Condensate Pumps
The VCMA-15ULS has 1/2 Gal. tank capacity. Little Giant VCMA Series is ideal for collecting, detecting and the automatic removal of condensate from air conditioning equipment, de-humidifiers, high efficiency furnaces, condensing boilers and other equipment where an automatic drain pump is required. Also suitable for high efficiency oil and gas-fired condensing furnace and condensing boiler equipment.
- 1/50 HP high performance motor
- ABS tank, motor cover and volute
- Stainless steel pump shaft
- Snap-action pump switch
- Removable 3/8 in. barbed check valve
- Safety switch included
Avoid excess condensation from your HVAC equipment with Little Giant's VCMA-20ULS condensate pump. Used to move and direct the flow of condensation produced by boilers, furnaces, air conditioning systems and hydroponic systems, the VCMA-20 condensate pump is ideal when gravity drainage is not possible or practical. Its state-of-the-art design features a vertical-type pump unit to fit in tight spaces requiring a smaller footprint.
- 1/30 hp high-performance motor
- ABS tank, motor cover and volute
- Stainless steel motor shaft
- 1/2 Gal. tank capacity
- Safety switch included
7-34B is for use with air conditioning and refrigeration condensate drains, condensate pump discharge lines and humidifier overflow drain lines. This braided tubing is designed to be kink resistant, lightweight and flexible. It will withstand rough handling and heavy usage while maintaining dimensional stability. Made of high quality materials with smooth interior and exterior that prevents sediment accumulation, allows easy flow. The tubing is easy to shape, bend and install.
- Clear Vinyl Chloride (PVC)
- Reinforced polyester caliber 300-500
- Extra rigid design resists crimping and kinking due to durometer value of 78-80 (shore A)
- Service temperature 140degree F. (60degree C.)
- Durometer: Shore 78-80A
Asurity ULTRA Series 120V Condensate Pump, 22 ft Lift. Translucent Tank For Easy & Fast Inspection. 22 ft maximum lift height. LED Indicators Confirm Pump Status. Built-in Safety Overflow Switch. Removable Check Valve for Easy Cleaning. Suitable for condensate up to 160degree F. Vibration dampening feet and motor mounts minimize sound. Mfg #ULTRACP-22
- Translucent Tank For Easy & Fast Inspection
- 22 ft maximum lift height
- LED Indicators Confirm Pump Status
- Built-in Safety Overflow Switch
7-38P is for use with air conditioning and refrigeration condensate drains, condensate pump discharge lines and humidifier overflow drain lines. This braided tubing is designed to be kink resistant, lightweight and flexible. It will withstand rough handling and heavy usage while maintaining dimensional stability. Made of high quality materials with smooth interior and exterior that prevents sediment accumulation, allows easy flow. The tubing is easy to shape, bend and install.
- Clear Vinyl Chloride (PVC)
- Reinforced polyester caliber 300-500
- Extra rigid design resists crimping and kinking due to durometer value of 78-80 (shore A)
- Service temperature 140degree F. (60degree C.)
- Durometer: Shore 78-80A
The VCMA-15UL is ideal for automatic collection and removal of condensate from air conditioning, refrigeration and de-humidification equipment when gravity drainage is not possible or practical. Also suitable for high efficiency oil and gas-fired condensing furnace and condensing boiler equipment. This units includes a 6 ft. cord as well as a .5 Gal. reservoir.
- 1/50 hp high-performance motor pumps 65 Gal. of water per hour
- ABS tank, motor cover and volute
- Stainless steel motor shaft
- 1/2 Gal. collection tank
Asurity ULTRA Series 230V Condensate Pump, 22 ft Lift. Translucent Tank For Easy & Fast Inspection. 22 ft maximum lift height. LED Indicators Confirm Pump Status. Built-in Safety Overflow Switch. Reversible deck for more installation options. Removable Check Valve for Easy Cleaning. Suitable for condensate up to 160degree F. Vibration dampening feet and motor mounts minimize sound. Mfg #ULTRACP-22-230
- Translucent Tank For Easy & Fast Inspection
- 22 ft maximum lift height
- LED Indicators Confirm Pump Status
- Built-in Safety Overflow Switch
7-38P is for use with air conditioning and refrigeration condensate drains, condensate pump discharge lines and humidifier overflow drain lines. This braided tubing is designed to be kink resistant, lightweight and flexible. It will withstand rough handling and heavy usage while maintaining dimensional stability. Made of high quality materials with smooth interior and exterior that prevents sediment accumulation, allows easy flow. The tubing is easy to shape, bend and install.
- Clear Vinyl Chloride (PVC)
- Reinforced polyester caliber 300-500
- Extra rigid design resists crimping and kinking due to durometer value of 78-80 (shore A)
- Service temperature 140degree F. (60degree C.)
- Durometer: Shore 78-80A
7-12B is for use with air conditioning and refrigeration condensate drains, condensate pump discharge lines and humidifier overflow drain lines. This braided tubing is designed to be kink resistant, lightweight and flexible. It will withstand rough handling and heavy usage while maintaining dimensional stability. Made of high quality materials with smooth interior and exterior that prevents sediment accumulation, allows easy flow. The tubing is easy to shape, bend and install.
- Clear Vinyl Chloride (PVC)
- Reinforced polyester caliber 300-500
- Extra rigid design resists crimping and kinking due to durometer value of 78-80 (shore A)
- Service temperature 140degree F. (60degree C.)
- Durometer: Shore 78-80A
Asurity ULTRA Series 120V Condensate Pump, 22 ft Lift with Tubing. Translucent Tank For Easy & Fast Inspection. 22 ft maximum lift height. LED Indicators Confirm Pump Status. Built-in Safety Overflow Switch. Reversible deck for more installation options. Removable Check Valve for Easy Cleaning. Suitable for condensate up to 160degree F. Vibration dampening feet and motor mounts minimize sound. 20 ft of tubing included for easy installation. Mfg #ULTRACP-22T
- Translucent Tank For Easy & Fast Inspection
- 22 ft maximum lift height
- LED Indicators Confirm Pump Status
- Built-in Safety Overflow Switch
Featuring super quiet operation, specifically designed for ductless system installations, and including iQ Technology and Floatless Sensor, ClearVue Mini is chock full of innovative features, and priced competitively. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.
- Clear tank feature of ClearVue Mini allows the user to see the activities inside allowing for faster and accurate troubleshooting
- ClearVue mini's floatless sensor eliminates the problems associated with conventional condensate pumps - no float, no problem
- ClearVue mini is compact and fits almost anywhere including inside a line set cover, the ceiling, behind a wall or in some cases inside the wall cassette unit
- ClearVue mini determines how fast condensate is entering the tank and adjusts its speed and lift to match the conditions and keep the tank clear
- Shuts down the compressor in case of a clogged line, preventing damage to equipment or environment
- ClearVue mini is nearly inaudible, the sound rating is significantly less than 20 dB, this quiet operation allows for maximum installation flexibility
The Condensate Overflow Switch install in air conditioner drain pan to shut off the unit if the condensate level approaches overflow. Installs In The Condensate Drain Pan. Wires Into 24 Vac Circuit To Turn Off A/C Unit If The Condensate Level In The Drain Pan Approaches Overflow. 18 in. Lead Wires.
- Easy to install, inspect and maintain
- Compact design mounts to side of A/C condensate drain pans
- Can be installed activate audible or visual alarm circuitry
- ABS housing and float
No float, no problems. ClearVues iQ Technology and Floatless Sensor make this the most advanced condensate pump ever. ClearVue runs at the minimum speed needed, saving wear on the pump. Its unique self-cleaning feature senses problems and automatically enters a self-cleaning mode using condensate water to fix the issue. The ClearVue pump features a clear bottom tank to easily check the water level.
- ClearVue float less sensor eliminates the problems associated with conventional condensate pumps such as debris fouling, sunken floats, and misalignment, no float, no problem
- ClearVue senses how fast the condensate is entering the tank and adjusts to the lowest effective speed, making it quieter than a regular pump while also keeping the tank clear
- Unique self-cleaning feature senses problems and automatically enters a self-cleaning mode using condensate water to fix the issue
- ClearVue pump features a clear bottom tank to easily check the water level
- ClearVue pump can provide up to 22 ft. of lift if needed and runs at the minimum speed needed, saving wear and tear
- ClearVue includes specially designed rubber feet that dampen vibration and noise making ClearVue quiet and easy to live with
A full featured pump suitable for use with condensate from high efficiency condensing furnaces and boilers which produce acidic condensate. It has 22 ft. of lift compared to the typical 20 ft. Features include vibration dampening feet and motor mounts, metal hang tabs, 4-inlet holes, a clear indicator display, a float switch and check valve.
- Elastomeric motor mounting gasket dampens vibration
- Red, yellow, and green indicator lights show the pump status; the green shows the power applied to the pump, yellow shows the pump is running, and red is for high level alarm
- Rubber feet that support the pump help to dampen vibration which reduces noise
- 4-inlet versus 2 or 3 on other pumps provide the greatest installation versatility, inlet holes have a reinforced wall for durability
- Features a removable check valve which allows for hassle free cleaning
- 1/4 in. quick connect terminals provide easy connection to the built-in overflow switch
- 2-terminals are provided allowing the installer flexibility to connect the air handler shut-down
- Switch features SPDT isolated contacts ready for connection to building automation systems
- Pump comes equipped with shatterproof stainless steel hang tabs which have hole-and-slot design for easy mounting
- Tabs are located on convenient 8 in. centers
For use in evaporative coolers. Ideal as universal replacement pump. For coolers up to 7,000 CFM Universal mounting Blue styrene body, corrosion-proof Thermal overload protection 90 degree barbed elbow with bleed-off port 4 ft. power cord with 3-prong plug Moisture-proof windings 115-Volt, heavy-duty, fan-cooled motor 307 GPH at 1 ft. UL component recognized Mesh debris screen Snap-on hose adapter.
- High quality concentric fan-cooled double coil motor
- Universal mounting configurations
- Low pump down and recovery level
- Optional 90 degree elbow with bleed off port included
LITTLE GIANT Condensate Pump. Suitable For High-Efficiency, Gas Furnace Condensate. Pump Is Rated At 80 GPH. Shut-Off is 20 ft. Discharge Is 3/8 in. O.D. Barbed. Includes A Secondary Safety Switch. 115-Volt. 6 ft. Power Cord.
- Low profile for limited spaces
- Vertical centrifugal pump design
- Stainless steel motor shaft
- Automatic start stop and high level water detection (overflow detection switch)
Assurity CP Series 120V Low Profile Condensate Pump with 22 ft. Lift
- The Reservoir Holds 1/3 Gallon Of Condensate
- LED indicators confirm pump status
- 22 ft maximum lift height
- Suitable for condensate up to 160degree F
- Removable Reservoir for EA-Eachsy Maintenance and Built-in Safety Overflow Switch
- Vibration dampening feet and motor mounts minimize sound
- Includes removable check valve and reversible deck for more installation options
- 4 inlet holes
- Mfg #CP-22LP
- The Reservoir Holds 1/3 Gallon Of Condensate
- LED indicators confirm pump status
- 22 ft maximum lift height
- Suitable for condensate up to 160degree F
A full featured pump suitable for use with condensate from high efficiency condensing furnaces and boilers which produce acidic condensate. It has 22 ft. of lift compared to the typical 20 ft. Features include vibration dampening feet and motor mounts, metal hang tabs, 4 inlet holes, a clear indicator display, a float switch and check valve.
- The elastomeric motor mounting gasket dampens vibration
- Red, yellow, and green indicator lights show the pump status; the green shows the power applied to the pump, yellow shows the pump is running, and red is for high level alarm
- The rubber feet that support the pump help to dampen vibration which reduces noise
- 4 inlet versus 2 or 3 on other pumps provide the greatest installation versatility; inlet holes have a reinforced wall for durability
- Features a removable check valve which allows for hassle free cleaning
- 1/4 in. quick connect terminals provide easy connection to the built-in overflow switch
- 2 terminals are provided allowing the installer flexibility to connect the air handler shut-down
- Switch features SPDT isolated contacts ready for connection to building automation systems
- Pump comes equipped with shatterproof stainless steel hang tabs which have hole-and-slot design for easy mounting
- Tabs are located on convenient 8 in. centers
Drain Trap
- Blower Exhaust
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
MFG Part# 0390105X06
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
- Asurity Condensate Neutralizer Tank - Vertical Wall Mount
- Wall-mount cartridge designed for vertical installation that neutralizes condensate from natural gas or propane condensing boilers and furnaces
- Neutralizes at approximate rate of 1.6 gallons per hour (based on 400,000 BTU/hr 93% efficiency)
- Prevents acidic condensate from corroding drains and sewer systems
- For vertical wall installation
- All materials are corrosion resistant
- Includes bypass to prevent backflow
- 3/4" FNTP Patent-Pending Inlet and Outlet Connections
- MFG# CNV-4K
- hilmor 5 CFM Dual Stage Vacuum Pump With Oil
- Two Durable Hoist Points Make Transporting The Vacuum Pump Easier. Compatible With The Hilmor Hvac/R Carrying Strap
- A Sloped And Channeled Housing Helps Drain Oil Fast
- Quick, Easy Access To A Large Oil Fill Port
- Quickly Identify Oil Level And Detect Oil Contamination Through A Large Sight Glass
- A Blank-Off Valve Isolates The Pump From The System For Accurate Vacuum Readings And Easy Oil Change Without Losing A Vacuum
- Gas Ballast Removes Excess Moisture Extending The Life Of The Oil
- MFG# 1948121
Condensate Pump
- 208v
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
- Asurity Replacement Neutralizing Media for CNT-3M (30lbs)
- Replacement Neutralizing Media for CNT-3M
- Condensate Neutralizing Media for use with Asurity Condensate Neutralizing Systems
- Neutralizes Acidic Condensate
- Prevents Drain and Pump Corrosion
- MFG# CNM-3M
Schneider 277V Replacement Spring Return Two Position Motor. Actuators - Accessories. Mfg #30-118-T
- Actuators - Accessories
- Pack of 1
- Weight of the product is 0.530 lbs.
- Length of the product is 2.450 in
- Asurity Replacement Neutralizing Media - 35lbs
- Replacement Neutralizing Media for CNH-4K, CNHK-4K and CNV-4K
- Condensate Neutralizing Media for use with Asurity Condensate Neutralizing Systems
- Neutralizes Acidic Condensate
- Prevents Drain and Pump Corrosion
- MFG# CNM-BULK
MFG Part# 328154-701
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
- Asurity PRO Series 230V Condensate Pump with 16 ft Lift
- 16 ft maximum lift height
- Suitable for condensate up to 160 F
- Sturdy metal hang tabs
- Includes removable check valve
- 4 inlet holes
- MFG# PROCP-16-230
MFG Part# TUB11750
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
- Asurity Undermount Mini-Split Condensate Pump
- Ultra Quiet, (21 dBA)
- Removable Reservoir for Easy Maintenance
- Built-In Safety Overflow Switch
- Max Unit Output 54,000 BTU/h, 16 kW
- User configurable flow - can be mounted on the right or left hand side of unit
- Consistent pumping performance operating from 90 to 240 VAC voltage level
- Universal voltage - 115 – 230V 60Hz
- Self-priming
- Compact Size with Diaphragm Technology
- MFG# QUIETMINI-M
Drain Trap
- Hard "J"
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
- DiversiTech 60A Non-Fusible Switch Disconnect
- Rated for 10 HP motors at 240VAC
- The switch is an on off circuit breaker with no pull out head that could be lost or stolen
- Easy-to-remove front cover with no screws or fasteners
- 60A Non-Fusible Switch Disconnect
- MFG# DPB222R
- DiversiTech 5-Piece Swaging Tool Set 1/4, 3/8, 1/2, 5/8, and 3/4 in
- 5-piece Swaging set that is developed for hard & soft copper
- Heat by Friction; Preserves copper’s malleability during the molding process, for a leak-tight fitting
- Maintains the tubing thickness for high pressure refrigerants and is perfect for mini splits and ductless A/C units
- NOT to be used with impact guns or with drills or screwdrivers with hammer or impact mode on. This will result in a swage or flare that does not seal properly
- MFG# S5000
MFG Part# E27104355
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
- hilmor HVAC Storage Tote
- 27 pockets and 18 elastic bands. 14 exterior pockets and 13 interior pockets
- Designed to last with water-resistant bottom and reinforced rivets
- Stow your meter away safely in the padded pocket in the interior of the tote. Use the tape measure clip, key clip and tape holder loop to secure the rest of the items you need
- This tote has room for multiple tools and is tested up to 50lbs. The padded shoulder strap makes carrying more comfortable.
- Tools pictured not included
- MFG# 1839078
Drain Trap
- 5" x 4" x 2"
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
- DiversiTech 5-Piece Flaring Tool Set - 1/4in, 3/8in, 1/2in, 5/8in and 3/4in
- 5-piece Flaring set that is developed for soft copper or aluminum tubing only
- Heat by Friction; Preserves copper’s malleability during the molding process, for a leak-tight fitting
- Maintains the tubing thickness for high pressure refrigerants and is perfect for mini splits and ductless A/C units
- NOT to be used with impact guns or with drills or screwdrivers with hammer or impact mode on. This will result in a swage or flare that does not seal properly
- MFG# F5000
- hilmor Compact Vacuum Gauge
- Easy to Read
- Backlit LCD makes reading in the dark easy.
- Convenient Storage
- Protective case keeps the gauge safe from damage and creates a premium feel
- Programmable audible micron alarm with high and low settings
- MFG# CVG1200
Schneider 24V Replacement Spring Return Two Position Motor. Actuators - Accessories. Mfg #30-158-A
- Actuators - Accessories
- Pack of 1
- Product weight 0.540 LBS.
- 30-158-A
Condensate Pump
- 460v
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Drain Trap
- For Horizontal Furnaces
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
- hilmor Tool Center Storage Bag
- 24 pockets and three zippered pouches
- Stow your meter away safely in either of the two padded pockets on the exterior sides of the tote
- This bag has room for multiple tools and is tested up to 50 lbs. The padded shoulder strap makes carrying more comfortable
- Designed to last with a hard plastic, water-resistant bottom and a padded aluminum carrying handle
- Tools not included
- MFG# 1839079
- hilmor 3 CFM Dual Stage Vacuum Pump
- Two durable hoist points make transporting the vacuum pump easier. Compatible with the hilmor HVAC/R Carrying Strap
- A sloped and channeled housing helps drain oil fast
- Quick, Easy Access to a large oil fill port
- Quickly identify oil level and detect oil contamination through a large sight glass
- A blank-off valve isolates the pump from the system for accurate vacuum readings and easy oil change without losing a vacuum
- Gas ballast removes excess moisture extending the life of the oil
- MFG# 1947970
- Asurity High Temperature 120V Condensate Pump with 22 ft Lift
- 22 feet maximum lift height
- Suitable for condensate up to 190°F
- Steam-resistant electronics for high temperature applications
- Rubber isolation feet
- Built-in safety overflow switch
- LED indicators confirm pump status
- 4 inlet holes
- MFG# FP-22
- Imperial 1/4" Lever Tube Bender
- For 1/4 in. O.D. tubing
- Open-side type which slips over tube at any point
- Makes smooth, tight radius bends up to 180° with minimum effort
- No scoring or flattening of tubing. Calibrated to show angle of bend
- Wide hook grips tubing securely
- MFG# 364-FHA-04
MFG Part# 1171916
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
- Asurity 30 x 60 High Rise Drain Pan Installation Kit
- Allows placement of air handler above the pan lip without the need for separate, cumbersome mounting blocks
- Includes drain pan, CC-1 float switch, 6 EVA anti-vibration pads, and 1 3/4 in PVC male adapter.
- 5 inch riser gives additional height needed to assure proper drain line pitch
- EVA pads increase available drain line pitch, minimize sound and vibration
- Durable, lightweight pan is 80% thicker than a standard drain pan
- Heat and cold resistant, meets structural and temperature requirements for attic installations
- Heavy-duty reinforced construction for long term performance
- MFG# 6-HK3060
- DiversiTech Concentrated Mold Control for HVAC Systems and Air Ducts, 15 fl oz
- EPA Registered for use in occupied spaces
- Use on coils, pans, ductwork, fans and more
- Will not damage or bleach surfaces
- Sanitizes and deodorizes - no need to use multiple products
- MFG# 491-01