• Rheem Commercial Light Duty 80 Gallon 277-Volt 12 kW Electric Water Heater
• Rheem Commercial Light Duty 80 Gallon 277-Volt 12 kW Electric Water Heater
• Simultaneous Wiring, Single Phase
• Energy Efficient Design Reduces Energy Consumption And Standby Heat Loss With 2-1/2 In. Of Rigid Polyurethane Foam Insulation
• Automatic Temperature Control With Surface Mounted Thermostat Automatically Cycles On And Off To Maintain Desired Water Temperature
• Etary Protective Steel Formulation With A Unique Coat Of High Temperature Porcelain Enamel
• Design Maximizes Corrosion Resistance And Life Of Anode Rod
• Patented Corrosion-Resistant Elements Include Double Layer Of Magnesium Oxide And Copper To Resist Corrosion
• Factory Installed Brass Drain Valve Allows For Faster Draining And Servicing
• These Units Are Suited For A Wide Variety Of Applications Such As Retail Stores And Small Offices
• Available In 65, 80 And 119.9-Gallon Models
• 6-Year Limited Tank Warranty For Commercial Applications
• MFG# 638331

• Rheem Marathon Eclipse Light-Duty non-metallic electric water heaters are designed for harsh environments and have the 10 year limited warranty to back it up. One of the most durable electric water heaters available Marathon Eclipse is constructed of multiple layers of filament-wound fiberglass that give the tank unmatched strength and eliminates the need for an anode rod. The polyethylene outer shell resists dents scratches and salt air. All models are field convertible to meet any Light-Duty hot water application need. Easily convert standard models from simultaneous to non-simultaneous and single phase to 3 phase. Marathon Eclipse is available in 75 Gal. 85 Gal. and 105 Gal. capacities.
• Marathon Eclipse 85 Gal. 277V 12kW Non-Metallic Electric Water Heater
• Terminal Block Enables Easy Field Level Conversion For A Variety Of Light-Duty Applications
• Easy To Convert Standard Models From Simultaneous To Non-Simultaneous, Single Phase To 3 Phase
• Factory Shipped In Simultaneous Configuration
• Non-Metallic, Seamless, Blow-Molded Polybutene Inner Tank Protects Against Rust And Corrosion
• All Plastic Tank Eliminates The Need For An Anode Rod
• Tough Molded Polyethylene Outer Shell Resists Dents, Scratches And Salt Air
• Recessed Brass Drain Valve Is Out The Way Of Brooms And Scrubbers
• Titanium Upper And Lower Elements For Superior Resistance To Lime Build-Up
• Polyurethane Insulation Reduces Energy Consumption And Standby Heat Loss
• Lightweight Tank Is Easier To Maneuver And Position
• Designed For Harsh Environments And Have The 10 Year Limited Warranty To Back It Up
• Constructed Of Multiple Layers Of Filament-Wound Fiberglass That Give The Tank Unmatched Strength And Eliminates The Need For An Anode Rod
• Field Convertible To Meet Any Light-Duty Hot Water Application Need
• MFG# MELD85-TB 277 VOLT 12 KW

• Rheem Marathon Eclipse Light-Duty non-metallic electric water heaters are designed for harsh environments and have the 10 year limited warranty to back it up. One of the most durable electric water heaters available Marathon Eclipse is constructed of multiple layers of filament-wound fiberglass that give the tank unmatched strength and eliminates the need for an anode rod. The polyethylene outer shell resists dents scratches and salt air. All models are field convertible to meet any Light-Duty hot water application need. Easily convert standard models from simultaneous to non-simultaneous and single phase to 3 phase. Marathon Eclipse is available in 75 Gal. 85 Gal. and 105 Gal. capacities.
• Rheem Marathon Eclipse Lt-Dty 75 Gal. Comm 277-V 12Kw Non Metallic Elec Wtr Htr
• Polyurethane Insulation Reduces Energy Consumption And Standby Heat Loss
• Titanium Upper And Lower Elements For Superior Resistance To Lime Build-Up
• Recessed Brass Drain Valve Is Out The Way Of Brooms And Scrubbers
• Tough Molded Polyethylene Outer Shell Resists Dents, Scratches And Salt Air
• All Plastic Tank Eliminates The Need For An Anode Rod
• Non-Metallic, Seamless, Blow-Molded Polybutene Inner Tank Protects Against Rust And Corrosion
• Factory Shipped In Simultaneous Configuration
• Easy To Convert Standard Models From Simultaneous To Non-Simultaneous, Single Phase To 3 Phase
• Terminal Block Enables Easy Field Level Conversion For A Variety Of Light-Duty Applications
• Lightweight Tank Is Easier To Maneuver And Position
• Designed For Harsh Environments And Have The 10 Year Limited Warranty To Back It Up
• C
• Bowl Shaped Tank Bottom Allows Complete Sediment Draining
• Temperature And Pressure Relief Valve And Factory Installed Vacuum Relief Valve
• MFG# MELD75-TB 277 VOLT 12 KW

A. O. Smith 80 Gallon Tall Light Service Commercial Electric Water Heater. DynaClean Diffuser System Reduces Sediment Buildup Extending Tank Life. Blue Diamond Glass Lining Provides Protection Against Leaks. CoreGard Anode Rod Provides Industry Leading Technology And Tank Protection. Two 4.5 kW Zinc Plated Copper Elements. Thermostat Adjustable From 120degree To 181degree F With A Manual Reset High Temperature Cut Off. Full Flow Tamper Resistant Brass Drain Valve. Mfg #100227965

• DynaClean Diffuser System Reduces Sediment Buildup Extending Tank Life
• Blue Diamond Glass Lining Provides Protection Against Leaks
• CoreGard Anode Rod Provides Industry Leading Technology And Tank Protection
• Two 4.5 kW Zinc Plated Copper Elements

• Rheem Marathon Eclipse Light-Duty non-metallic electric water heaters are designed for harsh environments and have the 10 year limited warranty to back it up. One of the most durable electric water heaters available Marathon Eclipse is constructed of multiple layers of filament-wound fiberglass that give the tank unmatched strength and eliminates the need for an anode rod. The polyethylene outer shell resists dents scratches and salt air. All models are field convertible to meet any Light-Duty hot water application need. Easily convert standard models from simultaneous to non-simultaneous and single phase to 3 phase. Marathon Eclipse is available in 75 Gal. 85 Gal. and 105 Gal. capacities.
• Marathon Eclipse 105 Gal. 12kW 277V Non-Metallic Electric Water Heater
• Terminal Block Enables Easy Field Level Conversion For A Variety Of Light-Duty Applications
• Easy To Convert Standard Models From Simultaneous To Non-Simultaneous, Single Phase To 3 Phase
• Factory Shipped In Simultaneous Configuration
• Non-Metallic, Seamless, Blow-Molded Polybutene Inner Tank Protects Against Rust And Corrosion
• All Plastic Tank Eliminates The Need For An Anode Rod
• Tough Molded Polyethylene Outer Shell Resists Dents, Scratches And Salt Air
• Recessed Brass Drain Valve Is Out The Way Of Brooms And Scrubbers
• Titanium Upper And Lower Elements For Superior Resistance To Lime Build-Up
• Polyurethane Insulation Reduces Energy Consumption And Standby Heat Loss
• Lightweight Tank Is Easier To Maneuver And Position
• Designed For Harsh Environments And Have The 10 Year Limited Warranty To Back It Up
• Pipe Wrap Kit Included To Achieve Maximum Energy Savings
• Bowl Shaped Tank Bottom Allows Complete Sediment Draining
•  
• MFG# MELD105-TB 277 VOLT 12 KW

LavAdvantage is a thermostatic point-of-use Commercial Electric Tankless water heater for handwashing and other low flow applications. With 3/8 in. compression fittings, LavAdvantage is easy to install and use, and has the industrys lowest activation with 0.2 GPM turn on flow. Other features include: silent operation, field adjustable set point, dry-fire protection on initial start-up, and active energy management with power modulating controls. The SPEX2412T is 2.4 kW and requires 120-Volt.

• Industry's lowest activation with 0.2 GPM turn on flow
• Active energy management with power modulating controls
• Microprocessor temperature control with digital display for thermostatic accuracy +/- 1 degree F
• Field adjustable set point range between 70 degree -140 degree F, factory set at 120 degree F
• Silent operation
• Mounts in any orientation
• SafeStart technology engages upon installation to help protect against dry-fire occurrence
• Accessible diagnostic feature displays error codes
• Endless hot water
• Installs directly at the point of use

Rheem Commercial Heavy-Duty Electric Water Heaters are suitable for general commercial hot water applications and are also ideal for point-of-use installations. A single unit can be used as a booster heater to satisfy the hot water requirements of commercial dishwashers. A single temperature storage unit, when installed with a mixing valve, will supply two temperatures in food service establishments.

• System sentinel diagnostics identifies a non-operating element
• Long life tank design: proprietary steel formulation with high temperature porcelain enamel to maximize corrosion resistance resulting in a superior tank design
• Minimum distance to combustibles is 0 in. from jacket and 18 in. from access door
• Control box is located at the front of unit for easy wiring during installation with multiple knockout holes to accommodate a variety of conduit sizes
• Factory wired 3-phase, approved for field conversion to single phase
• Screw-in stainless steel elements that resist burn out and corrosion
• Thick foam insulation for minimal standby heat loss
• 2-anode rods are installed to ensure long life and corrosion resistance
• Full port, full flow brass drain valve reduces time to drain and service tank
• Factory installed temperature and pressure relief valve

• Rheem Commercial point-of-use POU water heaters are well-suited for a wide variety of applications. They are ideally suited for installation in retail stores public restrooms rehab centers office washrooms kitchen and mop or bar sinks. POU water heaters are small enough to fit in limited spaces under counters mop sinks cabinets or any remote area where modest quantities of hot water are required. Since "point-of-use" water heaters are installed very near the location where hot water is used less heat is lost between the tank and the tap. In instances where a centralized water heater is located a long distance from the hot water tap a commercial point-of-use model installed near the tap is often used to boost the water temperature and reduce wait times for hot water. Installation and maintenance are simplified with side water connects and power connections located and accessible from the front.
• Rheem 20 Gal. 277-Volt 4.5Kw Electric Tank Water Heater
• Long Life Heating Elements: Patented Resistor Elements Designed With A Specially Treated Double Layer Of Magnesium Oxide And Copper To Resist Corrosion
• Proprietary Steel Formulation With A Unique Coat Of High Temperature Porcelain Enamel Maximizes Corrosion Resistance
• Rigid Polyurethane Foam Insulation Provides Superior Insulating Qualities Resulting In Reduced Operating Costs
• Premium Grade Anode Rod Provides Advanced Technology And Equalizes Aggressive Water Action
• Surface Mounted Thermostat Automatically Cycles On And Off To Maintain The Water Temperature At A Desired Preset Level
• Temperature Limiting Control Automatically And Safely Cuts Off The Power In The Unlikely Event That The Water Temperature Exceeds 190 Degree F
• Certified For 150 Psi Maximum Working Pressure
• All Models Are Single Phase
• Factory Installed Temperature And Pressure Relief Valve
• 2-1/2 Gal. Model Comes Standard With Wall Mounting Kit
• MFG# 370903

• Rheem Point Of Use 10 Gallon 120V 2Kw 1 Phase Electric Tank Water Heater. Factory Installed Temperature And Pressure Relief Valve. All Models Are Single Phase. Certified For 150 Psi Maximum Working Pressure. Temperature Limiting Control Automatically And Safely Cuts Off The Power In The Unlikely Event That The Water Temperature Exceeds 190 Degree F. Surface Mounted Thermostat Automatically Cycles On And Off To Maintain The Water Temperature At A Desired Preset Level. Premium Grade Anode Rod Provides Advanced Technology And Equalizes Aggressive Water Action. Rigid Polyurethane Foam Insulation Provides Superior Insulating Qualities Resulting In Reduced Operating Costs. Proprietary Steel Formulation With A Unique Coat Of High Temperature Porcelain Enamel Maximizes Corrosion Resistance. Long Life Heating Elements Patented Resistor Elements Designed With A Specially Treated Double Layer Of Magnesium Oxide And Copper To Resist Corrosion. 2-1/2 Gallon Model Comes Standard With Wall Mounting Kit. 3-Year Limited Tank Warranty. These units are suited for a wide variety of applications and small enough for installation in limited spaces where modest quantities of hot water are required. Proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion resistance of the tank. Mfg #EGSP10 120 VOLT 2KW POU
• Rheem Point Of Use 10 Gallon 120V 2Kw 1 Phase Electric Tank Water Heater
• Factory Installed Temperature And Pressure Relief Valve
• All Models Are Single Phase
• Certified For 150 Psi Maximum Working Pressure
• Temperature Limiting Control Automatically And Safely Cuts Off The Power In The Unlikely Event That The Water Temperature Exceeds 190 Degree F
• Surface Mounted Thermostat Automatically Cycles On And Off To Maintain The Water Temperature At A Desired Preset Level
• Premium Grade Anode Rod Provides Advanced Technology And Equalizes Aggressive Water Action
• Rigid Polyurethane Foam Insulation Provides Superior Insulating Qualities Resulting In Reduced Operating Costs
• Proprietary Steel Formulation With A Unique Coat Of High Temperature Porcelain Enamel Maximizes Corrosion Resistance
• Long Life Heating Elements: Patented Resistor Elements Designed With A Specially Treated Double Layer Of Magnesium Oxide And Copper To Resist Corrosion
• 2-1/2 Gallon Model Comes Standard With Wall Mounting Kit
• 3-Year Limited Tank Warranty
• These Units Are Suited For A Wide Variety Of Applications And Small Enough For Installation In Limited Spaces Where Modest Quantities Of Hot Water Are Required
• Proprietary Steel Formulation With A Unique Coat Of High Temperature Porcelain Enamel Maximizes Corrosion Resistance Of The Tank
• MFG# EGSP10 120 VOLT 2KW POU

• Commercial Light Duty 66 G 277-Volt 12 kW Electric Water Heater. Simultaneous Wiring Single Phase. Energy efficient design reduces energy consumption and standby heat loss with 2-1/2 in. of rigid polyurethane foam insulation. Automatic temperature control with surface mounted thermostat automatically cycles on and off to maintain desired water temperature. Proprietary protective steel formulation with a unique coat of high temperature porcelain enamel. Design maximizes corrosion resistance and life of anode rod. Patented corrosion-resistant elements include double layer of magnesium oxide and copper to resist corrosion. Factory installed brass drain valve allows for faster draining and servicing. These units are suited for a wide variety of applications such as retail stores and small offices. Available in 65 80 and 119.9-gallon models. 6-Year limited tank warranty for commercial applications. Mfg #ELD66-D 277 VOLT 12KW
• Rheem Commercial Light Duty 66 G 277-Volt 12 kW Electric Water Heater
• Simultaneous Wiring, Single Phase
• Energy Efficient Design Reduces Energy Consumption And Standby Heat Loss With 2-1/2 In. Of Rigid Polyurethane Foam Insulation
• Automatic Temperature Control With Surface Mounted Thermostat Automatically Cycles On And Off To Maintain Desired Water Temperature
• Proprietary Protective Steel Formulation With A Unique Coat Of High Temperature Porcelain Enamel
• Design Maximizes Corrosion Resistance And Life Of Anode Rod
• Patented Corrosion-Resistant Elements Include Double Layer Of Magnesium Oxide And Copper To Resist Corrosion
• Factory Installed Brass Drain Valve Allows For Faster Draining And Servicing
• These Units Are Suited For A Wide Variety Of Applications Such As Retail Stores And Small Offices
• Available In 65, 80 And 119.9-Gallon Models
• 6-Year Limited Tank Warranty For Commercial Applications
• MFG# ELD66-D 277 VOLT 12KW

Rheem Commercial Heavy-Duty Electric Water Heaters are suitable for general commercial hot water applications and are also ideal for point-of-use installations. A single unit can be used as a booster heater to satisfy the hot water requirements of commercial dishwashers. A single temperature storage unit, when installed with a mixing valve, will supply two temperatures in food service establishments.

• System sentinel diagnostics identifies a non-operating element
• Long life tank design: proprietary steel formulation with high temperature porcelain enamel to maximize corrosion resistance resulting in a superior tank design
• Minimum distance to combustibles is 0 in. from jacket and 18 in. from access door
• Control box is located at the front of unit for easy wiring during installation with multiple knockout holes to accommodate a variety of conduit sizes
• Factory wired 3-phase, approved for field conversion to single phase
• Screw-in stainless steel elements that resist burn out and corrosion
• Thick foam insulation for minimal standby heat loss
• 2-anode rods are installed to ensure long life and corrosion resistance
• Full port, full flow brass drain valve reduces time to drain and service tank
• Factory installed temperature and pressure relief valve

• Rheem's light-duty commercial electric water heaters with Terminal Block are field convertible to meet any Light-Duty hot water application need. Easily convert standard models from simultaneous to non-simultaneous and single phase to three phase. Models range from 30 Gal. through 50 Gal. They are available in 3kW through 12kW and in 208-Volt, 240-Volt, 277-Volt and 480-Volt. Short models are available. All models shipped in simultaneous configuration.
• 50 Gal. 208V 9kW Multi-Phase Field Convertible Electric Tank Water Heater
• Terminal Block Enables Easy Field Level Conversion For A Variety Of Light-Duty Applications
• Easy To Convert Standard Models From Simultaneous To Non-Simultaneous, Single Phase To 3 Phase
• Factory Shipped In Simultaneous Configuration
• Energy Efficient Design Reduces Energy Consumption And Standby Heat Loss With 2-1/2 In. Of Rigid Polyurethane Foam Insulation
• Automatic Temperature Control With Surface Mounted Thermostat Automatically Cycles On And Off To Maintain Desired Water Temperature
• Proprietary Protective Steel Formulation With A Unique Coat Of High Temperature Porcelain Enamel
• Design Maximizes Corrosion Resistance And Life Of Anode Rod
• Patented Corrosion-Resistant Elements Include Double Layer Of Magnesium Oxide And Copper To Resist Corrosion
• Durable Factory-Installed Full Flow Brass Drain Value
• Low-Lead Compliant
• 3-Year Limited Tank Warranty, Upgradable To 5-Years
• These Products Are Design Certified By Underwriters Laboratories (Ul) To Meet Ul Safety Standards As Electric Storage Tank Water Heaters.
• These Light Duty Models Are Available With Terminal Block In Both Fused And Non-Fused Configurations. All Water Heaters With Power Requirements Over 48 Amps Come Standard In The Fused Configuration.
• MFG# ELD52-TB 208 VOLT 9 KW

• Rheem Commercial point-of-use POU water heaters are well-suited for a wide variety of applications. They are ideally suited for installation in retail stores public restrooms rehab centers office washrooms kitchen and mop or bar sinks. POU water heaters are small enough to fit in limited spaces under counters mop sinks cabinets or any remote area where modest quantities of hot water are required. Since "point-of-use" water heaters are installed very near the location where hot water is used less heat is lost between the tank and the tap. In instances where a centralized water heater is located a long distance from the hot water tap a commercial point-of-use model installed near the tap is often used to boost the water temperature and reduce wait times for hot water. Installation and maintenance are simplified with side water connects and power connections located and accessible from the front.
• Commercial 6 Gal. 277V 3kW 1 Phase Electric Tank Water Heater
• Long Life Heating Elements: Patented Resistor Elements Designed With A Specially Treated Double Layer Of Magnesium Oxide And Copper To Resist Corrosion
• Proprietary Steel Formulation With A Unique Coat Of High Temperature Porcelain Enamel Maximizes Corrosion Resistance
• Rigid Polyurethane Foam Insulation Provides Superior Insulating Qualities Resulting In Reduced Operating Costs
• Premium Grade Anode Rod Provides Advanced Technology And Equalizes Aggressive Water Action
• Surface Mounted Thermostat Automatically Cycles On And Off To Maintain The Water Temperature At A Desired Preset Level
• Temperature Limiting Control Automatically And Safely Cuts Off The Power In The Unlikely Event That The Water Temperature Exceeds 190 Degree F
• Certified For 150 Psi Maximum Working Pressure
• All Models Are Single Phase
• Factory Installed Temperature And Pressure Relief Valve
• 2-1/2 Gal. Model Comes Standard With Wall Mounting Kit
• 3-Year Limited Tank Warranty
• These Units Are Suited For A Wide Variety Of Applications And Small Enough For Installation In Limited Spaces Where Modest Quantities Of Hot Water Are Required
• Proprietary Steel Formulation With A Unique Coat Of High Temperature Porcelain Enamel Maximizes Corrosion Resistance Of The Tank
• MFG# EGSP6 277 VOLT 3KW POU

Well-suited for a wide variety of applications, point-of-use water heaters are small enough for installations in limited spaces including under counters, mop sinks, cabinets or any remote area where modest quantities of hot water are required. They are ideally suited for applications in retail stores, public restrooms, office washrooms, kitchen and mop or bar sinks. Note Product Name for Gal.-Volt-Watt-Phase-Code-Thermostat configuration.

• Long life heating elements: patented resistor elements designed with a specially treated double layer of magnesium oxide and copper to resist corrosion
• Proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion resistance
• Rigid polyurethane foam insulation provides superior insulating qualities resulting in reduced operating costs
• Premium grade anode rod provides advanced technology and equalizes aggressive water action
• Surface mounted thermostat automatically cycles on and off to maintain the water temperature at a desired preset level
• Temperature limiting control automatically and safely cuts off the power in the unlikely event that the water temperature exceeds 190 degree F
• Certified for 150 psi maximum working pressure
• All models are single phase
• Factory installed temperature and pressure relief valve
• 2-1/2 Gal. model comes standard with wall mounting kit

Rheem Commercial Heavy-Duty Electric Water Heaters are suitable for general commercial hot water applications and are also ideal for point-of-use installations. A single unit can be used as a booster heater to satisfy the hot water requirements of commercial dishwashers. A single temperature storage unit, when installed with a mixing valve, will supply two temperatures in food service establishments.

• System sentinel diagnostics identifies a non-operating element
• Long life tank design: proprietary steel formulation with high temperature porcelain enamel to maximize corrosion resistance resulting in a superior tank design
• Minimum distance to combustibles is 0 in. from jacket and 18 in. from access door
• Control box is located at the front of unit for easy wiring during installation with multiple knockout holes to accommodate a variety of conduit sizes
• Factory wired 3-phase, approved for field conversion to single phase
• Screw-in stainless steel elements that resist burn out and corrosion
• Thick foam insulation for minimal standby heat loss
• 2-anode rods are installed to ensure long life and corrosion resistance
• Full port, full flow brass drain valve reduces time to drain and service tank
• Factory installed temperature and pressure relief valve

LavAdvantage is a thermostatic point-of-use Commercial Electric Tankless water heater for handwashing and other low flow applications. With 3/8 in. compression fittings, LavAdvantage is easy to install and use, and has the industry's lowest activation with 0.2 GPM turn on flow. Other features include: silent operation, field adjustable set point, dry-fire protection on initial start-up, and active energy management with power modulating controls. The SPEX65T is 6.5 kW and requires 240-Volt.

• Industry's lowest activation with 0.2 GPM turn on flow
• Active energy management with power modulating controls
• Microprocessor temperature control with digital display for thermostatic accuracy +/- 1 degree F
• Field adjustable set point range between 70 degree -140 degree F, factory set at 120 degree F
• Silent operation
• Mounts in any orientation
• SafeStart technology engages upon installation to help protect against dry-fire occurrence
• Accessible diagnostic feature displays error codes
• Endless hot water
• Installs directly at the point of use

Rheem Commercial point-of-use (POU) water heaters are well-suited for a wide variety of applications. They are ideally suited for installation in retail stores, public restrooms, rehab centers, office washrooms, kitchen and mop or bar sinks. POU water heaters are small enough to fit in limited spaces under counters, mop sinks, cabinets or any remote area where modest quantities of hot water are required. Since "point-of-use" water heaters are installed very near the location where hot water is used, less heat is lost between the tank and the tap. In instances where a centralized water heater is located a long distance from the hot water tap, a commercial point-of-use model installed near the tap is often used to boost the water temperature and reduce wait times for hot water. Installation and maintenance are simplified with side water connects and power connections located and accessible from the front.

• Long life heating elements: patented resistor elements designed with a specially treated double layer of magnesium oxide and copper to resist corrosion
• Proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion resistance
• Rigid polyurethane foam insulation provides superior insulating qualities resulting in reduced operating costs
• Premium grade anode rod provides advanced technology and equalizes aggressive water action
• Surface mounted thermostat automatically cycles on and off to maintain the water temperature at a desired preset level
• Temperature limiting control automatically and safely cuts off the power in the unlikely event that the water temperature exceeds 190 degree F
• Certified for 150 psi maximum working pressure
• All models are single phase
• Factory installed temperature and pressure relief valve
• 2-1/2 gal. model comes standard with wall mounting kit

LavAdvantage is a thermostatic point-of-use Commercial Electric Tankless water heater for handwashing and other low flow applications. With 3/8 in. compression fittings, LavAdvantage is easy to install and use, and has the industrys lowest activation with 0.2 GPM turn on flow. Other features include: silent operation, field adjustable set point, dry-fire protection on initial start-up, and active energy management with power modulating controls. The SPEX100T is 10 kW and requires 277-Volt.

• Industry's lowest activation with 0.2 GPM turn on flow
• Active energy management with power modulating controls
• Microprocessor temperature control with digital display for thermostatic accuracy +/- 1 degree F
• Field adjustable set point range between 70 degree -140 degree F, factory set at 120 degree F
• Silent operation
• Mounts in any orientation
• SafeStart technology engages upon installation to help protect against dry-fire occurrence
• Accessible diagnostic feature displays error codes
• Endless hot water
• Installs directly at the point of use

FlowCo is a reliable non-thermostatic water heater delivering endless hot water on demand. FlowCo is ideal for single, sensor faucets or single, metering faucets for handwashing and other fixed-flow applications. The SPEX1812 has 1.8 kW and 120-Volt requirements.

• SafeStart technology
• Mounts in any orientation
• Integral 3/8 in. compression fittings
• Compact size
• Control system activates heater only on demand
• High temperature limit switch (eco- automatic energy cut-off)
• Self-diagnostics/intelligent controls
• No T&P relief valve needed (check local codes)
• Low activation flow starting at 0.25 GPM turn on (model dependent)
• InfoCue - visible LED indicator

LavAdvantage is a thermostatic point-of-use Commercial Electric Tankless water heater for handwashing and other low flow applications. With 3/8 in. compression fittings, LavAdvantage is easy to install and use, and has the industrys lowest activation with 0.2 GPM turn on flow. Other features include: silent operation, field adjustable set point, dry-fire protection on initial start-up, and active energy management with power modulating controls. The SPEX60T is 6 kW and requires 277-Volt.

• Industry's lowest activation with 0.2 GPM turn on flow
• Active energy management with power modulating controls
• Microprocessor temperature control with digital display for thermostatic accuracy +/- 1 degree F
• Field adjustable set point range between 70 degree -140 degree F, factory set at 120 degree F
• Silent operation
• Mounts in any orientation
• SafeStart technology engages upon installation to help protect against dry-fire occurrence
• Accessible diagnostic feature displays error codes
• Endless hot water
• Installs directly at the point of use

Rheem Commercial point-of-use (POU) water heaters are well-suited for a wide variety of applications. They are ideally suited for installation in retail stores, public restrooms, rehab centers, office washrooms, kitchen and mop or bar sinks. POU water heaters are small enough to fit in limited spaces under counters, mop sinks, cabinets or any remote area where modest quantities of hot water are required. Since "point-of-use" water heaters are installed very near the location where hot water is used, less heat is lost between the tank and the tap. In instances where a centralized water heater is located a long distance from the hot water tap, a commercial point-of-use model installed near the tap is often used to boost the water temperature and reduce wait times for hot water. Installation and maintenance are simplified with side water connects and power connections located and accessible from the front.

• Long life heating elements: patented resistor elements designed with a specially treated double layer of magnesium oxide and copper to resist corrosion
• Proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion resistance
• Rigid polyurethane foam insulation provides superior insulating qualities resulting in reduced operating costs
• Premium grade anode rod provides advanced technology and equalizes aggressive water action
• Surface mounted thermostat automatically cycles on and off to maintain the water temperature at a desired preset level
• Temperature limiting control automatically and safely cuts off the power in the unlikely event that the water temperature exceeds 190 degree F
• Certified for 150 psi maximum working pressure
• All models are single phase
• Factory installed temperature and pressure relief valve
• 2-1/2 gal. model comes standard with wall mounting kit

Rheems light-duty commercial electric water heaters with Terminal Block able to meet any light duty hot water application need. Easily convert from single phase to 3 phase. Models range from 65 through 120 Gal. They are available in 12.1kW in 208, 240, 277 and 480 Voltages. All models shipped in simultaneous configuration.

• Terminal block enables easy field level conversion for a variety of light duty applications
• Easy to convert standard models from single phase to 3-phase
• Factory shipped in simultaneous configuration
• Energy efficient design reduces energy consumption and standby heat loss with 2-1/2 in. of rigid polyurethane foam insulation
• Automatic temperature control with surface mounted thermostat automatically cycles on and off to maintain desired water temperature
• Proprietary protective steel formulation with a unique coat of high temperature porcelain enamel
• Design maximizes corrosion resistance and life of anode rod
• Patented corrosion-resistant elements include double layer of magnesium oxide and copper to resist corrosion
• Durable factory-installed full flow brass drain value
• Low lead compliant
• Ensures compliance with energy conservation standards per Title 10 to the code of federal regulations part 431

FlowCo is a reliable non-thermostatic water heater delivering endless hot water on demand. FlowCo is ideal for single, sensor faucets or single, metering faucets for handwashing and other fixed-flow applications. The SPEX80 has 8 kW and 277-Volt requirements.

• SafeStart technology
• Mounts in any orientation
• Integral 3/8 in. compression fittings
• Compact size
• Control system activates heater only on demand
• High temperature limit switch (eco- automatic energy cut-off)
• Self-diagnostics/intelligent controls
• No T&P relief valve needed (check local codes)
• Low activation flow starting at 0.25 GPM turn on (model dependent)
• InfoCue - visible LED indicator

• Rheem Commercial point-of-use POU water heaters are well-suited for a wide variety of applications. They are ideally suited for installation in retail stores public restrooms rehab centers office washrooms kitchen and mop or bar sinks. POU water heaters are small enough to fit in limited spaces under counters mop sinks cabinets or any remote area where modest quantities of hot water are required. Since "point-of-use" water heaters are installed very near the location where hot water is used less heat is lost between the tank and the tap. In instances where a centralized water heater is located a long distance from the hot water tap a commercial point-of-use model installed near the tap is often used to boost the water temperature and reduce wait times for hot water. Installation and maintenance are simplified with side water connects and power connections located and accessible from the front.
• Commercial 10 Gal. 120V 3kW 1 Phase Electric Tank Water Heater
• Factory Installed Temperature And Pressure Relief Valve
• All Models Are Single Phase
• Certified For 150 Psi Maximum Working Pressure
• Temperature Limiting Control Automatically And Safely Cuts Off The Power In The Unlikely Event That The Water Temperature Exceeds 190 Degree F
• Surface Mounted Thermostat Automatically Cycles On And Off To Maintain The Water Temperature At A Desired Preset Level
• Premium Grade Anode Rod Provides Advanced Technology And Equalizes Aggressive Water Action
• Rigid Polyurethane Foam Insulation Provides Superior Insulating Qualities Resulting In Reduced Operating Costs
• Proprietary Steel Formulation With A Unique Coat Of High Temperature Porcelain Enamel Maximizes Corrosion Resistance
• Long Life Heating Elements: Patented Resistor Elements Designed With A Specially Treated Double Layer Of Magnesium Oxide And Copper To Resist Corrosion
• 2-1/2 Gal. Model Comes Standard With Wall Mounting Kit
• 3-Year Limited Tank Warranty
• These Units Are Suited For A Wide Variety Of Applications And Small Enough For Installation In Limited Spaces Where Modest Quantities Of Hot Water Are Required
• Proprietary Steel Formulation With A Unique Coat Of High Temperature Porcelain Enamel Maximizes Corrosion Resistance Of The Tank
• MFG# EGSP10 120 VOLT 3KW POU

• Rheem Commercial point-of-use POU water heaters are well-suited for a wide variety of applications. They are ideally suited for installation in retail stores public restrooms rehab centers office washrooms kitchen and mop or bar sinks. POU water heaters are small enough to fit in limited spaces under counters mop sinks cabinets or any remote area where modest quantities of hot water are required. Since "point-of-use" water heaters are installed very near the location where hot water is used less heat is lost between the tank and the tap. In instances where a centralized water heater is located a long distance from the hot water tap a commercial point-of-use model installed near the tap is often used to boost the water temperature and reduce wait times for hot water. Installation and maintenance are simplified with side water connects and power connections located and accessible from the front.
• Rheem Point Of Use 20 Gallon 277V 3Kw 1 Phase Electric Tank Water Heater
• Factory Installed Temperature And Pressure Relief Valve
• All Models Are Single Phase
• Certified For 150 Psi Maximum Working Pressure
• Temperature Limiting Control Automatically And Safely Cuts Off The Power In The Unlikely Event That The Water Temperature Exceeds 190 Degree F
• Surface Mounted Thermostat Automatically Cycles On And Off To Maintain The Water Temperature At A Desired Preset Level
• Premium Grade Anode Rod Provides Advanced Technology And Equalizes Aggressive Water Action
• Rigid Polyurethane Foam Insulation Provides Superior Insulating Qualities Resulting In Reduced Operating Costs
• Proprietary Steel Formulation With A Unique Coat Of High Temperature Porcelain Enamel Maximizes Corrosion Resistance
• Long Life Heating Elements: Patented Resistor Elements Designed With A Specially Treated Double Layer Of Magnesium Oxide And Copper To Resist Corrosion
• 2-1/2 Gallon Model Comes Standard With Wall Mounting Kit
• 3-Year Limited Tank Warranty
• These Units Are Suited For A Wide Variety Of Applications And Small Enough For Installation In Limited Spaces Where Modest Quantities Of Hot Water Are Required
• Proprietary Steel Formulation With A Unique Coat Of High Temperature Porcelain Enamel Maximizes Corrosion Resistance Of The Tank
• MFG# EGSP20 277 VOLT 3KW POU

LavAdvantage is a thermostatic point-of-use Commercial Electric Tankless water heater for handwashing and other low flow applications. With 3/8 in. compression fittings, LavAdvantage is easy to install and use, and has the industrys lowest activation with 0.2 GPM turn on flow. Other features include: silent operation, field adjustable set point, dry-fire protection on initial start-up, and active energy management with power modulating controls. The SPEX35T is 3.5 kW and requires 240-Volt.

• Industry's lowest activation with 0.2 GPM turn on flow
• Active energy management with power modulating controls
• Microprocessor temperature control with digital display for thermostatic accuracy +/- 1 degree F
• Field adjustable set point range between 70 degree -140 degree F, factory set at 120 degree F
• Silent operation
• Mounts in any orientation
• SafeStart technology engages upon installation to help protect against dry-fire occurrence
• Accessible diagnostic feature displays error codes
• Endless hot water
• Installs directly at the point of use

Rheem Commercial point-of-use (POU) water heaters are well-suited for a wide variety of applications. They are ideally suited for installation in retail stores, public restrooms, rehab centers, office washrooms, kitchen and mop or bar sinks. POU water heaters are small enough to fit in limited spaces under counters, mop sinks, cabinets or any remote area where modest quantities of hot water are required. Since "point-of-use" water heaters are installed very near the location where hot water is used, less heat is lost between the tank and the tap. In instances where a centralized water heater is located a long distance from the hot water tap, a commercial point-of-use model installed near the tap is often used to boost the water temperature and reduce wait times for hot water. Installation and maintenance are simplified with side water connects and power connections located and accessible from the front.

• Long life heating elements: patented resistor elements designed with a specially treated double layer of magnesium oxide and copper to resist corrosion
• Proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion resistance
• Rigid polyurethane foam insulation provides superior insulating qualities resulting in reduced operating costs
• Premium grade anode rod provides advanced technology and equalizes aggressive water action
• Surface mounted thermostat automatically cycles on and off to maintain the water temperature at a desired preset level
• Temperature limiting control automatically and safely cuts off the power in the unlikely event that the water temperature exceeds 190 degree F
• Certified for 150 psi maximum working pressure
• All models are single phase
• Factory installed temperature and pressure relief valve
• 2-1/2 gal. model comes standard with wall mounting kit

LavAdvantage is a thermostatic point-of-use Commercial Electric Tankless water heater for handwashing and other low flow applications. With 3/8 in. compression fittings, LavAdvantage is easy to install and use, and has the industry's lowest activation with 0.2 GPM turn on flow. Other features include: silent operation, field adjustable set point, dry-fire protection on initial start-up, and active energy management with power modulating controls. The SPEX3512T is 3.5 kW and requires 120-Volt.

• Industry's lowest activation with 0.2 GPM turn on flow
• Active energy management with power modulating controls
• Microprocessor temperature control with digital display for thermostatic accuracy +/- 1 degree F
• Field adjustable set point range between 70 degree -140 degree F, factory set at 120 degree F
• Silent operation
• Mounts in any orientation
• SafeStart technology engages upon installation to help protect against dry-fire occurrence
• Accessible diagnostic feature displays error codes
• Endless hot water
• Installs directly at the point of use

• Rheem Commercial point-of-use POU water heaters are well-suited for a wide variety of applications. They are ideally suited for installation in retail stores public restrooms rehab centers office washrooms kitchen and mop or bar sinks. POU water heaters are small enough to fit in limited spaces under counters mop sinks cabinets or any remote area where modest quantities of hot water are required. Since "point-of-use" water heaters are installed very near the location where hot water is used less heat is lost between the tank and the tap. In instances where a centralized water heater is located a long distance from the hot water tap a commercial point-of-use model installed near the tap is often used to boost the water temperature and reduce wait times for hot water. Installation and maintenance are simplified with side water connects and power connections located and accessible from the front.
• Commercial 20 Gal. 480V 6kW 1 Phase Electric Tank Water Heater
• Factory Installed Temperature And Pressure Relief Valve
• All Models Are Single Phase
• Certified For 150 Psi Maximum Working Pressure
• Temperature Limiting Control Automatically And Safely Cuts Off The Power In The Unlikely Event That The Water Temperature Exceeds 190 Degree F
• Surface Mounted Thermostat Automatically Cycles On And Off To Maintain The Water Temperature At A Desired Preset Level
• Premium Grade Anode Rod Provides Advanced Technology And Equalizes Aggressive Water Action
• Rigid Polyurethane Foam Insulation Provides Superior Insulating Qualities Resulting In Reduced Operating Costs
• Proprietary Steel Formulation With A Unique Coat Of High Temperature Porcelain Enamel Maximizes Corrosion Resistance
• Long Life Heating Elements: Patented Resistor Elements Designed With A Specially Treated Double Layer Of Magnesium Oxide And Copper To Resist Corrosion
• 2-1/2 Gal. Model Comes Standard With Wall Mounting Kit
• 3-Year Limited Tank Warranty
• These Units Are Suited For A Wide Variety Of Applications And Small Enough For Installation In Limited Spaces Where Modest Quantities Of Hot Water Are Required
• Proprietary Steel Formulation With A Unique Coat Of High Temperature Porcelain Enamel Maximizes Corrosion Resistance Of The Tank
• MFG# EGSP20 480 VOLT 6KW POU

• Rheem's light-duty commercial electric water heaters with Terminal Block are field convertible to meet any Light-Duty hot water application need. Easily convert standard models from simultaneous to non-simultaneous and single phase to three phase. Models range from 30 Gal. through 50 Gal. They are available in 3kW through 12kW and in 208-Volt, 240-Volt, 277-Volt and 480-Volt. Short models are available. All models shipped in simultaneous configuration.
• Electric Tank Water Heater 50 Gal. 208V 12kW Multi Phase Field Convertible
• Terminal Block Enables Easy Field Level Conversion For A Variety Of Light-Duty Applications
• Easy To Convert Standard Models From Simultaneous To Non-Simultaneous, Single Phase To 3 Phase
• Factory Shipped In Simultaneous Configuration
• Energy Efficient Design Reduces Energy Consumption And Standby Heat Loss With 2-1/2 In. Of Rigid Polyurethane Foam Insulation
• Automatic Temperature Control With Surface Mounted Thermostat Automatically Cycles On And Off To Maintain Desired Water Temperature
• Proprietary Protective Steel Formulation With A Unique Coat Of High Temperature Porcelain Enamel
• Design Maximizes Corrosion Resistance And Life Of Anode Rod
• Patented Corrosion-Resistant Elements Include Double Layer Of Magnesium Oxide And Copper To Resist Corrosion
• Durable Factory-Installed Full Flow Brass Drain Value
• Low-Lead Compliant
• 3-Year Limited Tank Warranty, Upgradable To 5-Years
• These Products Are Design Certified By Underwriters Laboratories (Ul) To Meet Ul Safety Standards As Electric Storage Tank Water Heaters.
• These Light Duty Models Are Available With Terminal Block In Both Fused And Non-Fused Configurations. All Water Heaters With Power Requirements Over 48 Amps Come Standard In The Fused Configuration.
• MFG# ELDS52-FTB 208 VOLT 12 KW

Rheem Commercial point-of-use (POU) water heaters are well-suited for a wide variety of applications. They are ideally suited for installation in retail stores, public restrooms, rehab centers, office washrooms, kitchen and mop or bar sinks. POU water heaters are small enough to fit in limited spaces under counters, mop sinks, cabinets or any remote area where modest quantities of hot water are required. Since "point-of-use" water heaters are installed very near the location where hot water is used, less heat is lost between the tank and the tap. In instances where a centralized water heater is located a long distance from the hot water tap, a commercial point-of-use model installed near the tap is often used to boost the water temperature and reduce wait times for hot water. Installation and maintenance are simplified with side water connects and power connections located and accessible from the front.

• Long life heating elements: patented resistor elements designed with a specially treated double layer of magnesium oxide and copper to resist corrosion
• Proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion resistance
• Rigid polyurethane foam insulation provides superior insulating qualities resulting in reduced operating costs
• Premium grade anode rod provides advanced technology and equalizes aggressive water action
• Surface mounted thermostat automatically cycles on and off to maintain the water temperature at a desired preset level
• Temperature limiting control automatically and safely cuts off the power in the unlikely event that the water temperature exceeds 190 degree F
• Certified for 150 psi maximum working pressure
• All models are single phase
• Factory installed temperature and pressure relief valve
• 2-1/2 gal. model comes standard with wall mounting kit

FlowCo is a reliable non-thermostatic water heater delivering endless hot water on demand. FlowCo is ideal for single, sensor faucets or single, metering faucets for handwashing and other fixed-flow applications. The SPEX3277 has 3 kW and 277-Volt requirements.

• SafeStart technology
• Mounts in any orientation
• Integral 3/8 in. compression fittings
• Compact size
• Control system activates heater only on demand
• High temperature limit switch (eco- automatic energy cut-off)
• Self-diagnostics/intelligent controls
• No T&P relief valve needed (check local codes)
• Low activation flow starting at 0.25 GPM turn on (model dependent)
• InfoCue - visible LED indicator

FlowCo is a reliable non-thermostatic water heater delivering endless hot water on demand. FlowCo is ideal for single, sensor faucets or single, metering faucets for handwashing and other fixed-flow applications. The SPEX75 has 7.5 kW and 240-Volt requirements.

• SafeStart technology
• Mounts in any orientation
• Integral 3/8 in. compression fittings
• Compact size
• Control system activates heater only on demand
• High temperature limit switch (eco- automatic energy cut-off)
• Self-diagnostics/intelligent controls
• No T&P relief valve needed (check local codes)
• Low activation flow starting at 0.25 GPM turn on (model dependent)
• InfoCue - visible LED indicator

LavAdvantage is a thermostatic point-of-use Commercial Electric Tankless water heater for handwashing and other low flow applications. With 3/8 in. compression fittings, LavAdvantage is easy to install and use, and has the industrys lowest activation with 0.2 GPM turn on flow. Other features include: silent operation, field adjustable set point, dry-fire protection on initial start-up, and active energy management with power modulating controls. The SPEX55T is 5.5 kW and requires 240-Volt.

• Industry's lowest activation with 0.2 GPM turn on flow
• Active energy management with power modulating controls
• Microprocessor temperature control with digital display for thermostatic accuracy +/- 1 degree F
• Field adjustable set point range between 70 degree -140 degree F, factory set at 120 degree F
• Silent operation
• Mounts in any orientation
• SafeStart technology engages upon installation to help protect against dry-fire occurrence
• Accessible diagnostic feature displays error codes
• Endless hot water
• Installs directly at the point of use

• Rheem's light-duty commercial electric water heaters with Terminal Block are field convertible to meet any Light-Duty hot water application need. Easily convert standard models from simultaneous to non-simultaneous and single phase to three phase. Models range from 30 Gal. through 50 Gal. They are available in 3kW through 12kW and in 208-Volt, 240-Volt, 277-Volt and 480-Volt. Short models are available. All models shipped in simultaneous configuration.
• Rheem Lt Duty 30G Short 208V Multi Phase Convertible Electric Tank Water Heater
• Terminal Block Enables Easy Field Level Conversion For A Variety Of Light-Duty Applications
• Easy To Convert Standard Models From Simultaneous To Non-Simultaneous, Single Phase To 3 Phase
• Factory Shipped In Simultaneous Configuration
• Energy Efficient Design Reduces Energy Consumption And Standby Heat Loss With 2-1/2 In. Of Rigid Polyurethane Foam Insulation
• Automatic Temperature Control With Surface Mounted Thermostat Automatically Cycles On And Off To Maintain Desired Water Temperature
• Proprietary Protective Steel Formulation With A Unique Coat Of High Temperature Porcelain Enamel
• Design Maximizes Corrosion Resistance And Life Of Anode Rod
• Patented Corrosion-Resistant Elements Include Double Layer Of Magnesium Oxide And Copper To Resist Corrosion
• Durable Factory-Installed Full Flow Brass Drain Value
• Low Lead Compliant
• Field Convertible Simultaneous To Non-Simultaneous, Single Phase To Three Phase
• Backed By Rheem'S 3 Year Limited Warranty
• MFG# ELDS30-TB 208 VOLT 9 KW

• Rheem's light-duty commercial electric water heaters with Terminal Block are field convertible to meet any Light-Duty hot water application need. Easily convert standard models from simultaneous to non-simultaneous and single phase to three phase. Models range from 30 Gal. through 50 Gal. They are available in 3kW through 12kW and in 208-Volt, 240-Volt, 277-Volt and 480-Volt. Short models are available. All models shipped in simultaneous configuration.
• 50 Gal. 208V 9kW Short Multi-Phase Field Convertible Electric Tank Water Heater Short
• Terminal Block Enables Easy Field Level Conversion For A Variety Of Light-Duty Applications
• Easy To Convert Standard Models From Simultaneous To Non-Simultaneous, Single Phase To 3 Phase
• Factory Shipped In Simultaneous Configuration
• Energy Efficient Design Reduces Energy Consumption And Standby Heat Loss With 2-1/2 In. Of Rigid Polyurethane Foam Insulation
• Automatic Temperature Control With Surface Mounted Thermostat Automatically Cycles On And Off To Maintain Desired Water Temperature
• Proprietary Protective Steel Formulation With A Unique Coat Of High Temperature Porcelain Enamel
• Design Maximizes Corrosion Resistance And Life Of Anode Rod
• Patented Corrosion-Resistant Elements Include Double Layer Of Magnesium Oxide And Copper To Resist Corrosion
• Durable Factory-Installed Full Flow Brass Drain Value
• Low-Lead Compliant
• 3-Year Limited Tank Warranty, Upgradable To 5-Years
• These Products Are Design Certified By Underwriters Laboratories (Ul) To Meet Ul Safety Standards As Electric Storage Tank Water Heaters.
• These Light Duty Models Are Available With Terminal Block In Both Fused And Non-Fused Configurations. All Water Heaters With Power Requirements Over 48 Amps Come Standard In The Fused Configuration.
• MFG# ELDS52-TB 208 VOLT 9 KW

• Rheem Commercial point-of-use POU water heaters are well-suited for a wide variety of applications. They are ideally suited for installation in retail stores public restrooms rehab centers office washrooms kitchen and mop or bar sinks. POU water heaters are small enough to fit in limited spaces under counters mop sinks cabinets or any remote area where modest quantities of hot water are required. Since "point-of-use" water heaters are installed very near the location where hot water is used less heat is lost between the tank and the tap. In instances where a centralized water heater is located a long distance from the hot water tap a commercial point-of-use model installed near the tap is often used to boost the water temperature and reduce wait times for hot water. Installation and maintenance are simplified with side water connects and power connections located and accessible from the front.
• Commercial 6 Gal. 120V 2kW 1 Phase Electric Tank Water Heater
• Factory Installed Temperature And Pressure Relief Valve
• All Models Are Single Phase
• Certified For 150 Psi Maximum Working Pressure
• Temperature Limiting Control Automatically And Safely Cuts Off The Power In The Unlikely Event That The Water Temperature Exceeds 190 Degree F
• Surface Mounted Thermostat Automatically Cycles On And Off To Maintain The Water Temperature At A Desired Preset Level
• Premium Grade Anode Rod Provides Advanced Technology And Equalizes Aggressive Water Action
• Rigid Polyurethane Foam Insulation Provides Superior Insulating Qualities Resulting In Reduced Operating Costs
• Proprietary Steel Formulation With A Unique Coat Of High Temperature Porcelain Enamel Maximizes Corrosion Resistance
• Long Life Heating Elements: Patented Resistor Elements Designed With A Specially Treated Double Layer Of Magnesium Oxide And Copper To Resist Corrosion
• 2-1/2 Gal. Model Comes Standard With Wall Mounting Kit
• 3-Year Limited Tank Warranty
• Designed To Provide Hot Water At The Consumption Point, Eliminating Costly Temperature Loss In Long Piping Runs
• Low Lead Compliant
• Premium Grade Anode Rod Provides Long-Lasting Tank Protection
• MFG# EGSP6 120 VOLT 2KW POU

LavAdvantage is a thermostatic point-of-use Commercial Electric Tankless water heater for handwashing and other low flow applications. With 3/8 in. compression fittings, LavAdvantage is easy to install and use, and has the industrys lowest activation with 0.2 GPM turn on flow. Other features include: silent operation, field adjustable set point, dry-fire protection on initial start-up, and active energy management with power modulating controls. The SPEX80T is 8 kW and requires 277-Volt.

• Industry's lowest activation with 0.2 GPM turn on flow
• Active energy management with power modulating controls
• Microprocessor temperature control with digital display for thermostatic accuracy +/- 1 degree F
• Field adjustable set point range between 70 degree -140 degree F, factory set at 120 degree F
• Silent operation
• Mounts in any orientation
• SafeStart technology engages upon installation to help protect against dry-fire occurrence
• Accessible diagnostic feature displays error codes
• Endless hot water
• Installs directly at the point of use

• Rheem Commercial point-of-use POU water heaters are well-suited for a wide variety of applications. They are ideally suited for installation in retail stores public restrooms rehab centers office washrooms kitchen and mop or bar sinks. POU water heaters are small enough to fit in limited spaces under counters mop sinks cabinets or any remote area where modest quantities of hot water are required. Since "point-of-use" water heaters are installed very near the location where hot water is used less heat is lost between the tank and the tap. In instances where a centralized water heater is located a long distance from the hot water tap a commercial point-of-use model installed near the tap is often used to boost the water temperature and reduce wait times for hot water. Installation and maintenance are simplified with side water connects and power connections located and accessible from the front.
• Rheem Comm 15 Gal 120-Volt 2Kw 1 Phase Electric Tank Wtr Htr
• Long Life Heating Elements: Patented Resistor Elements Designed With A Specially Treated Double Layer Of Magnesium Oxide And Copper To Resist Corrosion
• Proprietary Steel Formulation With A Unique Coat Of High Temperature Porcelain Enamel Maximizes Corrosion Resistance
• Rigid Polyurethane Foam Insulation Provides Superior Insulating Qualities Resulting In Reduced Operating Costs
• Premium Grade Anode Rod Provides Advanced Technology And Equalizes Aggressive Water Action
• Surface Mounted Thermostat Automatically Cycles On And Off To Maintain The Water Temperature At A Desired Preset Level
• Temperature Limiting Control Automatically And Safely Cuts Off The Power In The Unlikely Event That The Water Temperature Exceeds 190 Degree F
• Certified For 150 Psi Maximum Working Pressure
• All Models Are Single Phase
• Factory Installed Temperature And Pressure Relief Valve
• 2-1/2 Gal. Model Comes Standard With Wall Mounting Kit
• MFG# 242842

Rheem Commercial point-of-use (POU) water heaters are well-suited for a wide variety of applications. They are ideally suited for installation in retail stores, public restrooms, rehab centers, office washrooms, kitchen and mop or bar sinks. POU water heaters are small enough to fit in limited spaces under counters, mop sinks, cabinets or any remote area where modest quantities of hot water are required. Since "point-of-use" water heaters are installed very near the location where hot water is used, less heat is lost between the tank and the tap. In instances where a centralized water heater is located a long distance from the hot water tap, a commercial point-of-use model installed near the tap is often used to boost the water temperature and reduce wait times for hot water. Installation and maintenance are simplified with side water connects and power connections located and accessible from the front.

• Long life heating elements: patented resistor elements designed with a specially treated double layer of magnesium oxide and copper to resist corrosion
• Proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion resistance
• Rigid polyurethane foam insulation provides superior insulating qualities resulting in reduced operating costs
• Premium grade anode rod provides advanced technology and equalizes aggressive water action
• Surface mounted thermostat automatically cycles on and off to maintain the water temperature at a desired preset level
• Temperature limiting control automatically and safely cuts off the power in the unlikely event that the water temperature exceeds 190 degree F
• Certified for 150 psi maximum working pressure
• All models are single phase
• Factory installed temperature and pressure relief valve
• 2-1/2 Gal. model comes standard with wall mounting kit

Rheem Commercial point-of-use (POU) water heaters are well-suited for a wide variety of applications. They are ideally suited for installation in retail stores, public restrooms, rehab centers, office washrooms, kitchen and mop or bar sinks. POU water heaters are small enough to fit in limited spaces under counters, mop sinks, cabinets or any remote area where modest quantities of hot water are required. Since "point-of-use" water heaters are installed very near the location where hot water is used, less heat is lost between the tank and the tap. In instances where a centralized water heater is located a long distance from the hot water tap, a commercial point-of-use model installed near the tap is often used to boost the water temperature and reduce wait times for hot water. Installation and maintenance are simplified with side water connects and power connections located and accessible from the front.

• Long life heating elements: patented resistor elements designed with a specially treated double layer of magnesium oxide and copper to resist corrosion
• Proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion resistance
• Rigid polyurethane foam insulation provides superior insulating qualities resulting in reduced operating costs
• Premium grade anode rod provides advanced technology and equalizes aggressive water action
• Surface mounted thermostat automatically cycles on and off to maintain the water temperature at a desired preset level
• Temperature limiting control automatically and safely cuts off the power in the unlikely event that the water temperature exceeds 190 degree F
• Certified for 150 psi maximum working pressure
• All models are single phase
• Factory installed temperature and pressure relief valve
• 2-1/2 gal. model comes standard with wall mounting kit

• Rheem Lt Duty 80G 208V Multi Phase Field Convertible Electric Tank Water Heater. Terminal Block Enables Easy Field Level Conversion For A Variety Of Light-Duty Applications. Easy To Convert Standard Models From Simultaneous To Non-Simultaneous Single Phase To 3 Phase. Factory Shipped In Simultaneous Configuration. Energy Efficient Design Reduces Energy Consumption And Standby Heat Loss With 2-1/2 In. Of Rigid Polyurethane Foam Insulation. Automatic Temperature Control With Surface Mounted Thermostat Automatically Cycles On And Off To Maintain Desired Water Temperature. Proprietary Protective Steel Formulation With A Unique Coat Of High Temperature Porcelain Enamel. Design Maximizes Corrosion Resistance And Life Of Anode Rod. Patented Corrosion-Resistant Elements Include Double Layer Of Magnesium Oxide And Copper To Resist Corrosion. Durable Factory-Installed Full Flow Brass Drain Value. Low Lead Compliant. Field Convertible simultaneous to non-simultaneous single phase to three phase. Backed by Rheem's 3 year limited warranty. Mfg #ELD80-FTB 208 VOLT 12 KW
• Rheem Lt Duty 80G 208V Multi Phase Field Convertible Electric Tank Water Heater
• Terminal Block Enables Easy Field Level Conversion For A Variety Of Light-Duty Applications
• Easy To Convert Standard Models From Simultaneous To Non-Simultaneous, Single Phase To 3 Phase
• Factory Shipped In Simultaneous Configuration
• Energy Efficient Design Reduces Energy Consumption And Standby Heat Loss With 2-1/2 In. Of Rigid Polyurethane Foam Insulation
• Automatic Temperature Control With Surface Mounted Thermostat Automatically Cycles On And Off To Maintain Desired Water Temperature
• Proprietary Protective Steel Formulation With A Unique Coat Of High Temperature Porcelain Enamel
• Design Maximizes Corrosion Resistance And Life Of Anode Rod
• Patented Corrosion-Resistant Elements Include Double Layer Of Magnesium Oxide And Copper To Resist Corrosion
• Durable Factory-Installed Full Flow Brass Drain Value
• Low Lead Compliant
• Field Convertible Simultaneous To Non-Simultaneous, Single Phase To Three Phase
• Backed By Rheem'S 3 Year Limited Warranty
• MFG# ELD80-FTB 208 VOLT 12 KW

Rheem Commercial point-of-use (POU) water heaters are well-suited for a wide variety of applications. They are ideally suited for installation in retail stores, public restrooms, rehab centers, office washrooms, kitchen and mop or bar sinks. POU water heaters are small enough to fit in limited spaces under counters, mop sinks, cabinets or any remote area where modest quantities of hot water are required. Since "point-of-use" water heaters are installed very near the location where hot water is used, less heat is lost between the tank and the tap. In instances where a centralized water heater is located a long distance from the hot water tap, a commercial point-of-use model installed near the tap is often used to boost the water temperature and reduce wait times for hot water. Installation and maintenance are simplified with side water connects and power connections located and accessible from the front.

• Long life heating elements: patented resistor elements designed with a specially treated double layer of magnesium oxide and copper to resist corrosion
• Proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion resistance
• Rigid polyurethane foam insulation provides superior insulating qualities resulting in reduced operating costs
• Premium grade anode rod provides advanced technology and equalizes aggressive water action
• Surface mounted thermostat automatically cycles on and off to maintain the water temperature at a desired preset level
• Temperature limiting control automatically and safely cuts off the power in the unlikely event that the water temperature exceeds 190 degree F
• Certified for 150 psi maximum working pressure
• All models are single phase
• Factory installed temperature and pressure relief valve
• 2-1/2 gal. model comes standard with wall mounting kit

LavAdvantage is a thermostatic point-of-use Commercial Electric Tankless water heater for handwashing and other low flow applications. With 3/8 in. compression fittings, LavAdvantage is easy to install and use, and has the industrys lowest activation with 0.2 GPM turn on flow. Other features include: silent operation, field adjustable set point, dry-fire protection on initial start-up, and active energy management with power modulating controls. The SPEX3277T is 3 kW and requires 208-Volt.

• Industry's lowest activation with 0.2 GPM turn on flow
• Active energy management with power modulating controls
• Microprocessor temperature control with digital display for thermostatic accuracy +/- 1 degree F
• Field adjustable set point range between 70 degree -140 degree F, factory set at 120 degree F
• Silent operation
• Mounts in any orientation
• SafeStart technology engages upon installation to help protect against dry-fire occurrence
• Accessible diagnostic feature displays error codes
• Endless hot water
• Installs directly at the point of use

• Rheem Commercial Light Duty 120 G 277-Volt 12 kW Electric Water Heater. Simultaneous Wiring Single Phase. Energy efficient design reduces energy consumption and standby heat loss with 2-1/2 in. of rigid polyurethane foam insulation. Automatic temperature control with surface mounted thermostat automatically cycles on and off to maintain desired water temperature. Proprietary protective steel formulation with a unique coat of high temperature porcelain enamel. Design maximizes corrosion resistance and life of anode rod. Patented corrosion-resistant elements include double layer of magnesium oxide and copper to resist corrosion. Factory installed brass drain valve allows for faster draining and servicing. These units are suited for a wide variety of applications such as retail stores and small offices. Available in 65 80 and 119.9-gallon models. 6-Year limited tank warranty for commercial applications. Mfg #ELD120-D 277 VOLT 12KW
• Rheem Commercial Light Duty 120 G 277-Volt 12 kW Electric Water Heater
• Simultaneous Wiring, Single Phase
• Energy Efficient Design Reduces Energy Consumption And Standby Heat Loss With 2-1/2 In. Of Rigid Polyurethane Foam Insulation
• Automatic Temperature Control With Surface Mounted Thermostat Automatically Cycles On And Off To Maintain Desired Water Temperature
• Proprietary Protective Steel Formulation With A Unique Coat Of High Temperature Porcelain Enamel
• Design Maximizes Corrosion Resistance And Life Of Anode Rod
• Patented Corrosion-Resistant Elements Include Double Layer Of Magnesium Oxide And Copper To Resist Corrosion
• Factory Installed Brass Drain Valve Allows For Faster Draining And Servicing
• These Units Are Suited For A Wide Variety Of Applications Such As Retail Stores And Small Offices
• Available In 65, 80 And 119.9-Gallon Models
• 6-Year Limited Tank Warranty For Commercial Applications
• MFG# ELD120-D 277 VOLT 12KW

• Rheem Commercial point-of-use POU water heaters are well-suited for a wide variety of applications. They are ideally suited for installation in retail stores public restrooms rehab centers office washrooms kitchen and mop or bar sinks. POU water heaters are small enough to fit in limited spaces under counters mop sinks cabinets or any remote area where modest quantities of hot water are required. Since "point-of-use" water heaters are installed very near the location where hot water is used less heat is lost between the tank and the tap. In instances where a centralized water heater is located a long distance from the hot water tap a commercial point-of-use model installed near the tap is often used to boost the water temperature and reduce wait times for hot water. Installation and maintenance are simplified with side water connects and power connections located and accessible from the front.
• Commercial 20 Gal. 208V 4.5kW 1-Phase Electric Tank Water Heater
• Long Life Heating Elements: Patented Resistor Elements Designed With A Specially Treated Double Layer Of Magnesium Oxide And Copper To Resist Corrosion
• Proprietary Steel Formulation With A Unique Coat Of High Temperature Porcelain Enamel Maximizes Corrosion Resistance
• Rigid Polyurethane Foam Insulation Provides Superior Insulating Qualities Resulting In Reduced Operating Costs
• Premium Grade Anode Rod Provides Advanced Technology And Equalizes Aggressive Water Action
• Surface Mounted Thermostat Automatically Cycles On And Off To Maintain The Water Temperature At A Desired Preset Level
• Temperature Limiting Control Automatically And Safely Cuts Off The Power In The Unlikely Event That The Water Temperature Exceeds 190 Degree F
• Certified For 150 Psi Maximum Working Pressure
• All Models Are Single Phase
• Factory Installed Temperature And Pressure Relief Valve
• Etl Listed To Ul174 And Nsf 373
• Ideally Suited For Installation In Retail Stores, Public Restrooms, Rehab Centers, Office Washrooms, Kitchen And Mop Or Bar Sinks
• Installation And Maintenance Are Simplified With Side Water Connects And Power Connections Located And Accessible From The Front
• 3-Year Limited Tank Warranty, Upgradable To 5-Years
• MFG# EGSP20 208 VOLT 4.5KW POU

Rheem Commercial point-of-use (POU) water heaters are well-suited for a wide variety of applications. They are ideally suited for installation in retail stores, public restrooms, rehab centers, office washrooms, kitchen and mop or bar sinks. POU water heaters are small enough to fit in limited spaces under counters, mop sinks, cabinets or any remote area where modest quantities of hot water are required. Since "point-of-use" water heaters are installed very near the location where hot water is used, less heat is lost between the tank and the tap. In instances where a centralized water heater is located a long distance from the hot water tap, a commercial point-of-use model installed near the tap is often used to boost the water temperature and reduce wait times for hot water. Installation and maintenance are simplified with side water connects and power connections located and accessible from the front.

• Long life heating elements: patented resistor elements designed with a specially treated double layer of magnesium oxide and copper to resist corrosion
• Proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion resistance
• Rigid polyurethane foam insulation provides superior insulating qualities resulting in reduced operating costs
• Premium grade anode rod provides advanced technology and equalizes aggressive water action
• Surface mounted thermostat automatically cycles on and off to maintain the water temperature at a desired preset level
• Temperature limiting control automatically and safely cuts off the power in the unlikely event that the water temperature exceeds 190 degree F
• Certified for 150 psi maximum working pressure
• All models are single phase
• Factory installed temperature and pressure relief valve
• 2-1/2 Gal. model comes standard with wall mounting kit

FlowCo is a reliable non-thermostatic water heater delivering endless hot water on demand. FlowCo is ideal for single, sensor faucets or single, metering faucets for handwashing and other fixed-flow applications. The SPEX90 has 9 kW and 277-Volt requirements.

• SafeStart technology
• Mounts in any orientation
• Integral 3/8 in. compression fittings
• Compact size
• Control system activates heater only on demand
• High temperature limit switch (eco- automatic energy cut-off)
• Self-diagnostics/intelligent controls
• No T&P relief valve needed (check local codes)
• Low activation flow starting at 0.25 GPM turn on (model dependent)
• InfoCue - visible LED indicator