Eco Portable Wash-Ware units can be set up anywhere clean hands are needed, indoors or out. The design of the Eco Portable Wash-Ware unit allows for convenient flat-pack shipment with quick and easy setup. This model provides a connection to a 3/4 in. hose for fresh water supply; waste is collected in an onboard 5 Gal. tank. The back of this unit is exposed, providing access for the hose connections and the waste thank. Casters are included. The single handle gooseneck faucet has a 0.5 GPM flow control.

• Portable hand-wash unit ships unassembled allowing for easy transport and comes ready to assemble
• Cabinet is fabricated of type 304 stainless steel with exposed surfaces polished to a #4 satin finish
• Access to plumbing and storage components is through rear of cabinet or removable front access panel
• Cabinet assembly is provided with a set of square rubber feet
• Countertop includes a marine edge to enable drainage around the rim of the integral trapezoidal lavatory bowl
• Water supply is from an existing plumbed, potable water source with a hose
• Wastewater is collected in a removable wastewater tank
• Handle faucet for manual activation

Beauty of granite without the weight. Low maintenance Solid Surface Shampoo Bowl accommodates one user at a time, with contoured neck rest. Constructed of molded cast polymer densified solid surface material composed of polyester/acrylic resin, UV stabilizer and aluminum trihydrate, mineral fillers, and proprietary colorant. The Aquasurf solid surface material is resistant to stains, impact, and burns. Damage can be easily repaired with everyday cleaners and/or fine grit. Includes a standard bowl; stainless steel 3-1/2" basket strainer, stainless steel wall mounting bracket (wall mounting hardware), and stainless steel hole plug. Includes faucet.

This 5 Gal. waste-water tank is designed as an accessory to the PS1000 series sinks. It receives the wastewater from the portable sink. This HDPE plastic tank is not imported.

• Waste-water tank is designed as an accessory to the PS1000 series sinks
• Tank collects waste water source for the portable sink
• Made of FDA approved high density polyethylene (HDPS) plastic
• 5 Gal. (18 l) capacity
• 63 mm neck finish
• Dimensions: 9-1/2 in. L x 9-1/2 in. W x 14-3/4 in. H
• Not UN rated
• Has a fixed handle
• Tank can be reconditioned and recycled
• Proudly made in the states

This Stylist Group single bowl 18 in. x 15 in. drop-in sink with rear ledge, from JUST MANUFACTURING. It is a seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces satin blended No. 4 finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity. Self-rimming top mount with Grip-Rim Plus with stainless steel mounting channels.

• 18-Gauge type 304 stainless steel
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Polished with a satin blended number 4-finish with highlighted bowl rim
• Fully coated underside
• Grip-rim plus self-rimming 300 series stainless steel mounting channel
• Conforms to ASME/ANSI A112.19.3M

Deluxe Stainless Portable Sinks are designed to provide hand washing capabilities in areas not normally equipped for it. Portable Wash-Ware units can be set up anywhere--inside or out. This model is supplied by an onboard 5 Gal. freshwater tank and operates via on-demand electric pump. The waste is collected in an onboard 6 Gal. tank. The single handle gooseneck faucet is sensor operated with battery and has a 0.5 GPM flow control.

• Swivel casters for smooth transit, roll it where you need it
• Integrated attachment points for paper towel holder, trash can accessories and soap holders
• Integrated ball-valve for easy shutoff when draining waste tank (not available on pump models)
• Hose models provide convenient hand-washing anywhere a hose can reach
• Plug-in electric pump model delivers water from a tank under cabinet if hose is out of reach
• Touchless sensor faucet reduces the spread of bacteria

This Academic Group single bowl 17 in. x 25 in. drop-in sink from JUST MANUFACTURING. Seamless die-drawn construction of 18-Gauge type 304 stainless steel. Faucet flange at rear of compartment. Interior and top surfaces polished to a non-porous Hand Blended Just Finish. Fully coated underside insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity. Self-rimming top mount with Grip-Rim Plus stainless steel mounting channels.

• 18-Gauge USA mill certified type 304, stainless steel
• ADA compliant
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Fully coated underside insulated for sound and reduces condensation
• Grip-rim plus with stainless steel mounting channels
• Drain punched #35 centered

Bradley Classic Washfountain is designed for heavy duty hand washing. It features a 54 in. corner bowl and pushbutton activation. This unit can accommodate up to 3 users with total water usage of 5-Gal. per minute. This model is ADA compliant with high vandal resistance.

• Reliable push button control activation
• Floor mounted
• 54 in. stainless steel corner bowl size
• Highly vandal resistant
• ADA compliant
• cUPC approval
• 14-Gauge stainless steel
• 4-polished finish
• Can be wall mounted or floor mounted

Deluxe Stainless Portable Sinks are designed to provide hand washing capabilities in areas not normally equipped for it. Portable Wash-Ware units can be set up anywhere--inside or out. This model is supplied by an onboard 5 Gal. freshwater tank and operates via on-demand electric pump. The waste is collected in an onboard 6 Gal. tank. The single handle gooseneck faucet is sensor operated with battery and has a 0.5 GPM flow control.

• Swivel casters for smooth transit, roll it where you need it
• Integrated attachment points for paper towel holder, trash can accessories and soap holders
• Integrated ball-valve for easy shutoff when draining waste tank (not available on pump models)
• Hose models provide convenient hand-washing anywhere a hose can reach
• Plug-in electric pump model delivers water from a tank under cabinet if hose is out of reach
• Touchless sensor faucet reduces the spread of bacteria

This 5 Gal. fresh-water tank is designed as an accessory to the PS1000 series sinks. It provides fresh water source for the portable sink. This HDPE plastic tank is not imported.

• Fresh-water tank is designed as an accessory to the PS1000 series sinks
• Tank provides fresh water source for the portable sink
• Made of FDA approved high density polyethylene (HDPS) plastic
• 5 Gal. (18 l) capacity
• 63 mm neck finish
• Dimensions: 9-1/2 in. L x 9-1/2 in. W x 14-3/4 in. H
• Not UN rated
• Has a fixed handle
• Tank can be reconditioned and recycled
• Proudly made in the states

The Sentry Floor Mounted Circular Washfountain features a reliable push button activated air metering control for easy activation. The unit is easy to clean and highly vandal resistant due to the fact that it is made of heavy 14-Gauge stainless steel. The unit features one water hook up and one waste hook up for ease of installation.

• Push button activated air metering
• Factory tested and preassembled
• 14-Gauge stainless steel
• Highly vandal resistant
• ADA compliant
• Designated a low flow fixture

This Undermount Group single compartment 18 in. x 24 in. deep undermount sink from JUST MANUFACTURING. Seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces polished to a non-porous Hand Blended Just Finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity.

• 18-Gauge type 304 stainless steel
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Polished with a satin blended number 4-finish with highlighted bowl rim
• Fully coated underside
• Drain punch J-35 drain
• Conforms to ASME/ANSI A112.19.3M
• Deep bowl

This 5 Gal. waste-water tank is designed as an accessory to the EPS1000 series sinks. The intent is to receive the wastewater from the portable sink. This HDPE plastic tank is not imported.

• Waste-water tank is designed as an accessory to the EPS1000 series sinks
• Tank collects waste water source for the portable sink
• Made of FDA approved high density polyethylene (HDPS) plastic
• 5 Gal. (18 l) capacity
• 63 mm neck finish
• Dimensions: 9.46 in. L x 9.52 in. W x 14.68 in. H
• Not UN rated
• Has a fixed handle
• Tank can be reconditioned and recycled
• Proudly made in the states

The Bradley 54 in. Sentry Circular Washfountain is designed for heavy duty handwashing applications. It features a reliable push button water activation and 14-Gauge heavy duty stainless steel. The product meets ADA requirements and comes factory tested and preassembled for ease of use. The unit only requires one water connection and one waste connection and can accommodate up to 8-users at a single time.

• Push button activation
• ADA compliant
• 14-Gauge stainless steel
• Vandal resistant
• Ships preassembled
• Features a Bradley navigator thermostatic mixing valve for precise water temperature control

This Academic Group ADA compliant single bowl 17 in. x 25 in. drop-in sink from JUST MANUFACTURING. Seamless die-drawn construction of 18-Gauge type 304 stainless steel. Faucet flange at rear of compartment. Interior and top surfaces polished to a non-porous Hand Blended Just Finish. Fully coated underside insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity. Self-rimming top mount with Grip-Rim Plus stainless steel mounting channels.

• 18-Gauge USA mill certified type 304, stainless steel
• ADA compliant
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Fully coated underside insulated for sound and reduces condensation
• Grip-rim plus with stainless steel mounting channels
• Drain punched #35 centered

This Undermount Group single compartment 18 in. x 30 in. deep undermount sink from JUST MANUFACTURING. Seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces polished to a non-porous Hand Blended Just Finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity.

• 18-Gauge type 304 stainless steel
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Polished with a satin blended number 4-finish with highlighted bowl rim
• Fully coated underside
• Drain punch J-35 drain
• Conforms to ASME/ANSI A112.19.3M
• Deep bowl

This Undermount Group single compartment 18 in. x 18 in. undermount sink from JUST MANUFACTURING. Seamless die-drawn construction of 18-Gauge type 304-stainless steel. Interior and top surfaces polished to a non-porous Hand Blended Just Finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity.

• 18-Gauge type 304-stainless steel
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Polished with a satin blended number 4-finish with highlighted bowl rim
• Fully coated underside
• Drain punch J-35 drain
• Conforms to ASME/ANSI A112.19.3M

Deluxe Stainless Portable Sinks are designed to provide hand washing capabilities in areas not normally equipped for it. Portable Wash-Ware units can be set up anywhere--inside or out. This model is supplied by an onboard 5 Gal. freshwater tank and operates via on-demand electric pump. The waste is collected in an onboard 6 Gal. tank. The single handle gooseneck faucet has a 0.5 GPM flow control.

• Swivel casters for smooth transit, roll it where you need it
• Integrated attachment points for paper towel holder, trash can accessories and soap holders
• Integrated ball-valve for easy shutoff when draining waste tank (not available on pump models)
• Plug-in electric pump model delivers water from a tank under cabinet if hose is out of reach
• Handle faucet for manual activation

This trash receptacle designed as an accessory to the PS1000 series sinks. It provides a convenient trash receptacle for used paper towels within easy reach. Installation is simple to any PS1000 series sink.

• Trash receptacle is an accessory to the PS1000 series sinks
• Conveniently mounted to the side of the sink for used paper towels
• Capacity is 7.3 Gal. (27.5 l)
• Receptacle is constructed of sturdy 18-Gauge, 304 type stainless steel
• Finished on all sides to a #4 satin finish
• 4-point mounting is very secure
• Mounting hardware allows the trash receptacle to be removed for cleaning
• Unit is easily mounted to the side of any PS1000 series sink
• All sharp edges are broken
• Corners of receptacle are rounded for safety

This Stylist Group single bowl 16 in. x 17 in. drop-in sink with rear ledge, from JUST MANUFACTURING. It is a seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces satin blended No. 4 finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity. Self-rimming top mount with Grip-Rim Plus with stainless steel mounting channels.

• 18-Gauge type 304 stainless steel
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Polished with a satin blended number 4-finish with highlighted bowl rim
• Fully coated underside
• Grip-rim plus self-rimming 300 series stainless steel mounting channel
• Conforms to ASME/ANSI A112.19.3M

This 5 Gal. fresh-water tank is designed as an accessory to the EPS1000 series sinks. It provides fresh water source for the portable sink. This HDPE plastic tank is not imported.

• Fresh-water tank is designed as an accessory to the PS1000 series portable wash-ware sinks
• Tank provides fresh water source for the portable sink
• Made of FDA approved high density polyethylene (HDPS) plastic
• 5 Gal. (18 l) capacity
• 63 mm neck finish
• Dimensions: 9.46 in. L x 9.52 in. W x 14.68 in. H
• Not UN rated
• Has a fixed handle
• Tank can be reconditioned and recycled
• Proudly made in the states

This Stylist Group single bowl 20 in. x 19 in. drop-in sink with rear ledge, from JUST MANUFACTURING. It is a seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces satin blended No. 4 finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity. Self-rimming top mount with Grip-Rim Plus with stainless steel mounting channels.

• 18-Gauge type 304 stainless steel
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Polished with a satin blended number 4-finish with highlighted bowl rim
• Fully coated underside
• Grip-rim plus self-rimming 300 series stainless steel mounting channel
• Conforms to ASME/ANSI A112.19.3M

Murdock model GWJ85 series is a round pedestal mounted Hand Wash. It is barrier free and vandal resistant. It is made from 16-Gauge, type 304 stainless steel bowl mounted into a 12-Gauge, heavy-duty stainless steel support arm. The finish is a green powder coated. Unit shall be activated by a 9-Volt DC Hands Free Sensor Faucet. The faucet has a 0.5 GPM Laminar flow outlet to minimize splashing. This model complies with ANSI A117.1, Public Law 111-380 (NO LEAD), CHSC 116875; Fixture meets ADA requirements.

• ADA compliant (when properly installed)
• Resistant to sunlight, heat, moisture and wear
• Hands free sensor hand washing faucet
• Stainless steel construction for durability and easy cleaning
• Maintenance-friendly design
• Hands-free, battery-operated sensor faucet to reduce the potential spread of bacteria
• Laminar flow to minimize splash and provide the recommended flow for sufficient hand washing
• Cap over drain to reduce airborne germs

This C-Fold paper towel dispenser is designed as an accessory to the PS1000 Series sinks. It puts paper towels close at hand. The towels are secure, replacement is easy.

• Triple C-fold paper holder includes mounting hardware
• Puts the towels close to the hand washing activity
• Open bay design keeps the towels secure and easy to refill
• Each bay holds a half ream of 10-1/4 in. x 3-5/8 in. folded sheets of C-fold paper towels
• Easily mounted to the rear and sides of any PS1000 series sink
• Mounting hardware allows the paper holder to be removed for cleaning
• Constructed of sturdy 16-Gauge, 304 type stainless steel
• Exterior is a #4 satin finish
• Interior is sand blasted
• All sharp edges are broken

Sentry 36 in. Semi-Circular Stainless Steel Washfountain. This product features a reliable pushbutton activation and meets all ADA requirements. The stainless steel offers high vandal resistance and is easy to clean.

• 36 in. semi-circular bowl size
• Floor mounted
• 14-Gauge type 304 stainless steel with a #4 polish
• Push button activation
• Meets ADA requirements
• Factory tested and ships pre-assembled
• Vandal resistant and easy to clean

This Undermount Group ADA compliant single compartment 18 in. x 21 in. undermount sink from Just. Seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces polished to a non-porous Hand Blended Just Finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity.

• 18-Gauge type 304 stainless steel
• ADA compliant
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Fully coated underside
• Polished with a satin blended no. 4 finish, with highlighted bowl rim
• Conforms to ASME/ANSI A112.19.3M

• Economical Bradstone weighs less than precast bowls
• Thermoset polyester bowl with stainless steel base
• Includes liquid soap dispenser, sprayhead with stainless steel support tube, spud with locknut and domed strainer, thermostatic mixing valve, stops, check, strainers, and flexible stainless steel supply lines
• Max flow rate 4.5 GPM
• Factory assembled
• 9" deep bowl, designed for heavy-duty hand washing
• Reliable foot, air, or infrared activations, or TouchTime mechanical metering
• An extremely durable plastic material made of reinforced thermosetting polyester resins
• Pre-assembled bowl and pedestal

This Undermount Group single compartment 18 in. x 21 in. undermount sink from JUST MANUFACTURING. Seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces polished to a non-porous Hand Blended Just Finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity.

• 18-Gauge type 304 stainless steel
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Polished with a satin blended number 4-finish with highlighted bowl rim
• Fully coated underside
• Drain punch J-35 drain
• Conforms to ASME/ANSI A112.19.3M

This Undermount Group single compartment 16 in. x 18 in. undermount sink from JUST MANUFACTURING. Seamless die-drawn construction of 18-Gauge type 304-stainless steel. Interior and top surfaces polished to a non-porous Hand Blended Just Finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity.

• 18-Gauge type 304-stainless steel
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Polished with a satin blended number 4-finish with highlighted bowl rim
• Fully coated underside
• Drain punch J-35 drain
• Conforms to ASME/ANSI A112.19.3M

Bradstone 36 in. Semi-Circular Classic Washfountain features our solid surface material designed for heavy duty hand washing. The product comes fully pre-assembled and includes a pedestal. The design of the product call allow up to 3 users at a time with a flow rate of 1.25 GPM.

• Bradstone solid surface material
• Pre-assembled
• 1-water connection/one drain connection
• 1.25 GPM flow rate
• Foot control activation
• Pedestal features die formed legs of 14-Gauge steel and 16-Gauge galvanized steel braces

These sinks are designed to provide hand washing capabilities in areas not normally equipped for it. Portable Wash-Ware units can be set up anywhere-inside or out. This model provides connections to 3/4 in. hoses for both freshwater and waste. The single handle gooseneck faucet has a 0.5 GPM flow control.

• Swivel casters for smooth transit, roll it where you need it
• Integrated attachment points for paper towel holder, trash can accessories and soap holders
• Hose models provide convenient hand-washing anywhere a hose can reach
• Hose connections in the back of the unit
• Handle faucet for manual activation
• Faucet has 0.5 GPM flow control

54 in. Bradstone Circular Classic Washfountain. Heavy duty Bradstone material offers low maintenance and high vandal resistance. Foot control water control. Can accommodate up to 6 users at a time. Operates at water pressure ranges of 20-80 psi.

• 54 in. circular design
• Foot control water activation
• Vandal resistant
• 1.25 Gal. per minute flow rate
• Deep well for heavy duty handwashing
• Pre-assembled bowl and pedestal for ease of installation
• 1-water connection and 1-drain connection

This Undermount Group ADA compliant single compartment 16 in. x 20 in. undermount sink from Just Manufacturing. Seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces polished to a non-porous Hand Blended Just Finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity.

• 18-Gauge type 304 stainless steel
• ADA compliant
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Fully coated underside
• Polished with a satin blended no. 4 finish, with highlighted bowl rim
• Conforms to ASME/ANSI A112.19.3M

This Undermount Group single compartment 18 in. x 21 in. deep undermount sink from JUST MANUFACTURING. Seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces polished to a non-porous Hand Blended Just Finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity.

• 18-Gauge type 304 stainless steel
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Polished with a satin blended number 4-finish with highlighted bowl rim
• Fully coated underside
• Drain punch J-35 drain
• Conforms to ASME/ANSI A112.19.3M
• Deep bowl

This Stylist Group single deep bowl 19" x 21" drop-in sink with rear ledge, from Just Manufacturing, is 100% Made in USA. It is a seamless die-drawn construction of 18 gauge type 304 stainless steel. Interior and top surfaces satin blended No. 4 finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4" radius corners provides greater capacity. Self-rimming top mount with Grip-Rim Plus with stainless steel mounting channels.

• 18-Gauge type 304-stainless steel
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Polished with a satin blended number 4-finish with highlighted bowl rim
• Fully coated underside
• Grip-rim plus self-rimming 300-series stainless steel mounting channel
• Conforms to ASME/ANSI A112.19.3M

HY-G1-TP portable, ENVIRO series hand wash sink, constructed of heavy-duty 16 /18 gauge, type 304 stainless steel. The heavy-duty HY-G1-TP station is self-contained from start to finish including water from storage tanks below, sensor activated soap dispenser, auto dispensed paper towel to be disposed of in the convenient side waste receptacle. These are made for indoor and outdoor use. Our "On the move. . . to the location you need" station comes to life in our all sensor HY-G1-TP unit services child through adult heights. Ideal for school locations such as gymnasiums, classrooms, hallways, cafeterias, outdoor sporting areas, and other locations where accessible water is limited and hands-free cleanliness is a must.

• Stainless steel construction of heavy duty 16/18-Gauge USA mill certified type 304, stainless steel
• Large capacity, single washbasin prevents splash out and offset drain location prevents aerosolization of pathogens
• Hands-free end-to-end hygienic solution includes sensor faucet, soap dispenser, and towel dispenser
• Underdeck TMV and included water heater create a comfortable hand-washing experience wherever needed
• Heavy-duty grab bar handle and EZ Roll locking casters allow for easy positioning - indoors or out
• 120-volt water heater 2 Imp gallons, and 115-volt water pump
• Complete with stowable child step to accommodate users of all ages
• Removable waste and freshwater tanks
• Lockable access door
• ADA Compliant - side reach

This 6.5 Gal. waste-water tank is designed as an accessory to the EPS1000 series sinks. The intent is to provide wastewater source for the portable sink. This HDPE plastic tank is not imported.

• Waste-water tank is designed as an accessory to the EPS1000 series sinks
• Tank collects waste water source for the portable sink
• Made of FDA approved high density polyethylene (HDPS) plastic
• Durable, rust and dent-proof
• 6.5 Gal. (24 l) capacity
• Dimensions: 14-1/2 in. L x 8-1/2 in. W x 18-1/2 in. H
• Not UN rated
• Convenient back and top handles for easier pouring
• Spout is self-venting
• Tank can be recycled

This Stylist Group single bowl 19 in. x 21 in. drop-in sink with rear ledge, from JUST MANUFACTURING. It is a seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces satin blended No. 4 finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity. Self-rimming top mount with Grip-Rim Plus with stainless steel mounting channels.

• 18-Gauge type 304 stainless steel
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Polished with a satin blended number 4-finish with highlighted bowl rim
• Fully coated underside
• Grip-rim plus self-rimming 300 series stainless steel mounting channel
• Conforms to ASME/ANSI A112.19.3M

This Undermount Group double compartment 18 in. x 32 in. undermount sink from JUST MANUFACTURING. Seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces polished to a non-porous Hand Blended Just Finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity.

• 18-Gauge type 304 stainless steel
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Polished with a satin blended number 4-finish with highlighted bowl rim
• Fully coated underside
• Drain punch J-35 drain
• Conforms to ASME/ANSI A112.19.3M

This Stylist Group single bowl 18 in. x 15 in. drop-in sink with rear ledge, from JUST MANUFACTURING. It is a seamless die-drawn construction of 18-Gauge type 304-stainless steel. Interior and top surfaces satin blended No. 4 finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity. Self-rimming top mount with Grip-Rim Plus with stainless steel mounting channels.

• 18-Gauge type 304-stainless steel
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Polished with a satin blended number 4-finish with highlighted bowl rim
• Fully coated underside
• Grip-rim plus self-rimming 300-series stainless steel mounting channel
• Conforms to ASME/ANSI A112.19.3M

Bradley Sentry Semi-Circular Washfountain is designed for heavy duty hand washing and its design is intended for smaller spaces. The product is manufactured from 304 Stainless Steel and is highly vandal resistant. Can be installed at a standard height or juvenile height. Features one water connection and one drain connection for ease of installation.

• infrared activation
• Type 304-stainless steel for vandal resistance
• Generous 54 in. bowl size
• Can accommodate up to 4 users
• Includes stainless steel supply lines and bradley navigator thermostatic mixing valve to guard against water temperature scalding
• Factory tested and ships pre-assembled

This Stylist Group single bowl 18 in. x 15 in. drop-in sink with rear ledge, from JUST MANUFACTURING. It is a seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces satin blended No. 4 finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity. Self-rimming top mount with Grip-Rim Plus with stainless steel mounting channels.

• 18-Gauge type 304 stainless steel
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Polished with a satin blended number 4 finish with highlighted bowl rim
• Fully coated underside
• Grip-rim plus self-rimming 300 series stainless steel mounting channel
• Conforms to ASME/ANSI A112.19.3M

Eco Portable Wash-Ware units can be set up anywhere clean hands are needed, indoors or out. The design of the Eco Portable Wash-Ware unit allows for convenient flat-pack shipment with quick and easy setup. This model provides connections to 3/4 in. hoses for both fresh water and waste. The back of this unit is exposed, providing access for the hoses and connections. A Mini Tank Water Heater is supplied to provide tempered water. Casters are included. The single handle gooseneck faucet has a 0.5 GPM flow control.

• Portable hand-wash unit ships unassembled allowing for easy transport and comes ready to assemble
• Cabinet is fabricated of type 304 stainless steel with exposed surfaces polished to a #4 satin finish
• Access to plumbing and storage components is through rear of cabinet or removable front access panel
• Cabinet assembly is provided with a set of square rubber feet
• Countertop includes a marine edge to enable drainage around the rim of the integral trapezoidal lavatory bowl
• Water supply is from an existing plumbed, potable water source with a hose through an electric water heater, with thermostatic mixing valve, to provide tempered water
• Wastewater is collected in a removable wastewater tank
• Handle faucet for manual activation

This Stylist Group single bowl 21 in. x 25 in. drop-in sink with rear ledge, from JUST MANUFACTURING. It is a seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces satin blended No. 4 finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity. Self-rimming top mount with Grip-Rim Plus with stainless steel mounting channels.

• 18-Gauge type 304 stainless steel
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Polished with a satin blended number 4-finish with highlighted bowl rim
• Fully coated underside
• Grip-rim plus self-rimming 300 series stainless steel mounting channel
• Conforms to ASME/ANSI A112.19.3M

This splash guard is designed as an accessory to the PS1000 series sinks. It prevents splashing outside of the sink. Installation is simple with the eight fasteners provided.

• Splash guard includes mounting hardware
• Helps to contain hand washing activity
• Splash guard spans the width of the sink and wraps around the sides
• Easily mounted to the rear and sides of any PS1000 series sink
• 8-machine screws, washers and nuts are provided
• Constructed of sturdy 18-Gauge, 304 type stainless steel
• Exterior is a #4 satin finish
• Interior is a #4 satin finish
• All sharp edges are broken
• Protective vinyl is left adhered to the panels to provide protection during shipment and installation

This 6 Gal. waste-water tank is designed as an accessory to the PS1000 series sinks. It receives the wastewater from the portable sink. This HDPE plastic tank is not imported.

• Waste-water tank is designed as an accessory to the PS1000 series portable wash-ware sinks
• Tank collects waste water source for the portable sink
• Made of FDA approved high density polyethylene (HDPS) plastic
• 6 Gal. (22 l) capacity
• 61 mm neck finish
• Dimensions: 11 in. L x 10-1/4 in. W x 16-1/2 in. H
• UN certification of UN3H1/Y1.8/100 for the shipping and handling of hazardous materials
• Has a fixed handle
• Tank can be reconditioned and recycled
• Proudly made in the states

This Stylist Group double bowl 19 in. x 33 in. drop-in sink from JUST MANUFACTURING. Seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces satin blended No. 4 finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity. Self-rimming top mount with Grip-Rim Plus with stainless steel mounting channels.

• 18-Gauge USA mill certified type 304, stainless steel
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Exposed surfaces polished with hand-blended just finish
• Fully coated underside insulated for sound and reduces condensation
• Grip-rim plus with stainless steel mounting channels
• Drain punched #35 centered

Bradley Classic 54 in. Stainless Semi-Circular Washfountain. Foot control activation for hands free use. Features a one piece 14-Gauge stainless steel bowl with a polished finish. Can accommodate up to 4-users at a 3 Gal. per minute flow rate.

• 54 in. semi-circular bowl design
• Foot control activation
• 14-Gauge stainless steel
• Operates at a 20-80 psi water pressure
• 1-water connection
• 9 in. bowl depth

This Undermount Group single compartment 18 in. x 30 in. undermount sink from JUST MANUFACTURING. Seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces polished to a non-porous Hand Blended Just Finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity.

• 18-Gauge type 304 stainless steel
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Polished with a satin blended number 4-finish with highlighted bowl rim
• Fully coated underside
• Drain punch J-35 drain
• Conforms to ASME/ANSI A112.19.3M