Condensate Pumps
The VCMA-15ULS has 1/2 Gal. tank capacity. Little Giant VCMA Series is ideal for collecting, detecting and the automatic removal of condensate from air conditioning equipment, de-humidifiers, high efficiency furnaces, condensing boilers and other equipment where an automatic drain pump is required. Also suitable for high efficiency oil and gas-fired condensing furnace and condensing boiler equipment.
- 1/50 HP high performance motor
- ABS tank, motor cover and volute
- Stainless steel pump shaft
- Snap-action pump switch
- Removable 3/8 in. barbed check valve
- Safety switch included
Avoid excess condensation from your HVAC equipment with Little Giant's VCMA-20ULS condensate pump. Used to move and direct the flow of condensation produced by boilers, furnaces, air conditioning systems and hydroponic systems, the VCMA-20 condensate pump is ideal when gravity drainage is not possible or practical. Its state-of-the-art design features a vertical-type pump unit to fit in tight spaces requiring a smaller footprint.
- 1/30 hp high-performance motor
- ABS tank, motor cover and volute
- Stainless steel motor shaft
- 1/2 Gal. tank capacity
- Safety switch included
7-34B is for use with air conditioning and refrigeration condensate drains, condensate pump discharge lines and humidifier overflow drain lines. This braided tubing is designed to be kink resistant, lightweight and flexible. It will withstand rough handling and heavy usage while maintaining dimensional stability. Made of high quality materials with smooth interior and exterior that prevents sediment accumulation, allows easy flow. The tubing is easy to shape, bend and install.
- Clear Vinyl Chloride (PVC)
- Reinforced polyester caliber 300-500
- Extra rigid design resists crimping and kinking due to durometer value of 78-80 (shore A)
- Service temperature 140degree F. (60degree C.)
- Durometer: Shore 78-80A
Asurity ULTRA Series 120V Condensate Pump, 22 ft Lift. Translucent Tank For Easy & Fast Inspection. 22 ft maximum lift height. LED Indicators Confirm Pump Status. Built-in Safety Overflow Switch. Removable Check Valve for Easy Cleaning. Suitable for condensate up to 160degree F. Vibration dampening feet and motor mounts minimize sound. Mfg #ULTRACP-22
- Translucent Tank For Easy & Fast Inspection
- 22 ft maximum lift height
- LED Indicators Confirm Pump Status
- Built-in Safety Overflow Switch
7-12B is for use with air conditioning and refrigeration condensate drains, condensate pump discharge lines and humidifier overflow drain lines. This braided tubing is designed to be kink resistant, lightweight and flexible. It will withstand rough handling and heavy usage while maintaining dimensional stability. Made of high quality materials with smooth interior and exterior that prevents sediment accumulation, allows easy flow. The tubing is easy to shape, bend and install.
- Clear Vinyl Chloride (PVC)
- Reinforced polyester caliber 300-500
- Extra rigid design resists crimping and kinking due to durometer value of 78-80 (shore A)
- Service temperature 140degree F. (60degree C.)
- Durometer: Shore 78-80A
The VCMA-15UL is ideal for automatic collection and removal of condensate from air conditioning, refrigeration and de-humidification equipment when gravity drainage is not possible or practical. Also suitable for high efficiency oil and gas-fired condensing furnace and condensing boiler equipment. This units includes a 6 ft. cord as well as a .5 Gal. reservoir.
- 1/50 hp high-performance motor pumps 65 Gal. of water per hour
- ABS tank, motor cover and volute
- Stainless steel motor shaft
- 1/2 Gal. collection tank
7-38P is for use with air conditioning and refrigeration condensate drains, condensate pump discharge lines and humidifier overflow drain lines. This braided tubing is designed to be kink resistant, lightweight and flexible. It will withstand rough handling and heavy usage while maintaining dimensional stability. Made of high quality materials with smooth interior and exterior that prevents sediment accumulation, allows easy flow. The tubing is easy to shape, bend and install.
- Clear Vinyl Chloride (PVC)
- Reinforced polyester caliber 300-500
- Extra rigid design resists crimping and kinking due to durometer value of 78-80 (shore A)
- Service temperature 140degree F. (60degree C.)
- Durometer: Shore 78-80A
7-38P is for use with air conditioning and refrigeration condensate drains, condensate pump discharge lines and humidifier overflow drain lines. This braided tubing is designed to be kink resistant, lightweight and flexible. It will withstand rough handling and heavy usage while maintaining dimensional stability. Made of high quality materials with smooth interior and exterior that prevents sediment accumulation, allows easy flow. The tubing is easy to shape, bend and install.
- Clear Vinyl Chloride (PVC)
- Reinforced polyester caliber 300-500
- Extra rigid design resists crimping and kinking due to durometer value of 78-80 (shore A)
- Service temperature 140degree F. (60degree C.)
- Durometer: Shore 78-80A
Asurity ULTRA Series 120V Condensate Pump, 22 ft Lift with Tubing. Translucent Tank For Easy & Fast Inspection. 22 ft maximum lift height. LED Indicators Confirm Pump Status. Built-in Safety Overflow Switch. Reversible deck for more installation options. Removable Check Valve for Easy Cleaning. Suitable for condensate up to 160degree F. Vibration dampening feet and motor mounts minimize sound. 20 ft of tubing included for easy installation. Mfg #ULTRACP-22T
- Translucent Tank For Easy & Fast Inspection
- 22 ft maximum lift height
- LED Indicators Confirm Pump Status
- Built-in Safety Overflow Switch
Asurity ULTRA Series 230V Condensate Pump, 22 ft Lift. Translucent Tank For Easy & Fast Inspection. 22 ft maximum lift height. LED Indicators Confirm Pump Status. Built-in Safety Overflow Switch. Reversible deck for more installation options. Removable Check Valve for Easy Cleaning. Suitable for condensate up to 160degree F. Vibration dampening feet and motor mounts minimize sound. Mfg #ULTRACP-22-230
- Translucent Tank For Easy & Fast Inspection
- 22 ft maximum lift height
- LED Indicators Confirm Pump Status
- Built-in Safety Overflow Switch
No float, no problems. ClearVues iQ Technology and Floatless Sensor make this the most advanced condensate pump ever. ClearVue runs at the minimum speed needed, saving wear on the pump. Its unique self-cleaning feature senses problems and automatically enters a self-cleaning mode using condensate water to fix the issue. The ClearVue pump features a clear bottom tank to easily check the water level.
- ClearVue float less sensor eliminates the problems associated with conventional condensate pumps such as debris fouling, sunken floats, and misalignment, no float, no problem
- ClearVue senses how fast the condensate is entering the tank and adjusts to the lowest effective speed, making it quieter than a regular pump while also keeping the tank clear
- Unique self-cleaning feature senses problems and automatically enters a self-cleaning mode using condensate water to fix the issue
- ClearVue pump features a clear bottom tank to easily check the water level
- ClearVue pump can provide up to 22 ft. of lift if needed and runs at the minimum speed needed, saving wear and tear
- ClearVue includes specially designed rubber feet that dampen vibration and noise making ClearVue quiet and easy to live with
The Condensate Overflow Switch install in air conditioner drain pan to shut off the unit if the condensate level approaches overflow. Installs In The Condensate Drain Pan. Wires Into 24 Vac Circuit To Turn Off A/C Unit If The Condensate Level In The Drain Pan Approaches Overflow. 18 in. Lead Wires.
- Easy to install, inspect and maintain
- Compact design mounts to side of A/C condensate drain pans
- Can be installed activate audible or visual alarm circuitry
- ABS housing and float
Assurity CP Series 120V Low Profile Condensate Pump with 22 ft. Lift
- The Reservoir Holds 1/3 Gallon Of Condensate
- LED indicators confirm pump status
- 22 ft maximum lift height
- Suitable for condensate up to 160degree F
- Removable Reservoir for EA-Eachsy Maintenance and Built-in Safety Overflow Switch
- Vibration dampening feet and motor mounts minimize sound
- Includes removable check valve and reversible deck for more installation options
- 4 inlet holes
- Mfg #CP-22LP
- The Reservoir Holds 1/3 Gallon Of Condensate
- LED indicators confirm pump status
- 22 ft maximum lift height
- Suitable for condensate up to 160degree F
LITTLE GIANT Condensate Pump. Suitable For High-Efficiency, Gas Furnace Condensate. Pump Is Rated At 80 GPH. Shut-Off is 20 ft. Discharge Is 3/8 in. O.D. Barbed. Includes A Secondary Safety Switch. 115-Volt. 6 ft. Power Cord.
- Low profile for limited spaces
- Vertical centrifugal pump design
- Stainless steel motor shaft
- Automatic start stop and high level water detection (overflow detection switch)
For use in evaporative coolers. Ideal as universal replacement pump. For coolers up to 7,000 CFM Universal mounting Blue styrene body, corrosion-proof Thermal overload protection 90 degree barbed elbow with bleed-off port 4 ft. power cord with 3-prong plug Moisture-proof windings 115-Volt, heavy-duty, fan-cooled motor 307 GPH at 1 ft. UL component recognized Mesh debris screen Snap-on hose adapter.
- High quality concentric fan-cooled double coil motor
- Universal mounting configurations
- Low pump down and recovery level
- Optional 90 degree elbow with bleed off port included
A full featured pump suitable for use with condensate from high efficiency condensing furnaces and boilers which produce acidic condensate. It has 22 ft. of lift compared to the typical 20 ft. Features include vibration dampening feet and motor mounts, metal hang tabs, 4-inlet holes, a clear indicator display, a float switch and check valve.
- Elastomeric motor mounting gasket dampens vibration
- Red, yellow, and green indicator lights show the pump status; the green shows the power applied to the pump, yellow shows the pump is running, and red is for high level alarm
- Rubber feet that support the pump help to dampen vibration which reduces noise
- 4-inlet versus 2 or 3 on other pumps provide the greatest installation versatility, inlet holes have a reinforced wall for durability
- Features a removable check valve which allows for hassle free cleaning
- 1/4 in. quick connect terminals provide easy connection to the built-in overflow switch
- 2-terminals are provided allowing the installer flexibility to connect the air handler shut-down
- Switch features SPDT isolated contacts ready for connection to building automation systems
- Pump comes equipped with shatterproof stainless steel hang tabs which have hole-and-slot design for easy mounting
- Tabs are located on convenient 8 in. centers
Featuring super quiet operation, specifically designed for ductless system installations, and including iQ Technology and Floatless Sensor, ClearVue Mini is chock full of innovative features, and priced competitively. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.
- Clear tank feature of ClearVue Mini allows the user to see the activities inside allowing for faster and accurate troubleshooting
- ClearVue mini's floatless sensor eliminates the problems associated with conventional condensate pumps - no float, no problem
- ClearVue mini is compact and fits almost anywhere including inside a line set cover, the ceiling, behind a wall or in some cases inside the wall cassette unit
- ClearVue mini determines how fast condensate is entering the tank and adjusts its speed and lift to match the conditions and keep the tank clear
- Shuts down the compressor in case of a clogged line, preventing damage to equipment or environment
- ClearVue mini is nearly inaudible, the sound rating is significantly less than 20 dB, this quiet operation allows for maximum installation flexibility
A full featured pump suitable for use with condensate from high efficiency condensing furnaces and boilers which produce acidic condensate. It has 22 ft. of lift compared to the typical 20 ft. Features include vibration dampening feet and motor mounts, metal hang tabs, 4 inlet holes, a clear indicator display, a float switch and check valve.
- The elastomeric motor mounting gasket dampens vibration
- Red, yellow, and green indicator lights show the pump status; the green shows the power applied to the pump, yellow shows the pump is running, and red is for high level alarm
- The rubber feet that support the pump help to dampen vibration which reduces noise
- 4 inlet versus 2 or 3 on other pumps provide the greatest installation versatility; inlet holes have a reinforced wall for durability
- Features a removable check valve which allows for hassle free cleaning
- 1/4 in. quick connect terminals provide easy connection to the built-in overflow switch
- 2 terminals are provided allowing the installer flexibility to connect the air handler shut-down
- Switch features SPDT isolated contacts ready for connection to building automation systems
- Pump comes equipped with shatterproof stainless steel hang tabs which have hole-and-slot design for easy mounting
- Tabs are located on convenient 8 in. centers
- DiversiTech 60A Non-Fusible Switch Disconnect
- Rated for 10 HP motors at 240VAC
- The switch is an on off circuit breaker with no pull out head that could be lost or stolen
- Easy-to-remove front cover with no screws or fasteners
- 60A Non-Fusible Switch Disconnect
- MFG# DPB222R
- DiversiTech Ball Valve End 60in Hoses
- Easy-turn valve for added control of refrigerant loss
- An extra abrasion-resistant layer for the tough environments of HVAC/R
- Rated for 800 PSI working pressure to work with high-pressure refrigerants
- MFG# 1935924
- hilmor General Purpose Backpack
- 19 pockets
- Designed to last with a rubber water-resistant bottom that it will hold up to being dragged around
- Stow your meter safety in either of the two padded zipper pockets on the exterior sides of the tote
- Hang your manifold from the bag’s metal loop for easy transport to the jobsite
- Tools pictured not included
- MFG# 1839080
- Asurity Dual Voltage Flood Detector
- Includes both12-Volt DC connections for building automation systems and 24-Volt AC installation allowing integration with all HVAC systems - will shut down the HVAC system if a flood is detected
- Turns off equipment with as few as 1-2 drops of water detection
- Connect multiple switches to expand protection area
- Connects to a 24VAC power supply, the standard power available on most air handler units or 12VDC power, standard power available on most alarm and home automation systems
- Easily check that the Wet Switch is working normally with the push to test & push to reset buttons
- LED indicators confirm system status
- Flexible placement options
- This switch is Plenum rated
- MFG# WS-2DV
- hilmor 9 CFM Dual Stage Vacuum Pump With Oil
- Two durable hoist points make transporting the vacuum pump easier. Compatible with the hilmor HVAC/R Carrying Strap
- A sloped and channeled housing helps drain oil fast
- Quick, Easy Access to a large oil fill port
- Quickly identify oil level and detect oil contamination through a large sight glass
- A blank-off valve isolates the pump from the system for accurate vacuum readings and easy oil change without losing a vacuum
- Gas ballast removes excess moisture extending the life of the oil
- MFG# 1948122
- Asurity PRO Series 230V High Temperature Condensate Pump with 46ft. Lift
- Suitable For Acidic And Non-Acidic Condensate Up To 212 F
- 49 Ft Maximum Lift Height
- Large 1 Gallon Tank Instantly Reduces Temperature Of Boiler And Steam Humidifier Discharge
- Quarter-Turn Removable Check Valve
- Built-In Safety Overflow Switch
- Flow Rate Of Up To 190 Gallons Per Hour
- 2 Inlet Holes
- MFG# PROCP-46-230
- Mastercool Black Series Spark Free 6 CFM Vacuum Pump Single Stage
- Mastercool Black Series Spark Free 6 CFM Vacuum Pump
- 1-Stage for Ultimate Vacuum 80 Microns
- 1/3 Hp Motor 1720 RPM
- T-Fitting 1/4 FL-M X 1/2 ACME-M
- Refined cartridge machining process creates an improved surface finish extending the longevity of the pump life
- Expanded internal oil path creates less friction and ultimately less heat
- US designed and tested
- Easily removable vapor discharge oil fill port
- Large oil level sight glass with max min level indicator
- Easily accessible oil drain valve
- Thermally protected motor with on off rocker switch
- High volume fan provides cool air to motor and pump
- Weight 20.5 Lbs
- Compatible with A3 and A2L Refrigerants
- MFG# 90066-BL-SF
- hilmor 3 in Reversible Magnetic Nut Driver
- High performance socket design drives the fastener from the flats, not the corners, minimizing slippage
- Tapered socket design for improved access in tight spaces
- 1/4-inch magnetic hex shaft, where metal shavings and debris are easily wiped off
- Sockets are forged from 6150 Alloy Steel and hardened above 48 HRC for improved strength and durability making it the ultimate switchbit
- hilmor Reversible Magnetic Nut Drivers meet or exceed ASME B107.110 Standards
- Meets or exceed ASME B107.110
- MFG# 1937882
- hilmor Large Basic Flare for 3/4in to 1-1/8in Tubes
- The cast steel yoke and hardened flaring bar are made to be knocked around
- Steel wing nuts make it easy to hold pipe secure
- A compact design allows it to be used even in cramped spaces
- An extra-long handle provides more leverage and self-centers for a consistent quality flare
- MFG# 1838955
Condensate Trap
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
- hilmor 60in Refrigeration Hoses,
- An extra abrasion-resistant layer for the tough environments of HVAC/R
- Rated for 800 PSI working pressure to work with high-pressure refrigerants
- MFG# 1839153
- Imperial 1/4" Lever Tube Bender
- For 1/4 in. O.D. tubing
- Open-side type which slips over tube at any point
- Makes smooth, tight radius bends up to 180 with minimum effort
- No scoring or flattening of tubing. Calibrated to show angle of bend
- Wide hook grips tubing securely
- MFG# 364-FHA-04
- Asurity ULTRAIQP 120V Condensate Pump with 22 ft. Lift
- Translucent Tank for Easy & Fast Inspection
- Intelligent variable speed operation senses water flow and adjusts motor speed automatically allowing for quiet operation
- Self-cleaning feature detects when a drain line is partially or fully clogged, increasing the pressure in the drain line and pulses to clear the clog
- End-of-season mode. After 30-days of not detecting water, the pump automatically drains water from the tank
- 22 ft. maximum lift height
- Built-in safety overflow switch with alarm and run contacts shuts the system down preventing overflow
- LED and audible indicators confirm pump status
- Removable check valve for easy cleaning
- 4 inlet holes
- MFG# ULTRAIQP
- hilmor 12 CFM A2L Compatible Dual Stage Brushless Vacuum Pump Without Oil
- Brushless DC motor technology
- Two durable hoist points make transporting the vacuum pump easier. Compatible with the hilmor HVAC/R Carrying Strap
- A sloped and channeled housing helps drain oil fast
- Quickly identify oil level and detect oil contamination through a large sight glass
- A blank-off valve isolates the pump from the system for accurate vacuum readings and easy oil change without losing a vacuum
- Gas ballast removes excess moisture extending the life of the oil
- MFG# 1950532
Condensate Pump
- 208v
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
- hilmor Wireless Vacuum Gauge
- Withstands daily transportation and jobsite abuse
- Easy to Read LED backlit screen display
- 80 hour battery life for Remote Sensor and Handheld
- Programmable audible micron alarm with high and low settings
- MFG# 1950217
- Asurity 3/4" Drain Trap Kit with Float Switch and Cross 1" Drop
- Clear Pvc Trap Provides Easy Visibility Of Condensate Flow And Blockages
- Tough, Durable, Schedule 40 Pvc Fittings For Years Of Reliability
- Multiple Cleanouts For Easy Maintenance
- 3/4 In. Cs-1 Float Switch Protects Against Condensate Overflow
- Watertight Caps (2) Allow Easy Access To Clean Drain Traps; Fit Securely For No Leakage
- Includes Cleaning Brush For Easy Removal Of Drain Trap Debris
- MFG# DTK207
- hilmor Reversible Nut Driver 6in 3 pack
- High performance socket design drives the fastener from the flats, not the corners, minimizing slippage
- Tapered socket design for improved access in tight spaces
- 1/4-inch magnetic hex shaft, where metal shavings and debris are easily wiped off
- Sockets are forged from 6150 Alloy Steel and hardened above 48 HRC for improved strength and durability making it the ultimate switchbit
- hilmor Reversible Magnetic Nut Drivers meet or exceed ASME B107.110 Standards
- MFG# 1937883
- Asurity 3/4" Drain Trap Kit with Float Switch (1" Drop)
- Clear PVC trap provides easy visibility of condensate flow and blockages
- Tough, durable, schedule 40 PVC fittings for years of reliability
- Multiple cleanouts for easy maintenance
- 3/4 in. CS-1 Float Switch protects against condensate overflow
- Includes cleaning brush for easy removal of drain trap debris
- MFG# DTK210
- Asurity Condensate Neutralizer Tank - Floor Mount
- Neutralizes Condensate From Natural Gas Or Propane Condensing Boilers And Furnaces
- Neutralizes At Approximate Rate Of 20 Gallons Per Hour (Based On 3,00,000 Btu/Hr 96 Efficiency)
- Prevents Acidic Condensate From Corroding Drains And Sewer Systems
- Includes Two Piping Configurations For Easy Installation
- Polypropylene Construction Is Rugged And Resists Corrosion
- All Materials Are Corrosion Resistant
- MFG# CNT-3M
- Asurity High Temperature 120V Condensate Pump with 22 ft Lift
- 22 feet maximum lift height
- Suitable for condensate up to 190F
- Steam-resistant electronics for high temperature applications
- Rubber isolation feet
- Built-in safety overflow switch
- LED indicators confirm pump status
- 4 inlet holes
- MFG# FP-22
- Asurity 3/4" Drain Trap Kit with Float Switch 3" Drop
- Clear Pvc Trap Provides Easy Visibility Of Condensate Flow And Blockages
- Tough, Durable, Schedule 40 Pvc Fittings For Years Of Reliability
- Multiple Cleanouts For Easy Maintenance
- 3/4 In. Cs-1 Float Switch Protects Against Condensate Overflow
- Includes Cleaning Brush For Easy Removal Of Drain Trap Debris
- MFG# DTK205A
- hilmor Compact Vacuum Gauge
- Easy to Read
- Backlit LCD makes reading in the dark easy.
- Convenient Storage
- Protective case keeps the gauge safe from damage and creates a premium feel
- Programmable audible micron alarm with high and low settings
- MFG# CVG1200
- hilmor 600 Lumen Pivoting Mini Light
- 600 Lumens (1.5 Hrs), 300 Lumens (3 Hrs)
- Magnetic Base for Precise Positioning
- Adjustable Joints for Different Angles
- Rechargable Li-Ion Battery
- MFG# HMMWL600
- Asurity IQP Series 120V Condensate Pump with 22 ft Lift
- Self Cleaning Feature Detects When A Drain Line Is Partially Or Fully Clogged, Increasing The Pressure In The Drain Line To Clear The Clog
- The Floatless Sensor Eliminates Many Of The Mechanical Problems Associated With Conventional Condensate Pumps
- Reversible Deck For More Installation Options
- 22 Ft Maximum Lift Height
- Translucent Tank For Easy And Fast Inspection
- Built-In Safety Overflow Switch With Alarm And Run Contacts Shuts The System Down Preventing Overflow
- Led And Audible Indicators Confirm Pump Status
- Removable Check Valve For Easy Cleaning
- 4 Inlet Holes
- MFG# IQP-120
- hilmor Reverse Bending Attachment for Compact Bending Tool
- Replacement / Add-On Reverse Bending Attachment
- For use with hilmor compact bending tool
- MFG# 1890999
- Asurity 27 x 63 Plastic Drain Pan, 5 Pack
- Vacuum-formed from non-toxic ABS plastic
- Rolled edges for durability, ribbed bottoms for rigidity, and reinforced corners for strength
- Pan holds up to 2 inches of water; comes equipped with 3/4 inch diameter PVC discharge fitting
- The seamless construction features rolled edges on all sides for maximum safety and integrity
- No seams, no rust, and no leakage
- Complies with Southern Building Code
- Outlet on Long Side
- MFG# 6-2763L
- hilmor Deluxe Compact Swage Tool Kit
- Simply select the correct head, place it on the tool and make a quality swage
- The power to swage 2-1/8†tubing and the control to swage 1/4†without splitting the tube
- A compact design allows it to be used even in cramped spaces
- The lever mechanism and release button allow for one-handed swaging without the fatigue
- MFG# 1964041
- hilmor 1/4in Valve Core Removal Tool
- Built-in rare-earth magnet for convenient plunger storage, minimizing lost parts on the job
- 1/4" side flare to easily connect a vacuum gauge
- Vacuum tested to 20 microns and tested to 800 PSI working pressure
- Securely and confidently remove valve cores for unrestricted flow
- MFG# 1947967
- DiversiTech Odor Eliminator Concentrate, 15 fl oz
- Powerful industrial odor control and eliminator for use in HVAC systems, mold remediation projects, fire remediation, basements, crawl spaces, and many other areas
- Especially effective on lined and unlined ductwork, fiberglass insulation, automobile interiors, draperies, furniture and carpeting
- Formulated with readily biodegradable ingredients for safe application in occupied areas
- Eliminate odors from mold, smoke, pets, cooking, spoilage, musty spaces
- Available in concentrate and ready-to-use formulas
- MFG# 433-01