Pressure Gauges, Relief Valves & Switches
The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.
- High quality
- Replace old and worn parts
- No special tools needed
- Easy to install
The product is well made with good surface treatment. The product is easy to use and attractive styling. It's easy to handle and install. The product is wide selection of product choices and great value.
- Easy to install with little tools required
- Competitively priced
- High quality
- Reliability
Utility water test gauge. This gauge is used for pressure tests of residential and commercial water lines. This gauge has a 300 psi scale and a 3/4 in. female swivel connection for water lines.
- 3/4 in. female copper alloy swivel connection for water lines
- Top mounted to make it easy to read when connected
- Accuracy 3-2-3% of span, ASME B40.1 grade B
- 2-1/2 in. dial and 300 psi standard
Detectable 5 mil Underground Marking Tape, 3" x 1000' GAS
- Aluminum foil alerts about buried installation below
- Designed to identify, protect, and locate buried lines
- Black letters and colored background for clear visibility
- Designed for open trench applications
Pressure switches are used to control electrically driven water pumps, suitable for all types of pumps: jets, submersible, reciprocating, etc. Pressure switches are needed for rural water systems that rely on wells to supply their water. Water is pumped from the well or other water source to the pressure tank and as the tank fills the air in the tank becomes pressurized. When the pre-set pressure is reached, the pressure switch contacts open to stop the pump. When water is used, the pressure on the pressure tank falls and as it reaches the pre-set cut in pressure of the switch the contacts close, starting the cycle over. These pressure switches are easily adjusted by following instruction inside the switch cover.
- Standard duty
- NEMA type 1 indoor enclosure
- 2 pole, rated 1-1/2 HP at 115 Vac, 2HP at 230 Vac
- Pressure connection: 1/4 in. NPSF, pressure setting 40-60
- Adjustable cut in/out: cut out range 20-65 psig
Utility gauge for commercial and industrial markets. Black steel case, chrome bezel, copper alloy internals. 2 in. dial with 1/4 NPT, dry only case.
- 2 in. dial size with standard 1/4 NPT
- Black steel case with brass wetted parts
- Glass lens
- Accuracy 3-2-3% of span, ASME B40.1 grade B
Utility gauge for commercial and industrial markets. Black steel case, chrome bezel, copper alloy internals. This gauge has a 2 dial, 1/4 NPT, 100 psi/bar scale.
- 2 in. dial 1/4 NPT
- Accuracy 3-2-3% of span, ASME B40.1 grade B
- 100 psi/bar scale with no logo
- Black steel case with brass wetted parts
Utility gauge for commercial and industrial markets. Black steel case, chrome bezel, copper alloy internals. This gauge has a 2 1/2 dial, 1/4 npt, 100 psi/bar scale.
- 2 12/ dial, 1/4 npt connection
- 100 psi/bar scale with no logo
- Accuracy 3-2-3% of span, ASME B40.1 Grade B
- Black steel case, brass internals, dry only case.
Utility gauge for commercial and industrial markets. This pressure gauge has a 60 psi/bar scale and dry only. The dial size is 2 in. with a 1/4 NPT connection.
- 2 in. dial 1/4 NPT connection
- Accuracy 3-2-3% of span, ASME B40.1 grade B
- 60 psi/bar scale with no logo
- Black steel case with brass internals
Pressure Switches are used to control electrically driven water pumps, suitable for all types of pumps: jets, submersible, reciprocating, etc. Pressure switches are needed for rural water systems that rely on wells to supply their water. Water is pumped from the well or other water source to the pressure tank and as the tank fills the air in the tank becomes pressurized. When the pre-set pressure is reached, the pressure switch contacts open to stop the pump. When water is used, the pressure in the pressure tank falls and as it reaches the pre-set cut in pressure of the switch the contacts close, starting the cycle over. These pressure switches are easily adjusted by following instruction inside the switch cover.
- Standard duty
- NEMA type 1 indoor enclosure
- 2 pole, rated 1-1/2 HP at 115 Vac, 2HP at 230 Vac
- Pressure connection: 1/4 in. NPSF, pressure setting 20-40
- Adjustable cut in/out: cut out range 20-65 psig
Pressure switches are used to control electrically driven water pumps, suitable for all types of pumps; jets, submersible, reciprocating, etc. Pressure switches are needed for rural water systems that rely on well to supply their water. Water is pumped from the well or other water source to the pressure tank and as the tank fills the air in the tank becomes pressurized. When the pre-set pressure is reached, the pressure switch contacts open to stop the pump. When water is used, the pressure in the pressure tank fall and as it reached the pre-set cut in pressure of the switch the contacts close, starting the cycle over. These pressure switches are easily adjusted by following instruction inside the switch cover.
- Standard duty
- NEMA type 1 indoor enclosure
- 2 pole, rated 1-1/2 HP at 115 Vac, 2HP at 230 VAC
- Pressure Connection: 1/4 in. NPSF, pressure setting 30-50
- Adjustable cut in/out: cut out range 20-65 psig
Utility gauge for commercial and industrial markets. Black steel case, chrome bezel, copper alloy internals. 2 in. Dial 1/4 NPT 30 psi/bar.
- 2 in. dial 1/4 NPT 30 psi
- Accuracy 3-2-3% of span, ASME B40.1 grade B
- 30 psi/bar scale no logo
- Black steel case, chrome bezel, copper alloy inter
Utility gauge for commercial and industrial markets. This pressure gauge has a 15 psi/bar scale with a 2 in. dial and 1/4 NPT connection. It has a steel case, brass internals and plastic lens.
- 2 in. dial 1/4 NPT
- Accuracy 3-2-3% of span, ASME B40.1 grade B
- 15 psi/bar scale with no logo
- Black steel case with brass connection
High quality, economical design for use in commercial and industrial boiler applications. Dual reading pressure and temperature instrument. This item has a 2 1/ 2 dial, 1/4 npt with 3.63" stem. The temperature range is 70/320F & 20/160C. The psi is 0/75 psi and 0/170 Ft of water reading.
- 2 1/2 dial with 1/4 npt and 3.63" stem
- Accuracy 3-2-3% full scale per Grade B, ASME B40.1
- Scale pressure: dual scale psi & ft of water column; temperature: dual scale F & C; temperature Range 70/320 degree F & 20/160 degree C
- Case black painted steel, dry non-fillable
Utility gauge for commercial and industrial markets. Black steel case, chrome bezel, copper alloy internals. 2 1/2 dial with 1/4 npt, dry only case.
- 2 1/2" dial size with standard 1/4 npt
- Black steel case with brass wetted parts
- Plastic lens
- Accuracy 3-2-3% of span, ASME B40.1 Grade B
Utility gauge for commercial and industrial markets. Black steel case with brass internals. This pressure gauge has a 300 psi/bar scale with a 2 in. dial and 1/4 NPT connection.
- 2 in. dial 1/4 NPT
- Accuracy 3-2-3% of span, ASME B40.1 grade B
- 300 psi/bar scale no logo
- Black steel case, chrome bezel, copper alloy internals
The Pumptrol FSG2J21M4CP electromechanical pressure switch by Square D is the most trusted brand in residential, commercial and industrial pumping applications. This switch has a 30 psi to 50 psi pressure setting range activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached. The NEMA 1 enclosure has a 1/4 in. NPSF internal fluid connection and screw clamp terminals. The switch works with a 1.5 HP or less pump. The adjustable differential range is 15 psi to 30 psi and the cut-out range is 20 psi to 65 psi. The low-pressure cut-off (auto-start-off) operates at approximately 10 psig below the cut-in and will turn off the pump. The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratory (UL) Listed and Canadian Standards Association (CSA) Certified. For over 75 years, Square D pressure switches continue to meet the needs of our customers. Square D Pumptrol pressure switches are manufactured by Schneider Electric.
- If system pressure is lost for any reason, a low water condition for example, the automatic lower pressure/water cut-off feature will open the contacts, turning off the pump
- Universally accepted and recognized design is easy to wire, features drift proof cut-in and cut-out settings and has visible vertical contacts which are easy to inspect
- Switch is UL listed and Canadian Standards Association (CSA) certified
- Activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached
- Pressure switch is RoHS compliant, NSF certified to meet federal low lead requirements
The adjust-angle thermometer model AS5 has a black Aluminum case with glass front exclude dirt and dust. Connection comes standard with a swivel nut 1-1/4 in. - 18 in. NEF thread. This item also comes with a brass thermowell that has a 3/4 NPT connection. The stem length is 3-1/2 in. and the temperature range is 30/240 degree F.
- Simple adjustment just 2 screws permit case to be rotated 180 degree and stem to be positioned in 10 degree increments allowing user to select the most desirable viewing position
- Easy readability lens front blue liquid filled thermometer tube is mounted on V-shaped aluminum scale with bold black lines and numerals
- Accurate calibrated against standards traceable to the national institute of standards and technology and guaranteed accurate to plus or minus 1 scale division
- Construction black molded ABS case with glass front to exclude dirt and dust is standard, aluminum case is optional at additional charge, plastic face is optional at additional charge, ABS case should not be subjected to temperatures greater than 200 degree F
The Pumptrol FSG2J21BP electromechanical pressure switch by Square D is the most trusted brand in residential, commercial and industrial pumping applications. The FSG2J21BP has a 30 psi to 50 psi pressure setting range activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached. The NEMA 1 enclosure has a 1/4 in. NPSF internal fluid connection and screw clamp terminals. The switch works with a 1.5 HP or less pump. The adjustable differential range is 15 psi to 30 psi and the cut-out range is 20 psi to 65 psi. The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratory (UL) Listed and Canadian Standards Association (CSA) Certified. For over 75 years, Square D pressure switches continue to meet the needs of our customers. Square D Pumptrol pressure switches are manufactured by Schneider Electric.The Square D by Schneider Electric Pressure Switch is compatible with jet pumps, submersible pumps and reciprocating pumps. The standard action contacts open on rising pressure.
- Suitable for jet pumps, submersible pumps and reciprocating pumps
- Standard-action contacts open on rising pressure
- 30 - 50 PSI
- 1/4 in. pressure connection
- Standard action contacts open on rising pressure
The adjust-angle thermometer model AS5 has a black Aluminum case with glass front to exclude dirt and dust. Connection comes standard with a swivel nut 1-1/4 in. - 18 in. NEF thread. This item also comes with a brass thermowell that has a 3/4 NPT connection. The steam length is 3-1/2 in. and the temperature range is 0/160 degree F.
- Simple adjustment just 2 screws permit case to be rotated 180 degree and stem to be positioned in 10 degree increments allowing user to select the most desirable viewing position
- Easy readability lens front blue liquid filled thermometer tube is mounted on V-shaped aluminum scale with bold black lines and numerals
- Accurate calibrated against standards traceable to the national institute of standards and technology and guaranteed accurate to plus or minus 1 scale division
- Construction black molded ABS case with glass front to exclude dirt and dust is standard, aluminum case is optional at additional charge, plastic face is optional at additional charge, ABS case should not be subjected to temperatures greater than 200 degree F
Red spirit filled economy thermometer for commercial and industrial applications. This thermometer has a 5 in. scale and 2/125 in. copper alloy stem. The temperature range is 40/280 degree F and 15/135 degree C.
- Scale size 5 in. (127 mm) white painted steel with black markings
- Accuracy +/-1 scale division
- Scale dual scale degree F and degree C temperature range 40/280 degree F and 15/135 degree C
- Well brass or steel - includes thermowell
Utility gauge for commercial and industrial markets. Black steel case, chrome bezel, copper alloy internals. This gauge has a 3 1/2 dial, 1/4 npt connection, 100 psi/bar scale.
- 3 1/2 dial, 1/4 npt connection
- 100 psi/bar scale with no logo
- Accuracy 3-2-3% of span, ASME B40.1 Grade B
- Black steel case, chrome bezel, copper alloy internals
The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.
- High quaility
- Reliability
- Durability
- Easy to install
Weiss Commercial Pressure Gauge, 4-1/2" stainless steel case gauge designed for heating, cooling and A/C applications lower stem mount in 1/4" NPT. Brass socket with phosphor bronze bourdon tubes ANSI grade 1A, ±1% full scale accuracy. Mfg #4CTS-100
- Pack of 1
- Weight of the product is 1.150 lbs
- Length of the product is 6.400 in
- Non Hazardous