K-Rain's pressure compensating bubblers release water at a slower rate than conventional sprays. Perfect for controlled, gentle irrigation of trees, flowers and shrub areas.

• Fixed 1.0 GPM flow rate - allow water to be absorbed slowly
• Reduces runoff
• Maintains even flow

The K-Rain pressure compensating adjustable tree bubbler is ideal for tree and large shrub watering. Bubblers are small irrigation heads designed to bubble over and flood the ground surface around the tree or shrub. Pressure compensation ensures consistent flow rates over lower pressure ranges.

• Umbrella pattern
• Adjust flow and radius by turning outer cap
• Emits constant water to plants' root systems
• Prevents erosion and runoff
• Easy to install
• application: non-turf areas
• Operating pressure: 20 - 50 psi
• Inlet: 1/2 in. female thread
• Spacing: 1 ft. 3 ft.
• Flow rate: 1.36 - 5.9 GPM

• Drip Irrigation uses up to 50% less water than conventional waterin methods and applies water at a slower rate to ensure even soil penetration
• Properly installed, a dripline system eliminates run-off and overspray common with conventional sprinklers and is an excellent irrigation alternative for non-turf areas such as shrub beds, parking lot medians and ground cover areas
• The durable poly tubing is manufactured with high quality resins which offers stress-cracking resistance, burst strength and flexibility
• The check valve feature prevents water from draining a lower elevations along the line and protects each drip emitter from siphoning sediment, small particles and debris at the end of each irrigation cycle

4 station expansion module for the K-Rain PRO EX 2.0 Irrigation Controller. Increase your Pro EX 2.0 Modular Irrigation Controller from 4 to 16 stations while controller is in operation. Each expansion module increases the capability of the controller by 4 stations.

• Expands PRO EX 2.0 irrigation controller
• Expands by 4 stations
• Easy to install
• Flexible design
• Durable plastic
• Durable wires
• Increases controller station capability
• Power input: 110-Volt AC, 50/60Hz, 240-Volt AC, 50/60Hz
• Power output: 24-Volt AC 1.25 Amp
• Station run times: 1 second to 6 hours for all stations

The 3 in. Pro-S Pop-Up Spray Body with flush cap, (nozzle not included), a rugged, contractor friendly spray line. Molded in High-Impact ABS, the durable Pro-S Series Spray is a low-flush model, making it ideal for low-flow, low pressure situations. The Pro-S Spray is designed to be compatible with all standard female threaded nozzles and is a direct replacement for Rain Bird 1800 series sprays. The Pro-S Riser assembly drops right in an existing Rain Bird 1800 series can. The purple cap indicates that reclaimed water is being used.

• Pro-S 3 in. pop-up sprinkler accepts female thread nozzles for optimum watering (nozzle not included)
• 707 sq. ft. of coverage allows for water dispersal over a large area of grass
• Robust construction ensures longer operation
• Co-molded wiper seal ensures a leak free, full pop-up operation even under low-pressure situations
• 1/2 in. inlet
• 3 in. pop-up height
• Heavy duty retraction spring ensures positive retraction in all soil conditions
• Ratcheting riser permits quick, easy alignment of spray pattern
• Pre-installed flush cap
• Purple cap indicates reclaimed water is being used

K-Rain in reliable 3/4 in. valve offers a straight-through flow pattern allows debris to move through and the turbulent water flow cleans the diaphragm filter screen. This provides long life in applications using well or lake water. It has both an internal bleed and external bleed screw in addition to optional flow control.

• Heavy duty, corrosion and UV resistant PVC construction
• Allows for a straight flow path of water, increasing the flow rate while reducing friction loss
• Offers flexibility for use in potable or non-potable applications
• Provides for manual operation in system start up
• For residential applications
• Permits manual operation without discharging water outside valve
• No flow control
• Remove the solenoid without losing the internal plunger
• Screen is in flow path of water for self-cleaning action during operation
• Your choice of tools to open valve - nut driver, Phillipss head screwdriver or a slotted head screwdriver

K-Rain's pressure compensating bubblers release water at a slower rate than conventional sprays. Perfect for controlled, gentle irrigation of trees, flowers and shrub areas.

The Pro Series 150 Valve is ideal for residential and light commercial applications. This 1 in. model features a removable external bleed screw and metering pin to simplify cleaning and maintenance. With the External Bleed Screw, manual operation during start up is easy.

• Heavy duty, corrosion and UV resistant PVC construction - increases the life of the valve
• Flow range: 0.25 GPM to 35 GPM
• Manual external bleed screw - provides for manual operation in system start up
• Manual internal bleed through solenoid - provides for manual operation without discharging water outside the valve
• Captured plunger - allows for the solenoid to be removed without losing the internal plunger
• Captured plunger - remove the solenoid without losing the internal plunger
• Self cleaning screen - screen is in turbulent flow of water for self-cleaning action during operation
• External bleed screw with removable metering pin allows for easy cleaning of the metering pin without disassembling the valve
• Removable Inlet Cap - Allows for easy conversion from globe to angle-style valve
• 5-year limited warranty

SuperPro with Intelligent Flow Technology allows distance and water flow to be reduced simultaneously and proportionately. Patented Flow Control allows the reduction of distance while reducing the flow rate 50%. Water savings of up to 30% is achievable with this patented feature. SuperPro delivers matched precipitation, eliminates dry spots and provides better zone performance. Water flow can be turned off during nozzle installation or adjustment, with the riser remaining in popped-up position. Shrub Head Model.

• Revolutionary patented easy arc set - simplified arc set allows for wet or dry adjustment in seconds
• 2-in- 1 adjustable or continuous rotation - provides a full range of adjustment from 40 degree to continuous 360 degree
• Patented arc set degree markings - clearly indicates current watering pattern, simplifies arc set adjustment
• Arc memory clutch - prevents internal gear damage and returns rotor to its prior setting automatically if nozzle turret is forced out of adjustment
• Time proven patented reversing mechanism - assures continuous reverse and return, over a 35-year history
• Ratcheting riser - allows for easy adjustment of your left starting position with a simple turn of the riser
• Rubber cover - seals out dirt and increases product durability
• Shrub head model
• Rugged stainless steel spring - 0.093-Gauge 302 stainless steel spring extends the life of the rotor
• 5-year limited warranty

K-Rain's FN Series Fixed Pattern Female Nozzles deliver superior matched precipitation for the most popular arc settings. Carefully designed to provide superior coverage while minimizing wind drift. Our nozzles feature patterns with precise edges.

• Fixed full circle pattern - 15 ft. spray nozzle
• Color coded - allows for easy identifications
• Extra long filters provide longer time between cleanings
• Matched precipitation - allows for even water distribution
• Adjustable stainless steel screw reduces the radius by up to 25%
• 4 distances plus 8 fixed patterns
• Available in 8 ft., 10 ft., 12 ft. and 15 ft. with quarter, half, 3 quarter and full circle
• Perfect addition to K-Rain's durable pro S or RPS spray lines
• Female threaded nozzles fit any other male threaded spray body on the market
• FN series nozzles are the perfect solution for all standard spray applications

The MINIPRO sprinkler is perfect for irrigating small lawn and landscape areas and saves water and money when used to replace spray heads. When considering the industry leading MINIPRO sprinkler, think water efficiency. Now available in 3 popular heights and compatible with a wide selection of nozzles, the MINIPRO brings flexibility to sprinkler system design.

• 6 in. pop-up height
• Revolutionary patented easy arc-set simplified arc set allows for wet or dry adjustment in seconds
• 1/2 in. inlet-replaces all standard mini rotors and pop-up sprays
• Adjustable to 360 degree - provides a full range of adjustment from 40 degree to 360 degree
• Patented arc set degree markings clearly indicates the current watering pattern and simplifies arc set adjustment
• Time proven patented reversing mechanism assures continuous reverse and return
• Ratcheting riser allows for easy adjustment of your left starting position with a simple turn of the riser
• Rubber cover seals out dirt and increases product durability
• Wide selection of nozzles provides flexibility in system design
• 5-year limited warranty

This reliable valve offers a straight through flow pattern that dramatically reduces pressure loss and reduces the risk of trapped debris. It has both an internal bleed and external bleed in addition to optional flow control. Heavy duty, corrosion and UV resistant PVC construction increases the life of the valve. Combination 1 in. and 1-1/4 in. provides the option to increase the pipe size to the valve increasing the flow rate. Tilt diaphragm-piston assembly allows for a straight flow path of the water increasing the flow rate while reducing the friction loss. Debris tolerant design provides flexibility for use in potable or dirty water applications.

• Heavy duty, corrosion and UV resistant PVC construction
• Allows for a straight flow path of water, increasing the flow rate while reducing friction loss
• Offers flexibility for use in potable or non-potable applications
• Provides for manual operation in system start up
• For residential applications
• Permits manual operation without discharging water outside valve
• No flow control
• Remove the solenoid without losing the internal plunger
• Screen is in flow path of water for self-cleaning action during operation
• Phillips head screwdriver or a slotted head screwdriver

This reliable valve offers a straight through flow pattern that dramatically reduces pressure loss and reduces the risk of trapped debris. It has both an internal bleed and external bleed in addition to optional flow control. Heavy duty, corrosion and UV resistant PVC construction increases the life of the valve. Combination 1 in. and 1-1/4 in. provides the option to increase the pipe size to the valve increasing the flow rate. Tilt diaphragm-piston assembly allows for a straight flow path of the water increasing the flow rate while reducing the friction loss. Debris tolerant design provides flexibility for use in potable or dirty water applications.

• Heavy duty, corrosion and UV resistant PVC construction
• Allows for a straight flow path of water, increasing the flow rate while reducing friction loss
• Offers flexibility for use in potable or non-potable applications
• Provides for manual operation in system start up
• For residential applications
• Permits manual operation without discharging water outside valve
• No flow control
• Remove the solenoid without losing the internal plunger
• Screen is in flow path of water for self-cleaning action during operation
• Phillips head screwdriver or a slotted head screwdriver can be used to adjust nozzle

K-Rain's FN Series Fixed Pattern Female Nozzles deliver superior matched precipitation for the most popular arc settings. Carefully designed to provide superior coverage while minimizing wind drift. Our nozzles feature patterns with precise edges.

• Fixed 3 quarter circle pattern - 15 ft. spray nozzle
• Color coded - allows for easy identifications
• Extra long filter provides longer time between cleanings
• Matched precipitation - allows for even water distribution
• Adjustable stainless steel screw reduces the radius by up to 25%
• 4 distances plus 8 fixed patterns
• Available in 8 ft., 10 ft., 12 ft. and 15 ft. with quarter, half, 3 quarter and full circle
• Perfect addition to K-Rain's durable pro S or RPS spray lines
• Female threaded nozzles fit any other male threaded spray body on the market
• FN series nozzles are the perfect solution for all standard spray applications

K-Rain's matched precipitation female nozzles are compatible with all available male threaded bodies. Carefully designed to provide superior coverage while minimizing wind drift. Our nozzles feature patterns with precise edges.

• Fixed 3 quarter circle pattern - 10 ft. spray nozzle
• Color coded - allows for easy identifications
• Extra long filters provide longer time between cleanings
• Matched precipitation - allows for even water distribution
• Adjustable stainless steel screw reduces the radius by up to 25%
• 4 distances plus 8 fixed patterns
• Available in 8 ft., 10 ft., 12 ft. and 15 ft. with quarter, half, 3 quarter and full circle
• Perfect addition to K-Rain's durable pro S or RPS spray lines
• Female threaded nozzles fit any other male threaded spray body on the market
• FN series nozzles are the perfect solution for all standard spray applications

The Super Pro Rotor, with its patented flow shut-off, allows for easy range and flow adjustment and renders installations easier and drier. With a simple adjustment, you can shut off water flow at the head OR easily modify both flow and distance proportionally without changing nozzles. Super Pro has a patented Arc Memory Clutch that returns the rotor to its pre-set position. Designed for medium to large landscape areas. The Super Pro is packed with features that ensure reliability, saving the installer time, money and needless frustration.

• Water saving feature - easily adjust both water flow and distance proportionally and directly at the head
• Revolutionary patented easy arc set simplified arc set allows for wet or dry adjustment in seconds
• 4 in. riser - perfect for taller grass
• 3/4 in. female threaded NPT inlet - replaces all standard rotors
• 2N1 adjustable or continuous rotation - provides a full range of adjustment from 40 to a continuous, non-reversing circle
• Patented arc set degree markings - clearly indicates the current watering pattern and simplifies arc set adjustment
• Arc memory clutch - prevents internal gear damage and returns rotor to its prior setting automatically if nozzle turret is forced past its stop
• Time proven patented reversing mechanism - assures continuous reverse and return
• Ratcheting riser - allows for easy adjustment of your left starting position with a simple turn of the riser
• Rubber cover - seals out dirt and increases product durability
• Optional check valve prevents low head drainage

This pro series 150 1-1/2 in. model features a removable inlet cap to easily modify the configuration from globe to angle style. They also have a removable metering pin and external bleed screw promoting easy maintenance and manual operation.

• Heavy duty, corrosion and UV resistant PVC construction - increases the life of the valve
• External bleed screw with removable metering pin - allows for easy cleaning of the metering pin without disassembling the valve
• Manual external bleed screw - provides for manual operation in system start up
• Manual internal bleed through solenoid - provides for manual operation without discharging water outside the valve
• Captured plunger - allows for the solenoid to be removed without losing the internal plunger
• Removable inlet cap - allows for easy conversion from globe to angle - style valve
• Flow control - allows for precise flow adjustment and manual shut-off
• Heavy-duty santoprene diaphragm - unique design improves durability of diaphragm
• This model is the 1-1/2 in. (3.8 cm) female thread
• 5-year limited warranty

The ProSeries 150 Valve is ideal for residential and light commercial applications. This 1 in. model features a removable external bleed screw and metering pin to simplify cleaning and maintenance. With the External Bleed Screw, manual operation during start up is easy.

• Heavy duty, corrosion and UV resistant PVC construction - increases the life of the valve
• External bleed screw with removable metering pin - allows for easy cleaning of the metering pin without disassembling the valve
• Manual external bleed screw - provides for manual operation in system start up
• Manual internal bleed through solenoid - provides for manual operation without discharging water outside the valve
• Captured plunger - allows for the solenoid to be removed without losing the internal plunger
• Compact design - for tight installations, install more valves in a single valve box
• Your choice of tools to open valve nut driver, Philips head screw driver or a slotted head screw driver
• Solenoid - 24 VAC, 60 cycle unit with a .43 Amp inrush current and .25 Amps holding current
• Balanced-pressure diaphragm for long life
• Slip configuration for low-cost installations

Carefully designed to provide superior coverage while minimizing wind drift. Color coded allows for easy identifications. Extra-long filters provide longer time between cleanings. Matched precipitation allows for even water distribution. Adjustable stainless-steel screw reduces the radius by up to 25%.

• Female nozzle
• 15 ft. side strip
• Color: coded black
• Compatibility female nozzles are compatible with all available male threaded spray risers
• Matched precipitation
• Even water distribution
• Perfect for near sidewalks
• Durable
• Easy to clean
• Easy installation

The Pro Sport Rotor is K-Rains next generation of professional rotor, designed specifically for sports turf applications. The Pro Sport comes standard with a unique triple nozzle. The triple nozzle configuration consists of a primary nozzle for long distance and two secondary nozzles for mid-range and short distance coverage. This nozzle design provides even water distribution. Pro Sport comes in a high speed version, ideal for quick wet downs and dust control. Available in plastic or the ever popular stainless steel.

• 4 in. pop-up height
• Revolutionary patented easy arc set simplified arc set allows for wet or dry adjustment in seconds
• Pre-installed 10 GPM triple nozzle configuration-ensures even distribution of water
• Two in one adjustable or continuous rotation-provides a full range of adjustment from 40 to a continuous full circle
• Patented arc set degree markings-clearly indicates the current watering pattern and simplifies arc set adjustment
• Arc memory clutch-prevents internal gear damage and returns rotor to its prior setting automatically if nozzle turret is forced past its stop
• Time proven patented reversing mechanism-assures continuous reverse and return
• Heavy duty rubber cover-seals out dirt and increases product durability
• Rubber mud guard-allows sprinkler to be installed below grade
• Factory installed check valve - prevents low head drainage
• 5 year limited warranty

This Pro series 150 2 in. model features a removable inlet cap to easily modify the configuration from globe to angle style. They also have a removable metering pin and external bleed screw promoting easy maintenance and manual operation. 5-year warranty.

• Heavy duty, corrosion and UV resistant PVC construction - increases the life of the valve
• External bleed screw with removable metering pin - allows for easy cleaning of the metering pin without disassembling the valve
• Manual external bleed screw - provides for manual operation in system start up
• Manual internal bleed through solenoid - provides for manual operation without discharging water outside the valve
• Captured plunger - allows for the solenoid to be removed without losing the internal plunger
• Removable inlet cap - allows for easy conversion from globe to angle - style valve
• Flow control - allows for precise flow adjustment and manual shut-off
• Heavy-duty santoprene diaphragm - unique design improves durability of diaphragm
• Model is the 2 in. (5 cm) female thread
• 5-year limited warranty

• Nozzle not included
• Molded in High-Impact ABS
• The durable Pro S Series Spray is a low-flush model, making it ideal for low-flow, low pressure situations
• Add optional Pressure-Regulation for a water efficient solution to your watering needs
• The Pro S Spray is designed to be compatible with all standard female threaded nozzles and is a direct replacement for Rain Bird 1800 series sprays
• The Pro S Riser assembly drops right in an existing Rain Bird 1800 series can
• 4 in. pop-up height
• Co-molded wiper seal-ensures a leak-free, full pop up operation, even under low pressure situations
• Cartridge design allows for easy removal and cleaning
• Treated with UV inhibitors for long life
• Seal is microbe resistant to reduce degradation and stick-ups
• Accepts female threaded nozzles
• Ratcheting riser-permits quick, easy alignment of spray pattern
• Heavy-duty retraction spring-strongest spring in the industry for positive retraction in all soil conditions
• Side and bottom inlets on 6 in. and 12 in. models
• Pre-installed flush cap
• Optional in-stem pressure regulator available for 4 in., 6 in. and 12 in. models

The MINIPRO Sprinkler is perfect for irrigating small lawn and landscape areas and saves water and money when used to replace spray heads. When considering the industry leading MINIPRO Sprinkler, think water efficiency. Now available in 3 popular heights, the MINIPRO brings flexibility to sprinkler system design.

• 12 in. pop-up height
• Revolutionary patented easy arc-set simplified arc set allows for wet or dry adjustment in seconds
• 1/2 in. inlet-replaces all standard mini rotors and pop-up sprays
• Adjustable to 360 degree - provides a full range of adjustment from 40 degree to 360 degree
• Patented arc set degree markings clearly indicates the current watering pattern and simplifies arc set adjustment
• Time proven patented reversing mechanism assures continuous reverse and return
• Ratcheting riser allows for easy adjustment of your left starting position with a simple turn of the riser
• Rubber cover seals out dirt and increases product durability
• Pre-installed 1.5 GPM nozzle
• Limited 5-year warranty

K-Rain KVF Female Thread Nozzles can be easily set (no tools required) at any angle from 0 degree to 360 degree , allowing sprinklers to be fine-tuned to exactly the precise pattern needed. KVF Nozzles' superior spray pattern ensures proper precipitation rates throughout the adjustment. KVF Nozzles are perfect for a-typical, hard-to-handle landscape shapes and walkways or irregularly shaped planter beds.

• Adjustable 17 ft. female thread spray nozzle
• Spray pattern adjusts between 0 - 360
• Extra long filters provides longer time between cleanings
• Adjustable stainless steel screw reduces the radius by up to 25%
• Color coded for easy identification during installation and maintenance
• Superior spray patterns
• Uniform water distribution
• Water efficient low flow rates
• Female threaded nozzles fit any other male threaded spray body on the market
• Choose from 8 ft., 10 ft., 12 ft., 15 ft. and 17 ft. (2,4; 3; 3,7; 4,6 and 5,2 m) configurations