The Pro Series Pump Alternator and Alarm System is ideal for those wishing to maintain 2 pumps in the same pit. The alternator lengthens the life of both pumps by alternating usage, running 1 pump at a time. If a pump or float fails, the system will alert with a visual and audible alarm that high water is present and let you know which pump is failing. The system will then allow the other pump and the second float to keep everything dry. In addition, it has a remote terminal allowing for connection to external devices, such as, one of the Pro Series Pumps CONNECT modules, a home security system, home automation system, or other device for remote notification. Now you can be in the know when you are on the go.

• Can be used in sump, sewage and effluent applications
• If 1 pump fails the other pump will take over and an audible alarm will sound
• Alerts to pump failure, high water and system operation
• Remote terminal allows the unit to connect to any Pro Series Pumps connect module, security system, home automation system or other device
• Vertical switches can be unplugged from the alternator for easy installation
• Angled receptacles to accept a standard or right-angled pump plugs
• 9-Volt battery back-up for "high water alarm" alarm
• Designed to run on a standard 15 Amp, 120-Volt circuit

The Pumptrol FSG2J21M4CP electromechanical pressure switch by Square D is the most trusted brand in residential, commercial and industrial pumping applications. This switch has a 30 psi to 50 psi pressure setting range activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached. The NEMA 1 enclosure has a 1/4 in. NPSF internal fluid connection and screw clamp terminals. The switch works with a 1.5 HP or less pump. The adjustable differential range is 15 psi to 30 psi and the cut-out range is 20 psi to 65 psi. The low-pressure cut-off (auto-start-off) operates at approximately 10 psig below the cut-in and will turn off the pump. The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratory (UL) Listed and Canadian Standards Association (CSA) Certified. For over 75 years, Square D pressure switches continue to meet the needs of our customers. Square D Pumptrol pressure switches are manufactured by Schneider Electric.

• If system pressure is lost for any reason, a low water condition for example, the automatic lower pressure/water cut-off feature will open the contacts, turning off the pump
• Universally accepted and recognized design is easy to wire, features drift proof cut-in and cut-out settings and has visible vertical contacts which are easy to inspect
• Switch is UL listed and Canadian Standards Association (CSA) certified
• Activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached
• Pressure switch is RoHS compliant, NSF certified to meet federal low lead requirements

The sump pump check valve is installed in the discharge pipe in sump pump applications. The internal check valve keeps pump fluid from flowing back into the sump basin. Includes Stainless Steel hose clamps.

• Full port valve design
• Flapper is seated on a 15 degree angle to reduce water hammer when pump is shut off
• Design of the flapper prevents debris from building up or getting caught which ensures proper seating
• Made of durable ABS
• Maximum temperature 140 degree F (60 degree C)

With no monthly or yearly fees, the Pro Series Pumps WiFi Module sends e-mail, text and status alerts to your phone, tablet or computer to alert you to potential problems or required maintenance. The Wifi Module easily connects to compatible Pro Series systems using the data port or dry contacts. Sends e-mail, text and status alerts to your phone, tablet or computer. No monthly or yearly fees or subscriptions

• Easily connect to compatible Pro Series systems using the data port or dry contacts.
• USB data port allows you to receive text or email alerts telling you exactly what is going on with your sump pump system using your home Wi-Fi signal or automation hub
• Remote notification terminal allows you to receive general alerts while away from home; the remote terminal allows for one of many external devices to be connected including a home security system, auto dialer or other dry contact based device
• Pro Series Pumps Wi-Fi module give you the flexibility not found with other brands
• Free Apple and Android App available
• No monthly fee

The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.

• High quality
• Reliable performance
• Durability
• Easy to install

Pressure switches are used to control electrically driven water pumps, suitable for all types of pumps: jets, submersible, reciprocating, etc. Pressure switches are needed for rural water systems that rely on wells to supply their water. Water is pumped from the well or other water source to the pressure tank and as the tank fills the air in the tank becomes pressurized. When the pre-set pressure is reached, the pressure switch contacts open to stop the pump. When water is used, the pressure on the pressure tank falls and as it reaches the pre-set cut in pressure of the switch the contacts close, starting the cycle over. These pressure switches are easily adjusted by following instruction inside the switch cover.

• Standard duty
• NEMA type 1 indoor enclosure
• 2 pole, rated 1-1/2 HP at 115 Vac, 2HP at 230 Vac
• Pressure connection: 1/4 in. NPSF, pressure setting 40-60
• Adjustable cut in/out: cut out range 20-65 psig

The Pumptrol FSG2J21BP electromechanical pressure switch by Square D is the most trusted brand in residential, commercial and industrial pumping applications. The FSG2J21BP has a 30 psi to 50 psi pressure setting range activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached. The NEMA 1 enclosure has a 1/4 in. NPSF internal fluid connection and screw clamp terminals. The switch works with a 1.5 HP or less pump. The adjustable differential range is 15 psi to 30 psi and the cut-out range is 20 psi to 65 psi. The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratory (UL) Listed and Canadian Standards Association (CSA) Certified. For over 75 years, Square D pressure switches continue to meet the needs of our customers. Square D Pumptrol pressure switches are manufactured by Schneider Electric.The Square D by Schneider Electric Pressure Switch is compatible with jet pumps, submersible pumps and reciprocating pumps. The standard action contacts open on rising pressure.

• Suitable for jet pumps, submersible pumps and reciprocating pumps
• Standard-action contacts open on rising pressure
• 30 - 50 PSI
• 1/4 in. pressure connection
• Standard action contacts open on rising pressure

This deep well air volume control prevents tanks from becoming air bound by maintaining proper air volume. Float operation open the air valve on water level drop (increase in tank air) and permits air to bleed from the tank to the atmosphere as the tank refills. Has a durable plastic housing with sealed plastic float, stainless steel rod and hardware.

• Deep well air volume control
• 1-1/4 in. MPT tank connection
• Durable plastic housing with sealed plastic float, stainless steel rod and hardware
• Housing is tapped with a 1/4 in. FPT pressure gauge port

The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.

• High tensile serrated arms
• Machined flange for support against tank wall
• Replaceable seals
• Dual inlet thread for connecting pipe, locknut

The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.

• High quality
• Reliability
• Durability
• Attractive styling

A Reliance Pump Tank is a must for any home that uses a pump to draw water from a well. We utilize a parabolic (cone-shaped) diaphragm that eliminates rubbing against itself or the tank wall, causing premature failure. A properly sized pump and pump tank will work as a team to meet your needs and deliver many years of dependable service.

• It ensures that your pump will run for at least one minute each time it cycles, as required by pump manufacturers
• It stores a supplemental water supply between pump cycles, to reduce the number of cycles throughout the day, and helps prolong pump life
• It helps maintain water pressure within your system, ensuring proper operation of your dishwasher and washing machine, and robust flow for showering and bathing
• Strong, flexible butyl diaphragm, powder-coated inner shell for permanent separation of air and water

Leonard Lvc Thermostatic Assembly Less Cover & Pointer

• Includes all necessary hardware for hassle-free installation
• Sturdy stainless steel build ensures durability
• Brass finish adds an attractive aesthetic appeal
• Restores system to efficient performance

• Maintenance free - no need to add battery fluid or distilled water
• Compatible with all new PHCC Pro Series backup products
• Up to 50 hours of protection (based on a 10% duty cycle) on the PS-C33 combination and PHCC-2400 battery backup sump pump system
• Up to 60 hours of protection (based on a 10% duty cycle) on the PS-C22 combination and PHCC-1730 battery backup sump pump system
• Up to 100 hours of protection (based on a 10% duty cycle) on the PS-C11 combination and PHCC-1000 battery backup sump pump system
• Runs pump intermittently for days

Holds prime for jet well pumps and irrigation pumps. Heavy perforated solid brass strainer. Features include perforated steel screen strainer, poppet with Buna-N O-ring, stem guide and wide channel for maximum flow.

• Spring loaded
• 2 years warranty against defect
• Used with jet pumps
• Female NPT threads

Utility gauge for commercial and industrial markets. This pressure gauge has a 15 psi/bar scale with a 2 in. dial and 1/4 NPT connection. It has a steel case, brass internals and plastic lens.

• 2 in. dial 1/4 NPT
• Accuracy 3-2-3% of span, ASME B40.1 grade B
• 15 psi/bar scale with no logo
• Black steel case with brass connection

The Zoeller 10-0032 Variable Level Float Switch is Normally Open (NO) and rated at 15 Amp with 115-Volt AC power supply. The switch plugs into the wall outlet and the pump lugs into the switch. The item has a 15 in. cord length.

• 115-Volt AC power
• 15 Amp rated
• 15 in. cord length
• Piggyback design

Red spirit filled economy thermometer for commercial and industrial applications. This thermometer has a 5 in. scale and 2/125 in. copper alloy stem. The temperature range is 40/280 degree F and 15/135 degree C.

• Scale size 5 in. (127 mm) white painted steel with black markings
• Accuracy +/-1 scale division
• Scale dual scale degree F and degree C temperature range 40/280 degree F and 15/135 degree C
• Well brass or steel - includes thermowell

Pressure Switches are used to control electrically driven water pumps, suitable for all types of pumps: jets, submersible, reciprocating, etc. Pressure switches are needed for rural water systems that rely on wells to supply their water. Water is pumped from the well or other water source to the pressure tank and as the tank fills the air in the tank becomes pressurized. When the pre-set pressure is reached, the pressure switch contacts open to stop the pump. When water is used, the pressure in the pressure tank falls and as it reaches the pre-set cut in pressure of the switch the contacts close, starting the cycle over. These pressure switches are easily adjusted by following instruction inside the switch cover.

• Standard duty
• NEMA type 1 indoor enclosure
• 2 pole, rated 1-1/2 HP at 115 Vac, 2HP at 230 Vac
• Pressure connection: 1/4 in. NPSF, pressure setting 20-40
• Adjustable cut in/out: cut out range 20-65 psig

Utility gauge for commercial and industrial markets. Black steel case, chrome bezel, copper alloy internals. 2 1/2 dial with 1/4 npt, dry only case.

• 2 1/2" dial size with standard 1/4 npt
• Black steel case with brass wetted parts
• Plastic lens
• Accuracy 3-2-3% of span, ASME B40.1 Grade B

The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.

• High quality
• Reliability
• Durability
• Attractive styling

Would you like to know if water gets too high in your sump or sewage pit? Is it code in your area to have a high water alarm on your sump or sewage pit? If so, the PS-WS is an accessory for The Pro Series Deluxe Float Controller (DFC2, VSC2, TSC2) that will activate a warning light, an audible alarm, send a signal to the remote terminal, and send information through the USB port when water reaches the sensor (allowing for text, email and in app notifications using the PS-WiFi). It simply attaches to the discharge pipe with included mounting hardware and the 10 foot cord plugs in at the bottom of the Deluxe controller. Between the visual light, audible alarm and optional text or email notifications (when using the PS-WiFi) you can be In the know when you are on the go.

• Will activate a warning light, an audible alarm, send a signal to the remote terminal, and send information through the USB port when water reaches the sensor
• For use with the pro series deluxe float controller (DFC2, VSC2, TSC2) or pro series water alarm (PWA2)
• Easily attaches to the discharge pipe with included mounting hardware
• 10 ft. cord with plug

The Zoeller 10-4012 High Level alarm is for use in sump and sewage applications. It uses 115-Volt AC power and also has battery back up power using (2) AA batteries. It comes with a tethered float switch.

• 115-Volt AC power
• Battery back up power using AA batteries
• For use in sump or sewage applications
• Tethered float switch included

High quality, economical design for use in commercial and industrial boiler applications. Dual reading pressure and temperature instrument. This item has a 2 1/ 2 dial, 1/4 npt with 3.63" stem. The temperature range is 70/320F & 20/160C. The psi is 0/75 psi and 0/170 Ft of water reading.

• 2 1/2 dial with 1/4 npt and 3.63" stem
• Accuracy 3-2-3% full scale per Grade B, ASME B40.1
• Scale pressure: dual scale psi & ft of water column; temperature: dual scale F & C; temperature Range 70/320 degree F & 20/160 degree C
• Case black painted steel, dry non-fillable

• Stainless Steel
• 1/4" X 20 Thread