Williams' Monterey wall heaters is affordable and energy-efficient. This traditional home comfort system delivers both quality performance and low operating costs. Ideal for use in a home, apartment, garage, cabin, four-season porch, basement, office or shop.

• Two-sided heating warms 2 adjacent rooms with 25,000 BTU/hour on each side to heat approximately 1,150 sq. ft.
• High-efficient 70% AFUE with 74% thermal efficiency
• No electricity required - continues working during power outage
• Automatic temperature control, resettable vent-limit safety switch and "matchless" pilot igniter
• Patented, side-relief opening draft hood design reduces flue gas temperature to minimize normal heat loss
• 1 in. side clearance
• Higher gauge steel for quiet operation
• Optional blowers improve air circulation
• High altitude and gas conversion kits available
• Thermostat sold separately

Attractive styling, economical and safe heating comfort with this popular home furnace. Compact, space saving direct-vent heaters feature low cost installation and come equipped with all vent material. Heat only the room you're in while saving fuel costs from not heating unused areas. This furnace's design features a sealed combustion chamber making it great for garage or workshop heating.

• High-efficient 66% AFUE heats approximately 675 sq. ft.
• Sealed combustion makes this a great heater for garage or workshop heating, requires no inside room air
• No electricity required - continues working during power outage
• "Matchless" pilot igniter
• All vent material included
• Automatic temperature and safety controls
• Optional blower improves air circulation
• Vent cap includes built-in bird guard - keeps birds and rodents from entering
• High altitude and gas conversion kits available
• Thermostat sold separately

This direct-vent gravity wall furnace provides steady, reliable comfort for single-room heating applications, delivering the dependable performance of a natural gas wall heater in a compact, space-saving design. Its sealed combustion system draws air from outdoors, and vents exhaust directly outside, allowing the vented natural gas heater to operate safely without using room air and helping maintain cleaner indoor conditions. Because the system requires no electricity, it continues heating during outages and serves as a dependable natural gas room heater for homes, cabins, workshops, and other areas that need consistent warmth. The ceramic-coated combustion chamber and durable, soft-white cabinet support long service life, while the gravity-based airflow provides quiet, even comfort throughout the day. With simple installation and all venting material included, this natural gas space heater offers an efficient, low-maintenance heating solution. Keep a warm, comfortable atmosphere at home with this heater for indoor use.

• This direct vent natural gas model provides steady comfort as a natural gas wall heater for single-room heating
• The sealed combustion chamber uses outside air and functions as a dependable vented natural gas heater
• No electricity is required, enabling the natural gas room heater to continue working through outages or cold weather
• Durable components and quiet operation allow the indoor heater to provide consistent heat in living areas or workshops
• A soft white powder coat finish complements many interiors and suits a range of heaters for indoor use

The Mr. Heater 6,000 BTUs - 18,000 BTU portable cabinet heater is ideal for all outdoor applications. It requires no electricity and is whisper quiet. With clean, odor-free operation, an oxygen depletion sensor (ODS) and accidental tip-over safety shut-off, you'll enjoy years of comfortable, safe heat. Heats up to 450 sqft. and has 3 heat settings - 6,000 BTUs, 12,000 BTUs and 18,000 BTUs. To operate, just connect to a 20 lbs. propane tank using the included hose and regulator, stow the tank in the cabinet behind the burner, then simply push and rotate the knob to pilot and the piezo sparking mechanism will take care of the rest while you enjoy quiet, radiant warmth. Operates up to 72-hours on a 20 lbs. propane tank on low setting and is CSA certified.

• Radiant propane heater with 20 lbs. tank storage cabinet for easy portability
• High-medium-low settings: 18,000 BTUs to 12,000 BTUs to 6,000 BTUs
• Heats up to 450 sq. ft.
• Tip-over safety shut-off switch and low oxygen safety shutoff sensor
• Approximate 72-hour run-time on low setting with a 20 lb. propane tank
• One-button piezo ignition - no electricity required
• Quiet, odorless and clean burning
• Constructed of rugged 0.08 mm steel with heavy-duty lockable casters
• Outdoor use only
• Ideal for: patios, workshops, garages, semi-enclosed indoor and outdoor construction sites and commercial construction environments (proper ventilation required)

Affordable solution for large areas with limited floor space. This unobtrusive furnace requires no above-the-floor space. Natural convection quietly and efficiently circulates warm air. Combustion chamber lifts out for easy servicing.

• 58% AFUE with70% heats approximately 700 sq. ft.
• No electricity required; great for backup heat during a power outage
• Fitted with an automatic floor register grille temperature control
• Resettable vent-limit safety switch and "matchless" pilot igniter
• Long-life and quiet heavy-duty burner controls
• High altitude and gas conversion kits available
• Thermostat sold separately
• Quiet, heavy-duty burner
• Must be vented vertically
• Designed for 24-1/4 in. x 32-3/8 in. floor openings
• 1/2 in. gas connection
• 4 in. vent pipe diameter
• Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty, see installation guide for more details

Enjoy instant warmth with a traditional "fireplace look" vented room heater. This heater is vented through the roof to the outside (venting material not included). This heater delivers maximum efficiency and quiet operation with low fuel consumption. Provides comfort for areas requiring additional heat.

• High-efficient 70% AFUE heats approximately 800 sq. ft.
• No electricity required; great for backup heat during a power outage
• Automatic temperature control, resettable vent-limit safety switch and "matchless" pilot igniter
• Louvered-top design and front grille for improved heat circulation
• Optional heavy-duty blower is available for larger rooms where faster heat circulation is desired
• Factory installed ceramic fiber logs for enhanced fireplace-look and added room appeal
• Contemporary black, powder-coat, scratch-resistant finish to complement any decor
• Optional contemporary black, powder-coat, scratch-resistant finish floorboards to complement any decor.
• High altitude and gas conversion kits available
• Thermostat sold separately

Williams Forsaire direct vent wall heater has a counterflow blower system. This uses outside air and circulates the warm air from the ceiling to the floor to help equalize the temperature throughout the room. This heater is designed to be mounted on an exterior wall and vented horizontally through the wall.

• High-efficient 77% heats approximately 900 sq. ft.
• Standing pilot ignition helps ensure a fast start time
• Combustion products are discharged outdoors through the wall vent, eliminating the expense of a vent
• Soft white, heat resistant contemporary finish complements any decor
• Optional side outlet registers deliver additional heat to adjacent room
• Optional 1 or 2-way diffusing grilles can be used to divert heat to the right, left or in both directions
• Optional vent shield deflector insulated, galvanized steel for exterior surface protection
• Vent cap includes built-in bird guard - keeps birds and rodents from entering
• High altitude and gas conversion kits available
• Thermostat sold separately

Enjoy instant warmth with a traditional enclosed vented room heater. This heater is vented through the roof to the outside. This heater delivers maximum efficiency and quiet operation with low fuel consumption. Provides comfort for areas requiring additional heat. Venting material not included.

• High-efficient 68% heats approximately 600 sq. ft.
• No electricity required, great for backup heat during a power outage
• Automatic temperature control, resettable vent-limit safety switch and matchless pilot igniter
• Louvered-top design and front grille for improved heat circulation
• Optional heavy-duty blower is available for larger rooms where faster heat circulation is desired
• Contemporary black, powder-coat, scratch-resistant finish to complement any decor
• High altitude and gas conversion kits available
• Thermostat sold separately
• Recommended for professional purchase only
• Dimensions: 30 in. W x 16 in. D x 32-7/8 in. H
• Optional blower kit (model 2102) sold separately
• For installation be certified technician
• Recommended for professional purchase only

Enjoy instant warmth with a traditional enclosed vented room heater. This heater is vented through the roof to the outside (venting material not included). This heater delivers maximum efficiency and quiet operation with low fuel consumption. Provides comfort for areas requiring additional heat.

• High-efficient 71% heats approximately 575 sq. ft.
• No electricity required, great for backup heat during a power outage
• Automatic temperature control, resettable vent-limit safety switch and matchless pilot igniter
• Louvered-top design and front grille for improved heat circulation
• Optional heavy-duty blower is available for larger rooms where faster heat circulation is desired
• Contemporary black, powder-coat, scratch-resistant finish to complement any decor
• High altitude and gas conversion kits available
• Thermostat sold separately
• Recommended for professional purchase only
• Recommended for professional purchase only

Enjoy instant warmth with a traditional enclosed vented room heater. This heater is vented through the roof to the outside (venting material not included). This heater delivers maximum efficiency and quiet operation with low fuel consumption. Provides comfort for areas requiring additional heat.

• High-efficient 70% AFUE heats approximately 800 sq. ft.
• No electricity required; great for backup heat during a power outage
• Automatic temperature control, resettable vent-limit safety switch and "matchless" pilot igniter
• Louvered-top design and front grille for improved heat circulation
• Optional heavy-duty blower is available for larger rooms where faster heat circulation is desired
• Contemporary black, powder-coat, scratch-resistant finish to complement any decor
• Optional contemporary black, powder-coat, scratch-resistant finish floorboards to complement any decor
• High altitude and gas conversion kits available
• Thermostat sold separately
• May be converted to natural gas with the purchase of gas conversion kit number 8952 (sold separately)
• Dimensions: 34 in. W x 19-5/8 in. D x 32-7/8 in. H
• Optional blower kit (model 2102) sold separately
• Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty; see installation guide for more details
• Recommended for professional purchase only
• Product must be installed by licensed contractor

Enjoy instant warmth with a traditional "fireplace look" vented room heater. This heater is vented through the roof to the outside (venting material not included). This heater delivers maximum efficiency and quiet operation with low fuel consumption. Provides comfort for areas requiring additional heat. Includes blower.

• High-efficient 68% AFUE heats approximately 600 sq. ft.
• No electricity required; great for backup heat during a power outage
• Automatic temperature control, resettable vent-limit safety switch and "matchless" pilot igniter
• Louvered-top design and front grille for improved heat circulation
• Optional heavy-duty blower is available for larger rooms where faster heat circulation is desired
• Factory installed ceramic fiber logs for enhanced fireplace-look and added room appeal
• Contemporary black, powder-coat, scratch-resistant finish to complement any decor
• Optional floorboard available
• High altitude and gas conversion kits available
• Thermostat sold separately
• May be converted to natural gas with the purchase of gas conversion kit number
• Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty; see installation guide for more details
• Recommended for professional purchase only

This 55,000 BTU counterflow direct-vent furnace delivers powerful, consistent warmth for larger rooms, giving you the performance of a natural gas heater with efficient floor-to-ceiling circulation. The counterflow blower draws warm air from the ceiling and moves it down toward the floor, helping equalize temperatures throughout the space for more balanced comfort. Designed for installation on an exterior wall, the heater discharges all combustion by-products outdoors through a horizontal vent, creating a clean and reliable gas wall heater solution for homes, garages, workshops, or basements. Because the unit requires no electricity, it continues operating during outages and serves as a dependable indoor heater during harsh winter conditions. With a 77% AFUE rating, the furnace supports efficient operation, while the included blower and optional outlet kits expand your ability to direct heat to multiple rooms. A soft-white, powder-coated finish blends easily with most interiors and keeps the heater looking clean through everyday use. Safety features such as intermittent pilot ignition, automatic controls, and a resettable vent-limit switch support confident operation, making this system a practical choice for high-capacity gas heaters for indoor use that deliver long-term comfort and performance.

• This 55,000 BTU model provides strong floor-to-ceiling comfort as a natural gas heater designed for rooms up to 900 sq ft
• The counterflow system draws warm air from the ceiling and recirculates it evenly as a dependable gas wall heater
• It operates without electricity and serves as a reliable indoor heater during power outages
• A built-in blower increases circulation and helps this heater distribute warmth quietly
• A soft-white, heat-resistant finish blends well with many interiors and suits a range of gas heaters for indoor use applications
• Thermostat sold separately

Williams' Forsaire is equipped with a counterflow blower system that receives air at ceiling level, warms it and quietly delivers it at floor level. They may be recessed into the stud space or surface mounted and vented vertically through the ceiling and roof. Ideal for homes, apartments, offices, schools, cabins and many other applications.

• High-efficient 76% AFUE heats approximately 1400 sq. ft.
• Standing pilot ignition helps ensure a fast start time
• Heats up to 3 rooms with optional outlet accessories
• Automatic temperature control, resettable vent-limit safety switch and matchless pilot igniter
• Optional side or rear outlet registers deliver additional heat to the rooms next to or behind the heater
• Optional 1 or 2-way diffusing grilles can be used to divert heat to the right, left or in both directions
• Soft white, heat resistant contemporary finish complements any decor
• High altitude and gas conversion kits available
• Thermostat sold separately
• May be converted to use natural gas with the purchase of gas conversion kit number 7727
• Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty, see installation guide for more details
• Recommended for professional purchase only
• Product must be installed by licensed contractor

Williams is equipped with a counterflow blower system that receives air at ceiling level, warms it and quietly delivers it at floor level. They may be recessed into the stud space or surface mounted and vented vertically through the ceiling and roof. Ideal for homes, apartments, offices, schools, cabins and many other applications.

• High-efficient 76% heats approximately 900 sq. ft.
• Intermittent pilot ignition helps ensure a fast start
• Heats up to 3-rooms with optional outlet accessories
• Automatic temperature control, resettable vent-limit safety switch and matchless pilot igniter
• Optional side or rear outlet registers deliver additional heat to the rooms next to or behind the heater
• Optional 1 or 2-way diffusing grilles can be used to divert heat to the right, left or in both directions
• Soft white, heat resistant contemporary finish complements any decor
• High altitude and gas conversion kits available
• Thermostat sold separately
• Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty
• Recommended for professional purchase only
• Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty; see installation guide for more details
• Recommended for professional purchase only

Enjoy instant warmth with a traditional fireplace look vented room heater. This heater is vented through the roof to the outside (venting material not included). This heater delivers maximum efficiency and quiet operation with low fuel consumption. Provides comfort for areas requiring additional heat. Includes blower.

• High-efficient 68% heats approximately 700 sq. ft.
• No electricity required, great for backup heat during a power outage
• Automatic temperature control, resettable vent-limit safety switch and matchless pilot igniter
• Louvered-top design and glass front for improved heat circulation
• Optional heavy-duty blower is available for larger rooms where faster heat circulation is desired
• Factory installed ceramic fiber logs for enhanced fireplace look and added room appeal
• Contemporary black, powder-coat, Scratch-resistant finish to compliment any decor
• High altitude and gas conversion kits available
• Thermostat sold separately

Williams' Forsaire is equipped with a counterflow blower system that receives air at ceiling level, warms it and quietly delivers it at floor level. They may be recessed into the stud space or surface mounted and vented vertically through the ceiling and roof. Ideal for homes, apartments, offices, schools, cabins and many other applications.

• High-efficient 75% AFUE heats approximately 750 sq. ft.
• Standing pilot ignition helps ensure a fast start time
• Heats up to three rooms with optional outlet accessories
• Automatic temperature control, resettable vent-limit safety switch and "matchless" pilot igniter
• Optional side or rear outlet registers deliver additional heat to the rooms next to or behind the heater
• Optional 1 or 2-way diffusing grilles can be used to divert heat to the right, left or in both directions
• Soft white, heat resistant contemporary finish complements any decor
• High altitude and gas conversion kits available
• Thermostat sold separately

Enjoy instant warmth with a traditional enclosed vented room heater. This heater is vented through the roof to the outside (venting material not included). This heater delivers maximum efficiency and quiet operation with low fuel consumption. Provides comfort for areas requiring additional heat. Includes blower.

• High-efficient 68% AFUE heats approximately 600 sq. ft.
• No electricity required; great for backup heat during a power outage
• Automatic temperature control, resettable vent-limit safety switch and matchless pilot igniter
• Louvered-top design and front grille for improved heat circulation
• Optional heavy-duty blower is available for larger rooms where faster heat circulation is desired
• Contemporary black, powder-coat, scratch-resistant finish to complement any decor
• Optional floorboard available
• High altitude and gas conversion kits available
• Thermostat sold separately
• Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty; see installation guide for more details
• Recommended for professional purchase only

Attractive styling, economical and safe heating comfort with this popular home furnace. Compact, space saving direct-vent heaters feature low-cost installation and come equipped with all vent material. Heat only the room you're in while saving fuel costs from not heating unused areas. This furnace's design features a sealed combustion chamber making it great for garage or workshop heating.

• High-efficient 67% AFUE heats approximately 550 sq. ft.
• Includes high altitude orifices required for converting units for use at elevations over 2000 ft.
• Sealed combustion makes this a great heater for garage or workshop heating, requires no inside room air
• No electricity required continues working during power outage
• "Matchless" pilot igniter
• All vent material included
• Automatic temperature and safety controls
• Optional blower improves air circulation
• Vent cap includes built-in bird guard - keeps birds and rodents from entering
• High altitude and gas conversion kits available
• Thermostat sold separately
• Attractive, soft-white finish

Enjoy instant warmth with a traditional "fireplace look" vented room heater. This heater is vented through the roof to the outside (venting material not included). This heater delivers maximum efficiency and quiet operation with low fuel consumption. Provides comfort for areas requiring additional heat. Includes blower.

• High-efficient 68% AFUE heats approximately 700 sq. ft.
• No electricity required; great for backup heat during a power outage
• Automatic temperature control, resettable vent-limit safety switch and "matchless" pilot igniter
• Louvered-top design and front grille for improved heat circulation
• Factory-installed blower provides faster heat circulation
• Factory installed ceramic fiber logs for enhanced fireplace-look and added room appeal
• Contemporary black, powder-coat, scratch-resistant finish to complement any decor
• Optional contemporary black, powder-coat, scratch-resistant finish floorboards to complement any decor
• High altitude and gas conversion kits available
• Thermostat sold separately

Enjoy instant warmth with a traditional enclosed vented room heater. This heater is vented through the roof to the outside (venting material not included). This heater delivers maximum efficiency and quiet operation with low fuel consumption. Provides comfort for areas requiring additional heat.

• High-efficient 68% heats approximately 700 sq. ft.
• No electricity required, great for backup heat during a power outage
• Automatic temperature control, resettable vent-limit safety switch and matchless pilot igniter
• Louvered-top design and front grille for improved heat circulation
• Optional heavy-duty blower is available for larger rooms where faster heat circulation is desired
• Contemporary black, powder-coat, scratch-resistant finish to complement any decor
• High altitude and gas conversion kits available
• Thermostat sold separately
• Recommended for professional purchase only
• Dimensions: 30 in. W x 16 in. D x 32-7/8 in. H
• Optional blower kit (model 2102) sold separately
• Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty, see installation guide for more details
• Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty, see installation guide for more details
• Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty; see installation guide for more details
• Recommended for professional purchase only

Williams' Forsaire is equipped with a counterflow blower system that receives air at ceiling level, warms it and quietly delivers it at floor level. They may be recessed into the stud space or surface mounted and vented vertically through the ceiling and roof. Ideal for homes, apartments, offices, schools, cabins and many other applications.

• High-efficient 76% AFUE heats approximately 1400 sq. ft.
• Standing pilot ignition helps ensure a fast start time
• Heats up to three rooms with optional outlet accessories
• Automatic temperature control, resettable vent-limit safety switch and "matchless" pilot igniter
• Optional side or rear outlet registers deliver additional heat to the rooms next to or behind the heater
• Optional 1 or 2-way diffusing grilles can be used to divert heat to the right, left or in both directions
• Soft white, heat resistant contemporary finish complements any decor
• High altitude and gas conversion kits available
• Thermostat sold separately
• Soft-white finish
• Must be vented vertically through the roof, additional venting material may be required to complete installation
• ANSI certified

Affordable solution for large areas with limited floor space. This unobtrusive furnace requires no above the floor space. Natural convection quietly and efficiently circulates warm air. Combustion chamber lifts out for easy servicing.

• 58% AFUE with70% heats approximately 850 sq. ft.
• No electricity required; great for backup heat during a power outage
• Fitted with an automatic floor register grille temperature control
• Resettable vent-limit safety switch and "matchless" pilot igniter
• Long-life and quiet heavy-duty burner controls
• High altitude and gas conversion kits available
• Thermostat sold separately
• Must be vented vertically
• Designed for 24-1/4 in. x 42-3/8 in. floor openings
• 4 in. vent pipe diameter
• 1/2 in. gas connection
• Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty, see installation guide for more details
• Recommended for professional purchase only

Williams Forsaire is equipped with a counterflow blower system that receives air at ceiling level, warms it and quietly delivers it at floor level. They may be recessed into the stud space or surface mounted and vented vertically through the ceiling and roof. Ideal for homes, apartments, offices, schools, cabins and many other applications.

• High-efficient 76% AFUE heats approximately 850 sq. ft.
• Standing pilot ignition helps ensure a fast start time
• Heats up to three rooms with optional outlet accessories
• Automatic temperature control, resettable vent-limit safety switch and "matchless" pilot igniter
• Optional side or rear outlet registers deliver additional heat to the rooms next to or behind the heater
• Optional one- or two-way diffusing grilles can be used to divert heat to the right, left or in both directions
• Soft white, heat resistant contemporary finish complements any decor
• High altitude and gas conversion kits available
• Thermostat sold separately

Enjoy instant warmth with a traditional enclosed vented room heater. This heater is vented through the roof to the outside (venting material not included). This heater delivers maximum efficiency and quiet operation with low fuel consumption. Provides comfort for areas requiring additional heat. Includes blower.

• High-efficient 68% AFUE heats approximately 700 sq. ft.
• No electricity required; great for backup heat during a power outage
• Automatic temperature control, resettable vent-limit safety switch and matchless pilot igniter
• Louvered-top design and front grille for improved heat circulation
• Optional heavy-duty blower is available for larger rooms where faster heat circulation is desired
• Contemporary black, powder-coat, scratch-resistant finish to complement any decor
• Optional contemporary black, powder-coat, scratch-resistant finish floorboards to complement any decor
• High altitude and gas conversion kits available
• Thermostat sold separately
• Requires outside ventilation (venting not included)
• Rated for elevations 0 ft. to 2000 ft.
• Dimensions: 30 in. W x 16 in. D x 32-7/8 in. H
• Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty; see installation guide for more details
• Recommended for professional purchase only
• Product must be installed by licensed contractor

Affordable solution for large areas with limited floor space. This unobtrusive furnace requires no above-the-floor space. Natural convection quietly and efficiently circulates warm air. Combustion chamber lifts out for easy servicing.

• 58% AFUE with 70% thermal efficiency heats approximately 850 sq. ft.
• No electricity required; great for backup heat during a power outage
• Fitted with an automatic floor register grille temperature control
• Resettable vent-limit safety switch and matchless pilot igniter
• Long-life and quiet heavy-duty burner controls
• High altitude and gas conversion kits available
• Thermostat sold separately
• Must be vented vertically
• Designed for 24-1/4 in. W x 42-3/8 in. L floor opening
• 1/2 in. gas connection
• 4 in. vent pipe diameter

Williams' Monterey wall heaters is affordable and energy-efficient. This traditional home comfort system delivers both quality performance and low operating costs. Ideal for use in a home, apartment, garage, cabin, four-season porch, basement, office or shop.

• High-efficient 66% AFUE heats approximately 700 sq. ft.
• Includes high altitude orifices required for converting units for use at elevations over 2000 ft.
• No electricity required -continues working during power outage
• Automatic temperature control, resettable vent-limit safety switch and "matchless" pilot igniter
• Patented, side-relief opening draft hood design reduces flue gas temperature to minimize normal heat loss
• 1 in. side clearance
• Higher gauge steel for quiet operation
• High altitude and gas conversion kits available
• Optional blowers improve air circulation
• Optional rear outlet registers deliver additional heat to the room behind the heater
• Thermostat sold separately

Enjoy instant warmth with a traditional enclosed vented room heater. This heater is vented through the roof to the outside (venting material not included). This heater delivers maximum efficiency and quiet operation with low fuel consumption. Provides comfort for areas requiring additional heat.

• High-efficient 68% heats approximately 700 sq. ft.
• No electricity required, great for backup heat during a power outage
• Automatic temperature control, resettable vent-limit safety switch and matchless pilot igniter
• Louvered-top design and front grille for improved heat circulation
• Optional heavy-duty blower is available for larger rooms where faster heat circulation is desired
• Contemporary black, powder-coat, scratch-resistant finish to complement any decor
• High altitude and gas conversion kits available
• Thermostat sold separately
• Recommended for professional purchase only
• Dimensions: 25 in. W x 15-3/8 in. D x 28-7/8 in. H
• Optional blower kit (model 2102) sold separately
• Product must be installed by licensed contractor
• Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty, see installation guide for more details

Williams Forsaire is equipped with a counterflow blower system that receives air at ceiling level, warms it and quietly delivers it at floor level. They may be recessed into the stud space or surface mounted and vented vertically through the ceiling and roof. Ideal for homes, apartments, offices, schools, cabins and many other applications.

• High-efficient 75% AFUE heats approximately 750 sq. ft.
• Intermittent pilot ignition helps ensure a fast start
• Heats up to three rooms with optional outlet accessories
• Automatic temperature control, resettable vent-limit safety switch and "matchless" pilot igniter
• Optional side or rear outlet registers deliver additional heat to the rooms next to or behind the heater
• Optional one- or two-way diffusing grilles can be used to divert heat to the right, left or in both directions
• Soft white, heat resistant contemporary finish complements any decor
• High altitude and gas conversion kits available
• Thermostat sold separately

Enjoy instant warmth with a traditional enclosed vented room heater. This heater is vented through the roof to the outside (venting material not included). This heater delivers maximum efficiency and quiet operation with low fuel consumption. Provides comfort for areas requiring additional heat.

• High-efficient 71% AFUE heats approximately 575 sq. ft.
• No electricity required; great for backup heat during a power outage
• Automatic temperature control, resettable vent-limit safety switch and "matchless" pilot igniter
• Louvered-top design and front grille for improved heat circulation
• Optional heavy-duty blower is available for larger rooms where faster heat circulation is desired
• Contemporary black, powder-coat, scratch-resistant finish to complement any decor
• Optional contemporary black, powder-coat, scratch-resistant finish floorboards to complement any decor
• High altitude and gas conversion kits available
• Thermostat sold separately

Williams is equipped with a counterflow blower system that receives air at ceiling level, warms it and quietly delivers it at floor level. They may be recessed into the stud space or surface mounted and vented vertically through the ceiling and roof. Ideal for homes, apartments, offices, schools, cabins and many other applications.

• High-efficient 77% heats approximately 900 sq. ft.
• Intermittent pilot ignition helps ensure a fast start
• Combustion products are discharged outdoors through the wall vent, eliminating the expense of a vent
• Soft white, heat resistant contemporary finish compliments any decor
• Optional side outlet registers deliver additional heat to adjacent room
• Optional 1 or 2-way diffusing grilles can be used to divert heat to the right, left or in both directions
• Optional vent shield deflector - insulated, galvanized steel for exterior surface protection
• Vent cap includes built-in bird guard keeps birds and rodents from entering
• High altitude and gas conversion kits available
• Thermostat sold separately

Williams Forsaire Direct Vent Wall Heater has a counterflow blower system which uses outside air and circulates the warm air from the ceiling to the floor. This helps equalize the temperature throughout the room. This heater is designed to be mounted on an exterior wall and vented horizontally through the wall.

• High-efficient 75% AFUE heats approximately 775 sq. ft.
• Standing pilot ignition helps ensure a fast start time
• Combustion products are discharged outdoors through the wall vent, eliminating the expense of a vent
• Soft white, heat resistant contemporary finish complements any decor
• Optional side outlet registers deliver additional heat to adjacent room
• Optional one- or two-way diffusing grilles can be used to divert heat to the right, left or in both directions
• Optional vent shield deflector - insulated, galvanized steel for exterior surface protection
• Vent cap includes built-in bird guard - keeps birds and rodents from entering
• High altitude and gas conversion kits available
• Thermostat sold separately

Enjoy instant warmth with a traditional fireplace look vented room heater. This heater is vented through the roof to the outside (venting material not included). This heater delivers maximum efficiency and quiet operation with low fuel consumption. Provides comfort for areas requiring additional heat. Includes blower.

• High-efficient 70% heats approximately 800 sq. ft.
• No electricity required, great for backup heat during a power outage
• Automatic temperature control, resettable vent-limit safety switch and matchless pilot igniter
• Louvered-top design and front grille for improved heat circulation
• Optional heavy-duty blower is available for larger rooms where faster heat circulation is desired
• Factory installed ceramic fiber logs for enhanced fireplace look and added room appeal
• Contemporary black, powder-coat, scratch-resistant finish to compliment any decor
• High altitude and gas conversion kits available
• Thermostat sold separately

Low profile furnace can be installed anywhere. Great for homes, apartments, offices, garages and room additions. Mounts on wall and takes no floor space.

• High-efficient 76% AFUE heats approximately 500 sq. ft.
• Unique wall mount design requires no floor space
• Electronic ignition assures convenient "matchless" pilot lighting
• Small, 4 in. low-profile vent size and small-profile termination cap for flush mounting on the outside of the building
• Programmable timer to easily save money and energy; on/off 7-day timer/clock
• 2-speed circulating fan moves cool air off the floor and circulates it throughout hour home for maximum comfort; great for summertime ventilation
• Sealed combustion safety technology uses no inside air for combustion
• Soft white, heat resistant contemporary finish complements any decor
• Built-in thermostat
• All vent material included small 4 in. vent size
• CSA listed for safety
• Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty, see installation guide for more details
• Professional installation recommended

Enjoy instant warmth with a traditional enclosed vented room heater. This heater is vented through the roof to the outside (venting material not included). This heater delivers maximum efficiency and quiet operation with low fuel consumption. Provides comfort for areas requiring additional heat.

• High-efficient 68% heats approximately 600 sq. ft.
• No electricity required, great for backup heat during a power outage
• Automatic temperature control, resettable vent-limit safety switch and matchless pilot igniter
• Louvered-top design and front grille for improved heat circulation
• Optional heavy-duty blower is available for larger rooms where faster heat circulation is desired
• Contemporary black, powder-coat, scratch-resistant finish to complement any decor
• High altitude and gas conversion kits available
• Thermostat sold separately
• Recommended for professional purchase only
• Dimensions: 25 in. W x 15-3/8 in. D x 28-7/8 in. H
• Optional blower kit (model 2102) sold separately
• Product must be installed by licensed contractor
• Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty, see installation guide for more details
• Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty, see installation guide for more details
• Recommended for professional purchase only

Williams' Monterey wall heaters is affordable and energy-efficient. This traditional home comfort system delivers both quality performance and low operating costs. Ideal for use in a home, apartment, garage, cabin, 4-season porch, basement, office or shop.

• High-efficient 70% AFUE heats approximately 575 sq. ft.
• Includes high altitude orifices required for converting units for use at elevations over 2000 ft.
• No electricity required - continues working during power outage
• Automatic temperature control, resettable vent-limit safety switch and matchless pilot igniter
• Patented, side-relief opening draft hood design reduces flue gas temperature to minimize normal heat loss
• 1 in. side clearance
• Higher gauge steel for quiet operation
• High altitude and gas conversion kits available
• Optional blowers improve air circulation
• Optional rear outlet registers deliver additional heat to the room behind the heater
• Thermostat sold separately

Williams is equipped with a counterflow blower system that receives air at ceiling level, warms it and quietly delivers it at floor level. They may be recessed into the stud space or surface mounted and vented vertically through the ceiling and roof. Ideal for homes, apartments, offices, schools, cabins and many other applications.

• High-efficient 76% heats approximately 900 sq. ft.
• Intermittent pilot ignition helps ensure a fast start
• Heats up to 3-rooms with optional outlet accessories
• Automatic temperature control, resettable vent-limit safety switch and matchless pilot igniter
• Optional side or rear outlet registers deliver additional heat to the rooms next to or behind the heater
• Optional 1 or 2-way diffusing grilles can be used to divert heat to the right, left or in both directions
• Soft white, heat resistant contemporary finish complements any decor
• High altitude and gas conversion kits available
• Thermostat sold separately
• Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty, see installation guide for more details
• Recommended for professional purchase only
• Product must be installed by licensed contractor
• Product must be installed by licensed contractor
• Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty; see installation guide for more details
• Recommended for professional purchase only
• Product must be installed by licensed contractor

Enjoy instant warmth with a traditional "fireplace look" vented room heater. This heater is vented through the roof to the outside (venting material not included). This heater delivers maximum efficiency and quiet operation with low fuel consumption. Provides comfort for areas requiring additional heat.

• High-efficient 68% AFUE heats approximately 700 sq. ft.
• No electricity required; great for backup heat during a power outage
• Automatic temperature control, resettable vent-limit safety switch and matchless pilot igniter
• Louvered-top design and glass front for improved heat circulation
• Optional heavy-duty blower is available for larger rooms where faster heat circulation is desired
• Factory installed ceramic fiber logs for enhanced fireplace-look and added room appeal
• Contemporary black, powder-coat, scratch-resistant finish to complement any decor
• Optional contemporary black, powder-coat, scratch-resistant finish floorboards to complement any decor
• High altitude and gas conversion kits available
• Thermostat sold separately
• Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty; see installation guide for more details

Affordable solution for large areas with limited floor space. This unobtrusive furnace requires no above-the-floor space. Natural convection quietly and efficiently circulates warm air. Combustion chamber lifts out for easy servicing.

• 58% AFUE with 70% thermal efficiency heats approximately 700 sq. ft.
• No electricity required, great for backup heat during a power outage
• Fitted with an automatic floor register grille temperature control
• Resettable vent-limit safety switch and matchless pilot igniter
• Long-life and quiet heavy-duty burner controls
• High altitude and gas conversion kits available
• Thermostat sold separately
• Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty; see installation guide for more details
• Recommended for professional purchase only
• Designed for 24-1/4 in. x 42-3/8 in. floor openings
• 1/2 in. gas connection
• 4 in. vent pipe Dia
• Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty; see installation guide for more details
• Recommended for professional purchase only

Attractive styling, economical and safe heating comfort with this popular home furnace. Compact, space saving direct-vent heaters feature low-cost installation and come equipped with all vent material. Heat only the room you're in while saving fuel costs from not heating unused areas. This furnace's design features a sealed combustion chamber making it great for garage or workshop heating.

• High-efficient 66% heats approximately 675 sq. ft.
• Includes high altitude orifices required for converting units for use at elevations over 2000 ft.
• Sealed combustion makes this a great heater for garage or workshop heating requires no inside room air
• No electricity required continues working during power outage
• Matchless pilot igniter
• All vent material included
• Automatic temperature and safety controls
• Optional blower improves air circulation
• Vent cap includes built-in bird guard - keeps birds and rodents from entering
• High altitude and gas conversion kits available
• Thermostat sold separately

Enjoy instant warmth with a traditional fireplace look vented room heater. This heater is vented through the roof to the outside (venting material not included). This heater delivers maximum efficiency and quiet operation with low fuel consumption. Provides comfort for areas requiring additional heat.

• High-efficient 68% AFUE heats approximately 700 sq. ft.
• No electricity required; great for backup heat during a power outage
• Automatic temperature control, resettable vent-limit safety switch and matchless pilot igniter
• Louvered-top design and glass front for improved heat circulation
• Optional heavy-duty blower is available for larger rooms where faster heat circulation is desired
• Factory installed ceramic fiber logs for enhanced fireplace-look and added room appeal
• Contemporary black, powder-coat, scratch-resistant finish to complement any decor
• Optional contemporary black, powder-coat, scratch-resistant finish floorboards to complement any decor
• High altitude and gas conversion kits available
• Thermostat sold separately
• ANSI certified

This 35,000 BTU top-vent counterflow wall furnace delivers strong, even heat for rooms up to 800 sq. ft., offering dependable comfort as a natural gas wall heater for larger living areas, workshops, cabins, and home additions. Its gravity-flow counterheat design circulates warm air from the ceiling downward, helping the appliance perform smoothly and reliably as a vented natural gas heater during everyday use. A built-in thermostat helps maintain consistent temperatures, and pilot ignition supports quick startup in colder weather. The unit may be recessed into the wall or surface-mounted, giving homeowners installation flexibility when adding an indoor natural gas heater to new or existing spaces. Quiet operation, a slim design, and a clean white finish make it suitable for a wide range of interior styles, while safety controls and automatic shutoff promote dependable long-term performance. With durable construction and efficient heat delivery, this natural gas room heater supports households seeking reliable natural gas heaters for indoor use capable of warming larger rooms with steady, comfortable airflow.

• This top vent counterflow natural gas model heats up to 800 sq ft and works as a dependable natural gas room heater for larger areas
• The gravity design promotes quiet circulation and stable daily output from this vented natural gas heater
• Thermostat control and pilot ignition support consistent performance of the natural gas wall heater across seasons
• Recessed or surface mount installation makes the indoor natural gas heater adaptable to new or existing layouts
• This natural gas heater for indoor use is durable and has built-in safety features to support long-term comfort

Motorized Rear Outlet Register for use when furnace is recessed for Monterey Top-Vent furnaces. Chain operated damper with register flush on rear wall. Adjusts the amount of heat delivered through rear register.

• Adjust the amount of heat from your Monterey furnace
• For use with Williams brand Monterey series furnaces with a recessed installation only
• Motorized for increased airflow
• Manufactured with quality parts

This Monterey natural gas furnace provides an efficient, economical way to heat individual rooms up to 600 square feet, offering reliable comfort as a natural gas wall heater while helping homeowners reduce energy use in spaces that are not occupied. Its gravity-flow design and patented side-relief draft hood promote smoother airflow and support consistent operation as a vented natural gas heater, making it well-suited for bedrooms, offices, workshops, cabins, and home additions where quiet, dependable heat is preferred. Because it requires no electricity, the system continues heating during power outages and remains useful as an indoor heater in cold-weather conditions. The dual-wall configuration can warm two adjacent rooms at once, allowing households to maximize comfort with a compact natural gas room heater that installs recessed or surface-mounted. Automatic temperature control, a resettable vent-limit switch, and matchless ignition contribute to long-term performance, helping this natural gas space heater deliver dependable heat across a wide range of heaters for indoor use applications. Its soft-white finish blends easily into most interiors while offering steady comfort from a durable, low-maintenance gas wall heater.

• This Monterey model delivers steady heat for one or two rooms and works as a dependable natural gas room heater
• The sealed combustion design lets the appliance operate safely as a vented natural gas heater using outdoor air
• Side relief draft hood openings improve airflow and support daily comfort from this natural gas wall heater
• Quiet operation and simple installation make it suitable as an indoor heater in homes or small commercial spaces
• This gas heater for indoor use is durable and has built-in controls to ensure long-term performance

Williams' Monterey wall heaters is affordable and energy efficient. This traditional home comfort system delivers both quality performance and low operating costs. Ideal for use in a home, apartment, garage, cabin, four-season porch, basement, office or shop.

• 2-sided heating warms 2 adjacent rooms with 25,000 BTU/hour on each side to heat approximately 1,150 sq. ft.
• High-efficient 70% AFUE with 74% thermal efficiency
• Includes high altitude orifices required for converting units for use at elevations over 2000 ft.
• No electricity required continues working during power outage
• Automatic temperature control, resettable vent-limit safety switch and "matchless" pilot igniter
• Patented, side-relief opening draft hood design reduces flue gas temperature to minimize normal heat loss
• 1 in. side clearance
• Higher gauge steel for quiet operation
• Optional blowers improve air circulation
• High altitude and gas conversion kits available
• Thermostat sold separately

Enjoy instant warmth with a traditional enclosed vented room heater. This heater is vented through the roof to the outside (venting material not included). This heater delivers maximum efficiency and quiet operation with low fuel consumption. Provides comfort for areas requiring additional heat. Includes blower.

• High-efficient 68% AFUE heats approximately 700 sq. ft.
• No electricity required; great for backup heat during a power outage
• Automatic temperature control, resettable vent-limit safety switch and matchless pilot igniter
• Louvered-top design and front grille for improved heat circulation
• Optional heavy-duty blower is available for larger rooms where faster heat circulation is desired
• Contemporary black, powder-coat, scratch-resistant finish to complement any decor
• Optional contemporary black, powder-coat, scratch-resistant finish floorboards to complement any decor
• High altitude and gas conversion kits available
• Thermostat sold separately
• Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty; see installation guide for more details
• Recommended for professional purchase only

Williams Forsaire is equipped with a counterflow blower system that receives air at ceiling level, warms it and quietly delivers it at floor level. They may be recessed into the stud space or surface mounted and vented vertically through the ceiling and roof. Ideal for homes, apartments, offices, schools, cabins and many other applications.

• High-efficient 76% AFUE heats approximately 850 sq. ft.
• Standing pilot ignition helps ensure a fast start time
• Heats up to three rooms with optional outlet accessories
• Automatic temperature control, resettable vent-limit safety switch and "matchless" pilot igniter
• Optional side or rear outlet registers deliver additional heat to the rooms next to or behind the heater
• Optional one- or two-way diffusing grilles can be used to divert heat to the right, left or in both directions
• Soft white, heat resistant contemporary finish complements any decor
• High altitude and gas conversion kits available
• Thermostat sold separately
• Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty; see installation guide for more details
• Recommended for professional purchase only

Enjoy instant warmth with a traditional enclosed vented room heater. This heater is vented through the roof to the outside (venting material not included). This heater delivers maximum efficiency and quiet operation with low fuel consumption. Provides comfort for areas requiring additional heat.

• High-efficient 68% AFUE heats approximately 600 sq. ft.
• No electricity required; great for backup heat during a power outage
• Automatic temperature control, resettable vent-limit safety switch and "matchless" pilot igniter
• Louvered-top design and front grille for improved heat circulation
• Optional heavy-duty blower is available for larger rooms where faster heat circulation is desired
• Contemporary black, powder-coat, scratch-resistant finish to complement any decor
• Optional contemporary black, powder-coat, scratch-resistant finish floorboards to complement any decor
• High altitude and gas conversion kits available
• Thermostat sold separately
• Product must be installed by licensed contractor

Enjoy instant warmth with a traditional enclosed vented room heater. This heater is vented through the roof to the outside (venting material not included). This heater delivers maximum efficiency and quiet operation with low fuel consumption. Provides comfort for areas requiring additional heat.

• High-efficient 70% AFUE heats approximately 800 sq. ft.
• No electricity required, great for backup heat during a power outage
• Automatic temperature control, resettable vent-limit safety switch and matchless pilot igniter
• Louvered-top design and front grille for improved heat circulation
• Optional heavy-duty blower is available for larger rooms where faster heat circulation is desired
• Contemporary black, powder-coat, scratch-resistant finish to complement any decor
• Optional contemporary black, powder-coat, scratch-resistant finish floorboards to complement any decor
• High altitude and gas conversion kits available
• Thermostat sold separately