This deluxe splash guard is designed as an accessory to the PS1000 series sinks. It provides a backdrop to keep hand washing soap and paper towels within easy reach. Installation is simple to any PS1000 series sink.

• Splash guard includes mounting hardware
• Helps to contain hand washing activity and keeps hand washing soap and paper towels within easy reach
• Splash guard is constructed of sturdy 18-Gauge, 304 type stainless steel and finished on all sides to a #4 satin finish
• Paper holder is constructed of sturdy 16-Gauge, 304 type stainless steel with the interior sand blasted and the exterior with a #4 satin finish
• Each bay holds a half ream of 10-1/4 in. x 3-5/8 in. folded sheets of C-fold paper towels
• Soap caddy is designed to securely hold a pump-style soap bottle of the user's choice
• 2-piece soap caddy is constructed of sturdy 16-Gauge, 304 type stainless steel, finished to a #4 satin finish
• Mounting hardware is included for the splash guard, paper holder and soap caddy
• Unit is easily mounted to the rear and sides of any PS1000 series sink
• All sharp edges are broken

This Undermount Group single compartment 11 in. x 14 in. undermount sink from JUST MANUFACTURING. Seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces polished to a non-porous Hand Blended Just Finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity.

• 18-Gauge type 304 stainless steel
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Polished with a satin blended number 4-finish with highlighted bowl rim
• Fully coated underside
• Drain punch J-35 drain
• Conforms to ASME/ANSI A112.19.3M

This EPS back splash is designed as an accessory to the EPS1000 series sinks. It provides a backdrop to keep hand washing soap and paper towels within easy reach. Installation is simple to any EPS1000 series sink.

• Splash guard includes mounting hardware
• Helps to contain hand washing activity and keeps hand washing soap and paper towels within easy reach
• Splash guard is constructed of sturdy 18-Gauge, 304 type stainless steel and finished on all sides to a #4 satin finish
• Paper holder is constructed of sturdy 16-Gauge, 304 type stainless steel with the interior sand blasted and the exterior with a #4 satin finish
• Each bay holds a half ream of 10-1/4 in. x 3-5/8 in. folded sheets of C-fold paper towels
• Soap caddy is designed to securely hold a pump-style soap bottle of the user's choice
• 2-piece soap caddy is constructed of sturdy 16-Gauge, 304 type stainless steel, finished to a #4 satin finish
• Mounting hardware is included for the splash guard, paper holder and soap caddy
• Unit is easily mounted to the rear and sides of any EPS1000 series sink
• All sharp edges are broken

This C-Fold paper towel dispenser is designed as an accessory to the PS1000 Series sinks. It puts paper towels close at hand. The towels are secure, replacement is easy.

• Triple C-fold paper holder includes mounting hardware
• Puts the towels close to the hand washing activity
• Open bay design keeps the towels secure and easy to refill
• Each bay holds a half ream of 10-1/4 in. x 3-5/8 in. folded sheets of C-fold paper towels
• Easily mounted to the rear and sides of any PS1000 series sink
• Mounting hardware allows the paper holder to be removed for cleaning
• Constructed of sturdy 16-Gauge, 304 type stainless steel
• Exterior is a #4 satin finish
• Interior is sand blasted
• All sharp edges are broken

Bradley Sentry Corner Shallow Bowl Washfountain. Features a generous 54 in. bowl size. Factory tested, pre-assembled and floor mounted for ease of installation. Made with 304 Stainless Steel. Push button activation. Single water connection and drain connection helps with installation.

• heavy duty stainless steel construction for vandal resistance
• Generous 54 in. Bowl size
• Air hand activation
• Meets ADA requirements
• All moving parts safely concealed within the wash fountain
• Comes standard with stainless steel supply tubes and a Bradley navigator thermostatic mixing valve to safeguard against hot water scalding

This Stylist Group single bowl 21 in. x 25 in. drop-in sink with rear ledge, from JUST MANUFACTURING. It is a seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces satin blended No. 4 finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity. Self-rimming top mount with Grip-Rim Plus with stainless steel mounting channels.

• 18-Gauge type 304 stainless steel
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Polished with a satin blended number 4-finish with highlighted bowl rim
• Fully coated underside
• Grip-rim plus self-rimming 300 series stainless steel mounting channel
• Conforms to ASME/ANSI A112.19.3M

This 6.5 Gal. fresh-water tank is designed as an accessory to the EPS1000 series sinks. It provides fresh water source for the portable sink. This HDPE plastic tank is not imported.

• Fresh-water tank is designed as an accessory to the EPS1000 series sinks
• Tank provides fresh water source for the portable sink
• Made of FDA approved high density polyethylene (HDPS) plastic
• Durable, rust and dent-proof
• 6.5 Gal. (24 l) capacity
• Dimensions: 14-1/2 in. L x 8-1/2 in. W x 18-1/2 in. H
• Not UN rated
• Convenient back and top handles for easier pouring
• Spout is self-venting
• Tank can be recycled

Bradley Classic Washfountain is designed for heavy duty hand washing. It features a 54 in. circular bowl and pushbutton activation. This unit can accommodate up to 8-users with total water usage of 5-Gal. per minute.

• Reliable push button control activation
• Floor mounted
• 54 in. stainless steel bowl size
• Highly vandal resistant
• ADA compliant
• cUPC approval
• 14-Gauge stainless steel
• 4-polished finish

This Stylist Group single bowl 18 in. x 15 in. drop-in sink with rear ledge, from JUST MANUFACTURING. It is a seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces satin blended No. 4 finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity. Self-rimming top mount with Grip-Rim Plus with stainless steel mounting channels.

• 18-Gauge type 304 stainless steel
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Polished with a satin blended number 4-finish with highlighted bowl rim
• Fully coated underside
• Grip-rim plus self-rimming 300 series stainless steel mounting channel
• Conforms to ASME/ANSI A112.19.3M

This 5 Gal. waste-water tank is designed as an accessory to the EPS1000 series sinks. The intent is to receive the wastewater from the portable sink. This HDPE plastic tank is not imported.

• Waste-water tank is designed as an accessory to the EPS1000 series sinks
• Tank collects waste water source for the portable sink
• Made of FDA approved high density polyethylene (HDPS) plastic
• 5 Gal. (18 l) capacity
• 63 mm neck finish
• Dimensions: 9.46 in. L x 9.52 in. W x 14.68 in. H
• Not UN rated
• Has a fixed handle
• Tank can be reconditioned and recycled
• Proudly made in the states

BRADLEY WASHFOUNTAIN

• Suitable for heavy duty hand washing
• Air valve metering, infrared activation, or TouchTime® mechanical metering
• Terreon and TerreonRE are resistant to chemicals, stains, burns, and impact
• Accommodates up to 8 users at a time

Bradley 54 in. Bradstone Sem-Circular Classic Washfountain. Heavy duty Bradstone material offers low maintenance and high vandal resistance. Foot control water control. Can accommodate up to 4 users at a time. Operates at water pressure ranges of 20-80 psi.

• 54 in. semi-circular design
• Foot control water activation
• Vandal resistant
• 1.25 Gal. per minute flow rate
• Deep well for heavy duty handwashing
• Pre-assembled bowl and pedestal for ease of installation
• 1-water connection and 1-drain connection

This Academic Group single bowl 17 in. x 25 in. drop-in sink from JUST MANUFACTURING. Seamless die-drawn construction of 18-Gauge type 304 stainless steel. Faucet flange at rear of compartment. Interior and top surfaces polished to a non-porous Hand Blended Just Finish. Fully coated underside insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity. Self-rimming top mount with Grip-Rim Plus stainless steel mounting channels.

• 18-Gauge USA mill certified type 304, stainless steel
• ADA compliant
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Fully coated underside insulated for sound and reduces condensation
• Grip-rim plus with stainless steel mounting channels
• Drain punched #35 centered

Eco Portable Wash-Ware units can be set up anywhere clean hands are needed, indoors or out. The design of the Eco Portable Wash-Ware unit allows for convenient flat-pack shipment with quick and easy setup. This model provides connections to 3/4 in. hoses for both fresh water and waste. The back of this unit is exposed, providing access for the hoses and connections. A Mini Tank Water Heater is supplied to provide tempered water. Casters are included. The single handle gooseneck faucet has a 0.5 GPM flow control.

• Portable hand-wash unit ships unassembled allowing for easy transport and comes ready to assemble
• Cabinet is fabricated of type 304 stainless steel with exposed surfaces polished to a #4 satin finish
• Access to plumbing and storage components is through rear of cabinet or removable front access panel
• Cabinet assembly is provided with a set of square rubber feet
• Countertop includes a marine edge to enable drainage around the rim of the integral trapezoidal lavatory bowl
• Water supply is from an existing plumbed, potable water source with a hose through an electric water heater, with thermostatic mixing valve, to provide tempered water
• Wastewater is collected in a removable wastewater tank
• Handle faucet for manual activation

The Sentry Floor Mounted Circular Washfountain features a reliable push button activated air metering control for easy activation. The unit is easy to clean and highly vandal resistant due to the fact that it is made of heavy 14-Gauge stainless steel. The unit features one water hook up and one waste hook up for ease of installation.

• Push button activated air metering
• Factory tested and preassembled
• 14-Gauge stainless steel
• Highly vandal resistant
• ADA compliant
• Designated a low flow fixture

This Undermount Group ADA compliant single compartment 16 in. x 18 in. undermount sink from Just Manufacturing. Seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces polished to a non-porous Hand Blended Just Finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity.

• 18-Gauge type 304 stainless steel
• ADA compliant
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Fully coated underside
• Polished with a satin blended no. 4 finish, with highlighted bowl rim
• Conforms to ASME/ANSI A112.19.3M

This Academic Group ADA compliant single bowl 17 in. x 25 in. drop-in sink from JUST MANUFACTURING. Seamless die-drawn construction of 18-Gauge type 304 stainless steel. Faucet flange at rear of compartment. Interior and top surfaces polished to a non-porous Hand Blended Just Finish. Fully coated underside insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity. Self-rimming top mount with Grip-Rim Plus stainless steel mounting channels.

• 18-Gauge USA mill certified type 304, stainless steel
• ADA compliant
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Fully coated underside insulated for sound and reduces condensation
• Grip-rim plus with stainless steel mounting channels
• Drain punched #35 centered

HY-G1-TP portable, ENVIRO series hand wash sink, constructed of heavy-duty 16 /18 gauge, type 304 stainless steel. The heavy-duty HY-G1-TP station is self-contained from start to finish including water from storage tanks below, sensor activated soap dispenser, auto dispensed paper towel to be disposed of in the convenient side waste receptacle. These are made for indoor and outdoor use. Our "On the move. . . to the location you need" station comes to life in our all sensor HY-G1-TP unit services child through adult heights. Ideal for school locations such as gymnasiums, classrooms, hallways, cafeterias, outdoor sporting areas, and other locations where accessible water is limited and hands-free cleanliness is a must.

• Stainless steel construction of heavy duty 16/18-Gauge USA mill certified type 304, stainless steel
• Large capacity, single washbasin prevents splash out and offset drain location prevents aerosolization of pathogens
• Hands-free end-to-end hygienic solution includes sensor faucet, soap dispenser, and towel dispenser
• Underdeck TMV and included water heater create a comfortable hand-washing experience wherever needed
• Heavy-duty grab bar handle and EZ Roll locking casters allow for easy positioning - indoors or out
• 120-volt water heater 2 Imp gallons, and 115-volt water pump
• Complete with stowable child step to accommodate users of all ages
• Removable waste and freshwater tanks
• Lockable access door
• ADA Compliant - side reach

Eco Portable Wash-Ware units can be set up anywhere clean hands are needed, indoors or out. The design of the Eco Portable Wash-Ware unit allows for convenient flat-pack shipment with quick and easy setup. This model provides a connection to a 3/4 in. hose for fresh water supply; waste is collected in an onboard 5 Gal. tank. The back of this unit is exposed, providing access for the hose connections and the waste thank. Casters are included. The single handle gooseneck faucet has a 0.5 GPM flow control.

• Portable hand-wash unit ships unassembled allowing for easy transport and comes ready to assemble
• Cabinet is fabricated of type 304 stainless steel with exposed surfaces polished to a #4 satin finish
• Access to plumbing and storage components is through rear of cabinet or removable front access panel
• Cabinet assembly is provided with a set of square rubber feet
• Countertop includes a marine edge to enable drainage around the rim of the integral trapezoidal lavatory bowl
• Water supply is from an existing plumbed, potable water source with a hose
• Wastewater is collected in a removable wastewater tank
• Handle faucet for manual activation

Sentry 36 in. Semi-Circular Stainless Steel Washfountain. This product features a reliable pushbutton activation and meets all ADA requirements. The stainless steel offers high vandal resistance and is easy to clean.

• 36 in. semi-circular bowl size
• Floor mounted
• 14-Gauge type 304 stainless steel with a #4 polish
• Push button activation
• Meets ADA requirements
• Factory tested and ships pre-assembled
• Vandal resistant and easy to clean

This Stylist Group double bowl 19 in. x 33 in. drop-in sink from JUST MANUFACTURING. Seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces satin blended No. 4 finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity. Self-rimming top mount with Grip-Rim Plus with stainless steel mounting channels.

• 18-Gauge USA mill certified type 304, stainless steel
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Exposed surfaces polished with hand-blended just finish
• Fully coated underside insulated for sound and reduces condensation
• Grip-rim plus with stainless steel mounting channels
• Drain punched #35 centered

Bradley Classic Washfountain is designed for heavy duty hand washing. It features a 54 in. corner bowl and pushbutton activation. This unit can accommodate up to 3 users with total water usage of 5-Gal. per minute. This model is ADA compliant with high vandal resistance.

• Reliable push button control activation
• Floor mounted
• 54 in. stainless steel corner bowl size
• Highly vandal resistant
• ADA compliant
• cUPC approval
• 14-Gauge stainless steel
• 4-polished finish
• Can be wall mounted or floor mounted

This Undermount Group ADA compliant single compartment 16 in. x 20 in. undermount sink from Just Manufacturing. Seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces polished to a non-porous Hand Blended Just Finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity.

• 18-Gauge type 304 stainless steel
• ADA compliant
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Fully coated underside
• Polished with a satin blended no. 4 finish, with highlighted bowl rim
• Conforms to ASME/ANSI A112.19.3M

This Stylist Group single deep bowl 19" x 21" drop-in sink with rear ledge, from Just Manufacturing, is 100% Made in USA. It is a seamless die-drawn construction of 18 gauge type 304 stainless steel. Interior and top surfaces satin blended No. 4 finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4" radius corners provides greater capacity. Self-rimming top mount with Grip-Rim Plus with stainless steel mounting channels.

• 18-Gauge type 304-stainless steel
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Polished with a satin blended number 4-finish with highlighted bowl rim
• Fully coated underside
• Grip-rim plus self-rimming 300-series stainless steel mounting channel
• Conforms to ASME/ANSI A112.19.3M