Plumbing
The product is high quality and reliability and durability. The product is easing to use and attractive styling. The product is wide selection of product choices and great value.
- High quality
- Reliability
- Durability
- Attractive styling
- Wide selection
- Easy to install
The Danco 2-3/4 Stainless-Steel Bathtub Mesh Strainer helps prevent clogged drains. This tub drain protector sits on top of your bathtub drain trim so it is easy to put into place and remove for easy cleaning. No more removing slimy, gunky "in-drain hair catchers that are smelly and gross to clean. This bathtub strainer is ideal to place in your tub drain to catch unwanted hair, soap particles and debris from flowing down your sink drain which can cause a clogged drain while allowing water to pass through keeping the drain flowing freely. The durable stainless steel mesh construction provides strength for everyday use.
- PREVENT CLOGGED DRAINS: Placing a mesh strainer, hair catcher in your bathroom tub drain allows water to flow freely while it catches unwanted hair and other debris that can clog your bathtub drains
- UNIVERSAL FIT: The 2-3/4 in. outer diameter allows for use in most standard bathroom tub drains
- EASY TO USE: Features a DROP-IN design that can be easily set in place and removed without any adjustments needed or tools required
- CLEANS EASILY: Throw away hair and particles in the trash and simply rinse off and it cleans easily in your dishwasher
- COROSION RESISTANT: This bathtub strainer mesh design is rust and stain resistant
- HIGH QUALITY: The tub strainer is constructed of durable stainless-steel mesh which provides strength and reliability through everyday use
- STAINLESS STEEL FINISH: The stainless-steel finish will complement your existing bathroom decor'
- Rust and stain resistant
- Easy to use, empty and clean; dishwasher safe
The Lenape White Ceramic Towel Rack measures 24 in. long. The two high-fired white glazed ceramic posts are easily wall mounted with the included hardware. The 24 inch white plastic towel bar can be cut to your exact size with a fine tooth saw.
- High-fired white glaze
- Durable
- Easy to clean
- Easy DIY installation
- Towel bar can be cut to your exact requirements
- All installation hardware is included
The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.
- High quality
- Durable construction
- Affordably priced
- Attractive styling
- Wide selection
- Great buy
KEENEY 41-16ABS double ended extension tube is 16 in. long with 1-1/2 in. inlets and included reducing washer for 1-1/4 in. connections. It is constructed of durable black polypropylene for long-lasting use. Cutting the tube in half offers two parts in one to complete multiple projects. All necessary nuts and washers are included. You can install with confidence knowing KEENEY stands by its products with a Limited Warranty.
- Double end extension tube for slip joint
- Inlets: 1-1/2 in. or 1-1/4 in.
- Length: 16 in.
- Durable black polypropylene construction
- Can be cut in half for two parts
- Includes nuts, washers, and a reducing washer
Metcraft Pvk-1 Pnuematic Top Assembly
The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.
- High quality
- Reliability
- Durability
- Attractive styling
- Wide selection
- Great value
Lift-and-Turn Waste and Overflow Kit. Sch 40 Bath Waste. Brass Lift and Turn Dra in.
- Lift-and-turn waste
- Overflow kit
- Sch 40 bath waste
- Brass lift and turn drain
- ABS material
- 1-hole faceplate
This 5/8 in. washer for Z-1203 carrier cap nut is brass. It is a universal fit. It includes 4 easy to install sets.
- Includes 4 cap nuts and 4 washers
- 5/8 in. x 11 N.C.
- Washer only for carrier capnut
- Thread plastic washer also available separately
- Fits most other carriers
- Saves time and money
The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.
- Chrome plated
- ABS body
- Volume control to fit 1/2 in. IPS connection
- Easy installment
- Friendly use
- Superior quality
The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.
- Fashion design
- User friendly
- Easy installation
- Durability
- Wide selection
- No special tool required
The Delta Classic 4 in. 2-Handle Mid-Arc Bathroom Faucet in Chrome sports an understated design that offers lasting durability and performance. Constructed of solid brass and featuring easy-to-use blade handles, this faucet combines style with function. The clean, simple look and chrome finish complement virtually any bathroom.
- 2-handle blade lever design for ease of use
- 1.2 GPM mid-arc spout is simple but tough
- Solid brass construction ensures quality and reliability
- Durable, self-lubricated seats for reliability and longer life
- WaterSense certified to promote water conservation
- WaterSense certified to help reduce water use
- ADA-compliant lever handle
- Includes metal pop-up drain assembly
- Lifetime limited guarantee covers parts and finish defects
Try our Add-A-Line Full-Slip Valve tee. This valve features a one piece forged brass compression and sweat tee body. It's 7/8 in. compression trunks provide easy and totally torchless installations.
- Adding water lines has never been easier
- Perfect for adding humidifiers, dishwashers, or ice makers
- Quality brass ball valve replaces cheap saddle valves that leak and clog
- Compression trunks are perfect for adding lines near HVAC or plastic drainage pipe that may get damaged by a soldering torch
- Very durable
- Torchless installations
This Commercial 4 in. 2-Handle High Arc Bathroom Sink Faucet in Chrome goes beyond providing exceptional commercial-grade performance with a product that reflects the personality of the individual institution. Delta believes there is a better way to live with water and has developed smart solutions that meet the unique requirements presented by each commercial environment. Providing individuals with a better way to experience water, while standing up to prolonged, rigorous use. And, all Delta commercial products are backed by the industry's best 5-year limited warranty.
- For use in non-residential applications
- CER-TEK ceramic valuing
- Pop-up drain assembly not included
- Heavy-duty cast brass sink faucet
- Metal hold-down package
- ADA-compliant sanitary-hoods color-indexed vandal-resistant lever handles included
- 5-year limited warranty for usage in industrial, commercial or business applications
The Rheem Professional Classic 38 Gal. Electric short water heater provides an ample supply of hot water for households with 2 to 4 people. This unit comes with two 4500-Watt elements and an automatic thermostat which keeps the water at the desired temperature. A 208-Volt electrical connection is required for installation. A premium grade anode rod provides long-lasting tank protection. Factory installed temperature and pressure relief valve and 3/4 in. water connections are included with the water heater for easy installation. This model has a 6-year limited tank and parts warranty. A 2.5 in. insulation blanket is included with this model for added efficiency.
- Electric water heater is easy to maintain
- Delivers 45 Gal. of hot water in the first hour
- 6-year limited warranty on tank and parts for your convenience
- Over-temperature protector cuts off power in excess temperature situations
- Short tank fits in tight applications
- 0.93 uniform energy factor signifies an energy efficient water heater
- Meets or exceeds NAECA requirements
- Dual 4500-Watt heating elements
- Automatic thermostat keeps water at your desired temperature
- Requires a 208-Volt connection for installation
- If heating elements of different wattages than those shown are demanded by zone requirements, they must be specifically requested
The NIBCO PVC DWV male adapter is used in residential and commercial drain, waste and vent systems. The PVC DWV male adapter features a hub x male NPT thread connection and provides a means for adapting a solvent weld connection to a threaded connection. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.
- PVC requires a primer before cementing
- For above-ground DWV
- Adapts PVC pipe to standard female pipe threads using solvent
- Smooth interior finish for reduced friction and material buildup
- Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
- Do not test or use with compressed air or other gases
- Maximum service temperature 140 degree F
The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value. This item is made in Taiwan.
- Fine surface
- Reliability
- Affordably priced
- Attractive styling
- Easy to install with little tools required
- Great value
The NIBCO lead-free brass ball valve with threaded end connections provides bubble-tight shutoff. The valve's PTFE seats and lead free ball exhibit high corrosion resistance properties. The valve is ideal for hot/cold water and gas applications. The NIBCO lead-free brass ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features threaded end connections for easy installation.
- Lead free
- Full port
- Blowout-proof stem
- IAPMO listed to NSF/ANSI-61-8, NSF/ANSI-372 and UPC-IGC-157
- CSA ANSI Z21.15 / CSA 9.1
- CSA ASME B16.44: 5 psig (maximum)
- CSA ASME B16.33: 125 psig (maximum)
- CSA CAN / CGA 3.16
- CSA CGA CR91-002: 1/2 psig, 2 psig and 5 psig
- FM 1140 approved 175 wwp
- UL 1477 (YQNZ): compressed gas shutoff valves 250 psi
- UL 842 (YRPV): gas shutoff valves 250 psi
- UL 842 (YRBX): flammable liquid shut off valves 250 psi
- UL 842 (MHKZ): manual valves 250 psi
- UL 125 (YSDT): LP-gas shutoff valves 250 psi
- UL subject 258 (VQGU): trim and drain valves
- Valve pressure rating 600 psi/41.4 bar non-shock cold working pressure
The 1/2 in. SharkBite Push-Fit x FNPT Adapter allows you to make a connection to 1/2 in. pipe using a push-fit connection and then gives you a 1/2 in. Female NPT Adapter on the opposite end. SharkBite fittings are the easiest way to join copper, cPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite Fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.
- Lead free DZR brass construction for durability and reliability
- Use to connect to any combination of copper, PEX, CPVC, or PE-RT pipes
- Innovative push-to-connect design makes for quick and easy installation
- Push-to-connect fittings require no solder, glue, unions, or tools
- Rated to 200 degree F and 200 psi
- Meets all UPC, IPC and cUPC requirements
Replacement Spindle For Bobrick
The plastic hood termination can be used to conceal PVC/CPVC piping to provide a clean, sleek finish to your venting system. The product itself is made out of PVC material. It is ideal for horizontal terminations.
- 3 in. PVC compatible
- 4 in. PVC compatible
- Not approved for Canada
- 1 year warranty
- 3 in. CPVC compatible
- 4 in. CPVC compatible
- Weather resistant
- For horizontal terminations
- Prevents heavy rain and snow entering water heater
- Prevents debris from entering water heater
The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.
- Durability
- No special tools needed
- Easy to install
- High quality
- Cost saving solution
- Attractive styling
The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value. This item is made in Taiwan.
- High quality
- Reliability
- Affordably priced
- Cost saving solution
- Wide selection
- Great value
ApolloPEX is cross-linked polyethylene tubing designed for use within potable water piping systems. ApolloPEX Pipe provides superior durability, corrosion resistance and flexibility for the most demanding environments. ApolloPEX is available in red, white and blue for the simple identification of cold water, hot water and main water lines. The ApolloPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.
- Superior flexibility reduces the number of fittings required for installation which also reduces leak points within piping systems
- Durable and corrosion resistant pipe endures most installation environments
- Suitable for wet or dry installations and immediate pressure testing
- Compatible with ApolloPEX system fittings and tectite by Apollo push-to-connect fittings
- Listed to NSF 14 and CSA B137.5 for use in potable water distribution piping systems
- Center-pull coil speeds installation
- Available in coils (25 ft. - 500 ft.) and sticks (2 ft. - 20 ft.) some sizes special order only
- Pressure & Temperature: 160 psi @ 73° F, 100 psi @ 180° F
- Designed, manufactured and tested to meet or exceed the requirements of ASTM F-876/877/2023 and CSA B137.5
- The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring, or behind wallboard or plaster
- Type B cross-linked polyethylene