Cadet electric baseboard heaters are a simple and economical way to add quiet, convection heat wherever it's needed in your home. This white 24-inch heater is an industry-standard size making it ideal for replacement or new construction, and is designed for easy installation with pre-punched mounting marks and wiring at both ends. A thermostat is required for operation (sold separately). Be sure to choose the correct heater size for your room. On the chart below, find the area size you want to heat and then select the corresponding wattage. Proudly made in the USA.

• A permanent, safe, and reliable heating solution with no electrical cords to worry about; requires a hard-wire installation
• Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Compact 350-Watt heater effectively warms up to 50 sq. ft. (small-sized rooms)
• 350-Watt output with 240-Volt wiring (1.5 Amps, 1,195 BTUs) or 262-Watt output with 208-Volt wiring (1.3 Amps, 895 BTUs)
• Easy installation with pre-punched mounting marks at 1 in. spaces and accessible front caps, plus wiring at both ends
• Requires a thermostat for temperature control; choose a line voltage electronic or programmable wall thermostat or built-in thermostat (sold separately)
• Place directly on the floor, mount to wall and maintain 12 in. clearance from furniture, drapes, etc. Do not install below electrical outlets
• Steel-sheathed element offers excellent heat transfer and high quality durability
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• UL listed in the US for safety compliance
• Lifetime limited warranty

Cadet electric baseboard heaters are a simple and economical way to add quiet, convection heat wherever it's needed in your home. This white 60-inch heater is an industry-standard size making it ideal for replacement or new construction, and is designed for easy installation with pre-punched mounting marks and wiring at both ends. A thermostat is required for operation (sold separately). Be sure to choose the correct heater size for your room. On the chart below, find the area size you want to heat and then select the corresponding wattage. Proudly made in the USA.

• A permanent, safe, and reliable heating solution with no electrical cords to worry about; requires a hard-wire installation
• Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Mid-sized 1,250-Watt heater effectively warms up to 150 sq. ft. (small to medium-sized rooms)
• 1,250-Watt output with 240-Volt wiring (5.2 Amps, 4,265 BTUs) or 937-Watt output with 208-Volt wiring (4.5 Amps, 3,200 BTUs)
• Easy installation with pre-punched mounting marks at 1 in. spaces and accessible front caps, plus wiring at both ends
• Requires a thermostat for temperature control; choose a line voltage electronic or programmable wall thermostat or built-in thermostat (sold separately)
• Place directly on the floor, mount to wall and maintain 12 in. clearance from furniture, drapes, etc. Do not install below electrical outlets
• Steel-sheathed element offers excellent heat transfer and high quality durability
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• UL listed in the US for safety compliance
• Lifetime limited warranty

Cadet electric baseboard heaters are a simple and economical way to add quiet, convection heat wherever it's needed in your home. This white 36-inch heater is an industry-standard size making it ideal for replacement or new construction, and is designed for easy installation with pre-punched mounting marks and wiring at both ends. A thermostat is required for operation (sold separately). Be sure to choose the correct heater size for your room. On the chart below, find the area size you want to heat and then select the corresponding wattage. Proudly made in the USA.

• A permanent, safe, and reliable heating solution with no electrical cords to worry about; requires a hard-wire installation
• Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
• Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
• Smaller-sized 750-Watt heater effectively warms up to 100 sq. ft. (small-sized rooms)
• 750-Watt output with 240-Volt wiring (3.1 Amps, 2,560 BTUs) or 563-Watt output with 208-Volt wiring (2.7 Amps, 1,925 BTUs)
• Easy installation with pre-punched mounting marks at 1 in. spaces and accessible front caps, plus wiring at both ends
• Requires a thermostat for temperature control; choose a line voltage electronic or programmable wall thermostat or built-in thermostat (sold separately)
• Place directly on the floor, mount to wall and maintain 12 in. clearance from furniture, drapes, etc. Do not install below electrical outlets
• Steel-sheathed element offers excellent heat transfer and high quality durability
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• UL listed in the US for safety compliance
• Lifetime limited warranty

The Cadet Electric Baseboard Heater utilizes convection heat to provide efficient warmth. The quiet operation, and low cost installation make it a perfect choice for a bedroom or any area of your home that requires additional warmth. Designed for ease of installation with pre-punched mounting holes, this hardwired heater can be wired at either end. Rugged U.S.A. steel construction with powder coated white paint for a durable, premium finish. A thermostat is required and sold separately.

• No cords - requires hard-wired installation for a permanent, safe, reliable heating solution
• Thermostat sold separately - choose a line voltage wall thermostat or BTF unit-mount thermostat for temperature control
• Operates 1000-Watt at 120-Volt
• Convection heating helps circulate air to heat a space up to 150 sq. ft.
• Timeless and proven fin construction maximizes surface area to funnel heated air and aid convection of air flow
• Contemporary baseboard design is built to industry standard lengths to easily replace your current baseboard or match any new construction footprint
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• Powder coating provides a smooth finish resistant to corrosion, scratches, fading, and wear
• Steel-sheathed element offers excellent heat transfer and high quality durability
• Pre-punched case at 1 in. intervals and accessible front caps provide easy installation of heater
• Universal wiring allows you to install at either end of baseboard
• Quiet operation makes it perfect for any area in the home, especially bedrooms
• ETL listed for safety
• Lifetime warranty
• White color
• Match your heater to the voltage at connection: confirm if you have a 120-Volt or 240-Volt power supply before purchase; you can check your breaker, use a voltmeter, or look at the voltage on your old heater's label if replacing

The Cadet Electric Baseboard Heater utilizes convection heat to provide efficient warmth. The quiet operation, and low cost installation make it a perfect choice for a bedroom or any area of your home that requires additional warmth. Designed for ease of installation with pre-punched mounting holes, this hardwired heater can be wired at either end. Rugged U.S.A. steel construction with powder coated white paint for a durable, premium finish. A thermostat is required and sold separately.

• No cords - requires hard-wired installation for a permanent, safe, reliable heating solution
• Thermostat sold separately - choose a line voltage wall thermostat or BTF unit-mount thermostat for temperature control
• Operates 500-Watt at 120-Volt
• Convection heating helps circulate air to heat a space up to 75 sq. ft.
• Timeless and proven fin construction maximizes surface area to funnel heated air and aid convection of air flow
• Contemporary baseboard design is built to industry standard lengths to easily replace your current baseboard or match any new construction footprint
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• Powder coating provides a smooth finish resistant to corrosion, scratches, fading, and wear
• Steel-sheathed element offers excellent heat transfer and high quality durability
• Pre-punched case at 1 in. intervals and accessible front caps provide easy installation of heater
• Universal wiring allows you to install at either end of baseboard
• Quiet operation makes it perfect for any area in the home, especially bedrooms
• ETL listed for safety
• Lifetime warranty
• White color
• Match your heater to the voltage at connection: confirm if you have a 120-Volt or 240-Volt power supply before purchase; you can check your breaker, use a voltmeter, or look at the voltage on your old heaters label if replacing