2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.

• Compact construction for easy installation
• Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
• Actuator motor may be replaced without removing the valve body or draining the system
• Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water

Honeywell AMX series Direct Connect reduces water heater installation time as the cold and hot port position eliminates the need for typical elbows and tees. New design requires a maximum of just two sweat connections. Requires fewer parts than previous models.

• Designed to be directly installed on water heater hot outlet port
• Offers constant water temperature under changing operating conditions
• Temperature is adjustable using 3/16 allen wrench and if cold water supply is interrupted, flow reduction occurs in seconds
• Features brass/stainless construction and Teflon coated of wear surfaces
• Alternate hot port bypasses hot water directly from the tank to non-mixed temperature applications
• Maximum safe operating pressure 150 psi
• Operating temperature range (F)33 degree F to 80 degree F (cold water inlet); 100 degree F to 212 degree F (hot water inlet)
• Minimum flow rate (GPM) 0.25 GPM; recirculation port: 1/2 in. NPT; alternate hot port: 1/2 in. NPT
• Fluid temperature (F) mixed water supply--100 degree F to 145 degree F
• Capacity 2.3 Cv

2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.

• Compact construction for easy installation
• Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
• Actuator motor may be replaced without removing the valve body or draining the system
• Patent no. 5,988,201
• Light weight
• Proven durability
• Easy to install
• No clog vent
• 360 degree adjustable collar ring for installation flexibility
• Stainless steel concentrator which eliminates gurgling noise

2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. For use in hydronic controls. Press-connect fittings.

• All models may be installed without disassembling the valve
• Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure
• Valve returns to automatic position when power is restored
• Compact construction for easy installation

2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.

• Compact construction for easy installation
• Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
• Actuator motor may be replaced without removing the valve body or draining the system
• Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water

Pressure regulating valve for automatic control of boiler feed water and other pressure reducing applications. Especially constructed for expansion tank mounting. Included in many expansion kits.

• Fast fill feature
• Built in check valve
• Easy dial-set technology allows simple output pressure setting in psi
• Integrated NPT pressure gage port for testing

2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.

• Compact construction for easy installation
• Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
• Actuator motor may be replaced without removing the valve body or draining the system
• Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water

The Honeywell Home Aquastat Relay is designed for use with an HVAC heating system. This immersion-type controller provides high limit protection while switching control of the oil burner and the circulator. Compatible with Honeywell Home models.

• Designed for use with an HVAC heating system
• 120 240 degree F range with 8 degree F fixed differential, low volt/millivolt
• Select models include transformer and accessory terminals for adding a remote low limit controller
• Requires a 24 VAC thermostat with heat anticipator set at 0.2A

2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.

• Compact construction for easy installation
• Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
• Actuator motor may be replaced without removing the valve body or draining the system
• Patent no. 5,988,201
• Light weight
• Proven durability
• Easy to install
• No clog vent
• 360 degree adjustable collar ring for installation flexibility
• Stainless steel concentrator which eliminates gurgling noise

Zone Panel for conventional and heat pump applications. Intuitive Installer setup. Easy-to-follow, digital display uses real language to guide installer through four easy steps.

• Standard checkout procedure
• Robust push terminals
• Common-Sense LEDs
• Clean, professional installation

2-Way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.

• Compact construction for easy installation
• Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
• Actuator motor may be replaced without removing the valve body or draining the system
• Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water

2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.

• Compact construction for easy installation
• Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
• Actuator motor may be replaced without removing the valve body or draining the system
• Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water

AM-1 series adjusts, maintains, and limits the hot water temperature settings to provide comfort and protect equipment at home. Designed to prevent scalding water and legionella bacteria growth by storing water at 140 degree F and higher. Delivers safe and comfortable water temperatures out of the faucet at 120 degree F.

• Offers constant water temperature under changing operating conditions
• Temperature is limited at any point and if cold water supply is interrupted, flow reduction occurs in seconds
• Designed for easy maintenance and Teflon coating prevents mineral build-up and extends life
• Provides reliable performance at minimum flow of 05 GPM and proportional valve for simultaneous control of hot and cold
• Features dual purpose mixing or diverting values
• Lead free products have products numbers end in LF
• Available temperature gauge adapter in lead-free brass material with EPDM O-ring
• Maximum safe operating pressure (psi)150 psi
• Minimum flow rate (GPM) 0.5 GPM
• Includes check valves on hot and cold ports

Aquastat Controllers are immersion type devices for limiting or regulating the temperature of liquids in boilers, storage tanks and other applications where temperature control is required. Direct or well immersion Tradeline models include heat-conductive compound. Circulator Control and High Limit or Low Limit.

• Totally enclosed micro switch snap-acting switches operate on temperature rise to set point
• Visible control point scale and external adjustment screw permit easy setting
• Horizontal or vertical insertion of the sensing element
• Remote bulb model may be used to sense air temperature in ducts and in outside air sensing applications
• Direct or well immersion Tradeline models include heat-conductive compound
• Temperature range maximum ambient-150 degree F
• Operating temperature range 100 degree F to 240 degree F
• Differential temperature (F) 5 degree F to 30 degree F adjusted
• SPDT switching action
• Stop factory-set at 240 degree F (116 degree C); heat-conductive compound

2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.

• Compact construction for easy installation
• Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
• Actuator motor may be replaced without removing the valve body or draining the system
• Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water

Honeywell Home's 802360JA/U is a 24-Volt replacement motor for V8043/44 zone valve. It is the ideal choice for contractors because of its easy installation. When it comes to top quality, Honeywell Home's zone valves can be trusted.

• Valve includes motor mounting screw and lead connectors
• Used with V8043A, V8043E, and V8043F
• Frequency-50 Hz, 60 Hz
• 24-Volt electrical connections
• Electrical connections - 6 in. leads; 152 mm leads

Zone Panel for conventional and heat pump applications. Intuitive Installer setup. Easy-to-follow, digital display uses real language to guide installer through four easy steps.

• Standard checkout procedure
• Robust push terminals
• Common-Sense LEDs
• Clean, professional installation

2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. For use in hydronic controls. Press-connect fittings.

• All models may be installed without disassembling the valve
• Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure
• Valve returns to automatic position when power is restored
• Compact construction for easy installation

2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.

• Compact construction for easy installation
• Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
• Actuator motor may be replaced without removing the valve body or draining the system
• Electrical connections (in.) screw terminal block
• Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water
• Valve designed for cycling (not constantly powered on) applications
• Quick fit pushbutton powerhead makes it easy to remove for service
• Innovative motor technology offers silent operation, water hammer resist and longer life
• Series 5000 replacement powerhead is backward compatible with series 1000 zone valves
• Easy to install and operate

2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.

• Compact construction for easy installation
• Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
• Actuator motor may be replaced without removing the valve body or draining the system
• Patent no. 5,988,201
• Light weight
• Proven durability
• Easy to install
• No clog vent
• 360 degree adjustable collar ring for installation flexibility
• Stainless steel concentrator which eliminates gurgling noise

2-Way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.

• Compact construction for easy installation
• Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
• Actuator motor may be replaced without removing the valve body or draining the system
• Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water

Provide precise and accurate control of room temperature. Control temperature by modulating the flow of hot water or steam through free-standing radiators, convectors and other heating units with high capacity requirements. Continually monitor and adjust room temperature for consistent comfort.

• Designed with the higher capacity normally required by North American heating systems
• Valve seat disc, which is made of resilient material (EPDM)
• Nickel-plated bronze casted body with working parts in cartridge insert for ease of service
• All working parts are replaceable while valve remains in service, in-line, under pressure
• Valves normally open without control mounted
• Valves may be used with V110 valves
• Ensures tight shutoff on steam or hot water systems
• Meet ASHRAE standard 102-1989
• Includes sensor, set point dial and valve actuator
• Components may be integral or connected by capillary tubes

High Capacity Thermostatic Radiator Valves with T104 Actuators provide control of temperature by modulating the flow of hot water or steam through free-standing radiators, convectors and other heating units with high capacity requirements. Continually monitor and adjust room temperature for consistent comfort and relief from under-heating and overheating. Designed with the higher capacity normally required by North American heating systems.

• Controller with combined remote setpoint and sensor mounted on a wall. Setpoint/sensor connect with a capillary tube to an actuator, which mounts on the valve body. For V110 valves
• Valve seat disc, which is made of resilient material (EPDM), ensures tight shutoff on steam or hot water systems
• Nickel-plated bronze casted body with working parts in cartridge insert for ease of service
• All working parts are replaceable while valve remains in service, in-line, under pressure
• Controls include sensor, set point dial and valve actuator; components may be integral or connected by capillary tubes
• Require no electrical connections
• Meet ASHRAE standard 102-1989
• 40 mm collar diameter
• Temperature Range (F) 48 degree F to 79 degree F
• Capillary Length (ft)6 ft. 8 in.

2-Way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.

• Compact construction for easy installation
• Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
• Actuator motor may be replaced without removing the valve body or draining the system
• Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water