Pumps & Well Accessories
The Zoeller Tri-Check is a combination PVC check valve and ball valve for use with 2 in. discharge piping. It has a Glue x Glue Union Connection for easy installation. It has a full flow design for maximum performance.
- Full flow design
- Glue x Glue union connection
- Vertical or horizontal installation
- Includes ball valve for code requirements
Would you like to know if water gets too high in your sump or sewage pit? Is it code in your area to have a high water alarm on your sump or sewage pit? If so, the PS-WS is an accessory for The Pro Series Deluxe Float Controller (DFC2, VSC2, TSC2) that will activate a warning light, an audible alarm, send a signal to the remote terminal, and send information through the USB port when water reaches the sensor (allowing for text, email and in app notifications using the PS-WiFi). It simply attaches to the discharge pipe with included mounting hardware and the 10 foot cord plugs in at the bottom of the Deluxe controller. Between the visual light, audible alarm and optional text or email notifications (when using the PS-WiFi) you can be In the know when you are on the go.
- Will activate a warning light, an audible alarm, send a signal to the remote terminal, and send information through the USB port when water reaches the sensor
- For use with the pro series deluxe float controller (DFC2, VSC2, TSC2) or pro series water alarm (PWA2)
- Easily attaches to the discharge pipe with included mounting hardware
- 10 ft. cord with plug
For 4 in. inside diameter or larger will casings. Pumps up to 150 ft.. Patented floating stack design for sand resistance and reduced sand locking. Corrosion-resistant stainless steel pump and motor housing. Heavy-duty discharge connection. Precision-molded impellers and diffusers. Includes built-in check valve. Water filled submersible motor. 230-Volt, 1/2 HP, 2-wire motor does not need a control box.
- 10 GPM rated model for maximum efficiency in most homes
- 1-1/4 in. corrosion-resistant thermoplastic discharge head outlives conventional metals even in the harshest environments
- High-efficiency motor for fewer energy dollars
- NEMA-standard motor
- Built with a green ground wire per national electric code specifications for ground protection
- Start and run capacitors are built into the motor so there is no need for a control box
Holds prime for jet well pumps and irrigation pumps. Heavy perforated solid brass strainer. Features include perforated steel screen strainer, poppet with Buna-N O-ring, stem guide and wide channel for maximum flow.
- Spring loaded
- 2 years warranty against defect
- Used with jet pumps
- Female NPT threads
The PHCC Pro Series High Water Alarm is designed to minimize the risk of water damage by acting as an early warning system. For over two decades The Pro Series High Water Alarm has been protecting from unwanted water damage. It can be placed next to a water heater, beneath a laundry tub, under a sink, behind a refrigerator, next to the air conditioner, anywhere where water or moisture can collect. All it takes is 1/32 in. of water to sound a 110 dB alarm, detecting water before mold can grow, or alerting you to potential flood conditions. It includes 6 ft. of wire for extending the sensor to hard to reach locations. You can even increase the wire length up to 100 ft.
- Battery operated alarm can detect as little as 1/32 in. of water
- Produces a loud 110 dB alarm that can be heard throughout the house to provide an effective early warning system
- Use in a variety of locations: in a sump pit, near water heaters, refrigerators or dishwashers, next to washing machines, under sinks, close to air conditioner drain tubes or wherever there is a risk of water damage
- Battery-saver feature only uses energy when the alarm is sounding to offer a long battery life
- Accommodates the addition of more than 100 ft. of wire (additional 24-Gauge wire not included)
- Requires 9-Volt battery (not included)
- Tank connection: 1" MPT
- In-line connection: 1" MPT x 3/4" FPT
- Centre end length: 10"
- Drain/relief ports: (2) 1/2"
- Accessory ports: (2) 1/4"
- Lead free
ZOELLER M267, 1/2 HP SUBMERSIBLE SEWAGE, EFFLUENT, DEWATERING PUMP. AUTOMATIC SWITCH, 115V, W/ 10FT CORD
The Pumptrol FSG2J21BP electromechanical pressure switch by Square D is the most trusted brand in residential, commercial and industrial pumping applications. The FSG2J21BP has a 30 psi to 50 psi pressure setting range activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached. The NEMA 1 enclosure has a 1/4 in. NPSF internal fluid connection and screw clamp terminals. The switch works with a 1.5 HP or less pump. The adjustable differential range is 15 psi to 30 psi and the cut-out range is 20 psi to 65 psi. The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratory (UL) Listed and Canadian Standards Association (CSA) Certified. For over 75 years, Square D pressure switches continue to meet the needs of our customers. Square D Pumptrol pressure switches are manufactured by Schneider Electric.The Square D by Schneider Electric Pressure Switch is compatible with jet pumps, submersible pumps and reciprocating pumps. The standard action contacts open on rising pressure.
- Suitable for jet pumps, submersible pumps and reciprocating pumps
- Standard-action contacts open on rising pressure
- 30 - 50 PSI
- 1/4 in. pressure connection
- Standard action contacts open on rising pressure
The adjust-angle thermometer model AS5 has a black Aluminum case with glass front to exclude dirt and dust. Connection comes standard with a swivel nut 1-1/4 in. - 18 in. NEF thread. This item also comes with a brass thermowell that has a 3/4 NPT connection. The steam length is 3-1/2 in. and the temperature range is 0/160 degree F.
- Simple adjustment just 2 screws permit case to be rotated 180 degree and stem to be positioned in 10 degree increments allowing user to select the most desirable viewing position
- Easy readability lens front blue liquid filled thermometer tube is mounted on V-shaped aluminum scale with bold black lines and numerals
- Accurate calibrated against standards traceable to the national institute of standards and technology and guaranteed accurate to plus or minus 1 scale division
- Construction black molded ABS case with glass front to exclude dirt and dust is standard, aluminum case is optional at additional charge, plastic face is optional at additional charge, ABS case should not be subjected to temperatures greater than 200 degree F
This Professional Grade DUAL SUCTION Stainless Steel 1/3 HP RIDGID Pump is assembled in the USA and tested to 1 Million Cycles for performance that lasts. The 330RSDS will deliver dependable, energy-efficient, ultra-quiet performance for years to come - warrantied for 5 years. Able to pump up to 4,320 GPH. It is The Hardest Working Pump You'll Never Hear!
- Easy to install, start-to-finish in about 15 minutes
- Stainless steel housing construction with cast iron base for extended pump life
- High performance, energy efficient motor runs virtually silent
- Float guard protects float and switch for dependable operation
- Dual suction design removes debris and resists air lock
- Passes up to 1/2 in. solids
- 1-1/2 in. national pipe thread discharge complies to building codes
Rugged cast iron pump body and motor cover, exterior hardware stainless steel construction. 115-Volt oil filled motor with automatic reset overload provides safe operation. 10 ft. power cord. Vertical automatic switch. 1-1/2 in. discharge. 32 ft. shut-off. 62 GPM discharge.
- Piggyback-style float for automatic or manual operation
- Oil-filled motor with automatic reset overload provides safe operation
- Ball-bearing construction for long life
- Easily replaceable power cord with optional lengths available
- Maintenance free - no need to add battery fluid or distilled water
- Compatible with all new PHCC Pro Series backup products
- Up to 50 hours of protection (based on a 10% duty cycle) on the PS-C33 combination and PHCC-2400 battery backup sump pump system
- Up to 60 hours of protection (based on a 10% duty cycle) on the PS-C22 combination and PHCC-1730 battery backup sump pump system
- Up to 100 hours of protection (based on a 10% duty cycle) on the PS-C11 combination and PHCC-1000 battery backup sump pump system
- Runs pump intermittently for days
Utility gauge for commercial and industrial markets. Black steel case, chrome bezel, copper alloy internals. This gauge has a 3 1/2 dial, 1/4 npt connection, 100 psi/bar scale.
- 3 1/2 dial, 1/4 npt connection
- 100 psi/bar scale with no logo
- Accuracy 3-2-3% of span, ASME B40.1 Grade B
- Black steel case, chrome bezel, copper alloy internals
Pre-charged pressure tanks require 50% less space than standard conventional tanks, while providing greater water capacity between pump cycles for maximum system life. Tough appliance-like finish for extended life. Water never touches metal components, replaceable air/water separator for easy maintenance. Convenient air valve location for quick air pressure check.
- 85 Gal. pressure tank is factory pre-charged to 40 psi for efficiency
- Heavy-Gauge steel construction for maximum durability and extended life
- Precision press fit design minimizes gaps between components, reducing corrosion and seam leaks
- Large capacity ideal for high demand water usage
- NSF-61 approved tank with replaceable air/water separator
The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.
- High quaility
- Reliability
- Durability
- Easy to install
This 1/2 HP RIDGID All Cast Iron Sewage Pump is well suited for the harsh conditions. The RWCS50T is rugged and can pass solids up to 2 in. This pump is assembled in the USA for performance that lasts for years. It is easy to install and will deliver dependable performance. Warrantied for 3 years. This pump is able to pump up to 10,000 GPH.
- Pump is assembled to deliver dependable performance that lasts for years
- Sewage pump can pump out solids that are up to 2 in. Dia
- Quality and reliability, warrantied
- Years of worry-free operation that comes from an all cast iron pump, this pump delivers extreme durability even in a corrosive environment
This pressure relief valve features a solid brass construction. It protect against damage to piping and pressure tanks. All of its features comply with state lead-free requirements.
- Made of brass
- Relief valve
- Lead free
- For pressure tanks
BASEMENT SENTRY PREASSEMBLED BACKUP & PRIMARY PUMP - 507 WITH M53 SYSTEM PROPAK