Rugged Cast Iron Housing Construction. Provides Excellent Performance with Good Pressure for Well to 25 ft. Deep to water. 30/50 psi Pressure Switch. Flow Rates to 15 GPM, Pressures to 70 psi. A.O. Smith 115/230 Dual Voltage Motor.

• 3/4 HP cast iron shallow well jet pump provides strong performance with good pressure for wells 25 ft. deep or less
• High-strength polycarbonate nozzle and venture for maximum resistance to corrosion and abrasion
• Cleanout plug provided for ease of service
• Noryl impeller is precision-molded for perfect balance with ultra-smooth for highest performance and efficiency

Rugged Cast Iron Housing Construction. Provides Excellent Performance with Good Pressure for Well to 25 ft. Deep to water. 30/50 psi Pressure Switch. Flow Rates to 15 GPM, Pressures to 70 psi. A.O. Smith 115/230 Dual Voltage Motor.

• 3/4 HP cast iron shallow well jet pump provides strong performance with good pressure for wells 25 ft. deep or less
• High-strength polycarbonate nozzle and venture for maximum resistance to corrosion and abrasion
• Cleanout plug provided for ease of service
• Noryl impeller is precision-molded for perfect balance with ultra-smooth for highest performance and efficiency

The K2 Pumps 1/2 HP Shallow Well Jet Pump may be used for shallow well applications with water depths up to 25 ft. This may include drilled wells, driven wells, bored wells, creeks, lakes, ponds, and other water sources when the distance to the water is 25 ft. or less. Typical applications would be water supply for homes, cabins, farms, low-flow sprinkler systems, and utility water.

• Heavy-duty, dual voltage, 115/230V motor is preset at 230 volts and has a built-in voltage switch for easy conversion to 115 volts; see instructions
• Capacitor Start Induction Run (CSIR) motor design ensures higher starting torque
• Mechanical seal and stainless steel shaft
• Pre-mounted 30-50 pressure switch for automated operation
• Pressure gauge included for monitoring pressure
• 1-1/4 inch NPT suction and 1 inch NPT discharge
• Self-priming after pump housing is initially filled and foot valve or check valve is installed
• Certified to NSF/ANSI CAN 61 Standard for Safe Drinking Water and NSF/ANSI 372 Lead-Free Standard
• 3 year warranty

The K2 Pumps IntelliJet Convertible Jet Pump is constructed of heavy-duty cast iron and may be used for shallow well (single pipe) applications with water depth to 25 ft. or deep well (two pipe) applications with water depths to 90 ft. The IntelliJet technology is the most advanced in its category and does the troubleshooting for you. The LED panel indicates different status functions such as dry run protection, locked rotor/clogged impeller protection, unusual voltage protection, and too frequent starting (short cycle) protection. The IntelliJet motor design is a dual voltage 115/230-Volt motor that automatically detects the voltage. No rewiring or switching needed.

• LED Diagnostics Panel indicates operation status of the pump and alerts you if there is an issue
• Both shallow well (single pipe) and deep well (2 pipe) ejector kits included
• Includes pressure regulator for deep well applications
• Includes 30-50 pressure switch for monitoring pressure
• Pressure gauge included for monitoring pressure
• 1-1/4 in. NPT suction and 1 in. NPT discharge
• Certified to NSF/ANSI CAN 61 Standard for safe drinking water and NSF/ANSI 372 lead-free standard
• 3 year warranty

The K2 Pumps ½ HP shallow well jet pump may be used for shallow well applications with water depths up to 25 ft. This may include drilled wells, driven wells, bored wells, creeks, lakes, ponds, and other water sources when the distance to the water is 25 ft. or less. Typical applications would be water supply for homes, cabins, farms, low-flow sprinkler systems, and utility water. The pump housing is constructed of fiberglass-reinforced thermoplastic which makes it corrosion resistant and extends the life in the most corrosive water applications. Excellent choice for driven wells.

• Dual voltage, 115/230V motor is preset at 230 volts and has a built-in voltage switch for easy conversion to 115 volts; see instructions
• Totally Enclosed Fan Cooled (TEFC) motor protects motor internals from the elements, energy efficient PSC design reduces operating cost
• Self-priming after pump housing is initially filled and foot valve or check valve is installed
• Pre-mounted 30-50 pressure switch for automated operation
• Includes 100 PSI gauge for monitoring pressure
• 1-1/4 in. NPT suction and 1 in. NPT discharge, includes stainless steel discharge and suctions rings to prevent cracking when over tightening
• Certified to both NSF/ANSI CAN 61 standard for safe drinking water and NSF/ANSI 372 lead-free standard
• 1 year warranty

The K2 Pumps 3/4 HP shallow well jet pump may be used for shallow well applications with water depths up to 25 ft. This may include drilled wells, driven wells, bored wells, creeks, lakes, ponds, and other water sources when the distance to the water is 25 ft. or less. Typical applications would be water supply for homes, cabins, farms, low-flow sprinkler systems, and utility water. The pump housing is constructed of fiberglass-reinforced thermoplastic which makes it corrosion resistant and extends the life in the most corrosive water applications. Excellent choice for driven wells.

• Dual voltage, 115/230V motor is preset at 230 volts and has a built-in voltage switch for easy conversion to 115 volts; see instructions
• Totally Enclosed Fan Cooled (TEFC) motor protects motor internals from the elements, energy efficient PSC design reduces operating cost
• Self-priming after pump housing is initially filled and foot valve or check valve is installed
• Pre-mounted 30-50 pressure switch for automated operation
• Includes 100 PSI gauge for monitoring pressure
• 1-1/4 in. NPT suction and 1 in. NPT discharge, includes stainless steel discharge and suction rings to prevent cracking when over tightening
• Certified to both NSF/ANSI CAN 61 standard for safe drinking water and NSF/ANSI 372 lead-free standard
• 1 year warranty

The K2 Jet/Tank system includes a 1/2 HP cast iron shallow well jet pump, 6 gallon precharged tank and stainless steel braided hose and fittings to connect the pump to the tank. The system may be used for water depths to 25 ft. which includes drilled wells, driven wells, bored wells, creeks, lakes, ponds, and other water sources when the distance to the water is 25 ft. or less. Typical applications would be water supply for small homes, cabins, farms, low-flow sprinkler systems, and utility water. The pump includes a 30-50 pressure switch for automatic operation. 1 in. NPT suction and 1 in. NPT discharge.

• Dual voltage, 115/230V motor is preset at 230 volts and has a built-in voltage switch for easy conversion to 115 volts; see instructions
• Totally Enclosed Fan Cooled (TEFC) motor protects motor internals from the elements, energy efficient PSC design reduces operating cost
• Self-priming after pump housing is initially filled and foot valve or check valve is installed
• Pre-mounted 30-50 pressure switch for automated operation, also includes 100 PSI gauge for monitoring pressure
• 1 in. NPT suction and 1 in. NPT discharge
• Certified to both NSF/ANSI CAN 61 standard for safe drinking water and NSF/ANSI 372 lead-free standard
• 3 year warranty

The Everbilt Jet/Tank system comes with a 1/2 HP shallow well jet pump manufactured of heavy-duty cast iron for durability. The system also includes a 6 gallon pre-charged tank (15 gallon standard tank equivalent), stainless steel braided hose and the fittings to connect the pump to the tank. The system may be used for water depths to 25 ft. which includes drilled wells, driven wells, bored wells, creeks, lakes, ponds, and other water sources when the distance to the water is 25 ft. or less. Typical applications would be water supply for small homes, cabins, farms, low-flow sprinkler systems, and utility water.

• Totally enclosed fan cooled (TEFC) motor protects motor internals from the elements, energy efficient PSC design reduces operating cost
• Dual voltage, 115/230V motor is preset at 230 volts and has a built-in voltage switch for easy conversion to 115 volts; see instructions
• Pre-mounted 30-50 pressure switch for automated operation
• Pressure gauge included for monitoring pressure
• 1-1/4 in. NPT suction and 1 inch NPT discharge
• Self-priming after pump housing is initially filled and foot valve or check valve is installed
• Certified to NSF/ANSI CAN 61 Standard for Safe Drinking Water and NSF/ANSI 372 Lead-Free Standard
• 1 year warranty

The K2 Pumps ¾ HP Shallow Well Jet Pump may be used for shallow well applications with water depths up to 25 ft. This may include drilled wells, driven wells, bored wells, creeks, lakes, ponds, and other water sources when the distance to the water is 25 ft. or less. Typical applications would be water supply for homes, cabins, farms, low flow sprinkler systems, and utility water.

• Totally enclosed fan cooled (TEFC) motor protects motor internals from the elements
• Dual voltage, 115/230V motor is preset at 230 volts and has a built-in voltage switch for easy conversion to 115 volts; see instructions
• Pre-mounted 30-50 pressure switch for automated operation
• Pressure gauge included for monitoring pressure
• 1 in. NPT suction and 1 in. NPT discharge
• Self-priming after pump housing is initially filled and foot valve or check valve is installed
• Certified to NSF/ANSI CAN 61 Standard for safe drinking water and NSF/ANSI 372 lead-free standard
• 2 year warranty

The K2 PRO 3/4 HP Convertible Deep Well Jet Pump was engineered with the construction materials and performance the PRO prefers. It can be used for shallow well applications (single pipe) with depth to water 25 ft. or deep well applications (two pipes) with depth to water up to 90 ft. This may include drilled wells, driven wells, bored wells, creeks, lakes, ponds, and other water sources when the distance to the water is 90 ft. or less. Typical applications would be water supply for homes, cabins, farms, low-flow sprinkler systems, and utility water.

• Both shallow well (single pipe) and deep well (2 pipes) ejector kits included
• Heavy-duty, dual voltage, 115/230V motor is preset at 230 volts and has a built-in voltage switch for easy conversion to 115 volts; see instructions
• Capacitor Start Induction Run (CSIR) motor design ensures higher starting torque
• Mechanical seal and stainless steel shaft
• Pre-mounted 30-50 pressure switch for automated operation
• Pressure gauge included for monitoring pressure
• 1-1/4 in. NPT suction and 1 in. discharge
• Self-priming after pump housing is initially filled and foot valve or check valve is installed
• Certified to NSF/ANSI CAN 61 Standard for safe drinking water and NSF/ANSI 372 lead-free standard
• 3 year warranty