Commercial & Specialty Sinks
This EPS back splash is designed as an accessory to the EPS1000 series sinks. It provides a backdrop to keep hand washing soap and paper towels within easy reach. Installation is simple to any EPS1000 series sink.
- Splash guard includes mounting hardware
- Helps to contain hand washing activity and keeps hand washing soap and paper towels within easy reach
- Splash guard is constructed of sturdy 18-Gauge, 304 type stainless steel and finished on all sides to a #4 satin finish
- Paper holder is constructed of sturdy 16-Gauge, 304 type stainless steel with the interior sand blasted and the exterior with a #4 satin finish
- Each bay holds a half ream of 10-1/4 in. x 3-5/8 in. folded sheets of C-fold paper towels
- Soap caddy is designed to securely hold a pump-style soap bottle of the user's choice
- 2-piece soap caddy is constructed of sturdy 16-Gauge, 304 type stainless steel, finished to a #4 satin finish
- Mounting hardware is included for the splash guard, paper holder and soap caddy
- Unit is easily mounted to the rear and sides of any EPS1000 series sink
- All sharp edges are broken
These sinks are designed to provide hand washing capabilities in areas not normally equipped for it. Portable Wash-Ware units can be set up anywhere-inside or out. This model provides connections to 3/4 in. hoses for both freshwater and waste. The single handle gooseneck faucet has a 0.5 GPM flow control.
- Swivel casters for smooth transit, roll it where you need it
- Integrated attachment points for paper towel holder, trash can accessories and soap holders
- Hose models provide convenient hand-washing anywhere a hose can reach
- Hose connections in the back of the unit
- Handle faucet for manual activation
- Faucet has 0.5 GPM flow control
The Sentry Floor Mounted Circular Washfountain features a reliable push button activated air metering control for easy activation. The unit is easy to clean and highly vandal resistant due to the fact that it is made of heavy 14-Gauge stainless steel. The unit features one water hook up and one waste hook up for ease of installation.
- Push button activated air metering
- Factory tested and preassembled
- 14-Gauge stainless steel
- Highly vandal resistant
- ADA compliant
- Designated a low flow fixture
This Undermount Group ADA compliant single compartment 16 in. x 18 in. undermount sink from Just Manufacturing. Seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces polished to a non-porous Hand Blended Just Finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity.
- 18-Gauge type 304 stainless steel
- ADA compliant
- Seamless die-drawn construction
- Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
- Fully coated underside
- Polished with a satin blended no. 4 finish, with highlighted bowl rim
- Conforms to ASME/ANSI A112.19.3M
This C-Fold paper towel dispenser is designed as an accessory to the PS1000 Series sinks. It puts paper towels close at hand. The towels are secure, replacement is easy.
- Triple C-fold paper holder includes mounting hardware
- Puts the towels close to the hand washing activity
- Open bay design keeps the towels secure and easy to refill
- Each bay holds a half ream of 10-1/4 in. x 3-5/8 in. folded sheets of C-fold paper towels
- Easily mounted to the rear and sides of any PS1000 series sink
- Mounting hardware allows the paper holder to be removed for cleaning
- Constructed of sturdy 16-Gauge, 304 type stainless steel
- Exterior is a #4 satin finish
- Interior is sand blasted
- All sharp edges are broken
This Stylist Group single bowl 18 in. x 15 in. drop-in sink with rear ledge, from JUST MANUFACTURING. It is a seamless die-drawn construction of 18-Gauge type 304-stainless steel. Interior and top surfaces satin blended No. 4 finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity. Self-rimming top mount with Grip-Rim Plus with stainless steel mounting channels.
- 18-Gauge type 304-stainless steel
- Seamless die-drawn construction
- Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
- Polished with a satin blended number 4-finish with highlighted bowl rim
- Fully coated underside
- Grip-rim plus self-rimming 300-series stainless steel mounting channel
- Conforms to ASME/ANSI A112.19.3M
Deluxe Stainless Portable Sinks are designed to provide hand washing capabilities in areas not normally equipped for it. Portable Wash-Ware units can be set up anywhere--inside or out. This model provides a connection to 3/4 in. hose for fresh water. Access for the hose is provided behind the unit. The waste is collected in an onboard 6 Gal. tank. The single handle gooseneck faucet has a 0.5 GPM flow control.
- Swivel casters for smooth transit, roll it where you need it
- Integrated attachment points for paper towel holder, trash can accessories and soap holders
- Integrated ball-valve for easy shutoff when draining waste tank (not available on pump models)
- Hose models provide convenient hand-washing anywhere a hose can reach
- Handle faucet for manual activation
- Faucet has gooseneck spout
This Stylist Group single bowl 17.5 in. x 19 in. drop-in sink with rear ledge, from JUST MANUFACTURING. It is a seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces satin blended No. 4 finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity. Self-rimming top mount with Grip-Rim Plus with stainless steel mounting channels.
- 18-Gauge type 304 stainless steel
- Seamless die-drawn construction
- Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
- Polished with a satin blended number 4-finish with highlighted bowl rim
- Fully coated underside
- Grip-rim plus self-rimming 300 series stainless steel mounting channel
- Conforms to ASME/ANSI A112.19.3M
Sentry 36 in. Semi-Circular Stainless Steel Washfountain. This product features a reliable pushbutton activation and meets all ADA requirements. The stainless steel offers high vandal resistance and is easy to clean.
- 36 in. semi-circular bowl size
- Floor mounted
- 14-Gauge type 304 stainless steel with a #4 polish
- Push button activation
- Meets ADA requirements
- Factory tested and ships pre-assembled
- Vandal resistant and easy to clean
This Stylist Group single deep bowl 19" x 21" drop-in sink with rear ledge, from Just Manufacturing, is 100% Made in USA. It is a seamless die-drawn construction of 18 gauge type 304 stainless steel. Interior and top surfaces satin blended No. 4 finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4" radius corners provides greater capacity. Self-rimming top mount with Grip-Rim Plus with stainless steel mounting channels.
- 18-Gauge type 304-stainless steel
- Seamless die-drawn construction
- Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
- Polished with a satin blended number 4-finish with highlighted bowl rim
- Fully coated underside
- Grip-rim plus self-rimming 300-series stainless steel mounting channel
- Conforms to ASME/ANSI A112.19.3M
HY-G1-TP portable, ENVIRO series hand wash sink, constructed of heavy-duty 16 /18 gauge, type 304 stainless steel. The heavy-duty HY-G1-TP station is self-contained from start to finish including water from storage tanks below, sensor activated soap dispenser, auto dispensed paper towel to be disposed of in the convenient side waste receptacle. These are made for indoor and outdoor use. Our "On the move. . . to the location you need" station comes to life in our all sensor HY-G1-TP unit services child through adult heights. Ideal for school locations such as gymnasiums, classrooms, hallways, cafeterias, outdoor sporting areas, and other locations where accessible water is limited and hands-free cleanliness is a must.
- Stainless steel construction of heavy duty 16/18-Gauge USA mill certified type 304, stainless steel
- Large capacity, single washbasin prevents splash out and offset drain location prevents aerosolization of pathogens
- Hands-free end-to-end hygienic solution includes sensor faucet, soap dispenser, and towel dispenser
- Underdeck TMV and included water heater create a comfortable hand-washing experience wherever needed
- Heavy-duty grab bar handle and EZ Roll locking casters allow for easy positioning - indoors or out
- 120-volt water heater 2 Imp gallons, and 115-volt water pump
- Complete with stowable child step to accommodate users of all ages
- Removable waste and freshwater tanks
- Lockable access door
- ADA Compliant - side reach
This Undermount Group ADA compliant single compartment 18 in. x 18 in. undermount sink from Just Manufacturing. Seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces polished to a non-porous Hand Blended Just Finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity.
- 18-Gauge type 304 stainless steel
- ADA compliant
- Seamless die-drawn construction
- Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
- Fully coated underside
- Polished with a satin blended number 4 finish, with highlighted bowl rim
- Conforms to ASME/ANSI A112.19.3M
This Stylist Group single bowl 18 in. x 15 in. drop-in sink with rear ledge, from JUST MANUFACTURING. It is a seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces satin blended No. 4 finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity. Self-rimming top mount with Grip-Rim Plus with stainless steel mounting channels.
- 18-Gauge type 304 stainless steel
- Seamless die-drawn construction
- Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
- Polished with a satin blended number 4 finish with highlighted bowl rim
- Fully coated underside
- Grip-rim plus self-rimming 300 series stainless steel mounting channel
- Conforms to ASME/ANSI A112.19.3M
Murdock Model GWC75 series is a round wall mounted, vandal resistant Hand Wash. It has a 16-Gauge type 304 stainless steel bowl mounted into a 12-Gauge, heavy-duty stainless steel support arm. The finish is a green powder coated. Unit is activated by a 9-Volt DC Hands Free Sensor Operated Faucet with 0.5 GPM Laminar flow outlet to minimize splash. Hand Wash complies with ANSI A117.1, Public Law 111-380 (NO-LEAD), CHSC 116875. Fixture meets ADA Standing Person, and ADA Child requirements when mounted appropriately.
- Both child or adult ADA compliant (when properly installed)
- Resistant to sunlight, heat, moisture and wear
- Wall-mounted
- Barrier-free
- Stainless steel construction for durability and easy cleaning
- Maintenance-friendly design
- Hands-free, battery-operated sensor faucet to reduce the potential spread of bacteria
- Laminar flow to minimize splash and provide the recommended flow for sufficient hand washing
- Cap over drain to reduce airborne germs
This 5 Gal. fresh-water tank is designed as an accessory to the EPS1000 series sinks. It provides fresh water source for the portable sink. This HDPE plastic tank is not imported.
- Fresh-water tank is designed as an accessory to the PS1000 series portable wash-ware sinks
- Tank provides fresh water source for the portable sink
- Made of FDA approved high density polyethylene (HDPS) plastic
- 5 Gal. (18 l) capacity
- 63 mm neck finish
- Dimensions: 9.46 in. L x 9.52 in. W x 14.68 in. H
- Not UN rated
- Has a fixed handle
- Tank can be reconditioned and recycled
- Proudly made in the states
This Stylist Group ADA compliant single bowl 22 in. x 25 in. drop-in sink with rear ledge, from JUST MANUFACTURING. It is a seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces satin blended No. 4 finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity. Self-rimming top mount with Grip-Rim Plus with stainless steel mounting channels.
- 18-Gauge type 304 stainless steel
- ADA compliant
- Seamless die-drawn construction
- Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
- Fully coated underside
- Grip-rim plus self-rimming 300 series stainless steel mounting channel
- Conforms to ASME/ANSI A112.19.3M
This deluxe splash guard is designed as an accessory to the PS1000 series sinks. It provides a backdrop to keep hand washing soap and paper towels within easy reach. Installation is simple to any PS1000 series sink.
- Splash guard includes mounting hardware
- Helps to contain hand washing activity and keeps hand washing soap and paper towels within easy reach
- Splash guard is constructed of sturdy 18-Gauge, 304 type stainless steel and finished on all sides to a #4 satin finish
- Paper holder is constructed of sturdy 16-Gauge, 304 type stainless steel with the interior sand blasted and the exterior with a #4 satin finish
- Each bay holds a half ream of 10-1/4 in. x 3-5/8 in. folded sheets of C-fold paper towels
- Soap caddy is designed to securely hold a pump-style soap bottle of the user's choice
- 2-piece soap caddy is constructed of sturdy 16-Gauge, 304 type stainless steel, finished to a #4 satin finish
- Mounting hardware is included for the splash guard, paper holder and soap caddy
- Unit is easily mounted to the rear and sides of any PS1000 series sink
- All sharp edges are broken
36 in. Bradley Classic Bradstone Washfountain. The unit comes pre-assembled bowl and pedestal. Can accommodate up to 5-users at a time using only 2 Gal. per minute of water.
- 36 in. Bradstone resist stains and damage
- Pre-assembled bowl and pedestal
- 1-water supply hook up and one waste hookup
- Foot control for easy activation
- Operates at water pressure of 20-80 psi
- Highly vandal resistant
This Undermount Group single compartment 18 in. x 18 in. undermount sink from JUST MANUFACTURING. Seamless die-drawn construction of 18-Gauge type 304-stainless steel. Interior and top surfaces polished to a non-porous Hand Blended Just Finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity.
- 18-Gauge type 304-stainless steel
- Seamless die-drawn construction
- Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
- Polished with a satin blended number 4-finish with highlighted bowl rim
- Fully coated underside
- Drain punch J-35 drain
- Conforms to ASME/ANSI A112.19.3M
Bradley Sentry Corner Shallow Bowl Washfountain. Features a generous 54 in. bowl size. Factory tested, pre-assembled and floor mounted for ease of installation. Made with 304 Stainless Steel. Push button activation. Single water connection and drain connection helps with installation.
- heavy duty stainless steel construction for vandal resistance
- Generous 54 in. Bowl size
- Air hand activation
- Meets ADA requirements
- All moving parts safely concealed within the wash fountain
- Comes standard with stainless steel supply tubes and a Bradley navigator thermostatic mixing valve to safeguard against hot water scalding
Bradley Classic 54 in. Stainless Semi-Circular Washfountain. Foot control activation for hands free use. Features a one piece 14-Gauge stainless steel bowl with a polished finish. Can accommodate up to 4-users at a 3 Gal. per minute flow rate.
- 54 in. semi-circular bowl design
- Foot control activation
- 14-Gauge stainless steel
- Operates at a 20-80 psi water pressure
- 1-water connection
- 9 in. bowl depth
This 6.5 Gal. fresh-water tank is designed as an accessory to the EPS1000 series sinks. It provides fresh water source for the portable sink. This HDPE plastic tank is not imported.
- Fresh-water tank is designed as an accessory to the EPS1000 series sinks
- Tank provides fresh water source for the portable sink
- Made of FDA approved high density polyethylene (HDPS) plastic
- Durable, rust and dent-proof
- 6.5 Gal. (24 l) capacity
- Dimensions: 14-1/2 in. L x 8-1/2 in. W x 18-1/2 in. H
- Not UN rated
- Convenient back and top handles for easier pouring
- Spout is self-venting
- Tank can be recycled
This Undermount Group single compartment 16 in. x 16 in. undermount sink from JUST MANUFACTURING. Seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces polished to a non-porous Hand Blended Just Finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity.
- 18-Gauge type 304 stainless steel
- Seamless die-drawn construction
- Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
- Polished with a satin blended number 4-finish with highlighted bowl rim
- Fully coated underside
- Drain punch J-35 drain
- Conforms to ASME/ANSI A112.19.3M
