Securely connect copper tubes with the 3/4 in. ProPress bronze union. This zero-lead fitting makes it simple to disconnect tubes without cutting or damaging them.Press connections make installing this zero-lead union quick and efficient. Unlike traditional pipe fittings, there's no need for calibration, flame or heavy equipment. Instead, Viega ProPress bronze unions install in just four easy steps: cut the copper tube to length, remove any burrs and surface imperfections, measure and mark the fitting insertion depth, and use a press tool to connect the Viega ProPress union for a secure connection. Smart Connect technology identifies unpressed connections during pressure testing to ensure proper connections the first time and eliminate callbacks.Approved to the most codes and standards of any other press fitting system (IPC, UPC and NSF included), and with more than 400 different fitting configurations to suit virtually any type of plumbing or HVAC job, Viega ProPress unions are the top choice of professionals around the globe.

• Designed for use with ASTM B88 and B75 tubing, not compatible with PEX
• Compatible systems include potable water, hydronics and more
• Installs in 7 seconds or less with a press tool - no flame, solder or flux required
• Viega Smart Connect technology helps installers identify unpressed fittings
• Press technology eliminates the need for burn permits or fire watch
• Wet or dry connections allow quick repairs on existing systems
• Durable internal EPDM rubber seals for watertight connections
• Rated for 0-250ºF, up to 300 PSI for water applications
• Zero Lead solution certified under NSF-61-373
• Reliability guaranteed by 50-year limited warranty

Viega ProPress is the trusted copper press joining solution. Since its introduction in 1999, it has reduced overall job costs, saved time and increased reliability on jobsites across the globe. Viega is the only company with Smart Connect, a technology that helps installers easily identify an unpressed fitting, providing them with added confidence in their connections. With system-matched tools and jaws, press connections are made in seconds, making Viega ProPress suitable for virtually any type of project.

• Viega Smart Connect makes secure connection in less than 7 seconds
• Minimizes system downtime by allowing for wet connection
• Fast and easy to use
• No flame, solder, flux, or heavy equipment needed
• Helps installers easily identify unpressed connections during pressure testing
• Lead free

Securely connect copper tubes with the 1 in. ProPress bronze union. This zero-lead fitting makes it simple to disconnect tubes without cutting or damaging them.Press connections make installing this zero-lead union quick and efficient. Unlike traditional pipe fittings, there's no need for calibration, flame or heavy equipment. Instead, Viega ProPress bronze unions install in just four easy steps: cut the copper tube to length, remove any burrs and surface imperfections, measure and mark the fitting insertion depth, and use a press tool to connect the Viega ProPress union for a secure connection. Smart Connect technology identifies unpressed connections during pressure testing to ensure proper connections the first time and eliminate callbacks. Approved to the most codes and standards of any other press fitting system (IPC, UPC and NSF included), and with more than 400 different fitting configurations to suit virtually any type of plumbing or HVAC job, Viega ProPress unions are the top choice of professionals around the globe.

• Designed for use with 1-in. ASTM B88 and B75 tubing, not compatible with PEX
• Compatible systems include potable water, hydronics and more
• Installs in 7 seconds or less with a press tool - no flame, solder or flux required
• Viega smart connect technology helps installers identify unpressed fittings
• Press technology eliminates the need for burn permits or fire watch
• Wet or dry connections allow quick repairs on existing systems
• Durable internal EPDM rubber seals for watertight connections
• Rated for 0-250°F, up to 300 PSI for water applications
• Zero lead solution certified under NSF-61-372
• Reliability guaranteed by 50-year limited warranty

Viega ProPress is the trusted copper press joining solution. Since its introduction in 1999, it has reduced overall job costs, saved time and increased reliability on jobsites across the globe. Viega is the only company with Smart Connect, a technology that helps installers easily identify an unpressed fitting, providing them with added confidence in their connections. With system-matched tools and jaws, press connections are made in seconds, making Viega ProPress suitable for virtually any type of project.

• Viega Smart Connect makes secure connection in less than 7-seconds
• Minimizes system downtime by allowing for wet connection
• Fast and easy to use
• No flame, solder, flux, or heavy equipment needed
• Helps installers easily identify unpressed connections during pressure testing
• Lead free

Securely connect copper tubes with the 3/4 in. ProPress bronze union. This zero-lead fitting makes it simple to disconnect tubes without cutting or damaging them.Press connections make installing this zero-lead union quick and efficient. Unlike traditional pipe fittings, there's no need for calibration, flame or heavy equipment. Instead, Viega ProPress bronze unions install in just four easy steps: cut the copper tube to length, remove any burrs and surface imperfections, measure and mark the fitting insertion depth, and use a press tool to connect the Viega ProPress union for a secure connection. Smart Connect technology identifies unpressed connections during pressure testing to ensure proper connections the first time and eliminate callbacks.Approved to the most codes and standards of any other press fitting system (IPC, UPC and NSF included), and with more than 400 different fitting configurations to suit virtually any type of plumbing or HVAC job, Viega ProPress unions are the top choice of professionals around the globe.

• Designed for use with ASTM B88 and B75 tubing, not compatible with PEX
• Compatible systems include potable water, hydronics and more
• Installs in 7 seconds or less with a press tool - no flame, solder or flux required
• Viega Smart Connect technology helps installers identify unpressed fittings
• Press technology eliminates the need for burn permits or fire watch
• Wet or dry connections allow quick repairs on existing systems
• Durable internal EPDM rubber seals for watertight connections
• Rated for 0-250ºF, up to 300 PSI for water applications
• Zero Lead solution certified under NSF-61-379
• Reliability guaranteed by 50-year limited warranty

Securely connect copper tubes with the 1/2 in. ProPress bronze union. This zero-lead fitting makes it simple to disconnect tubes without cutting or damaging them.Press connections make installing this zero-lead union quick and efficient. Unlike traditional pipe fittings, there's no need for calibration, flame or heavy equipment. Instead, Viega ProPress bronze unions install in just four easy steps: cut the copper tube to length, remove any burrs and surface imperfections, measure and mark the fitting insertion depth, and use a press tool to connect the Viega ProPress union for a secure connection. Smart Connect technology identifies unpressed connections during pressure testing to ensure proper connections the first time and eliminate callbacks.Approved to the most codes and standards of any other press fitting system (IPC, UPC and NSF included), and with more than 400 different fitting configurations to suit virtually any type of plumbing or HVAC job, Viega ProPress unions are the top choice of professionals around the globe.

• Designed for use with ASTM B88 and B75 tubing, not compatible with PEX
• Compatible systems include potable water, hydronics and more
• Installs in 7 seconds or less with a press tool - no flame, solder or flux required
• Viega Smart Connect technology helps installers identify unpressed fittings
• Press technology eliminates the need for burn permits or fire watch
• Wet or dry connections allow quick repairs on existing systems
• Durable internal EPDM rubber seals for watertight connections
• Rated for 0-250ºF, up to 300 PSI for water applications
• Zero Lead solution certified under NSF-61-378
• Reliability guaranteed by 50-year limited warranty

Nibco 1" Wrot Copper Press X Press Union PCH633. Operating Pressure 200 Psi Max, (125 Psi For Natural Gas Applications) Depending On The Application. Temperature range -40degree F to 180degree F. ASTM B75 Alloy C12200 Copper. IFGC International Fuel Gas Code. NFPA 54/Z223.1 National Fuel Gas Code. NFPA 58 Liquified Petroleum Gas Code. UPC Chapter 12 Fuel Piping. NFPA30 Flammable and Combustible Liquids Code. NFPA30A Code for Motor Fuel Dispensing Facilities and Repair Garages. NFPA 31 Standard for the Installation of Oil Burning Equipment (supply line only). Third party certified to ANSI LC4/CSA 6.32. Third Party Certifiefd to IAPMO/UPC LCL-4. ICC-ES PMG 1036. Mfg #9256600HPC

• Operating Pressure 200 Psi Max, (125 Psi For Natural Gas Applications) Depending On The Application.
• Temperature range -40degree F to 180degree F
• ASTM B75 Alloy C12200 Copper
• IFGC International Fuel Gas Code

Nibco 1-1/2" Wrot Copper Press X Press Union-PCH633. Operating Pressure 200 Psi Max, (125 Psi For Natural Gas Applications) Depending On The Application. Temperature range -40degree F to 180degree F. ASTM B75 Alloy C12200 Copper. IFGC International Fuel Gas Code. NFPA 54/Z223.1 National Fuel Gas Code. NFPA 58 Liquified Petroleum Gas Code. UPC Chapter 12 Fuel Piping. NFPA30 Flammable and Combustible Liquids Code. NFPA30A Code for Motor Fuel Dispensing Facilities and Repair Garages. NFPA 31 Standard for the Installation of Oil Burning Equipment (supply line only). Third party certified to ANSI LC4/CSA 6.32. Third Party Certifiefd to IAPMO/UPC LCL-4. ICC-ES PMG 1036. Mfg #9256640HPC

• Operating Pressure 200 Psi Max, (125 Psi For Natural Gas Applications) Depending On The Application.
• Temperature range -40degree F to 180degree F
• ASTM B75 Alloy C12200 Copper
• IFGC International Fuel Gas Code

Nibco 2" Wrot Copper Press X Press Union PCH633. Operating Pressure 200 Psi Max, (125 Psi For Natural Gas Applications) Depending On The Application. Temperature range -40degree F to 180degree F. ASTM B75 Alloy C12200 Copper. IFGC International Fuel Gas Code. NFPA 54/Z223.1 National Fuel Gas Code. NFPA 58 Liquified Petroleum Gas Code. UPC Chapter 12 Fuel Piping. NFPA30 Flammable and Combustible Liquids Code. NFPA30A Code for Motor Fuel Dispensing Facilities and Repair Garages. NFPA 31 Standard for the Installation of Oil Burning Equipment (supply line only). Third party certified to ANSI LC4/CSA 6.32. Third Party Certifiefd to IAPMO/UPC LCL-4. ICC-ES PMG 1036. Mfg #9256650HPC

• Operating Pressure 200 Psi Max, (125 Psi For Natural Gas Applications) Depending On The Application.
• Temperature range -40degree F to 180degree F
• ASTM B75 Alloy C12200 Copper
• IFGC International Fuel Gas Code

Nibco 1-1/4" Wrot Copper Press X Press Union PCH633. Operating Pressure 200 Psi Max, (125 Psi For Natural Gas Applications) Depending On The Application. Temperature range -40degree F to 180degree F. ASTM B75 Alloy C12200 Copper. IFGC International Fuel Gas Code. NFPA 54/Z223.1 National Fuel Gas Code. NFPA 58 Liquified Petroleum Gas Code. UPC Chapter 12 Fuel Piping. NFPA30 Flammable and Combustible Liquids Code. NFPA30A Code for Motor Fuel Dispensing Facilities and Repair Garages. NFPA 31 Standard for the Installation of Oil Burning Equipment (supply line only). Third party certified to ANSI LC4/CSA 6.32. Third Party Certifiefd to IAPMO/UPC LCL-4. ICC-ES PMG 1036. Mfg #9256630HPC

• Operating Pressure 200 Psi Max, (125 Psi For Natural Gas Applications) Depending On The Application.
• Temperature range -40degree F to 180degree F
• ASTM B75 Alloy C12200 Copper
• IFGC International Fuel Gas Code

Securely connect copper tubes with the 1-1/4 in. ProPress bronze union. This zero-lead fitting makes it simple to disconnect tubes without cutting or damaging them.Press connections make installing this zero-lead union quick and efficient. Unlike traditional pipe fittings, there's no need for calibration, flame or heavy equipment. Instead, Viega ProPress bronze unions install in just four easy steps: cut the copper tube to length, remove any burrs and surface imperfections, measure and mark the fitting insertion depth, and use a press tool to connect the Viega ProPress union for a secure connection. Smart Connect technology identifies unpressed connections during pressure testing to ensure proper connections the first time and eliminate callbacks. Approved to the most codes and standards of any other press fitting system (IPC, UPC and NSF included), and with more than 400 different fitting configurations to suit virtually any type of plumbing or HVAC job, Viega ProPress unions are the top choice of professionals around the globe.

• Designed for use with 1-1/4-in. ASTM B88 and B75 tubing, not compatible with PEX
• Compatible systems include potable water, hydronics and more
• Installs in 7 seconds or less with a press tool - no flame, solder or flux required
• Viega smart connect technology helps installers identify unpressed fittings
• Press technology eliminates the need for burn permits or fire watch
• Wet or dry connections allow quick repairs on existing systems
• Durable internal EPDM rubber seals for watertight connections
• Rated for 0-250°F, up to 300 PSI for water applications
• Zero lead solution certified under NSF-61-372
• Reliability guaranteed by 50-year limited warranty

Nibco PCH633 1/2" Wrot Copper Press X Press Union. Operating Pressure 200 Psi Max, (125 Psi For Natural Gas Applications) Depending On The Application. Temperature range -40degree F to 180degree F. ASTM B75 Alloy C12200 Copper. IFGC International Fuel Gas Code. NFPA 54/Z223.1 National Fuel Gas Code. NFPA 58 Liquified Petroleum Gas Code. UPC Chapter 12 Fuel Piping. NFPA30 Flammable and Combustible Liquids Code. NFPA30A Code for Motor Fuel Dispensing Facilities and Repair Garages. NFPA 31 Standard for the Installation of Oil Burning Equipment (supply line only). Third party certified to ANSI LC4/CSA 6.32. Third Party Certifiefd to IAPMO/UPC LCL-4. ICC-ES PMG 1036. Mfg #9256400HPC

• Operating Pressure 200 Psi Max, (125 Psi For Natural Gas Applications) Depending On The Application
• Temperature range -40degree F to 180degree F
• ASTM B75 Alloy C12200 Copper
• IFGC International Fuel Gas Code

Nibco 3/4" Wrot Copper Press X Press Union PCH633. Operating Pressure 200 Psi Max, (125 Psi For Natural Gas Applications) Depending On The Application. Temperature range -40degree F to 180degree F. ASTM B75 Alloy C12200 Copper. IFGC International Fuel Gas Code. NFPA 54/Z223.1 National Fuel Gas Code. NFPA 58 Liquified Petroleum Gas Code. UPC Chapter 12 Fuel Piping. NFPA30 Flammable and Combustible Liquids Code. NFPA30A Code for Motor Fuel Dispensing Facilities and Repair Garages. NFPA 31 Standard for the Installation of Oil Burning Equipment (supply line only). Third party certified to ANSI LC4/CSA 6.32. Third Party Certifiefd to IAPMO/UPC LCL-4. ICC-ES PMG 1036. Mfg #9256500HPC

• Operating Pressure 200 Psi Max, (125 Psi For Natural Gas Applications) Depending On The Application
• Temperature range -40degree F to 180degree F
• ASTM B75 Alloy C12200 Copper
• IFGC International Fuel Gas Code

Viega PureFlow Press Tailpiece

• Resistant to corrosion and dezincification
• Easy and fast to install
• UL listed for NFPA 13D fire sprinkler applications
• Can be combined with copper systems

The 3/4 in. Copper Press x Press Union copper press fitting is NSF Listed, lead free and features a robust EPDM O-ring to ensure a clean leak free seal. Copper press fittings are designed for mechanical connection to ASTM B88-Type K, L and M copper tubing in hard drawn condition. Utilizing a hydraulic press tool, a watertight seal can be made in seconds without no flame, solder or flux. Each press fitting comes standard with leak before press technology to easily identify a fitting that has not been pressed. Connections can be made in wet or dry conditions reducing project downtime. These fittings are available in sizes from 1/2 in. to 1 in. and are compatible with all major hydraulic press tools.

• Connections can be made wet or dry for quick repairs on existing copper piping systems
• Create leak proof and secure connections in seconds
• Flameless press technology eliminates need for burn permits
• Multiple configurations available up from 1/2 in. up to 1 in.
• Certified to NSF/ANSI 61 and 372
• Leak before press technology assist installers in easily identifying unpressed connections
• No special or proprietary jaws are required
• Dezincification resistant
• Operating pressure 300 psi CWP
• Temperature range 32°F to 250°F depending on the application
• Suitable for underground installation
• UPC, cUPC and IPC approved
• Not suitable for steam or flammable gas service
• RIGID is a registered trademark of RIGID inc
• ProPress is a registered trademark of Viega NA
• VIRAX is a registered trademark of the Stanley Works
• ForceLogic is a trademark of Milwaukee tool
• DEWALT is a registered trademark of the Stanley Works

Viega MegaPressG with an HNBR sealing element is the first press fitting system for carbon steel pipe approved for use in gas and fuel oil applications. Viega MegaPressG is ideal for industrial, commercial and residential applications and performs well in both new installations and retrofit projects. MegaPressG joins carbon steel pipe reliably through the engineered design of the fittings and a battery-powered press tool.

• First press fitting system for carbon steel pipe approved for use in gas and fuel oil applications
• HNBR sealing element for use with natural gas and other hydrocarbons
• Fast, flameless and secure connections can be made wet or dry
• Viega smart connect helps installers identify unpressed joints
• Corrosion resistant
• Up to 90% installation time savings compared to welding

Viega MegaPressG with an HNBR sealing element is the first press fitting system for carbon steel pipe approved for use in gas and fuel oil applications. Viega MegaPressG is ideal for industrial, commercial and residential applications and performs well in both new installations and retrofit projects. MegaPressG joins carbon steel pipe reliably through the engineered design of the fittings and a battery-powered press tool.

• First press fitting system for carbon steel pipe approved for use in gas and fuel oil applications
• HNBR sealing element for use with natural gas and other hydrocarbons
• Fast, flameless and secure connections can be made wet or dry
• Viega smart connect helps installers identify unpressed joints
• Corrosion resistant
• Up to 90% installation time savings compared to welding

Viega MegaPressG with an HNBR sealing element is the first press fitting system for carbon steel pipe approved for use in gas and fuel oil applications. Viega MegaPressG is ideal for industrial, commercial and residential applications and performs well in both new installations and retrofit projects. MegaPressG joins carbon steel pipe reliably through the engineered design of the fittings and a battery-powered press tool.

• First press fitting system for carbon steel pipe approved for use in gas and fuel oil applications
• HNBR sealing element for use with natural gas and other hydrocarbons
• Fast, flameless and secure connections can be made wet or dry
• Viega smart connect helps installers identify unpressed joints
• Corrosion resistant
• Up to 90% installation time savings compared to welding

3/4 PRESS X PRESS UNION

• NIBCO press fittings are the fastest, easiest way to join copper tubing systems
• The press fittings can also be installed underground
• NIBCO PressG fittings are user friendly, quick and easy to install. When properly crimped a unique "N" witness mark is clearly visible
• NIBCO PressG fittings are designed to join with seamless copper water tube in residential and commercial gas and compressed air systems

1 PRESS X PRESS UNION

• NIBCO press fittings are the fastest, easiest way to join copper tubing systems
• The press fittings can also be installed underground
• NIBCO PressG fittings are user friendly, quick and easy to install. When properly crimped a unique "N" witness mark is clearly visible
• NIBCO PressG fittings are designed to join with seamless copper water tube in residential and commercial gas and compressed air systems

Viega ProPress Insert Stiffener

• BRONZE MATERIAL
• 3/4 INCH DIAMETER SIZE
• PROPRESS[R] BRAND
• END CONNECTION PROPRESS

The 1/2 in. Copper Press x Press Union copper press fitting is NSF Listed, lead free and features a robust EPDM O-ring to ensure a clean leak free seal. Copper press fittings are designed for mechanical connection to ASTM B88-Type K, L and M copper tubing in hard drawn condition. Utilizing a hydraulic press tool, a watertight seal can be made in seconds without no flame, solder or flux. Each press fitting comes standard with leak before press technology to easily identify a fitting that has not been pressed. Connections can be made in wet or dry conditions reducing project downtime. These fittings are available in sizes from 1/2 in. to 1 in. and are compatible with all major hydraulic press tools.

• Connections can be made wet or dry for quick repairs on existing copper piping systems
• Create leak proof and secure connections in seconds
• Flameless press technology eliminates need for burn permits
• Multiple configurations available up from 1/2 in. up to 1 in.
• Certified to NSF/ANSI 61 and 372
• Leak before press technology assist installers in easily identifying unpressed connections
• No special or proprietary jaws are required
• Dezincification resistant
• Operating pressure 300 psi CWP
• Temperature range 32°F to 250°F depending on the application
• Suitable for underground installation
• UPC, cUPC and IPC approved
• Not suitable for steam or flammable gas service
• RIGID is a registered trademark of RIGID inc
• ProPress is a registered trademark of Viega NA
• VIRAX is a registered trademark of the Stanley Works
• ForceLogic is a trademark of Milwaukee tool
• DEWALT is a registered trademark of the Stanley Works