Rely on the NIBCO 3 in. x 3 in. x 2 in. PVC DWV 45 degree H x H x H Wye for your PVC sanitary system. This wye leads a branch line to a horizontal drain line. Its hub connections are solvent welded. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.

• PVC requires a primer before cementing
• Connects a PVC branch line to a horizontal PVC drain line
• Solvent-welded connections
• NSF/ANSI standard 14
• UL Listed 94V-0
• NSF U.P certified

The NIBCO 3 in. PVC DWV long radius combination tee-wye is used in residential and commercial drain, waste and vent systems. The PVC DWV tee-wye features a long radius and a hub x hub x hub connection. The tee-wye allows for a connection to be made in continuous pipeline and branch out to a different direction.

• PVC requires a primer before cementing
• Use when connecting a horizontal PVC branch line into a vertical PVC drain line
• For non-pressurized sanitary systems
• All-hub solvent-welded connections
• Maximum working pressure of 5 psi
• Smooth interior finish for reduced friction and material buildup
• Helps remove wastewater and waterborne wastes from plumbing fixtures and appliances
• Do not test or use with compressed air or other gases
• Maximum service temperature 140 degree F

Choose the NIBCO 3 in. PVC DWV 45 H x H x H Wye for your PVC sanitary system. This wye reliably joins a branch line and a horizontal drain line. Prime and then solvent weld the hub connections. PVC DWV is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.

• PVC requires a primer before cementing
• Connects a PVC branch line to a horizontal PVC drain line
• Solvent-welded connections
• Smooth interior finish for reduced friction and material buildup
• Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
• Do not test or use with compressed air or other gases
• Maximum service temperature 140 degree F

The NIBCO 3 in. x 3 in. x 2 in. PVC DWV long radius combination tee-wye is used in residential and commercial drain, waste and vent systems. The PVC DWV tee-wye features a long radius and a hub x hub x hub connection. The tee-wye allows for a connection to be made in continuous pipeline and branch out to a different direction. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability and cost-effectiveness. PVC DWV is easy to install and is joined by solvent cementing or threading.

• PVC requires a primer before cementing
• Use when connecting a horizontal PVC branch line into a vertical PVC drain line
• For use with non-pressurized sanitary systems
• All-hub solvent-welded connections
• Maximum working pressure of 5 psi
• Smooth interior finish for reduced friction and material buildup
• Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
• Do not test or use with compressed air or other gases
• Maximum service temperature 140 degree F

Depend on the NIBCO 2 in. PVC DWV 45 H x H x H Wye to lead a branch line into a horizontal drain line in your PVC sanitary system. The hub connections require primer and solvent welds. PVC DWV is easy to install and is joined by solvent cementing or threading.

• PVC requires a primer before cementing
• Solvent-welded connections
• Smooth interior finish for reduced friction and material buildup
• Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
• Do not test or use with compressed air or other gases
• Maximum service temperature 140 degree F

Install the NIBCO 4 in. PVC DWV 45 degree H x H x H Wye to join a branch line to a horizontal drain line in a PVC sanitary system. Prime and then solvent weld the hub connections. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.

• PVC requires a primer before cementing
• Connects a PVC branch line to a horizontal PVC drain line
• Solvent-welded connections
• NSF/ANSI Standard 14
• UL Listed 94V-0
• NSF U.P. Certified

Add the NIBCO 4 in. x 4 in. x 3 in. PVC DWV 45 H x H x H Wye to your PVC sanitary system. It leads a branch line into a horizontal drain line. Solvent weld the hub connections.

• PVC requires a primer before cementing
• Connects a PVC branch line to a horizontal PVC drain line
• Solvent-welded connections
• Smooth interior finish for reduced friction and material buildup
• Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
• Do not test or use with compressed air or other gases
• Maximum service temperature 140F

Use the NIBCO 4 in. x 4 in. x 2 in. PVC DWV 45 H x H x H Wye to join a branch line to a horizontal drain line in a PVC sanitary system. After priming, it is connected with solvent welds. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.

• PVC requires a primer before cementing
• Connects a PVC branch line to a horizontal PVC drain line
• Solvent-welded connections
• NIBCO PVC DWV 45 wye is a used in residential and commercial drain, waste and vent systems
• NSF/ANSI Standard 14
• UL Listed 94V-0

The NIBCO PVC DWV long radius combination tee-wye is used in residential and commercial drain, waste and vent systems. The PVC DWV tee-wye features a long radius and a hub x hub x hub connection. The tee-wye allows for a connection to be made in continuous pipeline and branch out to a different direction.

• PVC requires a primer before cementing
• For non-pressurized sanitary systems
• Connects a horizontal PVC branch line into a vertical PVC drain line
• All-hub solvent-welded connections
• Maximum working pressure of 5 psi
• NSF/ANSI standard 14
• UL Listed 94V-0

The NIBCO 1-1/2 in. PVC DWV 45 H x H x H Wye secures a branch line to a horizontal drain line in a PVC sanitary system. Its hub connections are attached with primed solvent welds. The NIBCO PVC DWV female adapter is used in residential and commercial drain, waste and vent systems. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.

• PVC requires a primer before cementing
• Solvent-welded connections
• PVC DWV is easy to install and is joined by solvent cementing or threading
• ASTM D2665 and D3311
• NSF/ANSI standard 14

The NIBCO 4 in. PVC DWV All-Hub Long-Radius Sanitary Tee can be used to connect a horizontal PVC branch line into a vertical PVC drain line. The tee features all-hub solvent-welded connections. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness. PVC DWV is easy to install and is joined by solvent cementing or threading.

• PVC requires a primer before cementing
• Connects a horizontal PVC branch line into a vertical PVC drain line
• For non-pressurized sanitary systems
• All-hub solvent-welded connections
• Maximum working pressure of up to 5 psi
• Smooth interior finish for reduced friction and material buildup
• Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
• Do not test or use with compressed air or other gases
• Maximum service temperature 140 degree F

Use the NIBCO 2 in. x 2 in. x 1-1/2 in. PVC DWV 45 H x H x H Wye to join a branch line to a horizontal drain line in a PVC sanitary system. The hub connections must be primed and solvent welded. The NIBCO PVC DWV female adapter is used in residential and commercial drain, waste and vent systems.

• PVC requires a primer before cementing
• Connects a PVC branch line to a horizontal PVC drain line
• Solvent-welded connections
• Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness
• ASTM D2665 and D3311
• NSF/ANSI Standard 14
• UL Listed 94V-0
• NSF U.P. Certified

Use the NIBCO 3 in. x 3 in. x 1-1/2 in. PVC Hub x Hub x Hub Wye to fit a branch line into a horizontal drain line in a non-pressurized sanitary system. Its hub connections are solvent welded in place. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness. PVC DWV is easy to install and is joined by solvent cementing or threading.

• PVC requires a primer before cementing
• Connects a branch line into a horizontal PVC drain line
• Solvent-welded connections
• NSF/ANSI Standard 14
• UL Listed 94V-0
• NSF U.P. Certified

The NIBCO 4 in. x 4 in. x 23 in. PVC DWV Hub x Hub x Hub Long-Radius Tee can be used when connecting a horizontal PVC branch line into a vertical PVC drain line. DWV is used for non pressurized sanitary system Drain, Waste, and Vent. There are two types of DWV plastic: ABS (black plastic) and PVC (white plastic). The sanitary drainage and vent piping are installed to remove waste water and water-borne wastes from the plumbing fixtures and appliances.

• PVC requires a primer before cementing
• Use when connecting a horizontal PVC branch line into a vertical PVC drain line
• Hub x hub x hub solvent-welded connections
• Maximum working pressure of 5 psi
• ASTM D2665 and D3311
• NSF/ANSI Standard 14
• UL Listed 94V-0
• NSF U.P. Certified

Nibco 3" X 3" X 2" X 2" DWV PVC Double Wye. Maximum Service Temperature 140degree f. Do not test or use with compressed air or other gases. ASTM D2665 and D3311. NSF/ANSI Standard 14. UL Listed 94V-0. NSF U.P. Certified. Mfg #K26580I

• Maximum Service Temperature 140degree f
• Do not test or use with compressed air or other gases
• ASTM D2665 and D3311
• NSF/ANSI Standard 14

Nibco 3" PVC DWV H X H X H Double Wye. Maximum Service Temperature 140degree f. Do not test or use with compressed air or other gases. ASTM D2665 and D3311. NSF/ANSI Standard 14. UL Listed 94V-0. NSF U.P. Certified. Mfg #K26570I

• Maximum Service Temperature 140degree f
• Do not test or use with compressed air or other gases
• ASTM D2665 and D3311
• NSF/ANSI Standard 14

The NIBCO PVC DWV long radius combination tee-wye is used in residential and commercial drain, waste and vent systems. The PVC DWV tee-wye features a long radius and a hub x hub x hub connection. The tee-wye allows for a connection to be made in continuous pipeline and branch out to a different direction. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.

• PVC requires a primer before cementing
• Connects a horizontal PVC branch line into a vertical PVC drain line
• For non-pressurized sanitary systems
• All-hub solvent-welded connections
• Maximum working pressure of up to 5 psi
• Smooth interior finish for reduced friction and material buildup
• Helps remove wastewater and waterborne wastes from plumbing fixtures and appliances
• Do not test or use with compressed air or other gases
• Maximum service temperature 140 degree F

Nibco 2" PVC DWV H X H X H Double Wye. Maximum Service Temperature 140degree f. Do not test or use with compressed air or other gases. ASTM D2665 and D3311. NSF/ANSI Standard 14. UL Listed 94V-0. NSF U.P. Certified. Mfg #K26545I

• Maximum Service Temperature 140degree f
• Do not test or use with compressed air or other gases
• ASTM D2665 and D3311
• NSF/ANSI Standard 14

Add the NIBCO 6 in. PVC DWV 45 H x H x H Wye to your PVC sanitary system where a branch line must join a horizontal drain line. Prime and then solvent weld the hub connections. PVC DWV is easy to install and is joined by solvent cementing or threading.

• 6 in. Inside Diameter and 6.125 in. Outside Diameter
• PVC requires a primer before cementing
• Connects a PVC branch line to a horizontal PVC drain line
• Solvent-welded connections
• Smooth interior finish for reduced friction and material buildup
• Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
• Do not test or use with compressed air or other gases
• Maximum service temperature 140F
• "6 I.D. and 6.125 O.D."

Nibco 4" PVC DWV H X H X H Double Wye. Maximum Service Temperature 140degree f. Do not test or use with compressed air or other gases. ASTM D2665 and D3311. NSF/ANSI Standard 14. UL Listed 94V-0. NSF U.P. Certified. Mfg #K26586I

• Maximum Service Temperature 140degree f
• Do not test or use with compressed air or other gases
• ASTM D2665 and D3311
• NSF/ANSI Standard 14

The NIBCO PVC DWV 45-degree wye is a used in residential and commercial drain, waste and vent systems. The PVC DWV 45-degree wye features a hub x hub x hub connection and allows for a connection to be made in continuous pipeline and branch out to a different direction. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness. PVC DWV is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode. NIBCO plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.

• Maximum service temperature of 140 degree F
• Do not test or use with compressed air or other gases
• ASTM D2665 and D3311
• NSF/ANSI standard 14
• NSF/ANSI standard 14
• UL Listed 94V-0

Ipex 4" PVC Sewer Wye Sdr35 - GXGxg. Used In Gravity Sewer Systems. Eliminates infiltration and exfiltration. Easily outperforms concrete and corrugated PE joints. Pipe conforms to ASTM D3034 and ASTM F679. Corrosion Resistant, hydrogen sulfide (H2S) and other aggressive chemicals common in sanitary sewage. The 45 degree Wye is used when a branch line connects to the main pipe run. Gasketed ends at all 3 connections provide a secure and water-tight seal. Smooth inner walls provide systems with a Manning coefficient of 0.009, allowing for use of smaller diameters of pipe when compared to rough walled pipe. Mfg #443082

• Used In Gravity Sewer Systems
• Eliminates infiltration and exfiltration
• Easily outperforms concrete and corrugated PE joints
• Pipe conforms to ASTM D3034 and ASTM F679

Nibco 2" X 1-1/2" X 1-1/2" PVC DWV All Hub 45-Degree Wye Fitting. Maximum Service Temperature 140degree f. Do not test or use with compressed air or other gases. ASTM D2665 and D3311. NSF/ANSI Standard 14. UL Listed 94V-0. NSF U.P. Certified. Mfg #K09045I

• Maximum Service Temperature 140degree f
• Do not test or use with compressed air or other gases
• ASTM D2665 and D3311
• NSF/ANSI Standard 14

Nibco 1-1/2" PVC DWV All Hub Double Wye Fitting. Maximum Service Temperature 140degree f. Do not test or use with compressed air or other gases. ASTM D2665 and D3311. NSF/ANSI Standard 14. UL Listed 94V-0. NSF U.P. Certified. Mfg #K26530I

• Maximum Service Temperature 140degree f
• Do not test or use with compressed air or other gases
• ASTM D2665 and D3311
• NSF/ANSI Standard 14

The PVC DWV double wye is used in residential and commercial drain, waste and vent systems. The PVC DWV 45 degree double wye features all hub connections and allows for a connection to be made in continuous pipeline and branch out to different directions. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness. PVC DWV is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.

• Do not test or use with compressed air or other gases
• Maximum service temperature of 140 degree F
• NSF U.P. Certified
• ASTM D2665 and D3311
• NSF/ANSI standard 14
• UL Listed 94V-0

The NIBCO PVC DWV double wye is used in residential and commercial drain, waste and vent systems. The NIBCO PVC DWV double wye is used in residential and commercial drain, waste and vent systems. PVC DWV is easy to install and is joined by solvent cementing or threading.

• PVC DWV is easy to install and is joined by solvent cementing or threading
• Maximum service temperature of 140 degree F
• Do not test or use with compressed air or other gases
• ASTM D2665 and D3311
• NSF/ANSI standard 14
• UL Listed 94V-0

The NIBCO PVC DWV 45-degree wye is a used in residential and commercial drain, waste and vent systems. The PVC DWV 45-degree wye features a hub x hub x hub connection and allows for a connection to be made in continuous pipeline and branch out to a different direction. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness. PVC DWV is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode. NIBCO plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.

• Maximum service temperature of 140 degree F
• Do not test or use with compressed air or other gases
• ASTM D2665 and D3311
• NSF/ANSI standard 14
• ASTM D2665 and D3311
• NSF/ANSI standard 14
• UL Listed 94V-0

The NIBCO PVC DWV long radius combination tee-wye is used in residential and commercial drain, waste and vent systems. The PVC DWV tee-wye features a long radius and a Hub x Hub x Hub connection. The tee-wye allows for a connection to be made in continuous pipeline and branch out to a different direction.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• Maximum service temperature 140 degree F
• Do not test or use with compressed air or other gases
• Connects a horizontal PVC branch line into a vertical PVC drain line
• All-hub solvent-welded connections
• Maximum working pressure of 5 psi
• NSF/ANSI standard 14
• UL Listed 94V-0

Ipex 6"X4" PVC Sewer Wye Sdr35 - GXGxg. Used In Gravity Sewer Systems. Eliminates infiltration and exfiltration. Easily outperforms concrete and corrugated PE joints. Pipe conforms to ASTM D3034 and ASTM F679. Corrosion Resistant, hydrogen sulfide (H2S) and other aggressive chemicals common in sanitary sewage. This 45 degree Wye is used when a smaller (4") branch line connects to the main 6" pipe run. Gasketed ends at all 3 connections provide a secure and water-tight seal. Smooth inner walls provide systems with a Manning coefficient of 0.009, allowing for use of smaller diameters of pipe when compared to rough walled pipe. Mfg #443090

• Used In Gravity Sewer Systems
• Eliminates infiltration and exfiltration
• Easily outperforms concrete and corrugated PE joints
• Pipe conforms to ASTM D3034 and ASTM F679

The NIBCO PVC DWV long radius combination tee-wye is used in residential and commercial drain, waste and vent systems. The PVC DWV tee-wye features a long radius and a hub x hub x hub connection. The tee-wye allows for a connection to be made in continuous pipeline and branch out to a different direction.

• PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode
• PVC DWV is easy to install and is joined by solvent cementing or threading
• Maximum service temperature of 140 degree F
• Do not test or use with compressed air or other gases
• ASTM D2665 and D3311
• NSF/ANSI standard 14
• UL listed 94V-0

The NIBCO PVC DWV double wye is used in residential and commercial drain, waste and vent systems. The PVC DWV 45 degree double wye features all hub connections and allows for a connection to be made in continuous pipeline and branch out to different directions. PVC DWV is easy to install and is joined by solvent cementing or threading.

• PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode
• Maximum service temperature of 140 degree F
• Do not test or use with compressed air or other gases
• ASTM D2665 and D3311
• NSF/ANSI standard 14
• UL Listed 94V-0

Nibco 4 " X 4 " X 3 " X 3 " PVC DWV 45-Degree Double Hub Wye Fitting. Maximum Service Temperature 140degree f. Do not test or use with compressed air or other gases. ASTM D2665 and D3311. NSF/ANSI Standard 14. UL Listed 94V-0. NSF U.P. Certified. Mfg #K26600I

• Maximum Service Temperature 140degree f
• Do not test or use with compressed air or other gases
• ASTM D2665 and D3311
• NSF/ANSI Standard 14

The NIBCO PVC DWV double wye is used in residential and commercial drain, waste and vent systems. The PVC DWV 45 degree double wye features all hub connections and allows for a connection to be made in continuous pipeline and branch out to different directions. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.

• PVC construction
• Use for non-pressurized sanitary system drain, waste and vent
• Helps remove wastewater and water-borne wastes from your plumbing fixtures and appliances (fixtures and appliances sold separately)
• Helps provide air circulation within your drainage piping (sold separately)
• Brings 3 PVC DWV branch lines into a horizontal drain pipe (lines and pipes sold separately)
• Compatible with PVC pipes (sold separately)
• Solvent-welded connections
• Requires a primer before cementing (primer not included)
• 5 psi maximum working pressure