The product is high quality and reliability and durability. The product is easing to use and attractive styling. The product is wide selection of product choices and great value.

• High quality
• Reliability
• Durability
• Attractive styling
• Wide selection
• Easy to install

The Danco 2-3/4 Stainless-Steel Bathtub Mesh Strainer helps prevent clogged drains. This tub drain protector sits on top of your bathtub drain trim so it is easy to put into place and remove for easy cleaning. No more removing slimy, gunky "in-drain hair catchers that are smelly and gross to clean. This bathtub strainer is ideal to place in your tub drain to catch unwanted hair, soap particles and debris from flowing down your sink drain which can cause a clogged drain while allowing water to pass through keeping the drain flowing freely. The durable stainless steel mesh construction provides strength for everyday use.

• PREVENT CLOGGED DRAINS: Placing a mesh strainer, hair catcher in your bathroom tub drain allows water to flow freely while it catches unwanted hair and other debris that can clog your bathtub drains
• UNIVERSAL FIT: The 2-3/4 in. outer diameter allows for use in most standard bathroom tub drains
• EASY TO USE: Features a DROP-IN design that can be easily set in place and removed without any adjustments needed or tools required
• CLEANS EASILY: Throw away hair and particles in the trash and simply rinse off and it cleans easily in your dishwasher
• COROSION RESISTANT: This bathtub strainer mesh design is rust and stain resistant
• HIGH QUALITY: The tub strainer is constructed of durable stainless-steel mesh which provides strength and reliability through everyday use
• STAINLESS STEEL FINISH: The stainless-steel finish will complement your existing bathroom decor'
• Rust and stain resistant
• Easy to use, empty and clean; dishwasher safe

The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.

• Chrome plated
• ABS body
• Volume control to fit 1/2 in. IPS connection
• Easy installment
• Friendly use
• Superior quality

The Lenape White Ceramic Towel Rack measures 24 in. long. The two high-fired white glazed ceramic posts are easily wall mounted with the included hardware. The 24 inch white plastic towel bar can be cut to your exact size with a fine tooth saw.

• High-fired white glaze
• Durable
• Easy to clean
• Easy DIY installation
• Towel bar can be cut to your exact requirements
• All installation hardware is included

The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.

• High quality
• Durable construction
• Affordably priced
• Attractive styling
• Wide selection
• Great buy

Lift-and-Turn Waste and Overflow Kit. Sch 40 Bath Waste. Brass Lift and Turn Dra in.

• Lift-and-turn waste
• Overflow kit
• Sch 40 bath waste
• Brass lift and turn drain
• ABS material
• 1-hole faceplate

KEENEY 41-16ABS double ended extension tube is 16 in. long with 1-1/2 in. inlets and included reducing washer for 1-1/4 in. connections. It is constructed of durable black polypropylene for long-lasting use. Cutting the tube in half offers two parts in one to complete multiple projects. All necessary nuts and washers are included. You can install with confidence knowing KEENEY stands by its products with a Limited Warranty.

• Double end extension tube for slip joint
• Inlets: 1-1/2 in. or 1-1/4 in.
• Length: 16 in.
• Durable black polypropylene construction
• Can be cut in half for two parts
• Includes nuts, washers, and a reducing washer

Metcraft Pvk-1 Pnuematic Top Assembly

The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.

• High quality
• Reliability
• Durability
• Attractive styling
• Wide selection
• Great value

This 5/8 in. washer for Z-1203 carrier cap nut is brass. It is a universal fit. It includes 4 easy to install sets.

• Includes 4 cap nuts and 4 washers
• 5/8 in. x 11 N.C.
• Washer only for carrier capnut
• Thread plastic washer also available separately
• Fits most other carriers
• Saves time and money

The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.

• Fashion design
• User friendly
• Easy installation
• Durability
• Wide selection
• No special tool required

The Delta Classic 4 in. 2-Handle Mid-Arc Bathroom Faucet in Chrome sports an understated design that offers lasting durability and performance. Constructed of solid brass and featuring easy-to-use blade handles, this faucet combines style with function. The clean, simple look and chrome finish complement virtually any bathroom.

• 2-handle blade lever design for ease of use
• 1.2 GPM mid-arc spout is simple but tough
• Solid brass construction ensures quality and reliability
• Durable, self-lubricated seats for reliability and longer life
• WaterSense certified to promote water conservation
• WaterSense certified to help reduce water use
• ADA-compliant lever handle
• Includes metal pop-up drain assembly
• Lifetime limited guarantee covers parts and finish defects

This Commercial 4 in. 2-Handle High Arc Bathroom Sink Faucet in Chrome goes beyond providing exceptional commercial-grade performance with a product that reflects the personality of the individual institution. Delta believes there is a better way to live with water and has developed smart solutions that meet the unique requirements presented by each commercial environment. Providing individuals with a better way to experience water, while standing up to prolonged, rigorous use. And, all Delta commercial products are backed by the industry's best 5-year limited warranty.

• For use in non-residential applications
• CER-TEK ceramic valuing
• Pop-up drain assembly not included
• Heavy-duty cast brass sink faucet
• Metal hold-down package
• ADA-compliant sanitary-hoods color-indexed vandal-resistant lever handles included
• 5-year limited warranty for usage in industrial, commercial or business applications

Try our Add-A-Line Full-Slip Valve tee. This valve features a one piece forged brass compression and sweat tee body. It's 7/8 in. compression trunks provide easy and totally torchless installations.

• Adding water lines has never been easier
• Perfect for adding humidifiers, dishwashers, or ice makers
• Quality brass ball valve replaces cheap saddle valves that leak and clog
• Compression trunks are perfect for adding lines near HVAC or plastic drainage pipe that may get damaged by a soldering torch
• Very durable
• Torchless installations

The Rheem Professional Classic 38 Gal. Electric short water heater provides an ample supply of hot water for households with 2 to 4 people. This unit comes with two 4500-Watt elements and an automatic thermostat which keeps the water at the desired temperature. A 208-Volt electrical connection is required for installation. A premium grade anode rod provides long-lasting tank protection. Factory installed temperature and pressure relief valve and 3/4 in. water connections are included with the water heater for easy installation. This model has a 6-year limited tank and parts warranty. A 2.5 in. insulation blanket is included with this model for added efficiency.

• Electric water heater is easy to maintain
• Delivers 45 Gal. of hot water in the first hour
• 6-year limited warranty on tank and parts for your convenience
• Over-temperature protector cuts off power in excess temperature situations
• Short tank fits in tight applications
• 0.93 uniform energy factor signifies an energy efficient water heater
• Meets or exceeds NAECA requirements
• Dual 4500-Watt heating elements
• Automatic thermostat keeps water at your desired temperature
• Requires a 208-Volt connection for installation
• If heating elements of different wattages than those shown are demanded by zone requirements, they must be specifically requested

The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value. This item is made in Taiwan.

• Fine surface
• Reliability
• Affordably priced
• Attractive styling
• Easy to install with little tools required
• Great value

The NIBCO PVC DWV male adapter is used in residential and commercial drain, waste and vent systems. The PVC DWV male adapter features a hub x male NPT thread connection and provides a means for adapting a solvent weld connection to a threaded connection. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.

• PVC requires a primer before cementing
• For above-ground DWV
• Adapts PVC pipe to standard female pipe threads using solvent
• Smooth interior finish for reduced friction and material buildup
• Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
• Do not test or use with compressed air or other gases
• Maximum service temperature 140 degree F

The NIBCO lead-free brass ball valve with threaded end connections provides bubble-tight shutoff. The valve's PTFE seats and lead free ball exhibit high corrosion resistance properties. The valve is ideal for hot/cold water and gas applications. The NIBCO lead-free brass ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features threaded end connections for easy installation.

• Lead free
• Full port
• Blowout-proof stem
• IAPMO listed to NSF/ANSI-61-8, NSF/ANSI-372 and UPC-IGC-157
• CSA ANSI Z21.15 / CSA 9.1
• CSA ASME B16.44: 5 psig (maximum)
• CSA ASME B16.33: 125 psig (maximum)
• CSA CAN / CGA 3.16
• CSA CGA CR91-002: 1/2 psig, 2 psig and 5 psig
• FM 1140 approved 175 wwp
• UL 1477 (YQNZ): compressed gas shutoff valves 250 psi
• UL 842 (YRPV): gas shutoff valves 250 psi
• UL 842 (YRBX): flammable liquid shut off valves 250 psi
• UL 842 (MHKZ): manual valves 250 psi
• UL 125 (YSDT): LP-gas shutoff valves 250 psi
• UL subject 258 (VQGU): trim and drain valves
• Valve pressure rating 600 psi/41.4 bar non-shock cold working pressure

The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.

• Durability
• No special tools needed
• Easy to install
• High quality
• Cost saving solution
• Attractive styling

The plastic hood termination can be used to conceal PVC/CPVC piping to provide a clean, sleek finish to your venting system. The product itself is made out of PVC material. It is ideal for horizontal terminations.

• 3 in. PVC compatible
• 4 in. PVC compatible
• Not approved for Canada
• 1 year warranty
• 3 in. CPVC compatible
• 4 in. CPVC compatible
• Weather resistant
• For horizontal terminations
• Prevents heavy rain and snow entering water heater
• Prevents debris from entering water heater

The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value. This item is made in Taiwan.

• High quality
• Reliability
• Affordably priced
• Cost saving solution
• Wide selection
• Great value

ApolloPEX is cross-linked polyethylene tubing designed for use within potable water piping systems. ApolloPEX Pipe provides superior durability, corrosion resistance and flexibility for the most demanding environments. ApolloPEX is available in red, white and blue for the simple identification of cold water, hot water and main water lines. The ApolloPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

• Superior flexibility reduces the number of fittings required for installation which also reduces leak points within piping systems
• Durable and corrosion resistant pipe endures most installation environments
• Suitable for wet or dry installations and immediate pressure testing
• Compatible with ApolloPEX system fittings and tectite by Apollo push-to-connect fittings
• Listed to NSF 14 and CSA B137.5 for use in potable water distribution piping systems
• Center-pull coil speeds installation
• Available in coils (25 ft. - 500 ft.) and sticks (2 ft. - 20 ft.) some sizes special order only
• Pressure & Temperature: 160 psi @ 73° F, 100 psi @ 180° F
• Designed, manufactured and tested to meet or exceed the requirements of ASTM F-876/877/2023 and CSA B137.5
• The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring, or behind wallboard or plaster
• Type B cross-linked polyethylene

The Apollo Expansion PEX 1/2 in. x 3/4 in. Brass PEX-A Reducing Barb Coupling is simple to install. Apollo Expansion PEX barb fittings are a key component to one of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, Apollo Expansion PEX couplings must be secured into place Apollo Expansion PEX sleeves or comparable expansion-type sleeve or ring (all sold separately). The Apollo Expansion PEX system is a comprehensive piping system comprised of lead free brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex. A cold-expansion tool (sold separately) is required for installation.

• Compatible with Uponor and Wirsbo PEX piping systems
• Larger internal diameter of Apollo expansion PEX fittings results in a 25% greater flow rate within the system
• Constructed of lead free DeZincification Resistant (DZR) brass for superior reliability and strength
• Cold-expansion tool (sold separately) is required for installation
• Meets or exceeds ASTM F1960 standard
• Meets UPC, IPC, and cUPC standard requirements
• Must secured in place using Apollo Expansion PEX sleeves or other PEX-A expansion sleeves/rings
• NSF Listed
• Barb x barb connection for PEX-A plumbing systems
• Go/no-go gauges are never required
• To ensure secure connections every time, fittings cannot be dry fit
• Rated to 200 degree F and 200 psi
• Item is not compatible with PEXb pipe, crimp-style (ASTM 1807) or pinch clamp (ASTM F2098) piping systems

Would you like to know if water gets too high in your sump or sewage pit? Is it code in your area to have a high water alarm on your sump or sewage pit? If so, the PS-WS is an accessory for The Pro Series Deluxe Float Controller (DFC2, VSC2, TSC2) that will activate a warning light, an audible alarm, send a signal to the remote terminal, and send information through the USB port when water reaches the sensor (allowing for text, email and in app notifications using the PS-WiFi). It simply attaches to the discharge pipe with included mounting hardware and the 10 foot cord plugs in at the bottom of the Deluxe controller. Between the visual light, audible alarm and optional text or email notifications (when using the PS-WiFi) you can be In the know when you are on the go.

• Will activate a warning light, an audible alarm, send a signal to the remote terminal, and send information through the USB port when water reaches the sensor
• For use with the pro series deluxe float controller (DFC2, VSC2, TSC2) or pro series water alarm (PWA2)
• Easily attaches to the discharge pipe with included mounting hardware
• 10 ft. cord with plug

Install a grab bar securely anywhere on the wall with SecureMount Anchors. Precision engineered for optimal bracing behind the wall, SecureMount anchors allow for easy grab bar installation with no studs required. Installation is as easy as 1-2-3. Just drill the hole, install anchor and mount the grab bar. Can be quickly and easily installed anywhere on the wall, on or off studs.

• SecureMount anchors can be used when a wood stud is not available
• Designed for use only when securely installed in approved substrates for persons no more than 300lbs
• Approved substrates include ½" drywall, ½" drywall with tile, ½" drywall with marble, 5/8" drywall, 5/8" drywall with tile, 5/8" drywall with marble, 1/8" fiberglass tub surround and ¼" fiberglass tub surround
• Mounts securely to a variety of substrates, including multiple layers up to 1-1/2 in. T
• Requires a 3-1/2 in. space behind the wall
• Moen SecureMount anchors meet or exceed ADA standards
• Also available in a 1-Pack, Moen SMA1005CH

Public Rest Room, Wash Room or Bath Room replacement toilet partition part. Will replace a variety of different brands. Order special security fasteners if not supplied with the part.

• Made of zinc
• Fasteners not included, order separately
• Surface mounted
• When replacing, check for other broken or worn parts

The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.

• High quality
• Reliability
• Durability
• Attractive styling
• Wide selection
• Great value

The 1/2 in. SharkBite Push-Fit x FNPT Adapter allows you to make a connection to 1/2 in. pipe using a push-fit connection and then gives you a 1/2 in. Female NPT Adapter on the opposite end. SharkBite fittings are the easiest way to join copper, cPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite Fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.

• Lead free DZR brass construction for durability and reliability
• Use to connect to any combination of copper, PEX, CPVC, or PE-RT pipes
• Innovative push-to-connect design makes for quick and easy installation
• Push-to-connect fittings require no solder, glue, unions, or tools
• Rated to 200 degree F and 200 psi
• Meets all UPC, IPC and cUPC requirements

Trade size 3/8 Flat washer. Prevents leaking and provides positive shutoff for your faucet. Easy and inexpensive alternative to replacing the faucet.

• Use for quick opening style faucets
• Tough, positive shut-off
• High abrasive resistance
• High temperature resistance
• 100 per bag
• California residents see prop 65 warnings

The Rheem PROTECH Gas Control Replacement Kit contains everything that you need to replace the Gas Valve on your Rheem gas water heater. The part is required anytime the cag control is damaged or needs replacing. The gas valve kit ensures the safe and reliable operation of your gas water heater.

• Direct replacement for Rheem, Ruud and Richmond gas water heaters
• Works on models: PROG50-42N RH67 PV
• Kit includes: gas valve and instructions
• Use only on Rheem water heaters
• Genuine OEM replacement kit
• Robust design
• Made of steel and plastic
• Repair your water heater with peace of mind using genuine Rheem parts
• 1 year limited warranty
• California residents see prop 65 warnings

The 3/4 in. male sweat x 3/4 in. barb copper adapter fitting offers contractors labor savings and flexibility, ideal for commercial or residential projects. Designed to fit inside a wrought copper fitting and with PEX systems, the innovative construction eliminates the need for soldering, heating, or specialty tools. The lead-free cooper material delivers dependability for building owners. High-temp and freeze-resistant materials allows for adaptation to hot and cold water applications.

• High-temp and freeze-resistant materials adapt to both hot and cold water applications for PEX systems
• Crimp installation eliminates the need for soldering, heating or specialty tools
• Cooper construction holds up to years of use and ensures sanitation
• Pressure ratings of up to 80 psi at 200 degree F handles the high demand of commercial usage
• NSF 61-certified
• 25-year warranty proven to last the lifetime of the building

Thin, 1-1/2 in. x 1-1/4 in. 3/16 in. Thick I.D. 1-7/32 in., O.D. 1-23/32 in. to fit all your commercial and residential needs. Easy to install,.

• Ideal for white plastic, tubular slip joint connections
• Highly durable polypropylene plastic construction
• Super-easy installation
• Available in 1-1/4 in. and 1-1/2 in. inlet
• For use with slip joint connections
• Rubber made

Set it and forget it with the reliable Viper 1.28/1.6 GPF Toilet. The tall, narrow designed Viper tank optimizes flush speed and quickly refills using a trusted, industry best, Fluid master. 400A Fill Valve. Powerful front rim jets maintain a clean and sanitary bowl with every flush. An exclusive multi-point mounting system and non-corrosive brass tank-to-bowl bolts ensure long lasting stability and ease of installation, making Viper the professional's choice.

• Use with Gerber tanks 2463442, 2463443, 2463441, 2463445, and 2463444
• Standard Height Elongated Bowl
• 2 in. fully glazed trapway for clog-free waste removal
• Large dual fed siphon jets increases the speed of the flush, for a quick and clean bowl every time
• Large water surface to thoroughly rinse bowl with each flush
• 1.28 GPF and 1.6 GPF
• Drain line carry 50 feet
• Industry map rating: 1000g
• 10", 12", 14" Rough-In
• Toilet seat not included
• WaterSense certified when used with Gerber tank 2463445, and 2463444
• Limited Lifetime on Vitreous China, refer to attached warranty for more details
• cUPC Certified, and meets CSA and UPC Standards

Streamline Copper Fittings have been the leading brand of copper fittings for over 80-years. Our product selection has grown to become the most extensive in the industry. Quality, consistency and reliability have made the Streamline brand trusted and specified all around the world.

• For use in above-ground potable water supply systems
• UL recognized to 700 psi
• Constructed of high-grade copper or bronze materials
• Made to applicable ASME standards B16.15, B16.18, B16.22, B16.24, B16.50, B1.20.1
• Wrot fittings meet NSF 61G
• Specified brand of industry professionals

Set it and forget it with the reliable Viper 1.6 GPF (6 Lpf) Toilet. The tall, narrow designed Viper tank optimizes flush speed and quickly refills using a trusted, industry best, Fluidmaster 400A Fill Valve. Powerful front rim jets maintain a clean and sanitary bowl with every flush. An exclusive multi-point mounting system and non-corrosive brass tank-to-bowl bolts ensure long-lasting stability and ease of installation, making Viper the professional's choice.

• Use with Gerber Viper bowls VP-21-552, VP-21-562, VP-21-528
• Color-matched, metal tank lever with solid durable brass arm
• 3 in. flush valve for faster water flow and flushing power
• 1.6 gpf (gallons per flush), save up to 13,200 gallons per year (vs 3.5 gpf toilet)
• 12" Rough-in
• Best-in-Class Fluidmaster 400A Fill Valve for durable, long lasting anti-siphon operation and easy replacement
• Double nut, multi-point tank-to-bowl mounting system for easy tool-free installation
• Corrosion resistant flapper
• Drain line carry 50 feet
• ADA Compliant
• Limited Lifetime on Vitreous China, refer to attached warranty for more details
• cUPC Certified, and meets CSA and UPC Standards

This pipe fitting is easy to use for both contractors and the do-it-yourself. Ideal for use with copper, brass, iron pipe on oil. Not for underground use.

• Withstand temperatures up to 212 degree F
• Pressure up to 400 psi
• 2-year warranty against defect
• Do not over-tighten
• Red brass
• Nipple

This pipe fitting is easy to use for both contractors and the do-it-yourself. Ideal for use with copper, brass, iron pipe on oil. Not for underground use.

• Withstand temperatures up to 212 degree F
• Pressure up to 400 psi
• 2-year warranty against defect
• Do not over-tighten
• Red brass
• Nipple

This 3/8 in. compression connector features a solid brass construction. It is chrome plated finish. It can be used in both indoors and outdoors.

• Made of brass
• Lead free
• Fittings
• Chrome plated
• Individually packed
• Solder

As a professional plumber, this is the kind of parts we use daily to fix most Delta faucets. The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.

• Easy install
• Reliability
• Durable
• Attractive styling
• Wide selection
• Great value

The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.

• Superior quality
• Easy installment
• Good plated quality
• Friendly use
• Excellent package
• Good looking

The ¾ in. barb x ½ in. barb brass elbow fitting offers contractors labor savings and installation flexibility, ideal for hospital or residential projects. Used to make sharp 90 degree turns, the fitting doesn't require soldering, heating, or specialty tools for speedy installation. The lead-free eco-brass construction delivers dependability and peace of mind for building owners. High-temp and freeze-resistant materials allows for adaptation to hot and cold water applications for PEX systems.

• High-temp and freeze-resistant materials adapt to both hot and cold water applications for PEX systems
• Crimp installation eliminates the need for soldering, heating or specialty tools
• Lead-free, eco-brass construction holds up to years of use and ensures sanitation
• 90 degree bend allows for sharp turn flow of potable water from a single indoor main line
• Pressure ratings of up to 80 PSI at 200 degree F handles the high demand of commercial usage
• NSF 61-certified
• 25-year warranty proven to last the lifetime of the building

The Everbilt Lead Free Ball Valve with Drain is constructed of heavy forged brass and has a lever handle with Female connections on both ends. Designed for residential and commercial use on water air, steam, oil or gas. Full port for maximum flow and minimum pressure drops. This multi-purpose manual lever ball valve has excellent corrosion resistance and is fit for many applications.

• Extremely low return rate
• Forged brass construction
• Lead free design is suitable for all potable water supply installations
• Easy quarter-turn operation
• Suitable for oil, water and gas
• Side tap allows non-pressure side to be drained when valve is in the closed position
• Threaded connections

Southland offers both black and galvanized welded steel nipples in 15 diameters from 1/8 in. to 6 in. and with different lengths ranging from Close up to 12 in. Available individually or in pre-packaged assortments, we also offer a full selection of ready cut welded steel pipes in the same diameters lengths ranging from 18 up to 72. All galvanized are zinc coated for use in water applications complying with the NSF 372 lead-free requirements.

• ANSI/ASME B.16.3, B-16.14, B16-39 and Threads: ANSI B1.20.1
• Steel nipples/Pre-Cut Pipe meet material: ANSI/ASTM A.733.A5320; Threads: ANSI B1.20.1
• Galvanized Steel Nipple can be used in residential drainage and potable water applications. The nipple can be used to repair pipe or make an extension from a fitting or existing pipe.
• Nipple complies with NSF 372 lead free
• Long useful life
• Easy to install, ready to use

The Apollo ExpansionPEX 1/2 in. Brass PEX-A Barb x 3/4 in. Reducing Female Sweat Adapter is simple to install is designed as an economical solution for the transition from copper tubing to PEX-A tubing. Apollo ExpansionPEX barb fittings are a key component to one of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, Apollo ExpansionPEX couplings must be secured into place Apollo ExpansionPEX sleeves or comparable expansion-type sleeve or ring (all sold separately). The Apollo ExpansionPEX system is a comprehensive piping system comprised of lead free brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex. A cold-expansion tool (sold separately) is required for installation.

• Individually bagged
• Larger internal diameter of Apollo ExpansionPEX fittings results in a 25% greater flow rate within the system
• Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength
• Cold-expansion tool (sold separately) is required for installation
• Meets or exceeds ASTM F1960 standard
• Meets UPC, IPC and cUPC standard
• Must secured in place using Apollo ExpansionPEX sleeves or other PEX-A expansion sleeves/rings
• NSF listed
• Barb x solder connection for PEX-A plumbing systems
• Go/no-go gauges are never required
• To ensure secure connections every time, fittings cannot be dry fit
• Rated to 200 degree F and 200 psi
• Item is not compatible with PEXb pipe, crimp-style (ASTM 1807) or pinch clamp (ASTM F2098) piping systems

• Superior full port potable water connectors for water heaters and water treatment. Connectors are more bendable and flexible than copper. They will not discolor corrode rust crimp or kink.
• 1 in. x 18 in. Corrugated Stainless Steel Flexible Water Connector
• Best For Installation Water Heaters And Water Softeners
• Product Made Of Corrugated Stainless Steel
• This Product Has No Plastic Hose Or Insert To Reduce Flow
• Product Is Environmentally Friendly
• Lifetime Warranty
• Flows More Than Any Other Type
• Will Not Burst
• High Temp Epdm Washer
• Resists Work Hardening
• Working Pressure 200 Psi
• Burst Pressure Approximately 1850 Psi
• 100% Leak Tested
• No Sweat Installation
• Temperature Rating -40 Degree F To 250 Degree F
• MFG# SWC1-18

Seasons® Ceramic Cartridge Cold

• Cold Cartridge
• 1/4 Turn
• Reliable Fit
• For Seasons Faucets Only
• Includes cartridge only
• Fits: Caliber 126171, 126172, 126177, 126178, 126179, 126180, 126187, 126188, Charlestown 110701, 110702, 110704, 110705, 120335LF, 120336LF, 120338LF, 120339LF, 120341LF, 120342LF, 120344LF, 120345LF, Essen 120095, 120096, 120331LF, 120332LF, Wellington 119261, 119262, 119263, 119264, 119265, 119266, 119267, 119268, 119269, 119270, 119271, 119272, 119279, 119280, 119281, 119282 and Westlake 120445LF, 120446LF, 120447LF, 120448LF, 120461LF, 120463LF, 120464LF

Can be used which makes them an economical choice. For use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared. Not for underground use.

• Withstand temperatures up to 212 degree F
• Pressure up to 150 psi
• Brass
• 2-year warranty against defect
• Leaded
• Adapter

Fix your copper pipe with the Mueller 3/4 in. Copper Cap. This copper fitting is constructed of Wrot Copper for long lasting durability and strength. The design meets all applicable plumbing standards.

• For use in above-ground potable water supply systems
• UL recognized to 700 psi
• Constructed of high-grade copper or bronze materials
• Made to applicable ASME standards B16.15, B16.18, B16.22, B16.24, B16.50, B1.20.1
• Wrot fittings meet NSF 61G
• Specified brand of industry professionals