The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.

• High quality
• Replace old and worn parts
• No special tools needed
• Easy to install

The product is well made with good surface treatment. The product is easy to use and attractive styling. It's easy to handle and install. The product is wide selection of product choices and great value.

• Easy to install with little tools required
• Competitively priced
• High quality
• Reliability

Pro Series Pumps High Water Alarm is designed to minimize the risk of water damage by acting as an early warning system. For over two decades the Pro Series Pumps High Water Alarm has been protecting from unwanted water damage. It can be placed next to a water heater, beneath a laundry tub, under a sink, behind a refrigerator, next to the air conditioner, anywhere where water or moisture can collect. All it takes is 1/32 in. of water to sound a loud 110 dB alarm, detecting water before mold can grow, or alerting you to potential flood conditions. It includes 6 ft of wire for extending the sensor too hard to reach locations. You can even increase the wire length up to 100 ft. The built in accessory jack allows for additional sensors or a high-water float.

• Battery operated alarm can detect as little as 1/32 in. of water
• Produces a loud 110 dB alarm that can be heard throughout the house to provide an effective early warning system
• Use in a variety of locations: in a sump pit, near water heaters, refrigerators or dishwashers, next to washing machines, under sinks, close to air conditioner drain tubes or wherever there is a risk of water damage
• Sensor wire extends 6 ft. and can be lengthened for hard to reach areas, accommodates the addition of more than 100 ft. of wire (additional 24-Gauge wire not included)
• Built in accessory jack allows for an additional 360 degree water sensor PS-WS360 or a high water float PS-WS (Item 3570418)
• Battery-saver feature only uses energy when the alarm is sounding to offer a long battery life
• Requires 9-Volt battery (not included)
• 5 Year limited warranty

This air valve provides a method of injecting and holding air pressure in water systems. Other uses include pressurizing piping systems for pressure test and blowing out irrigation lines. It is a general purpose valve.

• General purpose - 1/4 in. MPT tank valve
• Working pressure 0-200 psi
• Working temperature -40 degree F to +225 degree F
• Opening pressure 60 psi
• Lead free

Utility water test gauge. This gauge is used for pressure tests of residential and commercial water lines. This gauge has a 300 psi scale and a 3/4 in. female swivel connection for water lines.

• 3/4 in. female copper alloy swivel connection for water lines
• Top mounted to make it easy to read when connected
• Accuracy 3-2-3% of span, ASME B40.1 grade B
• 2-1/2 in. dial and 300 psi standard

Detectable 5 mil Underground Marking Tape, 3" x 1000' GAS

• Aluminum foil alerts about buried installation below
• Designed to identify, protect, and locate buried lines
• Black letters and colored background for clear visibility
• Designed for open trench applications

Pro Series Standby Sump Pump Batteries are the best batteries for your backup sump pump because they are designed around the system. They are uniquely constructed with heavy duty plates to store more energy, provide longer run times and last longer in standby operation. The Pro Series B12-100 will provide years of dependable service without the hassle of having to add battery fluid or distilled water. The Pro Series B12-100 battery is compatible with all current Pro Series Pumps' backup and combination sump pump systems. The high storage capacity of the B12-100 battery can run any of the current Pro Series battery backup or combination sump pump systems intermittently for days.

• Maintenance free - no need to add battery fluid or distilled water
• Runs the pump longer for more hours per charge, intermittently for days and lasts longer in standby operation
• Compatible with all new Pro Series Pumps backup and combination sump pump systems
• Up to 55 hours of protection (based on a 10% duty cycle) on the PS-C33 combination and PHCC-2400 battery backup sump pump system
• Up to 70 hours of protection (based on a 10% duty cycle) on the PS-C22 combination and PHCC-1850 battery backup sump pump system
• Up to 110 hours of protection (based on a 10% duty cycle) on the PS-C11 combination and PHCC-1000 battery backup sump pump system
• Internally threaded terminals for easy installation
• Compatible with PS-C33 Item # 110613; PHCC-2400 Item # 110610; PS-C22 Item # 110612; PHCC-1850 Item # 110609;

Pressure switches are used to control electrically driven water pumps, suitable for all types of pumps: jets, submersible, reciprocating, etc. Pressure switches are needed for rural water systems that rely on wells to supply their water. Water is pumped from the well or other water source to the pressure tank and as the tank fills the air in the tank becomes pressurized. When the pre-set pressure is reached, the pressure switch contacts open to stop the pump. When water is used, the pressure on the pressure tank falls and as it reaches the pre-set cut in pressure of the switch the contacts close, starting the cycle over. These pressure switches are easily adjusted by following instruction inside the switch cover.

• Standard duty
• NEMA type 1 indoor enclosure
• 2 pole, rated 1-1/2 HP at 115 Vac, 2HP at 230 Vac
• Pressure connection: 1/4 in. NPSF, pressure setting 40-60
• Adjustable cut in/out: cut out range 20-65 psig

We all know the old adage 'time is money'. The Pro Series Pumps' Quick Connect Main Pipe is a sump pump installation time saver. It is a pre-assembled discharge pipe that will make your sump pump installation quick and easy. No need to remove the pipe from the old pump. Save time from having to cut, drill, prime and glue the PVC pipe. Also, save on the cost of adapters, PVC, primer and cement. The Quick Connect Main Pipe will save you time and money.

• Makes sump pump replacement and installation easy
• No need to remove the pipe from the old pump
• Save time from having to cut, drill, prime and glue PVC pipe
• Save on cost of adapters, PVC, primer and cement
• Total length: 14.25 in.
• Pre-assembled with: 1-1/2 in. rubber coupling, 1-1/2 in. check valve, 1-1/2 in. NPT female adapter, pre-drilled weep hole, 1-1/2 in. discharge pipe and a 1-1/2 in. NPT threaded male adapter

The sump pump check valve is installed in the discharge pipe in sump pump applications. The internal check valve keeps pump fluid from flowing back into the sump basin. Includes Stainless Steel hose clamps.

• Full port valve design
• Flapper is seated on a 15 degree angle to reduce water hammer when pump is shut off
• Design of the flapper prevents debris from building up or getting caught which ensures proper seating
• Made of durable ABS
• Maximum temperature 140 degree F (60 degree C)

Utility gauge for commercial and industrial markets. Black steel case, chrome bezel, copper alloy internals. 2 in. dial with 1/4 NPT, dry only case.

• 2 in. dial size with standard 1/4 NPT
• Black steel case with brass wetted parts
• Glass lens
• Accuracy 3-2-3% of span, ASME B40.1 grade B

Utility gauge for commercial and industrial markets. Black steel case, chrome bezel, copper alloy internals. This gauge has a 2 dial, 1/4 NPT, 100 psi/bar scale.

• 2 in. dial 1/4 NPT
• Accuracy 3-2-3% of span, ASME B40.1 grade B
• 100 psi/bar scale with no logo
• Black steel case with brass wetted parts

A Reliance Pump Tank is a must for any home that uses a pump to draw water from a well. We utilize a parabolic (cone-shaped) diaphragm that eliminates rubbing against itself or the tank wall, causing premature failure. A properly sized pump and pump tank will work as a team to meet your needs and deliver many years of dependable service.

• It ensures that your pump will run for at least one minute each time it cycles, as required by pump manufacturers
• It stores a supplemental water supply between pump cycles, to reduce the number of cycles throughout the day, and helps prolong pump life
• It helps maintain water pressure within your system, ensuring proper operation of your dishwasher and washing machine, and robust flow for showering and bathing
• Strong, flexible butyl diaphragm, powder-coated inner shell for permanent separation of air and water

The Pro Series Pumps Deluxe Dual Float Controller (DFC2) is a premium product. It has a cage that protects the 2 micro reed switches. The second float acts as a fail-safe, providing redundancy. The dual float simply mounts to the discharge pipe, at the activation height of your choosing, with the included stainless steel hose clamp and is a piggy-back switch making it compatible with most sump pumps. For easy installation the float switch can be unplugged from the controller, the run time is adjustable (after the float drops), and the controller has universal mounting tabs. For superior user functionality, the DFC2 exercises the sump pump weekly to extend pump life and has a system operating light to display that the control box is operating properly. It also monitors pump and power conditions, sounds an alarm when problems are detected, and gives a visual light that pinpoints the remedy. Plus, it has a USB Data Port and Remote Terminal to connect to external devices, such as, one of the Pro Series Pumps Connect modules, a home automation system, or other device for remote notification.

• 2 float switches for added protection and redundancy
• Primary float switch activates the pump when water reaches the float
• Secondary float acts as a fail-safe for the first
• Sounds an alarm and alerts when power has failed, a pump or float problem is detected or the battery is low
• USB data port and remote terminal connect to external devices such as the PHCC Pro Series Pumps connect modules, home automation systems or other devices for remote notification
• Exercises the pump weekly to extend pump life
• Adjustable run time (after the float drops) from 5-45 seconds
• Adjustable to any activation height using included stainless steel hose clamp
• Float switch can be unplugged from controller for easy installation
• Optional high water accessory available (PS-WS)
• Warranty matches the Pro Series pump it is purchased with, otherwise a 1-year warranty applies

Utility gauge for commercial and industrial markets. Black steel case, chrome bezel, copper alloy internals. This gauge has a 2 1/2 dial, 1/4 npt, 100 psi/bar scale.

• 2 12/ dial, 1/4 npt connection
• 100 psi/bar scale with no logo
• Accuracy 3-2-3% of span, ASME B40.1 Grade B
• Black steel case, brass internals, dry only case.

• Lead Free
• 1/4" MNPT
• 2" Face

Utility gauge for commercial and industrial markets. This pressure gauge has a 60 psi/bar scale and dry only. The dial size is 2 in. with a 1/4 NPT connection.

• 2 in. dial 1/4 NPT connection
• Accuracy 3-2-3% of span, ASME B40.1 grade B
• 60 psi/bar scale with no logo
• Black steel case with brass internals

This air valve provides a method of injecting and holding air pressure in water systems. It is used for shallow and deep well pump systems. Other uses include pressurizing piping systems for pressure test and blowing out irrigation lines.

• 1/8 in. MPT for water pumps
• Working pressure 15-150 PSI
• Working temperature: -10 degree F to + 165 degree F
• Opening pressure 3 psi
• Manufactured with light spring required for shallow well pump and bleeder systems

The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.

• High tensile serrated arms
• Machined flange for support against tank wall
• Replaceable seals
• Dual inlet thread for connecting pipe, locknut

A Reliance Pump Tank is a must for any home that uses a pump to draw water from a well. We utilize a parabolic (cone-shaped) diaphragm that eliminates rubbing against itself or the tank wall, causing premature failure. A properly sized pump and pump tank will work as a team to meet your needs and deliver many years of dependable service.

• It ensures that your pump will run for at least one minute each time it cycles, as required by pump manufacturers
• It stores a supplemental water supply between pump cycles, to reduce the number of cycles throughout the day, and helps prolong pump life
• It helps maintain water pressure within your system, ensuring proper operation of your dishwasher and washing machine, and robust flow for showering and bathing
• Strong, flexible butyl diaphragm, powder-coated inner shell for permanent separation of air and water

Pressure Switches are used to control electrically driven water pumps, suitable for all types of pumps: jets, submersible, reciprocating, etc. Pressure switches are needed for rural water systems that rely on wells to supply their water. Water is pumped from the well or other water source to the pressure tank and as the tank fills the air in the tank becomes pressurized. When the pre-set pressure is reached, the pressure switch contacts open to stop the pump. When water is used, the pressure in the pressure tank falls and as it reaches the pre-set cut in pressure of the switch the contacts close, starting the cycle over. These pressure switches are easily adjusted by following instruction inside the switch cover.

• Standard duty
• NEMA type 1 indoor enclosure
• 2 pole, rated 1-1/2 HP at 115 Vac, 2HP at 230 Vac
• Pressure connection: 1/4 in. NPSF, pressure setting 20-40
• Adjustable cut in/out: cut out range 20-65 psig

Pressure switches are used to control electrically driven water pumps, suitable for all types of pumps; jets, submersible, reciprocating, etc. Pressure switches are needed for rural water systems that rely on well to supply their water. Water is pumped from the well or other water source to the pressure tank and as the tank fills the air in the tank becomes pressurized. When the pre-set pressure is reached, the pressure switch contacts open to stop the pump. When water is used, the pressure in the pressure tank fall and as it reached the pre-set cut in pressure of the switch the contacts close, starting the cycle over. These pressure switches are easily adjusted by following instruction inside the switch cover.

• Standard duty
• NEMA type 1 indoor enclosure
• 2 pole, rated 1-1/2 HP at 115 Vac, 2HP at 230 VAC
• Pressure Connection: 1/4 in. NPSF, pressure setting 30-50
• Adjustable cut in/out: cut out range 20-65 psig

Utility gauge for commercial and industrial markets. Black steel case, chrome bezel, copper alloy internals. 2 in. Dial 1/4 NPT 30 psi/bar.

• 2 in. dial 1/4 NPT 30 psi
• Accuracy 3-2-3% of span, ASME B40.1 grade B
• 30 psi/bar scale no logo
• Black steel case, chrome bezel, copper alloy inter

Leonard Control Rod Group Pam-11 Pv-Cr

• Bronze build provides durability
• Ideal for repairing PAM-II-ST old style thermostatic valve
• Resists corrosion to ensure safety and reliability
• Restores system to efficient performance