Searched for "40151500"
Removes Waste Water From Laundry Trays, Wet Bars, Sinks, Dehumidifiers and Other Applications Not Containing Large Quantities Of Solids. Includes 10 ft. Power Cord. Includes Cast Iron 1/3 HP Sump Pump #MS33PV1. Motor oil-filled for maximum heat dissipation and constant lubrication. Thermal overload protection with automatic reset. Fully assembled. Includes discharge pipe inside basin. Installs above floor.
- High-impact engineered resin, exterior hardware and stainless steel construction
- Piggyback-style float for automatic or manual operation
- Octagonal shape, compact size, 6 Gal. usable capacity
- Basin dimensions are 15-1/26 in. W x 13-3/4 in. H (11-9/16 in. from floor to center of inlet)
Leonard Lvc Checkstop Repair Kit
- Includes all necessary hardware for easy repair
- Sturdy stainless steel build ensures durability
- Resists corrosion to ensure safety and reliability
- Restores system to efficient performance
Utility gauge for commercial and industrial markets. This pressure gauge has a 15 psi/bar scale with a 2 in. dial and 1/4 NPT connection. It has a steel case, brass internals and plastic lens.
- 2 in. dial 1/4 NPT
- Accuracy 3-2-3% of span, ASME B40.1 grade B
- 15 psi/bar scale with no logo
- Black steel case with brass connection
Pressure Switches are used to control electrically driven water pumps, suitable for all types of pumps: jets, submersible, reciprocating, etc. Pressure switches are needed for rural water systems that rely on wells to supply their water. Water is pumped from the well or other water source to the pressure tank and as the tank fills the air in the tank becomes pressurized. When the pre-set pressure is reached, the pressure switch contacts open to stop the pump. When water is used, the pressure in the pressure tank falls and as it reaches the pre-set cut in pressure of the switch the contacts close, starting the cycle over. These pressure switches are easily adjusted by following instruction inside the switch cover.
- Standard duty
- NEMA type 1 indoor enclosure
- 2 pole, rated 1-1/2 HP at 115 Vac, 2HP at 230 Vac
- Pressure connection: 1/4 in. NPSF, pressure setting 20-40
- Adjustable cut in/out: cut out range 20-65 psig
Detectable 5 mil Underground Marking Tape, 3" x 1000' GAS
- Aluminum foil alerts about buried installation below
- Designed to identify, protect, and locate buried lines
- Black letters and colored background for clear visibility
- Designed for open trench applications
Pro Series Pumps High Water Alarm is designed to minimize the risk of water damage by acting as an early warning system. For over two decades the Pro Series Pumps High Water Alarm has been protecting from unwanted water damage. It can be placed next to a water heater, beneath a laundry tub, under a sink, behind a refrigerator, next to the air conditioner, anywhere where water or moisture can collect. All it takes is 1/32 in. of water to sound a loud 110 dB alarm, detecting water before mold can grow, or alerting you to potential flood conditions. It includes 6 ft of wire for extending the sensor too hard to reach locations. You can even increase the wire length up to 100 ft. The built in accessory jack allows for additional sensors or a high-water float.
- Battery operated alarm can detect as little as 1/32 in. of water
- Produces a loud 110 dB alarm that can be heard throughout the house to provide an effective early warning system
- Use in a variety of locations: in a sump pit, near water heaters, refrigerators or dishwashers, next to washing machines, under sinks, close to air conditioner drain tubes or wherever there is a risk of water damage
- Sensor wire extends 6 ft. and can be lengthened for hard to reach areas, accommodates the addition of more than 100 ft. of wire (additional 24-Gauge wire not included)
- Built in accessory jack allows for an additional 360 degree water sensor PS-WS360 or a high water float PS-WS (Item 3570418)
- Battery-saver feature only uses energy when the alarm is sounding to offer a long battery life
- Requires 9-Volt battery (not included)
- 5 Year limited warranty
Utility gauge for commercial and industrial markets. This pressure gauge has a 60 psi/bar scale and dry only. The dial size is 2 in. with a 1/4 NPT connection.
- 2 in. dial 1/4 NPT connection
- Accuracy 3-2-3% of span, ASME B40.1 grade B
- 60 psi/bar scale with no logo
- Black steel case with brass internals
The PHCC Pro Series High Water Alarm is designed to minimize the risk of water damage by acting as an early warning system. For over two decades The Pro Series High Water Alarm has been protecting from unwanted water damage. It can be placed next to a water heater, beneath a laundry tub, under a sink, behind a refrigerator, next to the air conditioner, anywhere where water or moisture can collect. All it takes is 1/32 in. of water to sound a 110 dB alarm, detecting water before mold can grow, or alerting you to potential flood conditions. It includes 6 ft. of wire for extending the sensor to hard to reach locations. You can even increase the wire length up to 100 ft.
- Battery operated alarm can detect as little as 1/32 in. of water
- Produces a loud 110 dB alarm that can be heard throughout the house to provide an effective early warning system
- Use in a variety of locations: in a sump pit, near water heaters, refrigerators or dishwashers, next to washing machines, under sinks, close to air conditioner drain tubes or wherever there is a risk of water damage
- Battery-saver feature only uses energy when the alarm is sounding to offer a long battery life
- Accommodates the addition of more than 100 ft. of wire (additional 24-Gauge wire not included)
- Requires 9-Volt battery (not included)
The Zoeller Tri-Check is a combination PVC check valve and ball valve for use with 2 in. discharge piping. It has a Glue x Glue Union Connection for easy installation. It has a full flow design for maximum performance.
- Full flow design
- Glue x Glue union connection
- Vertical or horizontal installation
- Includes ball valve for code requirements
The Pumptrol FSG2J21M4CP electromechanical pressure switch by Square D is the most trusted brand in residential, commercial and industrial pumping applications. This switch has a 30 psi to 50 psi pressure setting range activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached. The NEMA 1 enclosure has a 1/4 in. NPSF internal fluid connection and screw clamp terminals. The switch works with a 1.5 HP or less pump. The adjustable differential range is 15 psi to 30 psi and the cut-out range is 20 psi to 65 psi. The low-pressure cut-off (auto-start-off) operates at approximately 10 psig below the cut-in and will turn off the pump. The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratory (UL) Listed and Canadian Standards Association (CSA) Certified. For over 75 years, Square D pressure switches continue to meet the needs of our customers. Square D Pumptrol pressure switches are manufactured by Schneider Electric.
- If system pressure is lost for any reason, a low water condition for example, the automatic lower pressure/water cut-off feature will open the contacts, turning off the pump
- Universally accepted and recognized design is easy to wire, features drift proof cut-in and cut-out settings and has visible vertical contacts which are easy to inspect
- Switch is UL listed and Canadian Standards Association (CSA) certified
- Activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached
- Pressure switch is RoHS compliant, NSF certified to meet federal low lead requirements
Would you like to know if water gets too high in your sump or sewage pit? Is it code in your area to have a high water alarm on your sump or sewage pit? If so, the PS-WS is an accessory for The Pro Series Deluxe Float Controller (DFC2, VSC2, TSC2) that will activate a warning light, an audible alarm, send a signal to the remote terminal, and send information through the USB port when water reaches the sensor (allowing for text, email and in app notifications using the PS-WiFi). It simply attaches to the discharge pipe with included mounting hardware and the 10 foot cord plugs in at the bottom of the Deluxe controller. Between the visual light, audible alarm and optional text or email notifications (when using the PS-WiFi) you can be In the know when you are on the go.
- Will activate a warning light, an audible alarm, send a signal to the remote terminal, and send information through the USB port when water reaches the sensor
- For use with the pro series deluxe float controller (DFC2, VSC2, TSC2) or pro series water alarm (PWA2)
- Easily attaches to the discharge pipe with included mounting hardware
- 10 ft. cord with plug
Utility water test gauge. This gauge is used for pressure tests of residential and commercial water lines. This gauge has a 300 psi scale and a 3/4 in. female swivel connection for water lines.
- 3/4 in. female copper alloy swivel connection for water lines
- Top mounted to make it easy to read when connected
- Accuracy 3-2-3% of span, ASME B40.1 grade B
- 2-1/2 in. dial and 300 psi standard
Utility gauge for commercial and industrial markets. Black steel case, chrome bezel, copper alloy internals. This gauge has a 2 dial, 1/4 NPT, 100 psi/bar scale.
- 2 in. dial 1/4 NPT
- Accuracy 3-2-3% of span, ASME B40.1 grade B
- 100 psi/bar scale with no logo
- Black steel case with brass wetted parts
The sump pump check valve is installed in the discharge pipe in sump pump applications. The internal check valve keeps pump fluid from flowing back into the sump basin. Includes Stainless Steel hose clamps.
- Full port valve design
- Flapper is seated on a 15 degree angle to reduce water hammer when pump is shut off
- Design of the flapper prevents debris from building up or getting caught which ensures proper seating
- Made of durable ABS
- Maximum temperature 140 degree F (60 degree C)
Leonard Lvc Thermostatic Assembly Less Cover & Pointer
- Includes all necessary hardware for hassle-free installation
- Sturdy stainless steel build ensures durability
- Brass finish adds an attractive aesthetic appeal
- Restores system to efficient performance
This air valve provides a method of injecting and holding air pressure in water systems. Other uses include pressurizing piping systems for pressure test and blowing out irrigation lines. It is a general purpose valve.
- General purpose - 1/4 in. MPT tank valve
- Working pressure 0-200 psi
- Working temperature -40 degree F to +225 degree F
- Opening pressure 60 psi
- Lead free
The Zoeller 10-4012 High Level alarm is for use in sump and sewage applications. It uses 115-Volt AC power and also has battery back up power using (2) AA batteries. It comes with a tethered float switch.
- 115-Volt AC power
- Battery back up power using AA batteries
- For use in sump or sewage applications
- Tethered float switch included
Utility gauge for commercial and industrial markets. Black steel case, chrome bezel, copper alloy internals. This gauge has a 2 1/2 dial, 1/4 npt, 100 psi/bar scale.
- 2 12/ dial, 1/4 npt connection
- 100 psi/bar scale with no logo
- Accuracy 3-2-3% of span, ASME B40.1 Grade B
- Black steel case, brass internals, dry only case.
Pressure switches are used to control electrically driven water pumps, suitable for all types of pumps; jets, submersible, reciprocating, etc. Pressure switches are needed for rural water systems that rely on well to supply their water. Water is pumped from the well or other water source to the pressure tank and as the tank fills the air in the tank becomes pressurized. When the pre-set pressure is reached, the pressure switch contacts open to stop the pump. When water is used, the pressure in the pressure tank fall and as it reached the pre-set cut in pressure of the switch the contacts close, starting the cycle over. These pressure switches are easily adjusted by following instruction inside the switch cover.
- Standard duty
- NEMA type 1 indoor enclosure
- 2 pole, rated 1-1/2 HP at 115 Vac, 2HP at 230 VAC
- Pressure Connection: 1/4 in. NPSF, pressure setting 30-50
- Adjustable cut in/out: cut out range 20-65 psig
A Reliance Pump Tank is a must for any home that uses a pump to draw water from a well. We utilize a parabolic (cone-shaped) diaphragm that eliminates rubbing against itself or the tank wall, causing premature failure. A properly sized pump and pump tank will work as a team to meet your needs and deliver many years of dependable service.
- It ensures that your pump will run for at least one minute each time it cycles, as required by pump manufacturers
- It stores a supplemental water supply between pump cycles, to reduce the number of cycles throughout the day, and helps prolong pump life
- It helps maintain water pressure within your system, ensuring proper operation of your dishwasher and washing machine, and robust flow for showering and bathing
- Strong, flexible butyl diaphragm, powder-coated inner shell for permanent separation of air and water
Red spirit filled economy thermometer for commercial and industrial applications. This thermometer has a 5 in. scale and 2/125 in. copper alloy stem. The temperature range is 40/280 degree F and 15/135 degree C.
- Scale size 5 in. (127 mm) white painted steel with black markings
- Accuracy +/-1 scale division
- Scale dual scale degree F and degree C temperature range 40/280 degree F and 15/135 degree C
- Well brass or steel - includes thermowell
The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.
- High quality
- Reliable performance
- Durability
- Easy to install
Holds prime for jet well pumps and irrigation pumps. Heavy perforated solid brass strainer. Features include perforated steel screen strainer, poppet with Buna-N O-ring, stem guide and wide channel for maximum flow.
- Spring loaded
- 2 years warranty against defect
- Used with jet pumps
- Female NPT threads
The Zoeller 803-0001 1/2 HP Grinder pump is for sewage applications and grinds solids rather than passing them through. It has a Tri-Slice cutter for dependable operation. It operates on 115-Volt power and has an 1-1/4 in. discharge.
- Grinder pump grinds solids
- Integral float switch for automatic operation
- 1/2 HP, 7 Amp motor
- Cast iron construction
- Maintenance free - no need to add battery fluid or distilled water
- Compatible with all new PHCC Pro Series backup products
- Up to 50 hours of protection (based on a 10% duty cycle) on the PS-C33 combination and PHCC-2400 battery backup sump pump system
- Up to 60 hours of protection (based on a 10% duty cycle) on the PS-C22 combination and PHCC-1730 battery backup sump pump system
- Up to 100 hours of protection (based on a 10% duty cycle) on the PS-C11 combination and PHCC-1000 battery backup sump pump system
- Runs pump intermittently for days
Utility gauge for commercial and industrial markets. Black steel case, chrome bezel, copper alloy internals. 2 in. Dial 1/4 NPT 30 psi/bar.
- 2 in. dial 1/4 NPT 30 psi
- Accuracy 3-2-3% of span, ASME B40.1 grade B
- 30 psi/bar scale no logo
- Black steel case, chrome bezel, copper alloy inter
A Reliance Pump Tank is a must for any home that uses a pump to draw water from a well. We utilize a parabolic (cone-shaped) diaphragm that eliminates rubbing against itself or the tank wall, causing premature failure. A properly sized pump and pump tank will work as a team to meet your needs and deliver many years of dependable service.
- It ensures that your pump will run for at least one minute each time it cycles, as required by pump manufacturers
- It stores a supplemental water supply between pump cycles, to reduce the number of cycles throughout the day, and helps prolong pump life
- It helps maintain water pressure within your system, ensuring proper operation of your dishwasher and washing machine, and robust flow for showering and bathing
- Strong, flexible butyl diaphragm, powder-coated inner shell for permanent separation of air and water
This deep well air volume control prevents tanks from becoming air bound by maintaining proper air volume. Float operation open the air valve on water level drop (increase in tank air) and permits air to bleed from the tank to the atmosphere as the tank refills. Has a durable plastic housing with sealed plastic float, stainless steel rod and hardware.
- Deep well air volume control
- 1-1/4 in. MPT tank connection
- Durable plastic housing with sealed plastic float, stainless steel rod and hardware
- Housing is tapped with a 1/4 in. FPT pressure gauge port
The Pumptrol FSG2J21BP electromechanical pressure switch by Square D is the most trusted brand in residential, commercial and industrial pumping applications. The FSG2J21BP has a 30 psi to 50 psi pressure setting range activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached. The NEMA 1 enclosure has a 1/4 in. NPSF internal fluid connection and screw clamp terminals. The switch works with a 1.5 HP or less pump. The adjustable differential range is 15 psi to 30 psi and the cut-out range is 20 psi to 65 psi. The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratory (UL) Listed and Canadian Standards Association (CSA) Certified. For over 75 years, Square D pressure switches continue to meet the needs of our customers. Square D Pumptrol pressure switches are manufactured by Schneider Electric.The Square D by Schneider Electric Pressure Switch is compatible with jet pumps, submersible pumps and reciprocating pumps. The standard action contacts open on rising pressure.
- Suitable for jet pumps, submersible pumps and reciprocating pumps
- Standard-action contacts open on rising pressure
- 30 - 50 PSI
- 1/4 in. pressure connection
- Standard action contacts open on rising pressure
Utility gauge for commercial and industrial markets. Black steel case, chrome bezel, copper alloy internals. 2 in. dial with 1/4 NPT, dry only case.
- 2 in. dial size with standard 1/4 NPT
- Black steel case with brass wetted parts
- Glass lens
- Accuracy 3-2-3% of span, ASME B40.1 grade B
This float valve has a dual inlet thread for connecting the pipe. It provides support against tank walls. It has a 1/2 in. MIP connection.
- Do not use this product with water systems that convey or dispense water for human consumption
- High tensile serrated arms
- Machined flange
- Replaceable seals
The ZOELLER 105 Drain Pump allows you to remove water where there is no gravity flow. It utilizes the proven M53 effluent pump and will pass 1/2 in. solids. Includes a 30-0181 Check Valve.
- Compact design for inside cabinets
- Passes 1/2 in. solids
- P-Trap can be placed inside basin for small spaces
- Includes check valve
The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.
- High quality
- Replace old and worn parts
- No special tools needed
- Easy to install
The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.
- High quality
- Reliability
- Durability
- Attractive styling
The adjust-angle thermometer model AS5 has a black Aluminum case with glass front exclude dirt and dust. Connection comes standard with a swivel nut 1-1/4 in. - 18 in. NEF thread. This item also comes with a brass thermowell that has a 3/4 NPT connection. The stem length is 3-1/2 in. and the temperature range is 30/240 degree F.
- Simple adjustment just 2 screws permit case to be rotated 180 degree and stem to be positioned in 10 degree increments allowing user to select the most desirable viewing position
- Easy readability lens front blue liquid filled thermometer tube is mounted on V-shaped aluminum scale with bold black lines and numerals
- Accurate calibrated against standards traceable to the national institute of standards and technology and guaranteed accurate to plus or minus 1 scale division
- Construction black molded ABS case with glass front to exclude dirt and dust is standard, aluminum case is optional at additional charge, plastic face is optional at additional charge, ABS case should not be subjected to temperatures greater than 200 degree F
Leonard Control Rod Group Pam-11 Pv-Cr
- Bronze build provides durability
- Ideal for repairing PAM-II-ST old style thermostatic valve
- Resists corrosion to ensure safety and reliability
- Restores system to efficient performance
The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.
- High tensile serrated arms
- Machined flange for support against tank wall
- Replaceable seals
- Dual inlet thread for connecting pipe, locknut
The product is well made with good surface treatment. The product is easy to use and attractive styling. It's easy to handle and install. The product is wide selection of product choices and great value.
- Easy to install with little tools required
- Competitively priced
- High quality
- Reliability
A Reliance Pump Tank is a must for any home that uses a pump to draw water from a well. We utilize a parabolic (cone-shaped) diaphragm that eliminates rubbing against itself or the tank wall, causing premature failure. A properly sized pump and pump tank will work as a team to meet your needs and deliver many years of dependable service.
- It ensures that your pump will run for at least one minute each time it cycles, as required by pump manufacturers
- It stores a supplemental water supply between pump cycles, to reduce the number of cycles throughout the day, and helps prolong pump life
- It helps maintain water pressure within your system, ensuring proper operation of your dishwasher and washing machine, and robust flow for showering and bathing
- Strong, flexible butyl diaphragm, powder-coated inner shell for permanent separation of air and water
The Zoeller 10-0032 Variable Level Float Switch is Normally Open (NO) and rated at 15 Amp with 115-Volt AC power supply. The switch plugs into the wall outlet and the pump lugs into the switch. The item has a 15 in. cord length.
- 115-Volt AC power
- 15 Amp rated
- 15 in. cord length
- Piggyback design
Zoeller M267, 1/2 HP Submersible Sewage, Effluent, Dewatering Pump. Automatic Switch, 115-Volt, with 10 ft. Cord. 2 in. Discharge and passes 2 in. Solid.
- Passes 2 in. spherical solid
- All cast iron construction
- Non-clogging vortex impeller
- Heavy duty split phase motor
The Pro Series Pump Alternator and Alarm System is ideal for those wishing to maintain 2 pumps in the same pit. The alternator lengthens the life of both pumps by alternating usage, running 1 pump at a time. If a pump or float fails, the system will alert with a visual and audible alarm that high water is present and let you know which pump is failing. The system will then allow the other pump and the second float to keep everything dry. In addition, it has a remote terminal allowing for connection to external devices, such as, one of the Pro Series Pumps CONNECT modules, a home security system, home automation system, or other device for remote notification. Now you can be in the know when you are on the go.
- Can be used in sump, sewage and effluent applications
- If 1 pump fails the other pump will take over and an audible alarm will sound
- Alerts to pump failure, high water and system operation
- Remote terminal allows the unit to connect to any Pro Series Pumps connect module, security system, home automation system or other device
- Vertical switches can be unplugged from the alternator for easy installation
- Angled receptacles to accept a standard or right-angled pump plugs
- 9-Volt battery back-up for "high water alarm" alarm
- Designed to run on a standard 15 Amp, 120-Volt circuit
The 6 Qt. Battery Acid pack (Z-Pack) is designed for use with Basement Watchdog 30HDC140S and 24EP6 Standby Batteries. The flexible pour spout helps easily activate the standby batteries. Basement Watchdog batteries are shipped dry (without acid) so they will never lose power before you take them home. By adding the acid just before use, the battery will always be fresh.
- Activates basement watchdog standby batteries
- Flexible pour spout
- 6 qt. included
- 1 package of battery fluid required per basement watchdog battery
- Tank connection: 1" MPT
- In-line connection: 1" MPT x 3/4" FPT
- Centre end length: 10"
- Drain/relief ports: (2) 1/2"
- Accessory ports: (2) 1/4"
- Lead free
These heavy-duty, non-corrosive, NSF Listed float valves are constructed of PVC with lead-free 18-8 stainless steel components. Free discharge flow capacity of 27.5 GPM at 30 psi and 37 GPM at 60 psi, with a maximum inlet pressure of 100 psi. Maximum working temperature is 100 degree F.
- 3/4 in. PVC adjustable float valve
- NSF Listed, prop 65 compliant
- Maximum inlet pressure 100 psi
- Maximum temperature 100 degree F
- Flow capacity 37 GPM at 60 psi
- 1/4 in. NPT float rod connection
The Pro Series Pumps Deluxe Dual Float Controller (DFC2) is a premium product. It has a cage that protects the 2 micro reed switches. The second float acts as a fail-safe, providing redundancy. The dual float simply mounts to the discharge pipe, at the activation height of your choosing, with the included stainless steel hose clamp and is a piggy-back switch making it compatible with most sump pumps. For easy installation the float switch can be unplugged from the controller, the run time is adjustable (after the float drops), and the controller has universal mounting tabs. For superior user functionality, the DFC2 exercises the sump pump weekly to extend pump life and has a system operating light to display that the control box is operating properly. It also monitors pump and power conditions, sounds an alarm when problems are detected, and gives a visual light that pinpoints the remedy. Plus, it has a USB Data Port and Remote Terminal to connect to external devices, such as, one of the Pro Series Pumps Connect modules, a home automation system, or other device for remote notification.
- 2 float switches for added protection and redundancy
- Primary float switch activates the pump when water reaches the float
- Secondary float acts as a fail-safe for the first
- Sounds an alarm and alerts when power has failed, a pump or float problem is detected or the battery is low
- USB data port and remote terminal connect to external devices such as the PHCC Pro Series Pumps connect modules, home automation systems or other devices for remote notification
- Exercises the pump weekly to extend pump life
- Adjustable run time (after the float drops) from 5-45 seconds
- Adjustable to any activation height using included stainless steel hose clamp
- Float switch can be unplugged from controller for easy installation
- Optional high water accessory available (PS-WS)
- Warranty matches the Pro Series pump it is purchased with, otherwise a 1-year warranty applies
A Reliance Pump Tank is a must for any home that uses a pump to draw water from a well. We utilize a parabolic (cone-shaped) diaphragm that eliminates rubbing against itself or the tank wall, causing premature failure. A properly sized pump and pump tank will work as a team to meet your needs and deliver many years of dependable service.
- It ensures that your pump will run for at least one minute each time it cycles, as required by pump manufacturers
- It stores a supplemental water supply between pump cycles, to reduce the number of cycles throughout the day, and helps prolong pump life
- It helps maintain water pressure within your system, ensuring proper operation of your dishwasher and washing machine, and robust flow for showering and bathing
- Strong, flexible butyl diaphragm, powder-coated inner shell for permanent separation of air and water