Assembled in Cleveland, Ohio, this radiant 10000 - 30000 BTU Liquid Propane Tank Top heaters are the perfect solution for a variety of outdoor heating applications. This heater is constructed with high quality chrome and stainless-steel components to bring you reliable heat on the go. With its adjustable high-medium-low regulator and soft nose P.O.L., the MH30T is easy to use and quick to set up. Adjustable swivel head design allows you to put heat precisely where you want it. Its higher-grade mesh brings you longer lasting durability, while its standard safety shut-off switch brings you peace of mind.

• 10,000 - 30,000 BTU per hour
• For use with propane gas
• Hi-med-low regulator
• Two tip-over safety shutoff
• Wind resistant screen
• Hi-med-lo regulator
• Cylinder not included
• Operate one or two burners at a time
• Directional, adjustable heads
• Polished chrome reflector
• Outdoor use only

Wherever your next outdoor excursion takes you, the heat of the MH15T can tag along. The heater's compact size makes it easy to move and quick to set up. Just screw the left hand thread attachment onto a 20-lb propane tank and fire it up. Three heat settings give up to 15,000 BTU to keep you warm while setting up a tent or laying a foundation. With a tip-over safety switch, the heater keeps you safe while you keep warm. From the lakeside to the campsite to the worksite, the MH15T provides the heat you need where you need it.

• Single adjustable burner head
• 3 heat settings: 10,000 - 12,500 - 15,000
• Accidental tip-over safety shut-off
• Instant, quiet, radiant heat
• Mounts directly to 20 lb. propane tank
• Match lit ignition - no electricity needed
• Heavy-duty bracket
• Standard POL tank connection
• Approximate 29 hour run time on high with a 20 lb. propane tank
• High grade stainless burning screen
• Outdoor use only

Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort. This 175,000 BTU burner box goes with the Heatstar ERXL 50 ft. or 60 ft. Tube System, and comes ready for natural gas (NG), and includes a propane (LP) conversion kit. All components are name-brand and non-proprietary. This heater must be vented in accordance with the specifications contained in its manual and with national codes and any state, provincial or local codes which may apply. Warning: Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operation, and maintenance instructions thoroughly before installing or servicing this equipment. For assistance or additional information consult a qualified installer, service agency, or gas supplier.

• For use with the Heatstar ERXL 50 ft. or 60 ft. tube system
• Great for warehouses, repair shops, truck terminals, aircraft hangers, loading docks, sporting arenas, and farm buildings
• Sealed burner box control with underside sight glass
• 24-Volt thermostat, and 90 degree elbow or 180 U bend tubes also available
• 10 year warranty (Limited to 2 years in caustic environments, such as car washes)
• CSA approved

The Mr. Heater High-Intensity Radiant Overhead HS9120SPLP Liquid Propane Auto Spark Ignition heater directs radiant heat to floor-level objects, which in turn, heat surrounding air to the desired temperature. Personnel and objects at floor level enjoy instant, cost-saving comfort. Ideal for use in drafty or windy areas like a loading dock or mechanic bays where doors are open during Winter conditions. At 99.9% efficiency, it transfers almost all of the fuel it burns directly into clean safe radiant heat. It is equipped with an auto-spark ignition system, a safety shut-off on the pilot and burner and ships with a 120-Volt /24-Volt AC/40-Volt Amp transfomer. Mr. Heater's high-intensity heaters are protected by a 10-year, pro-rated burner assembly warranty and a limited 1-year gas control warranty. Consult the user manual for installation instructions and for clearance to combustible guidance.

• Runs on liquid propane
• 120,000 BTU
• Great for loading docks, warehouses, factories, farm buildings, repair shops, indoor sports arenas and entrance ways
• Instant heat with a quiet, clean, odor-free operation
• No direct venting required
• Built-in automatic spark ignition with a safety burner shutoff, 24-Volt ac control with intermittent pilot
• Transformer 120-Volt/24-Volt shipped loose with heater
• Includes additional orifices to convert to 100,000 BTU
• Limited 10-year warranty on burner assembly
• Limited 1-year warranty on gas control
• CSA certified

Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort. This 80,000 BTU burner box goes with the Heatstar ERXL 30 ft. Tube System, and comes ready for propane (LP). All components are name-brand and non-proprietary. This heater must be vented in accordance with the specifications contained in its manual and with national codes and any state, provincial or local codes which may apply. Warning: Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operation, and maintenance instructions thoroughly before installing or servicing this equipment. For assistance or additional information consult a qualified installer, service agency, or gas supplier.

• For use with the Heatstar ERXL 30 ft. tube system
• Great for warehouses, repair shops, truck terminals, aircraft hangers, loading docks, sporting arenas, and farm buildings
• Sealed burner box control with underside sight glass
• 24-Volt thermostat, and 90 degree elbow or 180 U bend tubes also available
• 10 year warranty (Limited to 2 years in caustic environments, such as car washes)
• CSA approved

Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort. This 60,000 BTU burner box goes with the Heatstar ERXL 20 ft. Tube System, and comes ready for propane (LP). All components are name-brand and non-proprietary. This heater must be vented in accordance with the specifications contained in its manual and with national codes and any state, provincial or local codes which may apply. Warning: Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operation, and maintenance instructions thoroughly before installing or servicing this equipment. For assistance or additional information consult a qualified installer, service agency, or gas supplier.

• For use with the Heatstar ERXL 20 ft. tube system
• Great for warehouses, repair shops, truck terminals, aircraft hangers, loading docks, sporting arenas, and farm buildings
• Sealed burner box control with underside sight glass
• 24-Volt thermostat, and 90 degree elbow or 180 U bend tubes also available
• 10 year warranty (Limited to 2 years in caustic environments, such as car washes)
• CSA approved

Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort. This 60,000 BTU burner box goes with the Heatstar ERXL 20 ft. Tube System, and comes ready for natural gas (NG), and includes a propane (LP) conversion kit. All components are name-brand and non-proprietary. This heater must be vented in accordance with the specifications contained in its manual and with national codes and any state, provincial or local codes which may apply. Warning: Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operation, and maintenance instructions thoroughly before installing or servicing this equipment. For assistance or additional information consult a qualified installer, service agency, or gas supplier.

• For use with the Heatstar ERXL 20 ft. tube system
• Great for warehouses, repair shops, truck terminals, aircraft hangers, loading docks, sporting arenas, and farm buildings
• Sealed burner box control with underside sight glass
• 24-Volt thermostat, and 90 degree elbow or 180 U bend tubes also available
• 10 year warranty (Limited to 2 years in caustic environments, such as car washes)
• 10 year warranty (Limited to 2 years in caustic environments, such as car washes)

Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort. This 100,000 BTU burner box goes with the Heatstar ERXL 30 ft. or 40 ft. Tube System, and comes ready for propane (LP). All components are name-brand and non-proprietary. This heater must be vented in accordance with the specifications contained in its manual and with national codes and any state, provincial or local codes which may apply. Warning: Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operation, and maintenance instructions thoroughly before installing or servicing this equipment. For assistance or additional information consult a qualified installer, service agency, or gas supplier.

• For use with the Heatstar ERXL 30 ft. or 40 ft. tube system
• Great for warehouses, repair shops, truck terminals, aircraft hangers, loading docks, sporting arenas, and farm buildings
• Sealed burner box control with underside sight glass
• 24-Volt thermostat, and 90 degree elbow or 180 U bend tubes also available
• 10 year warranty (Limited to 2 years in caustic environments, such as car washes)
• CSA approved

Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort. This 80,000 BTU burner box goes with the Heatstar ERXL 30 ft. Tube System, and comes ready for natural gas (NG), and includes a propane (LP) conversion kit. All components are name-brand and non-proprietary. This heater must be vented in accordance with the specifications contained in its manual and with national codes and any state, provincial or local codes which may apply. Warning: Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operation, and maintenance instructions thoroughly before installing or servicing this equipment. For assistance or additional information consult a qualified installer, service agency, or gas supplier.

• For use with the Heatstar ERXL 30 ft. tube system
• Great for warehouses, repair shops, truck terminals, aircraft hangers, loading docks, sporting arenas, and farm buildings
• Sealed burner box control with underside sight glass
• 24-Volt thermostat, and 90 degree elbow or 180 U bend tubes also available
• 10 year warranty (Limited to 2 years in caustic environments, such as car washes)
• CSA approved

Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort. This 125,000 BTU burner box goes with the Heatstar ERXL 40 ft. or 50 ft. Tube System, and comes ready for propane (LP). All components are name-brand and non-proprietary. This heater must be vented in accordance with the specifications contained in its manual and with national codes and any state, provincial or local codes which may apply. Warning: Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operation, and maintenance instructions thoroughly before installing or servicing this equipment. For assistance or additional information consult a qualified installer, service agency, or gas supplier.

• For use with the Heatstar ERXL 40 ft. or 50 ft. tube system
• Great for warehouses, repair shops, truck terminals, aircraft hangers, loading docks, sporting arenas, and farm buildings
• Sealed burner box control with underside sight glass
• 24-Volt thermostat, and 90 degree elbow or 180 U bend tubes also available
• 10 year warranty (Limited to 2 years in caustic environments, such as car washes)
• CSA approved

The High Intensity Radiant Restaurant/Patio 30,000 BTU Natural Gas heater is all black heater and designed to blend into restaurants, patios and outdoor kitchen areas. It warms people and floor-level objects like the suns rays, offering a comfortable, efficient heating solution. Has automatic spark ignition on the pilot with a safety burner shut-off.

• Great for loading docks, warehouses, factories, farm buildings, repair shops, indoor sport arenas, and entrance ways
• Includes additional orifices to convert to 30,000 BTU
• Can be used with a 24 or 120-Volt thermostat
• US remote
• Limited 1 year warranty on gas control, limited 3 year warranty on burner assembly
• Made from corrosion resistant materials
• Limited 1-year warranty on gas control, pro-rated 10-year warranty on burner assembly
• CSA certified

Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort. This 125,000 -175,000 BTU burner box goes with the Heatstar ERXL/ER2STG 50 ft. or 60 ft. Tube System, and comes ready for propane (LP). All components are name-brand and non-proprietary. This heater must be vented in accordance with the specifications contained in its manual and with national codes and any state, provincial or local codes which may apply. Warning: Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operation, and maintenance instructions thoroughly before installing or servicing this equipment. For assistance or additional information consult a qualified installer, service agency, or gas supplier.

• Low stage is 125,000 BTU; high stage is 175,000 BTU
• For use with the Heatstar ERXL/ER2STG 50 ft. or 60 ft. tube system
• Great for warehouses, repair shops, truck terminals, aircraft hangers, loading docks, sporting arenas, and farm buildings
• Sealed burner box control with underside sight glass
• 24-Volt thermostat, and 90 degree elbow or 180 U bend tubes also available
• 10 year warranty (Limited to 2 years in caustic environments, such as car washes)
• CSA approved

The HEATSTAR High Intensity Radiant Overhead 4040 Natural Gas heaters direct line of site radiant heat to floor-level objects, which in turn, heat surrounding air to the desired temperature. They are ideal for use in drafty or windy areas like a loading dock or auto mechanic bays where doors are open during winter conditions. Has a spark ignition system with a safety shut-off on the pilot and burner and ships with a 40VA transformer.

• Great for loading docks, warehouses, factories, farm buildings, repair shops, indoor sport arenas, and entrance ways
• Includes additional orifices to convert to 30,000 BTU
• Includes a 40VA transformer
• No direct venting required
• Easy to install and maintenance free
• Made from corrosion resistant materials
• Limited 1-year warranty on gas control, pro-rated 10-year warranty on burner assembly
• CSA certified

The Architect Collection glass front radiant heater offers high efficiency with a gas luminous heater that is designed and developed with the most modern and functional manufacturing systems in mind. It is lightweight, compact, and easy to install. The ceramic glass presents an excellent resistance to thermal shock, increasing the radiant performance. The gas luminous heater stands out for reliability: the burner is protected between casing and glass, ensuring exceptional resistance to wind.

• Runs on propane or natural gas
• Highly efficient and quiet radiant heat
• Included pivot brackets offer directional control and coverage of heat
• Includes ON/OFF remote
• Limited 1-year warranty on gas control
• CSA certified

Elevate your commercial heating experience with the Mr. Heater 60 ft., 4 in. Dia Replacement Tube Set. Designed to seamlessly integrate with ERXL Burner Boxes delivering 150,000 to 175,000 BTUs, this Mr. Heater Tube Set ensures a smooth and stress-free installation process. Time is money and we value both. Our tube set is designed for straightforward installation, including everything you need for an efficient setup - tubes, reflectors, hangers, couplers and a vent adapter.

• Replacement tube set for ERXL
• 60 ft. tube set with 4 in. tube diameter
• Tube set includes, tubes, reflectors, hangers, couplers and vent adapter
• Mounting height range of 10 ft. to 14 ft.

The Heatstar High Intensity Radiant Overhead 9120 Natural Gas heaters direct line of site radiant heat to floor-level objects, which in turn, heat surrounding air to the desired temperature. They are ideal for use in drafty or windy areas like a loading dock or auto mechanic bays where doors are open during winter conditions. Has a spark ignition system with a safety shut-off on the pilot and burner and ships with a 40VA transformer.

• Great for loading docks, warehouses, factories, farm buildings, repair shops, indoor sport arenas, and entrance ways
• Includes additional orifices to convert to 100,000 BTU
• Includes a 40VA transformer
• Can be used with a 24-Volt thermostat
• Easy to install and maintenance free
• Made from corrosion resistant materials
• Limited 1-year warranty on gas control, pro-rated 10-year warranty on burner assembly
• CSA certified

Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort. This 150,000 BTU burner box goes with the Heatstar ERXL 50 ft. or 60 ft. Tube System, and comes ready for natural gas (NG), and includes a propane (LP) conversion kit. All components are name-brand and non-proprietary. This heater must be vented in accordance with the specifications contained in its manual and with national codes and any state, provincial or local codes which may apply. Warning: Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operation, and maintenance instructions thoroughly before installing or servicing this equipment. For assistance or additional information consult a qualified installer, service agency, or gas supplier.

• For use with the Heatstar ERXL 50 ft. or 60 ft. tube system
• Great for warehouses, repair shops, truck terminals, aircraft hangers, loading docks, sporting arenas, and farm buildings
• Sealed burner box control with underside sight glass
• 24-Volt thermostat, and 90 degree elbow or 180 U bend tubes also available
• 10 year warranty (Limited to 2 years in caustic environments, such as car washes)
• CSA approved

Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort. This 80,000 -125,000 BTU burner box goes with the Heatstar ERXL/ER2STG 40 ft. or 50 ft. Tube System, and comes ready for natural gas (NG), and includes a propane (LP) conversion kit. All components are name-brand and non-proprietary. This heater must be vented in accordance with the specifications contained in its manual and with national codes and any state, provincial or local codes which may apply. Warning: Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operation, and maintenance instructions thoroughly before installing or servicing this equipment. For assistance or additional information consult a qualified installer, service agency, or gas supplier.

• Low stage is 80,000 BTU; high stage is 125,000 BTU
• For use with the Heatstar ERXL/ER2STG 40 ft. or 50 ft. tube system
• Great for warehouses, repair shops, truck terminals, aircraft hangers, loading docks, sporting arenas, and farm buildings
• Sealed burner box control with underside sight glass
• 24-Volt thermostat, and 90 degree elbow or 180 U bend tubes also available
• elbow or 180 U bend tubes also available
• CSA approved

The HS45GSP in Natural Gas Tube Heater is a source for efficient and effective low-intensity infrared radiant heat. At 45,000 BTU, it provides uniform heat distribution while operating quietly. The compact 3in aluminized steel U-tube design along with the polished deep-dish reflector is perfect for all garages, shops and patios.

• Compact 3 in. aluminized steel U-tube design
• Provides uniform heat distribution
• Quiet operation
• Low clearance requirements

Elevate your commercial heating experience with the Mr. Heater 50 ft., 4 in. Dia Replacement Tube Set. Designed to seamlessly integrate with ERXL Burner Boxes delivering 125,000 to 175,000 BTUs, this Mr. Heater Tube Set ensures a smooth and stress-free installation process. Time is money and we value both. Our tube set is designed for straightforward installation, including everything you need for an efficient setup, tubes, reflectors, hangers, couplers and a vent adapter.

• Replacement tube set for ERXL
• 50 ft. tube set with 4 in. tube diameter
• Tube set includes, tubes, reflectors, hangers, couplers and vent adapter
• Mounting height range of 10 ft. to 14 ft.

Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort. This 60,000 -100,000 BTU burner box goes with the Heatstar ERXL/ER2STG 30 ft. Tube System, and comes ready for propane (LP). All components are name-brand and non-proprietary. This heater must be vented in accordance with the specifications contained in its manual and with national codes and any state, provincial or local codes which may apply. Warning: Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operation, and maintenance instructions thoroughly before installing or servicing this equipment. For assistance or additional information consult a qualified installer, service agency, or gas supplier.

• Heatstar low intensity radiant tube heaters direct line-of-sight radiant heat to floor-level objects, which in turn, heat surrounding air to desired temperature
• Low stage is 60,000 BTU; high stage is 100,000 BTU
• For use with the Heatstar ERXL/ER2STG 30 ft. tube system
• Great for warehouses, repair shops, truck terminals, aircraft hangers, loading docks, sporting arenas, and farm buildings
• Sealed burner box control with underside sight glass
• 24-Volt thermostat, and 90
• 10 year warranty (limited to 2 years in caustic environments, such as car washes)
• CSA approved

Elevate your commercial heating experience with the Mr. Heater 30 ft. Replacement Tube Set. Designed to seamlessly integrate with ERXL Burner Boxes delivering 100,000 BTUs, this Mr. Heater Tube Set ensures a smooth and stress-free installation process. Time is money and we value both. Our tube set is designed for straightforward installation, including everything you need for an efficient setup, tubes, reflectors, hangers, couplers, vent adapter and 5 ft. turbulator.

• Replacement tube set for ERXL
• 30 ft. tube system
• Compatible with ERXL burner boxes 100,000 BTU or ER2STG-NG/LP 100,000 BTU
• Tube set includes, tubes, reflectors, hangers, couplers and vent adapter and 5 ft. turbulator
• Mounting height range of 12 ft. to 15 ft.

Elevate your commercial heating experience with the Mr. Heater 20 ft. replacement tube set. Designed to seamlessly integrate with ERXL Burner Boxes delivering 60,000 to 80,000 BTUs, this Mr. Heater tube set ensures a smooth and stress-free installation process. Time is money and we value both. Our tube set is designed for straightforward installation, including everything you need for an efficient setup, tubes, reflectors, hangers, couplers, vent adapter and 10 ft. turbulator.

• Replacement tube set for ERXL
• 20 ft. tube system
• Tube set includes, tubes, reflectors, hangers, couplers and vent adapter and 10 ft. turbulator
• Mounting height range of 12 ft. to 15 ft.

Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort. This 40,000 BTU burner box goes with the Heatstar ERXL 10 ft. Tube System, and comes ready for natural gas (NG), and includes a propane (LP) conversion kit. All components are name-brand and non-proprietary. This heater must be vented in accordance with the specifications contained in its manual and with national codes and any state, provincial or local codes which may apply. Warning: Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operation, and maintenance instructions thoroughly before installing or servicing this equipment. For assistance or additional information consult a qualified installer, service agency, or gas supplier.

• For use with the Heatstar ERXL 10 ft. tube system
• Great for warehouses, repair shops, truck terminals, aircraft hangers, loading docks, sporting arenas, and farm buildings
• Sealed burner box control with underside sight glass
• 24-Volt thermostat, and 90 degree elbow or 180 U bend tubes also available
• 10 year warranty (Limited to 2 years in caustic environments, such as car washes)
• CSA Approved