SharkBite Push-to-connect stop valves are the fastest way to connect to PEX, copper, CPVC, or PE-RT stubouts. These valves control the flow of water to plumbing fixtures including faucets, toilets, dishwashers, washing machines, and ice makers. Braided supply lines, PEX, or copper tubing can be used to connect the outlet of the valve to plumbing fixtures. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings and valves can be easily changed or reused Designed with stainless steel gripping teeth for a secure connection, chlorine-resistant O-ring for a long-lasting seal.

• Works on wet lines, rotatable after installation, and removable
• Push-to-connect fittings are ideal for installation in tight spaces
• Rated to 160 degrees Fahrenheit and 125 PSI
• Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
• Chrome-plated exterior body
• Low-lead DZR corrosion-resistant brass body
• Code approved, IAPMO listed, for details see Specifications
• 2-Year warranty when used with PEX, copper, CPVC & PE-RT pipe
• Meets all UPC, IPC and cUPC requirements
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
• 1/2 in. pipe insertion depth = 15/16 in.

1/2 in. Nom Compression Inlet x 3/8 in. O.D. Compression x 3/8 in. O.D. Compression Dual Outlet Multi-Turn Valve controls water flow to household plumbing fixtures. The dual outlet allows two independent supply lines to be attached to a single valve. Ideal for adding dishwashers, ice makers, water filters and instant hot water dispensers to existing water supply. With a few turns of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.

• Machined one-piece brass body provides strength, durability and long-lasting performance
• For use in potable water distribution systems; not intended for recirculating water systems that produce continuous use temperatures above 115 degree F; for those applications, use our KT series ball stops
• Multi-turn operation means water flow control with only a few turns of the handle
• Oval-knurled handle provides a secure grip for on/off operation
• Easy-to-remove handle protects against accidental operation during rough-ins
• 1-piece shut-off mechanism provides smooth on-off operation
• IAPMO ASME A112.18.1/CSA B125.1
• Designed, machined and assembled in the USA

1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Forged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shutoff and re-opening
• IAPMO and CSA Listed
• Certified to ANSI / NSF standard 61-9 Annex G
• Manufactured in an ISO accredited facility

1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Forged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shut-off and re-opening
• IAPMO and CSA listed
• Certified to ANSI/NSF standard 61-9 annex G
• Manufactured in an ISO accredited facility

1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Forged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shut-off and re-opening
• IAPMO and CSA listed
• Certified to ANSI/NSF standard 61-9 annex G
• Manufactured in an ISO accredited facility

SharkBite Push-to-connect stop valves are the fastest way to connect to PEX, copper, CPVC, or PE-RT stubouts. These valves control the flow of water to plumbing fixtures including faucets, toilets, dishwashers, washing machines, and ice makers. Braided supply lines, PEX, or copper tubing can be used to connect the outlet of the valve to plumbing fixtures. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings and valves can be easily changed or reused Designed with stainless steel gripping teeth for a secure connection, chlorine-resistant O-ring for a long-lasting seal.

• Works on wet lines, rotatable after installation, and removable
• Push-to-connect fittings are ideal for installation in tight spaces
• Rated to 160 degrees Fahrenheit and 125 PSI
• Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
• Chrome-plated exterior body
• Low-lead DZR corrosion-resistant brass body
• Code approved, IAPMO listed, for details see Specifications
• 2-Year warranty when used with PEX, copper, CPVC & PE-RT pipe
• Meets all UPC, IPC and cUPC requirements
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)

BrassCraft 1/2 in. FIP Inlet x 3/8 in. OD Compression Outlet Multi-Turn Angle Valve With Brass Stem controls water flow to household plumbing fixtures faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the wall. With a few turns of the valve handle, you are able to stop or start the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.

• Easy-to-remove handle protects against accidental operation during rough-ins
• Compatible with iron pipe
• Machined, one-piece body construction for strength, durability and long-lasting performance
• Features brass stem
• Multi-turn operation means water flow control with only a few turns of the handle
• Oval-knurled handle provides a secure grip for ON/OFF operation
• Chrome-plated brass
• Temperature rating: 40 degree to 160 degree F
• Pressure rating: 125 psi maximum
• No-lead certified
• IAPMO and CSA listed to ASME A112.18.1 / CSA B125.1

BrassCraft 1/2 In. Nom Sweat x 3/8 In. OD Compression Outlet Multi-Turn Angle Valve controls water flow to household plumbing fixtures faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the wall. With a few turns of the valve handle, you are able to stop or start the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.

• Compatible with Copper
• Machined, one-piece body construction for strength, durability and long-lasting performance
• Easy-to-remove handle protects against accidental operation during rough-ins
• Easy-to-remove handle protects against accidental operation during rough-ins
• Multi-turn operation means water flow control with only a few turns of the handle
• Oval-knurled handle provides a secure grip for on/off operation
• Rough brass
• Temperature rating: 40 to 140 F
• Pressure rating: 125 psi maximum
• No-Lead Certified
• IAPMO and CSA listed to ASME A112.18.1 / CSA B125.1
• Designed, Machined and Assembled in the USA

BrassCraft Toilet Supply Kit everything you need to connect your water supply to your toilet. Components include: (1) 1/2 in. Nominal Sweat inlet x 3/8 in. O.D. Compression outlet multi-turn angle water shut-off valve with 5 in. Sweat Extension Tube (1) 3/8 in. O.D. x 12 in. L copper riser and (1) bell flange. An angle valve is most often used when the water pipe enters the room from the wall. 5 in. extension tube slides over existing 1/2 in. nominal copper water pipe, sweat connection. May be cut to required length using a tube cutter. All components are chrome-plated for a clean professional appearance.

• Kit includes: (1) 1/2 in. nominal sweat x 3/8 in. O.D. compression multi-turn angle valve with 5 in. extension tube, (1) 12 in. toilet riser and (1) bell escutcheon
• Valve compatible with 1/2 in. nominal (5/8 in. O.D.) copper pipe
• 5 in. extension tube slides over existing 1/2 in. nominal copper pipe, sweat connection, may be cut to required length
• Valve has a machined, 1-piece brass body for strength, durability and long-lasting performance
• Valve controls water flow with a few turns of the handle
• 3/8 in. O.D. x 12 in. riser features standard gasket nosepiece
• Riser is cut-to-length for flexible fit and clean, professional appearance
• Chrome finish
• For use in potable water distribution systems in accessible locations only
• Temperature rating: 40 degree F to 140 degree F
• Pressure rating: 125 psi maximum
• No-lead certified
• IAPMO and CSA listed to ASME A112.18.1/CSA B125.1

BrassCraft 1/2 In. Nom Compression Inlet x 3/8 In. OD Compression Outlet 1/4-Turn Angle Ball Valve features lockshield and a loose key to help prevent tampering and accidental activation of water flow. Used to control water flow to household plumbing fixtures, this angle valve is most often used where the water pipe enters the room from the wall. With a quarter turn of the loose key, you are able to start or stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.

• Contractor pack includes 5 individually trayed valves
• Compatible with Copper or PEX (PEX installations require a stainless steel tube insert)
• Smooth, quarter-turn operation. On/Off flow control with a 90 degree turn of the loose key handle
• Brass ball ensures smooth operation without freeze-ups even after long periods without use
• Machined body provides strength, durability and long-lasting performance
• Lockshield and Loose key help protect against tampering and accidental activation
• Chrome-plated brass
• Temperature rating: 40 to 140 F
• Pressure rating: 125 psi maximum
• No-Lead Certified
• IAPMO and CSA listed to ASME A112.18.1 / CSA B125.1
• Designed, Machined and Assembled in the USA

BrassCraft 1/2 In. FIP Inlet x 3/8 In. OD Compression Outlet Multi-Turn Angle Valve, With Lockshield, Loose Key & Stuffing Box controls water flow to household plumbing fixtures faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the wall. With a few turns of the key, you are able to stop or start the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.

• Compatible with Iron Pipe
• Machined, one-piece body construction for strength, durability and long-lasting performance
• Lockshield and loose key help protect against tampering and accidental activation
• Lockshield and loose key help protect against tampering and accidental activation
• Features a stuffing box
• Multi-turn operation means water flow control with only a few turns of the key
• Chrome-plated brass
• Temperature rating: 40 degree to 160 degree F
• Pressure rating: 125 psi maximum
• No-Lead Certified
• IAPMO and CSA listed to ASME A112.18.1 / CSA B125.1
• Designed, Machined and Assembled in the USA