Engineered for reliability, The Taco Heat Motor Power Head provides a time proven method for operation of hydronic zone valves. The exclusive heat motor design operates silently, while the twist off head allows for serviceability without disturbing system connections. This power head is 24 VAC powered with an isolated end switch.

• Isolated end switch
• 24 VAC powered
• For Taco series 570 zone valves (570, 571, 572, and 573)
• Allows for service of valve without removing it

This non-potable water expansion tank is designed for use in commercial and residential closed loop hydronic heating system piping to control the thermal expansion of hot water and maintain system pressure below the relief setting of the relief valve. This carbon steel tank is pre-charged at 12 PSI, tank volume is 2.1 gallons and features a durable expansion membrane that prevents contact of the water with the air in the tank. This rugged butyl diaphragm minimizes loss of the air change and ensures long and trouble-free life for the system. This tank is made of carbon steel with epoxy finish, mounts to supply piping, 1/2 inch MNPT system connection and a 0.302-32 inch charging valve connection (standard tire valve) to facilitate on-site charging of the tank to meet system requirements. The maximum working pressure is 75 PSI (5.3 BAR).

• Precharged to 12 psi
• Rugged flexible butyl diaphragm
• Inline and free standing models
• Steel construction

The 005-050RP Cartridge Assembly is used on several models of Taco circulators. This kit takes the place of conventional seal kits and is extremely easy to install. The Cartridge comes with all the hardware needed to extend your Taco Circulator's operating life.

• Repair part
• Includes casing body bolts
• Easy to install
• 3-year warranty

• Replacement Cartridge Assembly For Taco 007 Cast Iron Circulators
• Repair Part
• Select 007 Pump Models
• 005 Pump Model 005-F2-4
• Cast Iron

Character size 1/8"

• Steel dies
• Exclusive thumb grip
• Sharp characters for deep impression
• Wood box holder
• Pkg of 27
• Black
• Sharp engraved characters to ensure deep impression
• Features exclusive thumb grip for convenient handling
• Steel dies for durability and versatility
• Wooden box holder for keeping the letter stamps organized

The DELAVAN 0.65 70B Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type B-nozzles produce a spray that distributes droplets uniformly throughout the complete pattern. The spray pattern becomes progressively hollower at higher flow rates, particularly above 8.00 GPH. Provides smooth ignition and efficient combustion, particularly in larger burners. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified

Aquastat Controllers are immersion type devices for limiting or regulating the temperature of liquids in boilers, storage tanks and other applications where temperature control is required. Direct or well immersion Tradeline models include heat-conductive compound. Circulator Control and High Limit or Low Limit.

• Totally enclosed micro switch snap-acting switches operate on temperature rise to set point
• Visible control point scale and external adjustment screw permit easy setting
• Horizontal or vertical insertion of the sensing element
• Remote bulb model may be used to sense air temperature in ducts and in outside air sensing applications
• Direct or well immersion Tradeline models include heat-conductive compound
• Temperature range maximum ambient-150 degree F
• Operating temperature range 100 degree F to 240 degree F
• Differential temperature (F) 5 degree F to 30 degree F adjusted
• SPDT switching action
• Stop factory-set at 240 degree F (116 degree C); heat-conductive compound

2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.

• Compact construction for easy installation
• Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
• Actuator motor may be replaced without removing the valve body or draining the system
• Electrical connections (in.) screw terminal block
• Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water
• Valve designed for cycling (not constantly powered on) applications
• Quick fit pushbutton powerhead makes it easy to remove for service
• Innovative motor technology offers silent operation, water hammer resist and longer life
• Series 5000 replacement powerhead is backward compatible with series 1000 zone valves
• Easy to install and operate

4- spring Coupler for S & H circulators. Cast iron construction for long service life. Easy cross reference to competing models.

• Cast iron construction
• Couples motor to pump inside bearing assembly housing
• Used on S-25,S-35.H32,H41
• Can used be placed on B & G circulator
• Equals B & G #118705
• Equals B & G #189110
• No balancing required
• No rusting due to construction
• Durable
• Genuine factory replacements

The DELAVAN 1.25 70A Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type A-nozzles are mainly used on burners with a hollow cone air pattern and for through puts up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified

The DELAVAN 0.75 70B Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type B-nozzles produce a spray that distributes droplets uniformly throughout the complete pattern. The spray pattern becomes progressively hollower at higher flow rates, particularly above 8.00 GPH. Provides smooth ignition and efficient combustion, particularly in larger burners. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified

Danfoss -- Wall Mount Operator with Combined Remote Mounted Sensor, Dial and Capillary Tube For Ra2000 Units. Cap Size: 16".

High Capacity Thermostatic Radiator Valves with T104 Actuators provide control of temperature by modulating the flow of hot water or steam through free-standing radiators, convectors and other heating units with high capacity requirements. Continually monitor and adjust room temperature for consistent comfort and relief from under-heating and overheating. Designed with the higher capacity normally required by North American heating systems.

• Controller with combined remote setpoint and sensor mounted on a wall. Setpoint/sensor connect with a capillary tube to an actuator, which mounts on the valve body. For V110 valves
• Valve seat disc, which is made of resilient material (EPDM), ensures tight shutoff on steam or hot water systems
• Nickel-plated bronze casted body with working parts in cartridge insert for ease of service
• All working parts are replaceable while valve remains in service, in-line, under pressure
• Controls include sensor, set point dial and valve actuator; components may be integral or connected by capillary tubes
• Require no electrical connections
• Meet ASHRAE standard 102-1989
• 40 mm collar diameter
• Temperature Range (F) 48 degree F to 79 degree F
• Capillary Length (ft)6 ft. 8 in.

The DELAVAN 0.75 80W Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type W-nozzles are neither truly hollow nor solid. These nozzles frequently can be used in place of either solid or hollow cone nozzles between 0.40 and 8.00 GPH, regardless of the burners air pattern. The lower flow rates tend to be more solid. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified

The Taco LWCO provides reliable protection for all types of boilers, from small residential hot water boilers to large industrial steam boilers. The boiler's minimum safe operating water level is specified by each manufacturer. Should the water level dip below that specified level, heat will accumulate quickly causing significant damage to the boiler and a potential external safety hazard. The Taco LWCO prevents this hazard from occurring. The LWCO can be used as a primary or secondary low water cutoff on steam boilers up to 250 psi, a primary limit control on hot water boilers or to protect pumps from running dry in condensate receiver tank applications. The LWCO can also activate alarm systems or automatic water feeders.

• Patented adjustable probe sensitivity
• External LEDs and simplified wiring for easy installation and testing
• Automatic or manual reset mode
• Standard on-board (NEMA 1) or remote (NEMA 4) probe
• LT models include external test button, adjustable Delay on Break (DOB) and Delay or Make (DOM) features

SuperVent, purges air through a no clog vent assembly, to control dirt and debris and minimize air vent fouling in Hydronic heating systems, while eliminating the need for bleeding. Used in Residential or Commercial closed loop hydronic heating or chilled water systems. Can be cleaned in place.

• Stainless steel concentrator which eliminates gurgling noise
• Bronze body for rigid construction
• No clog vent
• Dirt and debris resistant
• Sweat connections
• 1/2 in. connection size
• Operating temperature range (F)240 degree F maximum
• 22 Cv capacity
• Maximum safe operating pressure 125 psi
• Rugged design stands up to tough conditions and continuous service

The DELAVAN 1.20 80A Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type A-nozzles are mainly used on burners with a hollow cone air pattern and for through puts up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified

The DELAVAN 1.10 70B Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type B-nozzles produce a spray that distributes droplets uniformly throughout the complete pattern. The spray pattern becomes progressively hollower at higher flow rates, particularly above 8.00 GPH. Provides smooth ignition and efficient combustion, particularly in larger burners. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified

The DELAVAN 0.65 70A Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type A-nozzles are mainly used on burners with a hollow cone air pattern and for through puts up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified

Exact Replacement Plastic Impeller for Broan 9910379H. Light-weight design reduces bearing wear and vibration. Celcon plastic construction.

• Broan exact replacement impellers
• Blade: 4-9/16 in. O.D.
• Hole: 0.218 in. I.D.
• Made in China

The DELAVAN 1.10 80A Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type A-nozzles are mainly used on burners with a hollow cone air pattern and for through puts up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified

The Armstrong ball bearing SBA contain an interchangeable module that includes a stainless steel pump shaft and a housing that contains precision crafted front and back end bearings that are permanently lubricated. Safer solution for facility and service personnel. faster on site service and replacement.

• S&H #3 Series Maintenance-free Seal Bearing Assembly without Impeller
• Universal- fits B&G 3 piece circs
• A longer circulator life without maintenance (regular oil lubrication is not required) no more oil pools on floor
• Stainless steel face plate, coupler face guard meets or exceeds OSHA standards
• The standard for 65 years in hydronics
• Repairable, replaceable, environmentally friendly and now maintenance free

The DELAVAN 0.90 70A Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type A-nozzles are mainly used on burners with a hollow cone air pattern and for through puts up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified

The Delavan .60 80A Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type A-nozzles are mainly used on burners with a hollow cone air pattern and for through puts up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion. This boiler replacement part is compatible with an oil-burning appliance.

• Boiler replacement part
• For use with an oil-burning appliance
• Brass body
• Stainless-steel, hollow orifice

Aquastat Controllers are immersion type devices for limiting or regulating the temperature of liquids in boilers, storage tanks and other applications where temperature control is required. Direct or well immersion Tradeline models include heat-conductive compound. Circulator Control and High Limit or Low Limit.

• Totally enclosed micro switch snap-acting switches operate on temperature rise to set point
• Visible control point scale and external adjustment screw permit easy setting
• Horizontal or vertical insertion of the sensing element
• Remote bulb model may be used to sense air temperature in ducts and in outside air sensing applications
• Direct or well immersion Tradeline models include heat-conductive compound
• Temperature range maximum ambient-150 degree F
• Operating temperature range (F)65 degree F to 200 degree F
• Differential temperature (F) 5 degree F to 30 degree F adjusted
• SPDT switching action
• Stop factory-set at 200 degree F (93 degree C)

The DELAVAN 0.65 80B Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type B-nozzles produce a spray that distributes droplets uniformly throughout the complete pattern. The spray pattern becomes progressively hollower at higher flow rates, particularly above 8.00 GPH. Provides smooth ignition and efficient combustion, particularly in larger burners. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified

Cast Iron Construction

• Couples Motor To Pump Inside Bearing Assembly Housing
• Fits B&G Series HV Pumps & Armstrong #H-32

The Taco 1-1/4 in. cast iron Freedom Flanges set includes: (2) flanges, (4) nuts, and (4) mounting bolts. These flanges are designed for use with Taco "00", "00e", "2400", and "100" series hydronic circulators. Easily installed and removed with a common wrench.

• For use in a hydronic heating system
• Compatible with a wide variety of Taco circulators
• 1-1/4 in. Dia connection size
• Unique hex design provides easy-on, easy-off installation with a standard adjustable wrench

The DELAVAN 0.50 70B1 Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type B-nozzles produce a spray that distributes droplets uniformly throughout the complete pattern. The spray pattern becomes progressively hollower at higher flow rates, particularly above 8.00 GPH. Provides smooth ignition and efficient combustion, particularly in larger burners. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified

lead free bronze flanges. makes installation and service easy. provides a strong and water tight connection between pipe and circulator.

• For use with Astro 220 and 225 SSU models
• 1-1/4 in. NPSM x 3/4 in. sweat
• Lead free
• Set contains 2 half unions and gaskets
• Easy to install
• For use with copper pipe
• Water tight connection
• High quality
• Genuine factory replacement
• Complies with California & Vermont lead free laws

The DELAVAN 0.75 70W Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type W-nozzles are neither truly hollow nor solid. These nozzles frequently can be used in place of either solid or hollow cone nozzles between 0.40 and 8.00 GPH, regardless of the burners air pattern. The lower flow rates tend to be more solid. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified

At the forefront of nozzle development, Delavan created its nozzle using bi-metal construction. The Brass body and stainless steel metering parts permit machining to close tolerances for precision and consistently high performance. Brass transmits heat fast from the nozzle face to reduce the possibility of varnish and oil residue buildup. Stainless steel provides that extra durability for metering parts where wear is a factor.

• Boiler replacement part
• For an oil-burning appliance
• Brass body
• Stainless-steel, hollow orifice

The Delavan 1.25 80B Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type B-nozzles produce a spray that distributes droplets fairly uniformly throughout the complete pattern. The spray pattern becomes progressively hollower at higher flow rates, particularly above 8.00 GPH. Provides smooth ignition and efficient combustion, particularly in larger burners. This boiler replacement part is compatible with an oil-burning appliance.

• Boiler replacement part
• For use with an oil-burning appliance
• Brass body
• Stainless-steel, solid orifice

Danfoss -- Wall Mount Operator with Combined Remote Mounted Sensor, Dial and Capillary Tube For Ra2000 Units. Cap Size: 6".

The "T" Style Blue Flame Log Lighter is CSA Certified. The "T" design places the unique mixing chamber in the center of the Log Lighter for connections to the center rear of the firebox. The Log Lighter pipes connect on both the left and right sides of the mixing chamber. The Blue Flame Steel Log Lighter is designed to help ignite wood in a fireplace. Eliminates the need for paper or kindling. This Log Lighter features steel construction for durability and the design of the air/gas mixing chamber makes lighting a wood fire safer than burning raw gas.

• Reduces emissions in the environment by 50% during use
• Shutter attached to the air or gas mixing chamber adjusts the flame from golden radiant to hot blue for a hotter fire
• Ignites even wet firewood
• Increases radiant heat in the room

The DELAVAN 1.00 80A Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type A-nozzles are mainly used on burners with a hollow cone air pattern and for through puts up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified

All the features you trust from the original Isolator Uni-Flange ball valve, plus a 360 degree rotating flange that allows for orientation to any degree necessary for your installation. This forged brass full port ball valve features a blow-out proof stem, adjustable packing glands and a stainless steel snap ring for extra stability during installation. The only way to isolate circulator pumps.

• Conical inlet to minimize turbulence
• Replaces 3-components, eliminates 2-leak paths, saves approximately 20 minutes in labor
• Fits virtually any standard circulator pump
• Available with slotted holes for high velocity pumps
• Prevents electrolysis
• Eliminates galvanic corrosion

The DELAVAN 1.00 80B Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type B-nozzles produce a spray that distributes droplets uniformly throughout the complete pattern. The spray pattern becomes progressively hollower at higher flow rates, particularly above 8.00 GPH. Provides smooth ignition and efficient combustion, particularly in larger burners. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified

The DELAVAN 1.00 70A Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type A-nozzles are mainly used on burners with a hollow cone air pattern and for through puts up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified

Fits Only Ra-2000 Series.

The DELAVAN 0.75 45B1 Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type B-nozzles produce a spray that distributes droplets uniformly throughout the complete pattern. The spray pattern becomes progressively hollower at higher flow rates, particularly above 8.00 GPH. Provides smooth ignition and efficient combustion, particularly in larger burners. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified

The DELAVAN 0.85 70W Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type W-nozzles are neither truly hollow nor solid. These nozzles frequently can be used in place of either solid or hollow cone nozzles between 0.40 and 8.00 GPH, regardless of the burners air pattern. The lower flow rates tend to be more solid. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified

I Series Combi Primary Secondary Heating Kit

• I Series Combi
• Heating Kit
• Primary Secondary
• 807000212

This 1/2 in. lead free anti-siphon hot or cold water vacuum breaker prevents the reverse flow of polluted water from entering into the potable water supply due to back siphonage. It consists of polished chrome plated lead free construction, chemical resistant silicone seat disc, chrome hood, and an atmospheric vent to prevent spilling. It has a full size orifice to assure pipe size capacity and maximum flow. It is ideal for low flow, non-continuous hot or cold water health hazard installations such as on laboratory equipment.

• Lead free construction
• Chrome finish
• Female NPT inlet and outlet
• Hot or cold water
• Designed to prevent the backflow of polluted water from entering into the potable water supply
• Ideal for low flow, non-continuous hot or cold water health hazard installations such as on laboratory equipment
• Maximum pressure is 125 psi

The DELAVAN 1.00 60B1 Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type B-nozzles produce a spray that distributes droplets uniformly throughout the complete pattern. The spray pattern becomes progressively hollower at higher flow rates, particularly above 8.00 GPH. Provides smooth ignition and efficient combustion, particularly in larger burners. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified

The DELAVAN 0.65 80A Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type A-nozzles are mainly used on burners with a hollow cone air pattern and for through puts up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified

The Armstrong SBA contain an interchangeable module that includes a stainless steel pump shaft a housing that contains a precision crafted front and back end bearings that are permanentlty lubricated. Safer solutions for Facility and service personnel. faster onsite service and replacement.

• S&H #2 Series Maintenance-free Seal Bearing Assembly with Impeller
• Universal- fits B&G 3 piece circs
• A longer circulator life without maintenance (regular oil lubrication is not required)no more oil pools on floor
• Stainless steel face plate, coupler face guard meets or exceeds OSHA standards
• The standard for 65 years in hydronics
• Repairable, replaceable, environmentally friendly and now maintenance free

The DELAVAN 1.00 70B Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type B-nozzles produce a spray that distributes droplets uniformly throughout the complete pattern. The spray pattern becomes progressively hollower at higher flow rates, particularly above 8.00 GPH. Provides smooth ignition and efficient combustion, particularly in larger burners. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified