Submersible Sump Pumps
The Cast Iron Sump Pump (CIS-33V) is a 1/3 HP all Cast Iron sump/effluent pump with a built-in vertical switch. It is designed with commercial grade materials to be an everyday pump for the professional contractor. It is built for consistent performance using a cool running, energy efficient permanent split capacitor (PSC) motor, with upper and lower sealed ball bearings giving extreme efficiency, high capacity, and quiet operation. The Cast Iron Sump Pump has a Cast Iron vortex impeller which can pass 1/2 in. solids. It pushes 3200 GPH at 10 feet while only pulling 5 Amps. Saving on the electric bill. It is thermally protected, has Stainless Steel fasteners, built-in air relief valve, and a carbon-ceramic shaft seal with a Buna-N-Seal for long life and proven reliability. Its integral vertical switch is compact, dependable and adjustable. If you are looking for an everyday pump, The Cast Iron Sump Pump is as tough as they come.
- 4,000 GPH (67 GPM) at 0 ft. lift; 3,200 GPH (53 GPM) at 10 ft. lift
- 1/3 HP pump with energy efficient permanent split capacitor (PSC) motor
- All Cast Iron construction
- Premium pump construction includes: upper and lower sealed ball bearings for ultra-quiet operation, stainless steel fasteners for long life, carbon / ceramic seals plus 1 Buna-N-Seal, thermal protection and 1-1/2 in. discharge
- Cast iron vortex impeller can pass 1/2 in. solids
- Removable strainer
- Built-in air relief valve to help prevent air lock
- 10 ft. power cord
- 3 Year limited warranty
The S3033-NS 1/3 HP Cast Iron / Stainless Steel Sump Pump is built with premium components for the professional contractor who wants the best. It is designed for peak performance using a water cooled, energy efficient permanent split capacitor (PSC) motor, with upper and lower sealed ball bearings giving extreme efficiency, high capacity, and ultra-quiet operation. It pushes a whopping 3000 GPH (50 GPM) at 10 ft. while only pulling 4 Amp, saving on the electric bill. It is thermally protected, has stainless steel fasteners, and dual carbon-ceramic shaft seals with a Buna-N-Seal for long life and proven reliability.
- 3,900 GPH (65 GPM) at 0 ft. lift; 3,000 GPH (50 GPM) at 10 ft. lift
- 1/3 HP, 4.0 Amp energy efficient permanent split capacitor (PSC) motor
- Heavy-duty cast iron / stainless steel construction
- S3033-NS is pump only, no switch included; see below for recommended options
- Carbon / ceramic seals plus 1 Buna-N-Seal to protect the motor
- Upper and lower ball bearings for increased efficiency and ultra-quiet operation
- Water cooled (no cooling oil) thermally protected PSC motor
- 1-1/2 in. discharge
- 10 ft. grounded power cord
- Recommended sump dual float options: DFC2 (best), item # 110607; DFC1.5 (better), item # 3553971; DFC1 (good), item # 134658
- Recommended sump vertical switch options: VSC2 (best), Item # 3553973; VSC1.5 (better) - item # 3553972; VS (good) - item # 134659
- 5-year limited warranty when purchased from and installed by a contractor, otherwise 3-year warranty
The Cast Iron Sump Pump (CIS-50V) is a 1/2 HP all Cast Iron sump/effluent pump with a built-in vertical switch. It is designed with commercial grade materials to be an everyday pump for the professional contractor. It is built for consistent performance using a cool running, energy efficient permanent split capacitor (PSC) motor, with upper and lower sealed ball bearings giving extreme efficiency, high capacity, and quiet operation. The Cast Iron Sump Pump has a Cast Iron vortex impeller which can pass 1/2 in. solids. It pushes 3840 GPH at 10 ft. while only pulling 5.5 Amps saving on the electric bill. It is thermally protected, has Stainless Steel fasteners, built-in air relief valve, and a carbon-ceramic shaft seal with a Buna-N-Seal for long life and proven reliability. Its integral vertical switch is compact, dependable and adjustable. If you are looking for an everyday pump, The Cast Iron Sump Pump is as tough as they come.
- 4,300 GPH (71 GPM) at 0 ft. lift; 3,840 GPH (64 GPM) at 10 ft. lift
- 1/2 HP pump with energy efficient permanent split capacitor (PSC) motor
- All cast iron construction
- Premium pump construction includes: upper and lower sealed ball bearings for ultra-quiet operation, stainless steel fasteners for long life, carbon/ceramic seals plus 1 Buna-N-Seal, thermal protection and 1-1/2 in. discharge
- Cast iron vortex impeller can pass 1/2 in. solids
- Removable strainer
- Built-in air relief valve to help prevent air lock
- 10 ft. power cord
- 3 Year limited warranty
The S3050-NS 1/2 HP Cast Iron / Stainless Steel Sump Pump is built with premium components for the professional contractor who wants the best. It is designed for peak performance using a water cooled, energy efficient permanent split capacitor (PSC) motor, with upper and lower sealed ball bearings giving extreme efficiency, high capacity, and ultra-quiet operation. It pushes a whopping 3900 GPH (65 GPM) at 10 ft. while only pulling 4.3 Amp, saving on the electric bill. It is thermally protected, has stainless steel fasteners, and dual carbon-ceramic shaft seals with a Buna-N-Seal for long life and proven reliability.
- 4,380 GPH (73 GPM) at 0 ft lift; 3,900 GPH (65 GPM) at 10 ft. lift
- 1/2 HP, 4.3 Amp energy efficient permanent split capacitor (PSC) motor
- Heavy-duty cast iron / stainless steel construction
- S3050-NS is pump only, no switch included; see below for recommended options
- Carbon / ceramic seals plus 1 Buna-N-Seal to protect the motor
- Upper and lower ball bearings for increased efficiency and ultra-quiet operation
- Water cooled (no cooling oil) thermally protected PSC motor
- 2 in. discharge for maximum output
- 20 ft. grounded power cord
- Recommended sump dual float options: DFC2 (best), item # 110607; DFC1.5 (better), item # 3553971; DFC1 (good), item # 134658
- Recommended sump vertical switch options: VSC2 (best), item # 3553973; VSC1.5 (better) - item # 3553972; VS (good) - item # 134659
- 5-year limited warranty when purchased from and installed by a contractor, otherwise 3-year warranty
The S2033-NS 1/3 HP All Cast Iron Sump / Effluent Pump is built with premium construction and engineered to be a workhorse for the professional contractor. It is designed for peak performance using a cool running, energy efficient permanent split capacitor (PSC) motor, with upper and lower sealed ball bearings giving extreme efficiency, high capacity, and ultra-quiet operation. It has a cast iron vortex impeller which can pass 1/2 in. solids. The S2033 sump / effluent pump pushes a massive 3200 GPH at 10 ft. while only pulling 5.0 Amps saving on the electric bill. It is thermally protected, has stainless steel fasteners, and a carbon-ceramic shaft seal with a Buna-N-Seal for long life and proven reliability. You can feel safe that The Pro Series Is Pumping For You.
- 4,000 GPH (67 GPM) at 0 ft. lift; 3,200 GPH (53 GPM) at 10 ft. lift
- Heavy duty all cast iron sump / effluent pump
- 1/3 HP Energy efficient permanent split capacitor (PSC) motor
- S2033-NS is pump only, no switch included; See below for recommended options
- Carbon / ceramic seals plus 1 Buna-N-Seal to protect the motor
- Upper and lower ball bearings for increased efficiency and ultra-quiet operation
- Thermally protected PSC motor
- Cast iron vortex impeller can pass 1/2 in. solids
- 1-1/2 in. Discharge
- Built in air relief hole to help prevent air lock
- 10 ft. Grounded power cord
- Recommended Sump Dual Float Options: DFC2 (best), Item # 110607; DFC1.5 (Better), Item # 3553971; DFC1 (Good), Item # 134658
- Recommended Sump Vertical Switch Options: VSC2 (Best), Item # 3553973; VSC1.5 (Better) - Item # 3553972; VS (Good) - Item # 134659
- 4 Year limited warranty when purchased from and installed by a contractor, otherwise 3 year warranty
Rugged cast iron pump body and motor cover, exterior hardware stainless steel construction. Tethered float switch. Piggy-back style float for automatic or manual operation. Oil-filled motor with automatic reset overload provides safe operation. Ball-bearing construction for long life. CSA listed. 10 ft. power cord. Shut-off head: 32 ft. Discharge: 1-1/2 in. NPT.
- Rugged cast iron pump body and motor cover, exterior hardware stainless steel construction
- Piggyback-style float for automatic or manual operation
- Oil-filled motor with automatic reset overload provides safe operation
- Ball-bearing construction for long life
Zinc and cast iron construction designed for maintenance-free operation. Dual ball-bearing motor and additional lip seal provide durability and longer pump life. Vertical float switch. Piggy-back style float for automatic or manual operation. Oil filled PSC motor for maximum heat dissipation, continuous bearing lubrication. Thermal overload protection with automatic reset. CSA listed. 8 ft. power cord. Shut-off head: 25 ft. Discharge: 1-1/2 in. NPT.
- Designed for drain water removal or permanent applications with small amounts of debris
- Vertical mechanical switch for 10 in. or larger sump basins
- Durable PSC motor for years of service
- Dual ball-bearing motor and additional lip seal
JB® 6 CFM Eliminator Vacuum Pump. 2-Stage Direct Drive To Achieve Deep 25 Micron Vacuum. 0.5 Hp Motor. Brass Fittings. 0.25 X 0.38" Intake Ports (Male Flare). Check Valve Prevents Oil Backflow During Power Failure. O-Ring Seal Drain Valve. 2-Year Warranty. Large, Easy To See Sight Glass Ensures Proper Oil Level. Oil Fill Is Isolated On Cover For Easy Fill. Increased Spacing Between Intake Tee And Handle For More Room. Larger 0.5" Handle Now More Ergonomic. Tethered Safety Cap Prevents Oil Spills During Transport. Heavy-Duty Chrome Plating. Increased Oil Capacity For Cooler Running Temperature And Reduced Contamination. Mfg #DV-6E
- 2-Stage Direct Drive To Achieve Deep 25 Micron Vacuum
- 0.5 Hp Motor
- Brass Fittings
- 0.25 X 0.38" Intake Ports (Male Flare)
This Professional Grade DUAL SUCTION Stainless Steel 1/3 HP RIDGID Pump is assembled in the USA and tested to 1 Million Cycles for performance that lasts. The 330RSDS will deliver dependable, energy-efficient, ultra-quiet performance for years to come - warrantied for 5 years. Able to pump up to 4,320 GPH. It is The Hardest Working Pump You'll Never Hear!
- Easy to install, start-to-finish in about 15 minutes
- Stainless steel housing construction with cast iron base for extended pump life
- High performance, energy efficient motor runs virtually silent
- Float guard protects float and switch for dependable operation
- Dual suction design removes debris and resists air lock
- Passes up to 1/2 in. solids
- 1-1/2 in. national pipe thread discharge complies to building codes
Rugged cast iron pump body and motor cover, exterior hardware stainless steel construction. 115-Volt oil filled motor with automatic reset overload provides safe operation. 10 ft. power cord. Vertical automatic switch. 1-1/2 in. discharge. 32 ft. shut-off. 62 GPM discharge.
- Piggyback-style float for automatic or manual operation
- Oil-filled motor with automatic reset overload provides safe operation
- Ball-bearing construction for long life
- Easily replaceable power cord with optional lengths available
Rugged cast iron pump body and motor cover, exterior hardware stainless steel construction. 1-1/2 in. NPT discharge. Carbon/ceramic shaft seal. Piggyback-style float for automatic or manual operation. 10ft. power cord. Vertical float switch. Oil-filled motor with automatic reset overload provides safe operation. 62 GPM. Handles up to 1/2 in. solids. On level 6-1/2 in., off level 2 in. of water.
- Rugged cast iron pump body and motor cover, exterior hardware stainless steel construction
- Carbon/ceramic shaft seal
- Oil-filled motor with automatic reset overload provides safe operation
- Ball-bearing construction for long life
The ST Series 1/3 HP Cast Iron / Cast Aluminum Sump Pump is built with premium components for the professional contractor. It is designed with an energy efficient permanent split capacitor (PSC) motor, upper and lower sealed ball bearings for extreme efficiency, high capacity and ultra-quiet operation. It pumps 2,770 GPH (46 GPM) at 10 feet while only pulling 3.8 Amps saving on the electric bill. It is thermally protected, has stainless steel fasteners, and dual carbon-ceramic shaft seals for long life.
- 2,770 GPH (46 GPM) at 10 ft. lift
- Cast iron / cast aluminum construction
- 1/3 HP Energy efficient permanent split capacitor (PSC) motor
- ST1033-NS is pump only, no switch included; See below for recommended options
- Carbon / ceramic seals plus 1 Buna-N-Seal to protect the motor
- Upper and lower ball bearings for increased efficiency and ultra-quiet operation
- Water cooled (no cooling oil) thermally protected PSC motor
- 1.5 in. Discharge
- 10 ft. Grounded power cord
- Recommended Sump Dual Float Options: DFC2 (best), Item # 110607; DFC1.5 (Better), Item # 3553971; DFC1 (Good), Item # 134658
- Recommended Sump Vertical Switch Options: VSC2 (Best), Item # 3553973; VSC1.5 (Better) - Item # 3553972; VS (Good) - Item # 134659
- 3 Year limited warranty when purchased from and installed by a contractor, otherwise 18 month warranty
The K2 1/4 HP Submersible Sump Pump is designed for home sump applications. The pump has an epoxy-coated aluminum motor housing and thermoplastic base for maximum corrosion resistance. The pump includes a direct-in vertical float switch for reliable and maintenance-free operation and fits into a 10 in. diameter sump basin or larger.
- Top suction design filters debris, minimizes clogging, and reduces airlock
- 1-1/2 in. or 1-1/4 in. (adapter included) NPT discharge for easy installation
- Energy-efficient PSC motor with automatic reset thermal overload protection reduces operating cost
- Epoxy-coated aluminum motor housing dissipates heat and promotes efficient motor cooling
- Direct-in vertical float switch independently tested to over 1,000,000 cycles
- 10 ft. power cord
- 1 year warranty
The K2 PRO 3/4 HP Submersible Sump Pump is designed for home sump pump applications. Engineered with the materials and performance the PRO prefers, the pump includes a Snap Action Vertical float switch for reliable and maintenance-free operation and fits into a 10 in. or larger sump basin. The top suction design filters debris, minimizes clogging, and reduces airlock. Maximum pumping capacity is 5200 gal. per hour at 0 ft. and 4080 gal. per hour at 10ft.
- Innovative flexible impeller eliminates clogging
- Reliable snap action vertical switch fits into a 10 in. or larger sump pit
- Includes innovative 1-1/2 in. Quick Connect Fitting which eliminates the need for PVC primer, glue, or plumber's tape
- Energy-efficient PSC motor with automatic reset thermal overload protection reduces operating cost
- Easy installation
- 10 ft. power cord
- 5 year warranty
Bell & Gossett Volute Body Gasket. Pump Parts And Accessories. Mfg #P57410
- Pump Parts And Accessories
- Pack of 1
- Weight of the product is 0.020 lbs.
- Length of the product is 0.400 in
The K2 1/3 HP Submersible Sump Pump is designed for home sump applications. The pump is constructed of heavy-duty cast iron and comes with a piggyback vertical float switch for reliable maintenance-free operation and easy replacement. The pump can fit into a 14 in. diameter or larger sump basin.
- Vortex impeller helps prevent clogging
- Includes innovative 1-1/2 in. Quick Connect Fitting which eliminates the need for PVC primer, glue, or plumber's tape
- Energy-efficient PSC motor with automatic reset thermal overload protection reduces operating cost
- Piggyback vertical float switch independently tested to over 1,000,000 cycles
- Easy installation
- 10 ft. power cord
- 3 year warranty
Bell & Gossett Bearing Assembly 1/2" Shaft Copper Sleeve. Pump Parts And Accessories. Mfg #185332LF
- Pump Parts And Accessories
- Pack of 1
- Weight of the product is 5.350 lbs.
- Length of the product is 8.900 in
The JACKEL JP250V sump pump is designed for basement installations, pumping below grade drainage and grey water collected in a sump pump basin. The JP250V is constructed of heavy-duty cast iron and corrosion proof stainless steel. It comes with the SJE-Rhombus Vertical Master Float Switch with 10 ft. piggy-back power cord. The JP250V is designed, assembled and tested in the United States and every pump is factory tested.
- Designed, assembled and tested in the United States of America
- 100% factory tested
- Factory certified performance curve included
- Stainless steel motor housing for ideal heat dissipation
- Rugged, heavy-duty cast iron volute
- Screened side intake prohibits clogging
- SJE-rhombus vertical master switch
- John crane carbon/ceramic mechanical seals
- Ball bearings for long life
Bell & Gossett 5/8" Mechanical Seal Kit. Pump Parts And Accessories. Mfg #186094LF
- Pump Parts And Accessories
- Pack of 1
- Product weight 0.150 LBS.
- 186094LF
Bell & Gossett Flange Gasket Set. Pump Parts And Accessories. Mfg #118373
- Pump Parts And Accessories
- Pack of 1
- Weight of the product is 0.050 lbs.
- Length of the product is 0.650 in
Bell & Gossett Heat Motor V01370-Indv. Pump Parts And Accessories. Mfg #189137
- Pump Parts And Accessories
- Pack of 1
- Product weight 0.080 LBS.
- Non Hazardous
Bell & Gossett Check Valve For Up S. Pump Parts And Accessories. Mfg #00596630
- Pump Parts And Accessories
- Pack of 1
- Product Weight is 0.020 lbs.
- Non Hazardous
The JACKEL JPACK22S-250V 1/2HP Pre-Plumbed Sump Pump System is fully plumbed and ready to install. Included in the system is a sump pump, sump pump basin and basin cover, check valve and inlet hub. The system is designed to remove drainage and grey water. The interior plumbing uses heavy-duty schedule 80 PVC pipe and the discharge pipe quickly connects to the cover via specifically designed threaded socket flange. Every sump pump is 100% factory tested.
- Comes JACKEL model JP250V 1/2HP sump pump
- 1/2HP sump pump has a stainless steel motor housing, cast iron volute, SJE-rhombus vertical switch and piggyback plug
- Polyethylene structural foam sump basin (18 in. x 24 in./22 Gal.)
- Polyethylene structural foam sump basin cover (1.5 in. threaded discharge flange, 2 in. threaded vent flange, 2-hole cord grommet, clear view removable inspection plate and drain trap)
- Comes with a 1.25 in. or 1.50 in. in-line sump pump check valve
- Includes a molded 4 in. inlet hub
- Interior plumbing includes schedule 80 PVC discharge pipe
- Included sump drain trap serves as a floor drain
Taco Seal Kit Rp. Pump Parts And Accessories. Mfg #2400-029RP
- Pump Parts And Accessories
- Pkg of 1
- TAA/BAA Compliant
- Height: 5.700
Bell & Gossett Water Slinger. Pump Parts And Accessories. Mfg #P77320
- Pump Parts And Accessories
- Pack of 1
- Weight of the product is 0.040 lbs.
- Length of the product is 0.300 in
Bell & Gossett Bearing Assembly With Impeller. Pump Parts And Accessories. Mfg #189134LF
- Pump Parts And Accessories
- Pack of 1
- Weight of the product is 2.600 lbs.
- Length of the product is 7.150 in
Bell & Gossett Pl55 Ci 2/5Hp 115V 1Ph 3250Rpm. Pumps. Mfg #1BL032
- Pumps
- Pack of 1
- Weight of the product is 16.060 lbs.
- Length of the product is 9.000 in
Bell & Gossett Bearing Gasket. Pump Parts And Accessories. Mfg #P80816
- Pump Parts And Accessories
- Pack of 1
- Weight of the product is 0.010 lbs
- Non Hazardous
Bell & Gossett Bearing Housing Gasket. Pump Parts And Accessories. Mfg #P80736
- Pump Parts And Accessories
- Pack of 1
- Weight of the product is 0.070 lbs.
- Length of the product is 1.000 in
Amana 90 Degree Stub. Acces-Refrig System Protect. Mfg #BT1369063
- Acces-Refrig System Protect
- Pack of 1
- Product Weight is 0.070 lbs.
- Non Hazardous
Bell & Gossett Impeller 3 3/8" Full Runner. Pump Parts And Accessories. Mfg #189128LF
- Pump Parts And Accessories
- Pack of 1
- Weight of the product is 0.260 lbs.
- Length of the product is 2.200 in
The Everbilt Pre-Plumbed Sump Basin System is ideal for basement installations, pumping below grade drainage and grey water. The system collects and pumps wastewater to a sewer or an on-site wastewater system. The system comes pre-plumbed and ready to install; no internal plumbing is required. The system features an injection molded structural foam polyethylene basin and cover that provides superior structural toughness and reliability. It includes the Everbilt Model HDS30, 3/10 HP Cast Iron Sump Pump. This Pre-Plumbed System also includes the Everbilt Inline Sump Check Valve and a water-tight molded 4 in. inlet hub.
- Features an 18 in. x 24 in., 22.5 Gal., heavy duty sump basin with a water-tight snap-in molded inlet hub
- Comes with the Everbilt HDS30 3/10 HP cast iron sump pump
- Heavy duty structural foam injection molded basin cover features a clear view removable inspection plate, the Sump DrainTrap cover drain, 1-1/2 in. threaded discharge flange, 2 in. threaded vent flange, molded reusable PVC cover seal and 8-bolts for a gas and odor tight seal
- System pumps up to 3,160 GPH
- Ultra-quiet Everbilt inline sump pump check valve
- Molded inlet hub comes with a stainless steel clamp for securing the inlet pipe
Bell & Gossett Flange Gasket Set 2.5 & 3" Pump. Pump Parts And Accessories. Mfg #118129
- Pump Parts And Accessories
- Pkg of 1
- TAA/BAA Compliant
- Height: 7.250
Bell & Gossett Motor Ring Set. Pump Parts And Accessories. Mfg #118228
- Pump Parts And Accessories
- Pack of 1
- Weight of the product is 0.260 lbs.
- Length of the product is 0.950 in
Bell & Gossett Volute Gasket For 8 Bolt Volute. Pump Parts And Accessories. Mfg #P57700
- Pump Parts And Accessories
- Pack of 1
- Weight of the product is 0.070 lbs.
- Length of the product is 0.550 in
Bell & Gossett Seal Kit 1 1/4"Id All Iron. Pump Parts And Accessories. Mfg #186860
- Pump Parts And Accessories
- Pack of 1
- Product weight 0.200 LBS.
- 186860
The K2 1/3 HP Submersible Sump Pump is designed for home sump applications. The pump is constructed of heavy-duty cast iron and comes with a piggyback tethered float switch for reliable maintenance-free operation and easy replacement. The pump can fit into a 14 in. diameter or larger sump basin.
- Vortex impeller helps prevent clogging
- Includes innovative 1-1/2 in. Quick Connect Fitting which eliminates the need for PVC primer, glue, or plumber's tape
- Energy-efficient PSC motor with automatic reset thermal overload protection reduces operating cost
- Piggyback tethered float switch independently tested to over 1,000,000 cycles
- Easy installation
- 10 ft. power cord
- 3 year warranty
Bell & Gossett Body Gasket. Pump Parts And Accessories. Mfg #P15691
- Pump Parts And Accessories
- Pack of 1
- Weight of the product is 0.020 lbs
- TAA/BAA Compliant
Bell & Gossett Strainer & Gasket For B7-12. Pump Parts And Accessories. Mfg #189160
- Pump Parts And Accessories
- Pack of 1
- Weight of the product is 0.040 lbs
- Non Hazardous
Bell & Gossett Adapt Ring Gasket. Pump Parts And Accessories. Mfg #P58542
- Pump Parts And Accessories
- Pack of 1
- Weight of the product is 0.030 lbs.
- Length of the product is 0.400 in
Yellow Jacket Vacuum Pump. Large Oil Sight Glass For Easy Monitoring Of Oil Level. Large Brass Oil Drain For Easy Access To Fast Oil Changes. Internal Intake Check Valve Prevents Oil Backup Into The System During A Power Failure. Heavy-Duty Steel Handle For Well-Balanced Carrying. Tethered Port Caps Stay With The Pump. Mfg #93600
- Large Oil Sight Glass For Easy Monitoring Of Oil Level
- Large Brass Oil Drain For Easy Access To Fast Oil Changes
- Internal Intake Check Valve Prevents Oil Backup Into The System During A Power Failure
- Heavy-Duty Steel Handle For Well-Balanced Carrying
The K2 1/2 HP Submersible Sump Pump is designed for home sump applications. The pump is constructed of heavy-duty cast iron and comes with a piggyback vertical float switch for reliable maintenance-free operation and easy replacement. The pump can fit into a 10 in. inch Dia or larger sump basin.
- Vortex impeller design helps prevent clogging
- Includes innovative 1-1/2 in. quick connect fitting which eliminates the need for PVC primer, glue, or plumber's tape
- Energy-efficient PSC motor with automatic reset thermal overload protection reduces operating cost
- Piggyback vertical float switch independently tested to over 1,000,000 cycles
- Easy installation
- 10 ft. power cord
- 3 year warranty
Bell & Gossett #7 Seal Kit Bronze Fitted. Pump Parts And Accessories. Mfg #118681LF
- Pump Parts And Accessories
- Pack of 1
- Weight of the product is 0.050 lbs.
- Length of the product is 1.100 in
Bell & Gossett 2" Flange Gasket Set. Pump Parts And Accessories. Mfg #118378
- Pump Parts And Accessories
- Pack of 1
- Product weight 0.070 LBS.
- 118378
BASEMENT SENTRY PREASSEMBLED BACKUP & PRIMARY PUMP - 507 WITH M53 SYSTEM PROPAK
K105-1 Sealkit 1.25"Buna/Carbi. Pump Parts And Accessories. Mfg #91909832
- Pump Parts And Accessories
- Non Hazardous
- Product Height:4.050 In.
- Product Weight: 0.670 Lbs.