Featuring an integrated LED light source, the 4 ft. LED Flushmount Wraparound Light from Lithonia Lighting mounts flush for wall or ceiling applications. Designed with an impact resistant-prismatic acrylic lens, this fixture uses ultra-efficient LED technology to help lower energy usage and costs. Delivering 2400 Lumens of illumination, this wraparound makes the perfect replacement for traditional 2-light fluorescent T8 or T12 wraps.

• Ideal for replacing 2-light fluorescent T8 or T12 wraps
• Efficient LED delivers 2400 Lumens using just 40-Watt of energy
• 2400 Lumens/4000K color temperature/85 CRI
• Thermal formed diffuser crafted of highly transmissive material to minimize lamp image and provide high-angle brightness control
• Integrated LED technology eliminates the need for bulb replacements
• Light engine delivers long life and excellent color to ensure quality, low-maintenance lighting
• UL certified to standards and listed for damp locations
• Backed by 5-years limited warranty

The Lithonia Lighting ESXF LED floodlight is a general-purpose flood that offers awide selection of options and flexibility. Easy access to adjustable lumen output, colorswitching, and a selectable photocell turns the ESXF into the fixture you need on the spot.With its wide flood (7x7) distribution and DLC performance, the ESXF is a cost-effectivesolution, great for illuminating yards, driveways, signage, patios, warehouses, and securityapplications.

• Adjustable Lumen Output Delivers 1500/3000/ 5000 Lumens
• Replaces up to 150W HID Fixtures. Adjustable lumen output 9W/1500 Lumens, 19W/3,000 lumens, 34W/5000 Lumens
• Switchable Color Temperature 3000/4000/5000K
• Selectable Photocell Included Standard
• TWO (2) Mounting options included- Yoke & Slipfitter
• 120/277 Volt
• CI Code: 276ALH

The FML4W wide housing LED wrap is designed with the renovator in mind. While compatible with new construction, it's no mystery the flexibility of the FML4W will keep renovation simple. A wider housing easily covers up existing blemishes from older fixtures, while the option to adjust lumens grants the perfect amount of light to any room. This is capped off with standard 0-10V dimming.

• The FML4W from Lithonia Lighting is ideal for replacing traditional 2, 3, or 4-lamp T8 or T12 wraps
• ENERGY SAVINGS: Long-life LEDs, coupled with high-efficiency drivers, provide superior quantity and quality of illumination for extended service life
• ADJUSTABLE LUMEN OUTPUT: ALO6 allows adjustment from 4000 to 5000 to 6000 lumens
• LISTINGS: CSA, DLC Standard, Damp location listed for areas subject to moisture
• VOLTAGE: Standard MVOLT for 120-277 volts to use in both residential and light commercial applications, easily mounts to surface using the recessed junction box
• HOURS OF LIFE: Long lasting LED technology maintains 85 percent of lumen output at 60,000 hours with 4000 Kelvin cool white color temperature
• DESIGN: The white polycarbonate diffuser provides even illumination and softens the appearance of the LEDs for a uniform appearance from below the ceiling
• INSTALL: Suitable for both new construction and renovation projects
• WARRANTY: 5-year limited warranty
• DIMENSIONS: 10 in x 47-7/8 in x 3 in

The 4 ft. LED Strip Light by Lithonia Lighting offers a traditional appearance while incorporating the latest LED technology. The diffuse polycarbonate lens provides smooth, linear illumination which is designed to resemble the classic look of a 2-Lamp fluorescent fixture. The LEDs provide an output of 4,500-Lumens for maximum energy efficiency. This strip light is ideal for commercial, retail, office, warehouse and display applications.

• TECHNOLOGY: The diffuse polycarbonate lens provides smooth, linear illumination which is designed to resemble the classic look of a 2-lamp fluorescent fixture
• ENERGY SAVINGS: Energy star certified by using minimal watts and providing the lumens needed to light the room
• DIMMING: Product is not designed to be used with a dimmer
• RATINGS: The fixture is tested to withstand a maximum line surge of 2.5kV/.2kA ring wave for indoor locations
• VOLTAGE: Fixture can function between 120 and 227 volts and may be surface or suspension mounted with appropriate mounting options (sold separately) and aligner locks in place for easy continuous row mounting
• HOURS OF LIFE: LEDs provide 80 color rendering index (CRI) at 4000K with a cool white color temperature
• INSTALLATION: Quick and simple to install with the snap-lock tool-less channel cover
• WARRANTY: Buy with confidence with a 5-year limited warranty
• DIMENSIONS: length 48-in. x width 2.62-in. x depth 2.16-in.
• The diffuse polycarbonate lens provides smooth, linear illumination which is designed to resemble the classic look of a 2-lamp fluorescent fixture
• Quick and simple to install with the snap-lock tool-less channel cover
• The fixture is tested to withstand a maximum line surge of 2.5kV/.2kA ring wave for indoor locations

The hinged diffuser design of the Lithonia Lighting 4 ft. Wraparound Fluorescent Ceiling Fixtures offers easy maintenance and cleaning. These fixtures feature durable plastic construction and an instant-on ballast to help prevent flickering. This fixture uses 2 (32-Watt) T8 Bulbs (not included).

• Die-formed from code gauge cold-rolled steel. Diffuser is extruded clear acrylic
• Energy saving and electronic ballasts are sound rated A 32-Watt, bulb type T8 (sold separately)
• Channel cover snaps into place without the use of tools and full end cap factory installed to reduce job site labor
• Continuous side flanges on fixture body provide light trap and continuous diffuser support to prevent accidental opening and simplify maintenance
• Diffuser has side prisms to help control brightness and bottom prisms to reduce lamp images
• Instant-on ballast eliminates flickering and humming
• Residential electronic ballast does not interfere with other electronic equipment
• 5-stage iron-phosphate pretreatment ensures superior paint adhesion and rust resistance
• UL listed, luminaire is suitable for damp locations

The Lithonia Lighting 4 ft. Replacement Wrap around Lens has a 2-bulb, square-basket design and is made of a clear, acrylic material. This lens is designed for use with standard Wrap around fixtures and is compatible with 324925 and 324930 light fixtures only.

• Clear, acrylic replacement wrap around lens
• For use with standard wrap around fixtures
• 4 ft. in L
• Compatible with the SB series 4 ft. 2 lamp square basket wraps from Lithonia Lighting only
• UL Listed

The Lithonia Lighting ESXF LED floodlight is a general-purpose flood that offers awide selection of options and flexibility. Easy access to adjustable lumen output, colorswitching, and a selectable photocell turns the ESXF into the fixture you need on the spot.With its wide flood (7x7) distribution and DLC performance, the ESXF is a cost-effectivesolution, great for illuminating yards, driveways, signage, patios, warehouses, and securityapplications.

• Adjustable Lumen Output Delivers 3500/5500/7500 Lumens
• Replaces up to 250W HID. Adjustable Lumen output 22W/3,500 Lumens, 37W/ 5,500 Lumens, 56W/ 7,500 Lumens
• Switchable Color Temperature 3000/4000/5000K
• Selectable Photocell Included Standard
• TWO (2) Mounting options included- Yoke & Slipfitter
• 120/277 Volt
• CI Code: 276ALU

The Lithonia Lighting Wraparound clear prismatic lens is made to fit the Lithonia Lighting Traditional 1 ft. x 4 ft. Wrap only. This lens is a replacement for the LB series. The lens is made of acrylic to prevent discoloring over time.

• 48 in. x 10 in.
• This clear acrylic prismatic lens is compatible with the Lithonia Lighting LB series traditional wraparound fixtures.
• Diffuser for LB48", 2 lamp - T8 Lamps
• Lens only
• Acrylic construction
• Lens only works with lithonia lighting models that start with LB 2 32 (diffuser for LB48 in., 2 lamp - T8 lamps)

The LED Saturn Linear Flush Mount offers general ambient lighting from a decorative flush mount fixture. The LED engine delivers a long life of energy savings and reduced maintenance. With finishes in brushed nickel and bronze, this fixture is versatile and will look great in a variety of spaces.

• OPTICS: The sanded white acrylic diffuser delivers 3,200 lumens while softening the appearance of the LEDs
• ENERGY SAVINGS: Provides energy savings by using minimal watts and providing the lumens needed to light the room
• CONSTRUCTION: Available in brushed nickel and bronze finishes, the dual trim frames complement the round LED Saturn offering
• RATINGS: CSA certified to US and Canadian standards, listed for damp locations
• VOLTAGE: Operates at 120-Volts, 60Hz
• HOURS OF LIFE: Long-lasting LED technology maintains 70 percent of lumen output for up to 60,000 hours
• INSTALLATION: Flush mount install
• NON-DIMMABLE: Use with non-dimmable switches only
• WARRANTY: 5-year limited warranty
• DIMENSIONS: 47.66 in. x 10 in. x 2.81 in.

STACK Switch provides both functionality and efficiency. Selectable lumens allow for a variety of mounting heights and switchable color temperature allows you to fine-tune the look of your space. It is the fully switchable version of the next generation family of products. STACK Switch is the perfect choice for schools, commercial office spaces and many more applications.

• DESIGN: Wide 7" lens and curved reflector give STACK a high-end aesthetic.
• ENERGY SAVINGS: Long-life LEDs, Long-life LED's, coupled with high-efficiency drivers provide superior quality of light and extended service life.
• DIMMING: 0-10V dimming allows for you to get the brightness of your space just right.
• RATINGS/LISTINGS: CSA, IC, DLC, Damp Location
• VOLTAGE: MVOLT - functions with 120v - 277v
• HOURS OF LIFE: 80% LED lumen maintenance at 60,000 hours (L80/60,000)
• INSTALLATION: Easy installation in T-grid ceilings, Surface mount boxes, or, drywall grid adapters.
• WARRANTY: 5-year limited warranty
• DIMENSIONS : (l x w x h) 2x4: 47.75" x 23.75" x 1.9"

The 4 ft. long LED Troffer from Lithonia Lighting delivers general ambient lighting in applications such as schools, offices and hospitals. Long-life LEDs, coupled with energy efficient drivers, provide extended service life. Low maintenance and easy to install, this troffer works well in applications where LED is desired and budget-consciousness is needed.

• Steel construction in gloss white
• 29-Watt LED; included
• Energy efficient LED technology allows you to save money on your energy bill
• 120-Volt LED
• Clear acrylic lens provides even light distribution
• 4000K (cool white)
• Brightness: 3980 Lumens

TWX LED wall-Pack family, a ground-up design that has the low initial cost customers demand while providing superior performance and a traditional form. The TWX1 LED is energy efficient saving up to 83% in energy costs when replacing a metal halide luminaire. The Adjustable Light Output (ALO) feature allows the contractor to set the light output during installation, to a level perfectly suited for the job site. The TWX1 LED ALO luminaires can replace anything from a CFL to 100-Watt metal halide luminaire.

• Adjustable light output maximizes flexibility in the field
• TWX1 LED is energy efficient saving up to 83% in energy costs when replacing a metal halide luminaire
• Hardwired on/off capability only
• CSA certified to US and Canadian standards, listed as a Design Lights Consortium (DLC) qualified product and IP65 rated for outdoor applications
• MVOLT driver operates on any line voltage from 120-Volt to 277-Volt (50 Hz/60 Hz) and can be mounted directly over a standard electrical junction box or back wiring can be connected and stored in the internal compartment
• Light engine(s) configurations consist of high-efficacy LEDs where the advanced optical design uses both reflector and refractor technologies that work together to create superior illumination and further throw, getting the light where it is needed
• Exterior painted parts are protected by a zinc-infused super durable TGIC thermoset powder coat finish providing superior resistance to corrosion and weathering withstanding extreme climate changes without cracking or peeling
• 5-year limited warranty

Versatile IC and non-IC ratings for this remodel construction can make it an easy choice. The Lithonia Lighting 6-1/2 in. Aluminum Recessed Lighting Remodel unit helps you light a room with the power of incandescence.

• Durable aluminum design with Air-tite construction
• Requires 65-Watt par 30 incandescent bulbs (not included)
• For use in new construction, 3 included remodel clips support installation in plaster, sheet rock and mechanical ceilings, supports direct burial in insulation
• UL Listed
• For installation using factory-assembled wiring, removable J-box for quick and easy access
• 1-year limited warranty
• 120-Volt

Recessed housing rated IC or Non-IC for new construction applications. Approved for non-IC ceiling applications and through-branch circuit wiring. Approved for most wiring and ceiling types.

• Aluminum housing with galvanized steel pan
• Ground wire provided
• Removable J-box doors for easy access
• Retaining clips riveted to top of reflector hold trim inside housing
• Approved for direct burial in insulation and all ceiling and wiring types
• Air-tight 6 in. recessed incandescent housings are rated IC/Non-IC for 2x8 new construction
• Expandable bar hangers allow for off-center mounting in wood joist or T-bar ceilings, length of 25-1/4 in. maximum 13-1/4 in. minimum or cut to fit 9 in. O.C joist construction
• Damp location listed (See trim selection for wet location listing)

The Lithonia Lighting CPANL is an edge-lit LED flat panel that provides a glare-free luminous appearance. The 1 ft. x 4 ft. CPANL provides superior ambient lighting perfect for commercial applications such as retail spaces, offices, hospitality and education. Its low-profile design provides increased installation flexibility especially in restricted plenum spaces and the switchable lumen feature allows you to toggle between 3 present lumen outputs for an optimal lighting experience.

• Easy and safe installation, low-profile design is perfect for restricted plenum spaces, ideal for new construction or renovation
• Dimmable, high-efficiency LED's provide general illumination with a cool white 4000K color temperature, switchable lumen feature allows you to toggle between 2,400 Lumens, 3,300 Lumens and 4,400 Lumens conveniently on the jobsite to choose light output and wattage usage
• 0-Volt to 10-Volt dimming driver, dims to 10% to control light levels and save energy, see specification sheet for dimmer compatibilities
• CSA certified to meet US and Canadian standards for performance and safety
• Mounting hardware included for installation into grid ceilings
• Save on maintenance time and expense with the luminaire's extended service life, 70% LED lumen maintenance at 60,000-hours
• Seamless, aluminum frame is durable and prevents light leak in the corners, the satin white lens provides excellent shielding and fully luminous appearance for a contemporary design aesthetic
• 5-year limited warranty

• Lithonia Lighting Quantum LED Exit Sign, White Housing, Selectable Red/Green
• Ideal for applications requiring attractive, quick-installation exit signs and low energy consumption
• Engineering-grade thermoplastic housing is impact-resistant, scratch-resistant, and corrosion-proof.
• Switchable Green and Red Lettering
• LQM ships with an extra faceplate to quickly convert from single to double face exit sign depending on the application. Directional chevrons can be easily removed and reinserted depending on the application
• Providing 90-minutes battery capacity
• Mounting canopy allows for top, back or end mounting. Back mount standard for single face only
• 1.2V, 900mAH Ni-Cad Battery
• MFG# 2889RX

Lithonia Lighting COMPACT PRO LED High Bay, Selectable CCT, 83/103/125W, White. Compact Design Saves Time And Money During Installation. Innovative Glare Control Lens Meets New Dlc 5.1 Standards. Robust 6kv Surge Protection Standard Per Ansi Standards For Industrial Environments. Operates Up To 55degree C Ambient. Includes Mounting Hardware (V-Hook & 36" Hanger Chain). Switchable Lumens - 12000lm, 15000lm And 18000lm. Switchable Cct- 4000k And 5000k. Mfg #280MPG

• Compact Design Saves Time And Money During Installation
• Innovative Glare Control Lens Meets New Dlc 5.1 Standards
• Robust 6kv Surge Protection Standard Per Ansi Standards For Industrial Environments
• Operates Up To 55degree C Ambient

STACK Switch provides both functionality and efficiency. Selectable lumens allow for a variety of mounting heights and switchable color temperature allows you to fine-tune the look of your space. It is the fully switchable version of the next generation family of products. STACK Switch is the perfect choice for schools, commercial office spaces and many more applications.

• DESIGN: Wide 7" lens and curved reflector give STACK a high-end aesthetic.
• ENERGY SAVINGS: Long-life LEDs, Long-life LED's, coupled with high-efficiency drivers provide superior quality of light and extended service life.
• DIMMING: 0-10V dimming allows for you to get the brightness of your space just right.
• RATINGS/LISTINGS: CSA, IC, DLC, Damp Location
• VOLTAGE: MVOLT - functions with 120v - 277v.
• HOURS OF LIFE: 80% LED lumen maintenance at 60,000 hours (L80/60,000)
• INSTALLATION: Easy installation in T-grid ceilings, Surface mount boxes, or, drywall grid adapters.
• WARRANTY: 5-year limited warranty
• DIMENSIONS : (l x w x h) 2x2: 23.75" x 23.75" x 1.9"

The TWR1 LED wall pack offers a classic appearance with a traditional shape and is loaded with modern features including three adjustable light outputs (ALO), three switchable color temperatures (SWW) 30/40/50K CCT and a switchable dusk-to-dawn photocell. TWR1 provides ultimate versatility with 18 configurations in one SKU, making on-the-spot reconfiguring quick and easy. TWR1 is powerful yet efficient, delivering 2,300 - 8,500 lumens and capable of replacing up to a 250w HID while saving up to 86% in energy costs. Offering an expected service life of more than 20 years, the TWR1 LED eliminates frequent lamp and ballast replacements associated with traditional technologies. Designed to provide a cost-effective, energy-efficient solution when replacing the entire site or only a portion of the buildings wall packs. TWR1 is the ideal choice for outdoor wall-mounted applications including loading areas, building facades, driveways, and parking areas.

• Design: the lithonia lighting twr1 LED wall pack is equipped with adjustable lumen output (up to 8,500 Lumens), switchable CCT (30K/40K/50K), and a switchable photocell allowing the contractor to customize to a level perfectly suited for the job site
• Energy savings: long-life LEDs, coupled with a high-efficiency driver, provide superior illumination and extended service life with energy savings of up to 86% when replacing HID wall packs
• Photocell: switchable photocell for dusk-to-dawn operation
• Ratings: UL Listed to U.S. and Canadian safety standards for wet locations, IP65 rated, DesignLights Consortium (DLC) qualified product
• Voltage: UVOLT for 120-Volt to 347-Volt (50 Hz/60 Hz)
• hours of life: LEDs maintain 90% of light output at 100,000 hours of service or L90/100,00- hours
• Installation: designed for wall mounting above four feet from ground. housing is configured for mounting directly over a standard 4 in. outlet box (by others) or for surface wiring via any of four convenient ½ in. threaded conduit entry hubs
• WARRANTY: 5-year limited warranty
• Dimensions: 13.2 in. W x 9.4 in. H x 7.2 in. D
• Adjustable lumen output: 2,300 Lumens, 5,300 Lumens, 8,500 Lumens
• Switchable color temperature: 3000K 4000K 5000K
• CONSTRUCTION: Die-cast aluminum housing & borosilicate glass lens

The Compact Pro High Bay by Lithonia Lighting delivers an industrial-grade lighting solution in an exceptionally compact fixture that provides for cheaper shipping, condensed storage, and quicker installation. Built with quality to last and performance to get the job done at an affordable price for a base-level product. A great choice for affordable and reliable light-duty industrial applications like warehouses.

• At less than 6 pounds, it can be easily installed by 1 person while still providing the quality of light and durability necessary in an industrial application
• Integrated LEDs generate a nominal 12,000 lumens while efficiently using minimal watts to save money on utility bills
• Meets Highest Standards 6kV ANSI surge protection; UL, cUL certified to US and Canadian standards, listed for Damp Locations, maximum temperature rating up to 55C
• Hanging hardware included and allows for 120/277 multi-volt needs
• LEDs provided 80 color rendering index (CRI), nominal 12,000 lumens at 4000K with a cool white color temperature
• Length 14.4 in. x width 11.5 in. x depth 2.3 in
• Buy with confidence with a 5-year limited warranty

TWX LED wall-Pack family, a ground-up design that has the low initial cost customers demand while providing superior performance and a traditional form. The TWX3 LED is energy efficient saving up to 84% in energy costs when replacing a metal halide luminaire. The Adjustable Light Output (ALO) feature allows the contractor to set the light output during installation, to a level perfectly suited for the job site. The TWX3 LED ALO luminaires can replace anything from a 100-Watt to 400-Watt metal halide luminaire.

• Adjustable light output maximizes flexibility in the field
• TWX3 LED is energy efficient saving up to 84% in energy costs when replacing a metal halide luminaire
• Hardwired on/off capability only
• CSA certified to US and Canadian standards, listed as a Design Lights Consortium (DLC) qualified product and IP65 rated for outdoor applications
• MVOLT driver operates on any line voltage from 120-Volt to 277-Volt (50 Hz/60 Hz) and can be mounted directly over a standard electrical junction box or back wiring can be connected and stored in the internal compartment
• Light engine(s) configurations consist of high-efficacy LEDs where the advanced optical design uses both reflector and refractor technologies that work together to create superior illumination and further throw, getting the light where it is needed
• Exterior painted parts are protected by a zinc-infused super durable TGIC thermoset powder coat finish providing superior resistance to corrosion and weathering withstanding extreme climate changes without cracking or peeling
• 5-year limited warranty

The EU2C by Lithonia Lighting is a dual lamp head LED emergency light. Certified Title 20 for small battery charger systems, the EU2C provides emergency lighting while saving energy. It is ideal for lighting the path-of-egress in applications such as stairways, hallways and other small spaces at lower mounting heights.

• APPLICATIONS: Ideal for small commercial indoor applications requiring match existing equipment for mounting heights up to 10'
• RATINGS: UL damp location listed standard at 50-104 degrees F (10-40C), meets or exceeds all applicable requirements for Life Safety Code and state specific requirements
• VOLTAGE: Functions from 120-277 volts (50/60 Hz) with input wattage of 2 watts
• RATINGS: UL damp location listed standard at 50-104 degrees F, meets or exceeds all applicable requirements for Life Safety Code and state specific requirements
• VOLTAGE: Functions between 120 and 277V with input wattage of 2 watts
• HOURS OF LIFE: The typical life of the LED lamp is 10 years using two 1 Watt LED lamps for emergency light
• DESIGN: Injection-molded, flame-retardant, high-impact, thermoplastic housing with snap-fit design components with LED lamps for easy installation
• BATTERY: Emergency light provided with test switch, status indicator and rechargeable battery with maintenance-free 3.6V nickel-cadmium battery provides 90 minutes of emergency power
• WARRANTY: 2-year limited warranty
• INSTALLATION: Wall or ceiling mount
• DIMENSIONS: Length: 10.125in x Height 3.75in x Width 3.75in
• LED emergency light with dual lamp heads
• Lights 3 ft. path of egress with 14 ft. coverage at 7.5 in. mount height
• Essential to meet Life Safety Codes

The 4 ft. LED Linear Retro by Lithonia Lighting delivers general ambient lighting for surface-mount ceiling applications. The ENERGY STAR certified light engine delivers a long LED life and excellent color to ensure a quality, low-maintenance light installation. This linear LED light is ideal for applications such as kitchens, offices, hallways, corridors, foyers, bedrooms, closets, utility work areas and more. With a sleek design and a 50,000-hours maintenance-free LED life, the LED Linear Retro offers the perfect balance of style and reliability.

• 4 ft. LED linear flush mount features an impact-resistant polycarbonate diffuser with brushed nickel cast aluminum decorative end caps
• Integrated LED provides 3400 Lumens and 4000K bright white color temperature
• Energy star certified and Listed for damp locations
• UL Listed to US and Canadian safety standards
• Delivers general ambient lighting for surface-mount ceiling applications
• 5-year lmited warranty

Recessed housing rated Non-IC for remodel applications. Approved for non-IC ceiling applications and through-branch circuit wiring. Approved for most wiring and ceiling types.

• Aluminum housing
• Ground wire provided
• Removable J-box doors for easy access
• Retaining clips riveted to top of reflector hold trim inside housing
• Damp location listed
• Vertical adjustment of housing allows for flush mounting with ceiling face
• Suitable for ceilings up to 1-1/2 in. thick
• Trim options include 4 in. open, baffle, eyeball and PAR30 wet lite
• All trims are available in a white finish