An air conditioning disconnect (ACD) is a disconnect located between a loadcenter (distribution panel) and air conditioner. Eaton's ACD product line provides an installer or repair personnel with a visible disconnecting means when performing maintenance. ACDs are also known as disconnects, pullouts or air conditioning switches.The most widely used application for ACDs is for residential and light commercial air conditioning units. An ACD is installed outdoors, in visible proximity to the air conditioner condensing unit. Metallic enclosures are galvanized steel and are installed in various locations. Nonmetallic enclosures are a plastic (polycarbonate) enclosure commonly used in coastal or salt-water areas.

• ON/OFF control provided by a pullout handle
• Pullout handle can be conveniently stored in the compartment in the OFF position, helping to prevent the handle from being misplaced
• Protective shield cannot be removed until the pullout handle is removed, disconnecting the power
• Enclosure is rated NEMA 3R for outdoor use and material is galvanized steel

An air conditioning disconnect (ACD) is a disconnect located between a loadcenter (distribution panel) and air conditioner. Eaton’s ACD product line provides an installer or repair personnel with a visible disconnecting means when performing maintenance. ACDs are also known as disconnects, pullouts or air conditioning switches. The most widely used application for ACDs is for residential and light commercial air conditioning units. An ACD is installed outdoors, in visible proximity to the air conditioner condensing unit. Metallic enclosures are galvanized steel and are installed in various locations. Nonmetallic enclosures are a plastic (polycarbonate) enclosure commonly used in coastal or salt-water areas.

• ON/OFF control provided by a pullout handle
• Pullout handle can be conveniently stored in the compartment in the OFF position, helping to prevent the handle from being misplaced
• Protective shield cannot be removed until the pullout handle is removed, disconnecting the power
• Enclosure is rated NEMA 3R for outdoor use and material is galvanized steel

The Eaton Cutler-Hammer 60 Amp 120/240-Volt 14,400-Watt Fused Air Conditioning Disconnect is ANSI certified and CSA and UL listed. The unit has a metallic enclosure and is rated for outdoor use. The fused disconnect is compatible with class H fuses and is intended to disconnect power from an air-conditioning unit.

• Use to disconnect power from an air-conditioning unit
• NEMA 3R
• Single phase
• ON/OFF control provided by a pullout handle

An Air Conditioning (AC) Disconnect provides an installer or repair personnel with a visible disconnecting means while performing maintenance on an air conditioning unit. The Eaton 30 Amp 120/240-Volt AC Disconnect is ANSI certified and UL listed. The unit is approved for outdoor use and features a metallic enclosure. This safety switch is designed to disconnect power from an air-conditioning unit and is rated for up to 240-Volt.

• Type: fused pullout
• Amperage rating: 30 Amp
• Color: ANSI 61 gray
• Enclosure: NEMA 3R
• Enclosure material: galvanized steel
• Horsepower: 2 HP at 120-Volt, 3 HP at 240-Volt
• Interrupt rating: 10 kAIC
• Wire size: #14-3 AWG Cu/Al
• Fuses are sold separately

An air conditioning disconnect (ACD) is a disconnect located between a loadcenter (distribution panel) and air conditioner. Eaton's ACD product line provides an installer or repair personnel with a visible disconnecting means when performing maintenance. ACDs are also known as disconnects, pullouts or air conditioning switches.The most widely used application for ACDs is for residential and light commercial air conditioning units. An ACD is installed outdoors, in visible proximity to the air conditioner condensing unit. Metallic enclosures are galvanized steel and are installed in various locations. Nonmetallic enclosures are a plastic (polycarbonate) enclosure commonly used in coastal or salt-water areas.

• ON/OFF control provided by a pullout handle
• Pullout handle can be conveniently stored in the compartment in the OFF position, helping to prevent the handle from being misplaced
• Protective shield cannot be removed until the pullout handle is removed, disconnecting the power
• Enclosure is rated NEMA 3R for outdoor use and material is galvanized steel

Air conditioning disconnect is a pullout, non-fused, 2-Pole, 120/240-Volt. The enclosure is non-metallic/polycarbonate. This unit is most commonly used in coastal areas affected by rust due to moisture or salt spray.

• #2 to #14 Cu/Al wire range
• Back, bottom and side knockouts
• Interrupt rating: 10 kAIC
• Enclosure: NEMA 3R
• Amperage: 60

Air conditioning disconnect is a 30 Amp fused pull-out, 2-Pole, 120/240-Volt unit. The enclosure is non-metallic/polycarbonate. This unit is most commonly used in coastal areas affected by rust due to moisture or salt spray.

• Type: fused pullout
• Amperage rating: 30 Amp
• Color: black
• Enclosure: NEMA 3R
• Enclosure material: polycarbonate
• Horsepower: 1.5 HP at 120-Volt, 3 HP at 240-Volt
• Interrupt rating: 10 kAIC
• Voltage rating: 120/240-Volt
• Wire size: #14-2 AWG Cu/Al