Gas Infrared Heaters
Wherever your next outdoor excursion takes you, the heat of the MH15T can tag along. The heater's compact size makes it easy to move and quick to set up. Just screw the left hand thread attachment onto a 20-lb propane tank and fire it up. Three heat settings give up to 15,000 BTU to keep you warm while setting up a tent or laying a foundation. With a tip-over safety switch, the heater keeps you safe while you keep warm. From the lakeside to the campsite to the worksite, the MH15T provides the heat you need where you need it.
- Single adjustable burner head
- 3 heat settings: 10,000 - 12,500 - 15,000
- Accidental tip-over safety shut-off
- Instant, quiet, radiant heat
- Mounts directly to 20 lb. propane tank
- Match lit ignition - no electricity needed
- Heavy-duty bracket
- Standard POL tank connection
- Approximate 29 hour run time on high with a 20 lb. propane tank
- High grade stainless burning screen
- Outdoor use only
Assembled in Cleveland, Ohio, this radiant 10000 - 30000 BTU Liquid Propane Tank Top heaters are the perfect solution for a variety of outdoor heating applications. This heater is constructed with high quality chrome and stainless-steel components to bring you reliable heat on the go. With its adjustable high-medium-low regulator and soft nose P.O.L., the MH30T is easy to use and quick to set up. Adjustable swivel head design allows you to put heat precisely where you want it. Its higher-grade mesh brings you longer lasting durability, while its standard safety shut-off switch brings you peace of mind.
- 10,000 - 30,000 BTU per hour
- For use with propane gas
- Hi-med-low regulator
- Two tip-over safety shutoff
- Wind resistant screen
- Hi-med-lo regulator
- Cylinder not included
- Operate one or two burners at a time
- Directional, adjustable heads
- Polished chrome reflector
- Outdoor use only
The Mr. Heater High-Intensity Radiant Overhead HS9100SPPLP Propane Power Pile heater directs radiant heat to floor-level objects, which in turn, heat surrounding air to the desired temperature. Personnel and objects at floor level enjoy instant, cost-saving comfort. Ideal for use in drafty or windy areas like a loading dock or mechanic bays where doors are open during winter conditions. At 99.9% efficiency, it transfers almost all of the fuel it burns directly into clean safe radiant heat. It is equipped with a power pile thermocouple ignition with a manually lit pilot, so no electricity is required. This heater also has a safety shut-off on the pilot and burner and ships with a thermostat. Mr. Heater's high-intensity heaters are protected by a 10-year, pro-rated burner assembly warranty and a limited one-year gas control warranty. Consult the user manual for installation instructions and for clearance to combustible guidance.
- Runs on liquid propane
- 100,000 btu
- Great for loading docks, warehouses, factories, farm buildings, repair shops, indoor sports arenas, and entrance ways
- Instant heat with a quiet, clean, odor-free operation
- No direct venting required
- Millivolt power pile control heaters ship with a 24-volt thermostat
- Includes additional orifices to convert to 80,000 btu or 90,000 btu
- Limited 10-year warranty on burner assembly
- Limited 1-year warranty on gas control
- CSA certified
Elevate your commercial heating experience with the Mr. Heater 40 ft., 4 in. Dia Replacement Tube Set. Designed to seamlessly integrate with ERXL Burner Boxes delivering 100,000 to 125,000 BTUs, this Mr. Heater Tube Set ensures a smooth and stress-free installation process. Time is money and we value both. Our tube set is designed for straightforward installation, including everything you need for an efficient setup - tubes, reflectors, hangers, couplers and a vent adapter.
- Replacement tube set for ERXL
- 40 ft. tube set with 4 in. tube diameter
- Compatible with ERXL burner boxes 100,000-125,000 BTU
- Tube set includes, tubes, reflectors, hangers, couplers and vent adapter
- Mounting height range of 10 ft. to 14 ft.
The Mr. Heater High-Intensity Radiant Overhead HS9100SSPLP Liquid Propane Auto Spark Ignition heater directs radiant heat to floor-level objects, which in turn, heat surrounding air to the desired temperature. Personnel and objects at floor level enjoy instant, cost-saving comfort. Ideal for use in drafty or windy areas like a loading dock or mechanic bays where doors are open during winter conditions. At 99.9% efficiency, it transfers almost all of the fuel it burns directly into clean safe radiant heat. It is equipped with an auto-spark ignition system, a safety shut-off on the pilot and burner, and ships with a 120V/24VAC/40VA transfomer. Mr. Heater's high-intensity heaters are protected by a 10-year, pro-rated burner assembly warranty and a limited one-year gas control warranty. Consult the user manual for installation instructions and for clearance to combustible guidance.
- Runs on liquid propane
- 100,000 btu
- Great for loading docks, warehouses, factories, farm buildings, repair shops, indoor sports arenas, and entrance ways
- Instant heat with a quiet, clean, odor-free operation
- No direct venting required
- Built-in automatic spark ignition with a safety burner shutoff, 24-volt ac control with intermittent pilot
- Transformer 120-volt/24-volt shipped loose with heater
- Includes additional orifices to convert to 80,000 btu or 90,000 btu
- Limited 10-year warranty on burner assembly
- Limited 1-year warranty on gas control
- CSA certified
Elevate your commercial heating experience with the Mr. Heater 50 ft., 4 in. Dia Replacement Tube Set. Designed to seamlessly integrate with ERXL Burner Boxes delivering 125,000 to 175,000 BTUs, this Mr. Heater Tube Set ensures a smooth and stress-free installation process. Time is money and we value both. Our tube set is designed for straightforward installation, including everything you need for an efficient setup, tubes, reflectors, hangers, couplers and a vent adapter.
- Replacement tube set for ERXL
- 50 ft. tube set with 4 in. tube diameter
- Tube set includes, tubes, reflectors, hangers, couplers and vent adapter
- Mounting height range of 10 ft. to 14 ft.
The Mr. Heater High-Intensity Radiant Overhead HS9120SPLP Liquid Propane Auto Spark Ignition heater directs radiant heat to floor-level objects, which in turn, heat surrounding air to the desired temperature. Personnel and objects at floor level enjoy instant, cost-saving comfort. Ideal for use in drafty or windy areas like a loading dock or mechanic bays where doors are open during Winter conditions. At 99.9% efficiency, it transfers almost all of the fuel it burns directly into clean safe radiant heat. It is equipped with an auto-spark ignition system, a safety shut-off on the pilot and burner and ships with a 120-Volt /24-Volt AC/40-Volt Amp transfomer. Mr. Heater's high-intensity heaters are protected by a 10-year, pro-rated burner assembly warranty and a limited 1-year gas control warranty. Consult the user manual for installation instructions and for clearance to combustible guidance.
- Runs on liquid propane
- 120,000 BTU
- Great for loading docks, warehouses, factories, farm buildings, repair shops, indoor sports arenas and entrance ways
- Instant heat with a quiet, clean, odor-free operation
- No direct venting required
- Built-in automatic spark ignition with a safety burner shutoff, 24-Volt ac control with intermittent pilot
- Transformer 120-Volt/24-Volt shipped loose with heater
- Includes additional orifices to convert to 100,000 BTU
- Limited 10-year warranty on burner assembly
- Limited 1-year warranty on gas control
- CSA certified
The Mr. Heater High-Intensity Radiant Overhead HS9100SPPNG Natural Gas Power Pile heater directs radiant heat to floor-level objects, which in turn, heat surrounding air to the desired temperature. Personnel and objects at floor level enjoy instant, cost-saving comfort. Ideal for use in drafty or windy areas like a loading dock or mechanic bays where doors are open during winter conditions. At 99.9% efficiency, it transfers almost all of the fuel it burns directly into clean safe radiant heat. It is equipped with a power pile thermocouple ignition with a manually lit pilot, so no electricity is required. This heater also has a safety shut-off on the pilot and burner and ships with a thermostat. Mr. Heater's high-intensity heaters are protected by a 10-year, pro-rated burner assembly warranty and a limited one-year gas control warranty. Consult the user manual for installation instructions and for clearance to combustible guidance.
- Runs on natural gas
- 100,000 btu
- Great for loading docks, warehouses, factories, farm buildings, repair shops, indoor sports arenas, and entrance ways
- Instant heat with a quiet, clean, odor-free operation
- No direct venting required
- Millivolt power pile control heaters ship with a 24-volt thermostat
- Includes additional orifices to convert to 80,000 btu or 90,000 btu
- Limited 10-year warranty on burner assembly
- Limited 1-year warranty on gas control
- CSA certified
Elevate your commercial heating experience with the Mr. Heater 60 ft., 4 in. Dia Replacement Tube Set. Designed to seamlessly integrate with ERXL Burner Boxes delivering 150,000 to 175,000 BTUs, this Mr. Heater Tube Set ensures a smooth and stress-free installation process. Time is money and we value both. Our tube set is designed for straightforward installation, including everything you need for an efficient setup - tubes, reflectors, hangers, couplers and a vent adapter.
- Replacement tube set for ERXL
- 60 ft. tube set with 4 in. tube diameter
- Tube set includes, tubes, reflectors, hangers, couplers and vent adapter
- Mounting height range of 10 ft. to 14 ft.
Elevate your commercial heating experience with the Mr. Heater 30 ft. replacement tube set. Designed to seamlessly integrate with ERXL burner boxes delivering 80,000 BTUs, this Mr. Heater tube set ensures a smooth and stress-free installation process. Time is money and we value both. Our tube set is designed for straightforward installation, including everything you need for an efficient setup-tubes, reflectors, hangers, couplers, vent adapter and 10 ft. turbulator.
- Replacement tube set for ERXL
- 30 ft. tube system
- Tube set includes, tubes, reflectors, hangers, couplers and vent adapter and 10 ft. turbulator
- Mounting height range of 12 ft. to 15 ft.
Elevate your commercial heating experience with the Mr. Heater 10 ft. Replacement Tube Set. Designed to seamlessly integrate with ERXL Burner Boxes delivering 40,000 BTUs, this Mr. Heater Tube Set ensures a smooth and stress-free installation process. Time is money and we value both. Our tube set is designed for straightforward installation, including everything you need for an efficient setup - tubes, reflectors, hangers, couplers, vent adapter and 10 ft. turbulator.
- Replacement tube set for ERXL
- 10 ft. tube system
- Compatible with ERXL burner boxes 40,000 BTU
- Tube set includes, tubes, reflectors, hangers, couplers and vent adapter and 10 ft. turbulator
- Mounting height range of 10 ft. to 14 ft.
Elevate your commercial heating experience with the Mr. Heater 20 ft. replacement tube set. Designed to seamlessly integrate with ERXL Burner Boxes delivering 60,000 to 80,000 BTUs, this Mr. Heater tube set ensures a smooth and stress-free installation process. Time is money and we value both. Our tube set is designed for straightforward installation, including everything you need for an efficient setup, tubes, reflectors, hangers, couplers, vent adapter and 10 ft. turbulator.
- Replacement tube set for ERXL
- 20 ft. tube system
- Tube set includes, tubes, reflectors, hangers, couplers and vent adapter and 10 ft. turbulator
- Mounting height range of 12 ft. to 15 ft.
Elevate your commercial heating experience with the Mr. Heater 30 ft. Replacement Tube Set. Designed to seamlessly integrate with ERXL Burner Boxes delivering 100,000 BTUs, this Mr. Heater Tube Set ensures a smooth and stress-free installation process. Time is money and we value both. Our tube set is designed for straightforward installation, including everything you need for an efficient setup, tubes, reflectors, hangers, couplers, vent adapter and 5 ft. turbulator.
- Replacement tube set for ERXL
- 30 ft. tube system
- Compatible with ERXL burner boxes 100,000 BTU or ER2STG-NG/LP 100,000 BTU
- Tube set includes, tubes, reflectors, hangers, couplers and vent adapter and 5 ft. turbulator
- Mounting height range of 12 ft. to 15 ft.