compliance
• 2-year limited warranty

Use up to 30% less energy and experience more comfort with precise, consistent temperature control. The Energy Plus in-wall fan-forced electric heater uses an intelligent control and auto adjusting fan speed to maintain the desired temperature for your room within 1°. Delivering only the heat you need for maximum efficiency. This hard-wired electric heater warms small to medium sized rooms up to 175 sq. ft.

• Hard-wired multi-volt fan heater with unique power supply smart sensor takes all the guesswork out of installation by auto-adjusting the heater voltage to match your voltage supply. No need to worry about damaging the heater or whether you have 120-Volt, 208-Volt, or 240-Volt wiring. Before purchasing, confirm your power supply voltage to determine the heater's output (check your breaker, use a voltmeter, or refer to your old heater's label if replacing).
• Multi-Volt options: 1,600-Watt output at 240 volts (6.7 Amps, 5,460 BTUs); 1,500-Watt output at 208 volts (7.2 Amps, 5,120 BTUs); 1,000-Watt output at 120 volts (8.3 Amps, 3,412 BTUs)
• Easily update old heaters: uses same wall can as many Cadet Com-Pak series units, so no wall patchwork or additional wall board cut outs should be required
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Space-saving, recess-mount design. Rough-in dimensions: 8 in. W x 10.125 in. H x 4 in. D
• A complete unit including wall can, heater, white grille and built-in digital thermostat
• Smooth, powder coat white paint finish that is resistant to corrosion, scratches and fading
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• Complete unit includes wall can, heat box and grill and digital thermostat
• Tamper-proof settings let you lock in minimm and maximum temperature points and a fan-only mode lets you circulate air year round without heat
• ETL listed in the US and Canada for safety compliance
• 5-year limited warranty

A simple and affordable way to add extra warmth to any living space. The Com-Pak fan-forced in-wall electric heater features a compact size and recess-mount design that requires minimal wall space - ideal for renovations or new construction. This hard-wired electric heater provides quick and efficient heat, yet is quiet enough for any room. Built-in thermostat included.

• Hard-wired 1,000-Watt heater requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing).
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Quiet fan and fast-heating coil element quickly warm a space up to 125 sq. ft.
• 1,000-Watt output with 240-Volt wiring (4.2 Amps, 3,415 BTUs) or 750-Watt output with 208-Volt wiring (3.6 Amps, 2,560 BTUs)
• Space-saving, recess-mount design. Rough-in dimensions: 8 in. W x 10.125 in. H x 4 in. D
• A complete unit including wall can, heater, white grille and built-in thermostat
• Smooth, powder coat white paint finish that is resistant to corrosion, scratches and fading
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• Thermostat temperature range: 40F - 85F
• Thermostat temperature range is 40°F - 85°F
• UL listed in the US and Canada for safety compliance
• 2-year limited warranty

An ideal choice for heating larger rooms with just one heater--two heaters behind a single grille quickly heat a large area and help eliminate drafts and cold spots in your open areas, such as a foyer. A simple and affordable way to add extra warmth to any living space. The Com-Pak Twin fan-forced in-wall electric heater features a recess-mount design that requires minimal wall space - ideal for renovations or new construction. This hard-wired electric heater provides quick and efficient heat. Built-in thermostat included.

• Hard-wired 4,000-Watt heater requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing).
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Two fans and two fast-heating coil elements quickly warm a space up to 500 sq. ft.
• 4,000-Watt output with 240-Volt wiring (16.7 Amps, 13,650 BTUs) or 3,000-Watt output with 208-Volt wiring (14.4 Amps, 10,240 BTUs)
• Space-saving, recess-mount design for larger rooms. Rough-in dimensions: 14.5 in. W x 10.125 in. H x 4 in. D
• A complete unit including wall can, heater, white grille and built-in thermostat
• Smooth, powder coat white paint finish that is resistant to corrosion, scratches and fading
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• UL listed for safety
• Thermostat temperature range is 40°F - 85°F
• UL listed in the US and Canada for safety compliance

A simple and affordable way to add extra warmth to any living space. The Com-Pak fan-forced in-wall electric heater features a compact size and recess-mount design that requires minimal wall space - ideal for renovations or new construction. This hard-wired electric heater provides quick and efficient heat, yet is quiet enough for any room. Built-in thermostat included.

• Hard-wired 1,500-Watt heater requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing).
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Quiet fan and fast-heating coil element quickly warm a space up to 175 sq. ft.
• 1,500-Watt output with 240-Volt wiring (6.3 Amps, 5,120 BTUs) or 1,125-Watt output with 208-Volt wiring (5.4 Amps, 3,840 BTUs)
• Space-saving, recess-mount design. Rough-in dimensions: 8 in. W x 10.125 in. H x 4 in. D
• A complete unit including wall can, heater, white grille and built-in thermostat
• Smooth, powder coat white paint finish that is resistant to corrosion, scratches and fading
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• Thermostat temperature range: 40F - 85F
• Thermostat temperature range is 40°F - 85°F
• UL listed in the US and Canada for safety compliance
• 2-year limited warranty

Easy to install and operate, this Cadet baseboard-mount double-pole thermostat provides simple temperature control. Designed exclusively to fit on Cadet electric baseboard heaters, this thermostat can be mounted to either end of the heater and fits seamlessly onto the heater's profile. A large, twist-dial knob adjusts smoothly and features a low position and additionally an off setting for added peace of mind.

• Provides built-in temperature control on the baseboard heater, eliminating the need for a wall thermostat and additional wiring
• Compatible with all voltages of Cadet electric baseboard heaters
• Seamlessly mounts to either end of a Cadet baseboard heater
• Simple 4-wire installation (double-pole) and includes an off setting
• 22 Amp
• Temperature range is 40°F - 85°F
• White (also available in Almond)
• Accessory to UL listing of Cadet electric baseboard heaters
• 1-year limited warranty

The Cadet Electric Baseboard Heater utilizes convection heat to provide efficient warmth. The quiet operation, and low cost installation make it a perfect choice for a bedroom or any area of your home that requires additional warmth. Designed for ease of installation with pre-punched mounting holes, this hardwired heater can be wired at either end. Rugged U.S.A. steel construction with powder coated white paint for a durable, premium finish. A thermostat is required and sold separately.

• No cords - requires hard-wired installation for a permanent, safe, reliable heating solution
• Thermostat sold separately - choose a line voltage wall thermostat or BTF unit-mount thermostat for temperature control
• Operates 500-Watt at 120-Volt
• Convection heating helps circulate air to heat a space up to 75 sq. ft.
• Timeless and proven fin construction maximizes surface area to funnel heated air and aid convection of air flow
• Contemporary baseboard design is built to industry standard lengths to easily replace your current baseboard or match any new construction footprint
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• Powder coating provides a smooth finish resistant to corrosion, scratches, fading, and wear
• Steel-sheathed element offers excellent heat transfer and high quality durability
• Pre-punched case at 1 in. intervals and accessible front caps provide easy installation of heater
• Universal wiring allows you to install at either end of baseboard
• Quiet operation makes it perfect for any area in the home, especially bedrooms
• ETL listed for safety
• Lifetime warranty
• White color
• Match your heater to the voltage at connection: confirm if you have a 120-Volt or 240-Volt power supply before purchase; you can check your breaker, use a voltmeter, or look at the voltage on your old heaters label if replacing