Hvac
Valve core with Teflon seal. Compatible with most refrigerants. Industry standard valve cores.
- Replaces SF1515
- Steel construction
- Use with most refrigerants
- Neoprene seal
T1 Pro non-programmable thermostat for 24 VAC systems, single stage heat and cool systems. Works with Single stage heat pumps without aux heat. Includes mounting system, thermostat and mounting plate.
- Uses the UWP mounting system that's standard across all t series thermostats
- Adaptive intelligent recovery
- Works with 24 VAC systems, gas, oil, electric warm air, hot water coil, gas, oil, electric hydronic, or steam/gravity systems
- Easily upgradable
The T Series programmable thermostat streamlines everything from product selection and installation to customer service and support. Standard footprint and simple interface. Uses the UWP mounting system that's standard across all T Series thermostats.
- 7-day, 5-2, 5-1-1 or non-programmable
- Simple push-button functionality
- Filter change reminders
- Easy upsell to a connected lyric T6 Pro Wi-Fi when your customer is ready for Wi-Fi (C-wire required)
1/8 in. IPS male thread connection. Use screwdriver or coin to operate. 5 years warranty against defect.
- Air vent
- Hot water
- Valve only
- Nickel plated
- Silver
- Specifications
- Safety
- 125 psi
- Fits 1/8 in. threads
- Meets ASME standards
The Master Flow 8 in. x 7 in. Round Reducer is made of galvanized steel. It features hemmed collar edges for enhanced strength and a secure fit. The reducer is used to transition from a 8 in. pipe to a 7 in. pipe in an HVAC system. It is suitable for most HVAC applications.
- Hemmed collar edges for an improved fit and increased strength
- Connects 8 in. pipe to 7 in. pipe in duct run
- Seal seams with code-approved mastic, sealant or duct tape (sold separately)
- Always insulate ductwork for greater system efficiency and comfort (insulation not included)
The GOODMAN concentric vent termination kit is an optional accessory for use with GOODMAN furnaces of 90% AFUE or higher (furnaces requiring PVC vent piping). The kit makes it possible to use the optimal 2-pipe installation for these furnaces while only cutting 1 hole through the wall or roof. Instead of a separate hole for the exhaust pipe and a separate hole for the combustion air intake pipe, this kit merges the 2 pipes into a single concentric vent pipe which passes through the wall or roof. A specially designed rain cap draws combustion air in from 1 direction while directing exhaust in another direction.
- Required vent size: 2 in.
- Diameter of terminating pipe: 3.5 in.
- Required diameter of opening: 4 in.
- Length of termination kit: 33.5 in.
T-437 RADIATOR VALVE 1-1/2 IN
Long Term 100% Condensate Activated Release with No Waste, No Residue. State Of The Art, Water Based, Polymer Formula Is Biodegradable and Computer Room Safe. Description: 6 Oz. Bag.
Eaton offers the most complete line of Definite Purpose (DP) contactors in the industry. Designed for heating, ventilation, air conditioning and refrigeration (HVACR) applications, Eatons DP contactors are designed to handle the most challenging installations. Eatons DP Contactors offer an efficient design with low VA coil ratings and straight-through wiring.
- These ampere and horsepower rated devices from Eatons electrical sector are subjected to stringent quality assurance inspections and testing procedures
- 15-360a contractors ratings
- Single-, 2-, 3- and 4 pole configurations
- Open components and enclosed designs available
MERV 11 Efficiency, 100% Synthetic Media, UL Classified, media laminated to an expanded metal grid, heavy0duty moisture resistant die-cut frame, diagonal front and back retainers
14 SEER, Heat Pump, 2 Ton.;Energy-efficient compressor.;Single speed PSC.;Factory-installed filter drier.;Factory-installed suction line accumulator.;Factory-installed compressor crankcase heater.;Factory-installed high-capacity muffler.
- Energy-efficient compressor
- Single speed PSC
- Factory-installed filter drier
- Factory-installed suction line accumulator
- Factory-installed compressor crankcase heater
- Factory-installed high-capacity muffler
- High and low pressure switches
- AHRI certified; ETL listed
- Heavy-gauge galvanized-steel cabinet
- Top and side maintenance access
- Service ports and controls are accessible while unit is operating
- 24,000 BTU
- 14 SEER
- Liquid line size: 3/8 in.
- Suction line size: 3/4 in.
- Voltage: 208/230-Volt
- Minimum circuit amps: 14.7
- Maximum overcurrent protection: 25 amps
Rochester's FP Series fine dust filter is recognized worldwide as the most proven and reliable high technology air filter on the market. Our mini-pleat V-Bank technology has proven to be cost effective and highly efficient in removing a wide variety of contaminants from the air stream in industrial, medical, office and original equipment applications. The FP's unique mini-pleat V-Bank design incorporates 193 square feet of high efficiency media within a 24"x24"x12" (nominal) rigid frame, significantly more than most other high efficiency filters on the market. The extended media surface creates a very low resistance to air flow. The low pressure drop results in lower energy costs and a longer filter life. The FP's rigid design allows it to withstand many unfavorable conditions especially variable air volume (VAV) systems. The FP's unique, inherently stable filter design distributes air evenly across the filter. It allows for large variations in air flow and pressure drop without affecting filter performance and efficiency. The FP performance is not affected by repeated fan shutdowns or changes in air flow velocities. Its rated at continuous air flow rates of 3000 cfm. The FP is designed to handle nearly all types of unusual circumstances: 100% relative humidity, turbulent air flow, intermittent exposure to water, repeated fan shutdown, desert and marine installations.
- Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty; see installation guide for more details
- Professional installation recommended
Dual-Diameter Tubular Heat Exchanger. Single-Stage Combination Redundant Valve. Hot Surface Igniter With Adaptive Learning Control To Max Igniter Life. BTU Input: 80,000. Downflow.
- Goodman Model # GDS80804BXAA is the exact replacement for Model # GDS80904BXCB
When you need a motor run capacitor that delivers the extended life your customers demand and the value you desire, you know its time to go PRO. Titan PRO Professional Grade Motor Run Capacitors get the job done by outperforming standard motor run capacitors of similar value by 83%! Built to the toughest international compliance standards for AC motor run capacitors
- 60,000 hours operational life
- Built to the toughest international standards for AC motor run capacitors including EIA-456-A and IEC
- 100% electrical testing
- Heavy-edged metalized polypropylene film is used for the dielectric
- Oil filled
- Non PCB oil
- Insulated terminals
- Hertz:50/60
5 years warranty against defect. For Steam and Hot Water Heating Systems. Innovative push-to-connect design makes for quick and easy installation.
- 125 psi
- Solid brass construction
- Renewable seal
- Composition disc, wheel
- Steam-bronze
- 1 in.
- IPS x IPS
- Male x female
- Black handle
- Round handle
The Pro-Pal Ball Drain is a full port forged brass ball valve. It features a hi-flow hose drain, adjustable packing glands, and reversible handle. The exclusive adjustable flow path allows for draining from either side of the ball.
- Replaces 4 components; eliminates 3 leak paths; saves nearly 30 minutes in labor
- Eliminates assemblies needed to isolate and drain any portion of a piped system
- Avoids reduced port alternatives
- Certified to NSF/ANSI 61 & 372
- Reversible handle for added versatility
- Exclusive adjustable flow path allows for draining from either side of the ball
Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details. Professional installation recommended.
- Heavy-duty aluminized-steel tubular heat exchanger
- Stainless-steel secondary heat exchanger
- 2-stage gas valve provides quiet, economical heating
- Durable silicon nitride igniter
Put control at your fingertips with the White-Rodgers 1F86-344 thermostat. You get precision control of Plus/minus 1 and it works with most single-stage heating, cooling and heat pump systems. This non-programmable thermostat is not compatible with electric baseboard heat systems. You do get versatile features like permanent memory backup and backlit LCD display
- Easy-to-read digital display with backlight
- Non-programmable thermostat
- Compatible with single stage heating and cooling systems
- Precision control of plus/minus 1F
- Permanent program retention during power loss
- Have the correct size reamer when you need it
- Kit contains 1 each of #20 through #90 gauging reamers
- Includes a slim plastic carrying case
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
Broan AE80L InVent Series White 80 CFM Ceiling Exhaust Bath Fan with Light ENERGY STAR offers easy, room side installation, with No Attic Access Required. Ceiling mounted ventilation fan features foldable mounting ears and EZDuct connector for easy installation. New duct damper technology provides a tighter seal, resulting in reduced warm and cold air backdrafts. LED lighting lasts up to 25,000 hours. This energy efficient fan operates at 80 CFM and a very quiet 0.8 sones.
- 80 CFM, effective ventilation to remove moisture and reduce the risk of mold or mildew in most full baths
- 0.8 sones for ultra quiet performance, you might not notice it's on
- Bright 3000K energy efficient LED lighting to help illuminate your room
- Retrofit installations can be done entirely from the room-side, no attic access required, this means a faster, easier installation
- EzDuct connector can be installed from the room side, with no attic access required
- TrueSeal Damper technology reduces air leakage up to 50%
- Foldable mounting ears allow for easy installation in both new construction and room-side replacement applications
- UL listed for use over tub or shower when connected to a GFCI-protected branch circuit (ceiling mount only)
- Powerful enough for rooms up to 75 sq. ft.
- Brighter white grilles blend in to match most common ceiling paint
- Corrosion resistant galvanized steel housing stands up to moisture
- Permanently lubricated AC motor engineered for continuous operation
- Comparable to NuTone Model AEN80L
- For any questions regarding product features, installation, or specifications, please call our Technical Services Dept. at 800-637-1453, Monday-Friday, 8:00 am - 7:00 pm EST.
The Master Flow 7 in. x 4 in. Round Reducer is made of galvanized steel. It features hemmed collar edges for enhanced strength and a secure fit. The reducer is used to transition from a 7 in. pipe to a 4 in. pipe in an HVAC system. It is suitable for most HVAC applications.
- Hemmed collar edges for an improved fit and increased strength
- Connects 7 in. pipe to 4 in. pipe in duct run
- Seal seams with code-approved mastic, sealant or duct tape (sold separately)
- Always insulate ductwork for greater system efficiency and comfort (insulation not included)
