The NIBCO 2 in. ABS DWV P-Trap is used in residential and commercial drain, waste and vent systems. The ABS DWV P-Trap features a hub x hub connection and provides a water seal so that wastewater will automatically be trapped in the arc of the configuration, thereby preventing unwanted gases from entering the household environment. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• Do not use primer with ABS
• Used under a plumbing fixture or drain to prevent sewer gas from escaping
• Hub x hub connections
• Solvent-welded connections
• NSF/ANSI Standard 14
• UL Listed 94V-0

The NIBCO 1-1/2 in. ABS P-Trap is designed to prevent sewer gas from escaping from a plumbing fixture or drain. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• Do not use primer with ABS
• Hub x hub connections
• Solvent-welded connections
• NSF/ANSI standard 14
• UL Listed 94V-0
• Maximum working pressure of 5 psi

Help prevent sewer gas from escaping by installing the NIBCO 1-1/2 in. ABS DWV Hub x Hub P-Trap under the discharge of a plumbing fixture or drain. The p-trap features hub x hub connections. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• ABS requires no primer
• Use under the discharge of a plumbing fixture or drain to help prevent sewer gas from escaping
• For use with non-pressurized sanitary systems
• Maximum working pressure of 5 psi
• Hub x hub solvent-welded connections
• NSF/ANSI standard 14
• UL Listed 94V-0

The NIBCO 1-1/2 in. ABS DWV Trap SPG x SJ Street Adapter is used in a non-pressurized sanitary system to adapt a fitting hub to a tubular trap at the floor or wall. Drain, Waste and Vent (DWV) allows removal of waste water and water-borne waste away from appliances and fixtures. ABS is lightweight, safe to handle and easy to install.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• ABS plastic material
• For above-ground DWV
• ABS solvent welds to fitting hub and incorporates slip joint for tubular traps
• Do not use primer with ABS
• NSF/ANSI Standard 14
• UL Listed 94V-0
• "11/2 I.D. and 1.625 O.D."

The NIBCO 1-1/2 in. ABS DWV Hub x Slip P-Trap allows for disassembly without cutting into the system. The P-trap has a maximum working pressure of 5 psi. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.

• ABS requires no primer
• Use under the discharge of a plumbing fixture or drain to prevent sewer gas from escaping
• Allows for disassembly without cutting into the system
• Hub x slip solvent-welded connections
• Maximum working pressure of 5 psi
• Includes union

The NIBCO 1-1/2 in. x 1-1/4 in. ABS DWV SPG x SJ Street Trap Adapter is used in a non-pressurized sanitary system to adapt a fitting hub to a tubular trap at the floor or wall. Drain, Waste and Vent (DWV) allows removal of waste water and water-borne waste away from appliances and fixtures. ABS is lightweight, safe to handle and easy to install.

• 11/2 X 11/4 in. Inside Diameter and 1 5/8 X 1 3/8 in. Outside Diameter
• ABS plastic material
• For above-ground DWV
• ABS solvent welds to fitting hub and incorporates slip joint for tubular traps
• Do not use primer with ABS
• NSF/ANSI Standard 14
• UL Listed 94V-0
• "11/2 X 11/4 I.D. and 1 5/8 X 1 3/8 O.D."

The NIBCO 1-1/2 in. ABS DWV P-Trap with union joint is used in residential and commercial drain, waste and vent systems. The ABS DWV P-Trap features a union joint and hub x hub connection. The P-Trap provides a water seal so that wastewater will automatically be trapped in the arc of the configuration, thereby preventing unwanted gases from entering the household environment.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• ABS requires no primer
• Use under the discharge of a plumbing fixture or drain to help prevent sewer gas from escaping
• Use in conjunction with a closet flange
• Helps allow for disassembly without cutting into the system
• For use with non-pressurized sanitary systems
• Hub x hub solvent-welded connections
• Maximum working pressure of 5 psi
• Includes union