Firex 5'' Smoke Alarm Hardwired W/ Aa battery Back-Up

• 2 AA Replaceable Batteries provides power even during short-term power outages for extra peace of mind. Change replaceable batteries every 6 months, or when you hear the low battery chirp.
• Enhanced sensing technology reduces false alarms often caused by cooking which results in fewer callbacks for contractors and builders.
• Self-testing components continuously check to ensure the device is active and operating as expected, assuring contractors and builders that the occupants have constant detection. (Disclaimer: Self-testing is not a substitute for a weekly manual push test of the alarm.)
• Simple and Fast Installation- With the included twist-and-click mounting bracket that's universal depending on power type.

Smoke Alarm 10-Year Battery Powered 1 Pack

• Worry-Free 10-Year Battery - No battery changes for 10 years. Avoids inconvenient battery replacements and saves up to $40 over the life of the device. (Disclaimer: 10-year limited warranty on alarm. Not a battery performance claim.)
• Enhanced Sensing Technology- Reduces false alarms often caused by cooking which results in fewer callbacks for contractors and builders.
• Self-Testing- Components continuously check to ensure the device is active and operating as expected, assuring contractors and builders that the occupants have constant detection. (Disclaimer: Self-testing is not a substitute for a weekly manual push test of the alarm.)
• Simple and Fast Installation- With the included twist-and-click mounting bracket that's universal depending on power type.

5" Smoke Alarm AA Battery Powered 1 Pack

• 2 AA Replaceable Batteries provides power even during short-term power outages for extra peace of mind. Change replaceable batteries every 6 months, or when you hear the low battery chirp.
• Enhanced sensing technology reduces false alarms often caused by cooking which results in fewer callbacks for contractors and builders.
• Self-testing components continuously check to ensure the device is active and operating as expected, assuring contractors and builders that the occupants have constant detection. (Disclaimer: Self-testing is not a substitute for a weekly manual push test of the alarm.)
• Simple and Fast Installation- With the included twist-and-click mounting bracket that's universal depending on power type.

The USI Electric 5304 Hardwired Ionization Smoke and Fire Alarm responds quickly to fast-flaming fires to protect your family against deadly threats in the home. Perfect for new or replacement installations, the 120-volt AC hardwired alarm is suitable for houses, apartments and mobile homes. Quick Find alarm origination identifies the first alarm to sound in an interconnected system and the single silence/test button temporarily quiets nonemergency alarms. The 9-volt alkaline battery (included) provides continuous protection in the event of a power outage. This alarm also features a quick activation pull-tab and a front-loading battery drawer for replacement without removing the alarm from the bracket. Mount the bracket to any standard wiring junction box and use the large mounting base to cover imperfections in drywall. The plastic dust cover protects the alarm from debris and (2) tamper-resistant locks prevent unwanted alarm or battery removal. For maximum protection, install an alarm inside every bedroom, outside every sleeping area and on all levels of the dwelling.

FEATURES:

• Fully interconnectable with all USI and Universal 120V alarms using existing wiring and mounting
• Features a quick activation pull-tab and a front-loading battery drawer for replacement without removing the alarm from the bracket
• Interconnectable up to 24 compatible devices
• Tamper resistant locking feature for battery and alarm
• 9V (backup) battery included
• Comes with a 3 year warranty on

• Chrome Plated
• Made from high-quality stainless steel for enhanced durability
• Allows you to conveniently keep your towels
• Chrome-plated finish offers resistance to corrosion
• Can be easily wall mounted for a hassle-free setup

This Kidde 120-Volt Hardwired Voice Warning Smoke Alarm with Wire-Free Interconnect and 10-year Lithium Battery Backup features voice alert, wireless interconnectivity, and a sealed-in 10-year Backup Battery. This alarm requires hardwire installation and includes a 10-year Battery Backup to provide protection even during power outages. The voice alarm announces "Fire" if a hazard is detected and indicates when the Smart Hush feature has been activated. This alarm interconnects with other Kidde hardwire interconnect alarms and also features wire-free interconnectivity with other Kidde 10-Year Wire-Free Interconnect alarms. If one unit is triggered, all interconnected alarms will sound. Wire-free interconnectivity allows for easy interconnect setup and eliminates the need for expensive rewiring. This alarm is also compatible with the Kidde Smart Bridge app and hub (sold separately), which will send a message to your smart phone, tablet or PC alerting you to a potential threat.

• Smoke alarm requires hardwire installation
• 10-year battery backup provides protection even during power outages
• Hardwire Interconnect can create a network of Alarms without additional wiring
• Alarm can interconnect with other Kidde 10-year Wi-Fi Interconnect units via radio frequency, providing an interconnected system without the inconvenience of rewiring your home
• Wi-Fi interconnectivity with the following Kidde models: P4010ACSCO-W, P4010ACS-W, P4010DCSCO-W, P4010DCS-W, P4010DCS-W, P4010LACS-W, P4010LDCS-W
• Voice alarm announces "Fire", when a smoke or fire hazard is detected
• End of life warning reminds you to replace your unit after 10 years to ensure the most reliable protection
• Photoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarms
• Compatible with the Kidde SmartBridge app and hub (sold separately), so that you can receive a message on your smart phone, tablet, or PC alerting you to a potential threat
• Remotelync SmartBridge app and hub are not required for device to operate
• Interconnect is not required; this alarm also functions as a stand-alone smoke detector
• A maximum of 24 Kidde devices can be interconnected in a multiple station arrangement; the interconnect system must not exceed the NFPA (National Fire Protection Association) limit of 18 initiation devices, of which 12 can be smoke alarms; with 18 initiating devices (smoke, heat, CO, etc. ) interconnected, it is still possible to interconnect 6 strobe lights and/or relay modules
• 10-year limited warranty
• Kidde offers a full range of 120-Volt AC wire-in life safety products with interconnect capability to provide the most immediate and complete system available. When any one interconnected alarm is triggered, all interconnected alarms within the home sound an immediate warning
• Check with your state and local fire and building/safety codes for specific information regarding smoke & carbon monoxide alarms
• Smoke detector utilizes a photoelectric sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• UL/CSFM reference model P4010ACS-W

i9050 is a full size, ionization, battery operated smoke alarm designed to protect you and your family from the dangers of smoke and fire. The i9050 is powered by a 9-Volt battery, providing continuous protection even during power outages. This unit includes a flashing red LED to indicate the alarm is receiving power. The i9050 is UL Listed and includes a 10-year limited warranty.

• Battery operated (9-Volt battery included) provides continuous protection even during power failures
• Test button verifies battery and alarm operation
• Low battery indicator chirps when battery needs replacement
• Easy installation no wiring required
• Smoke detector utilizes an ionization sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• UL/CSFM reference model i9050

i9040 smoke alarm is a battery operated smoke alarm that utilizes ionization sensing technology. The 4 in. unit is smaller in diameter giving it discreet design with the same quality you would expect in a Kidde manufactured product. The i9040 is powered by a 9-Volt battery, providing continuous protection, even during power outages. This easy to install unit includes a test button to verify the detection electronics are working as intended.

• Battery operated (9-Volt battery included) easy installation and provides continuous protection even during power outages
• Test button tests unit is electronic circuitry, horn and battery function
• Low battery indicator low battery warning chirp alerts user to change battery
• Discreet design 4 in. diameter
• Smoke detector utilizes an ionization sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• UL/CSFM reference model i9050

Combination Smoke/carbon Monoxide Alarm 10-Year Battery Powered 1 Pack

• Enhanced sensing technology reduces false alarms often caused by cooking which results in fewer callbacks for contractors and builders.
• Double the Detection- Alerts you to both smoke & carbon monoxide (CO) using a single, cost-effective device.
• Self-testing components continuously check to ensure the device is active and operating as expected, assuring contractors and builders that the occupants have constant detection. (Disclaimer: Self-testing is not a substitute for a weekly manual push test of the alarm.)

The Kidde PI2010 is a 120-Volt AC, wire-in smoke alarm with 9-Volt battery backup. This smoke alarm functions as a stand-alone unit or in an interconnected system. The Kidde PI2010 features Hush, allowing you to quickly silence nuisance alarms and also includes a tamper resist features that deters tampering and theft. The PI2010 includes a quick connect power harness that allows for quick and easy installation. This smoke alarm combines both photoelectric and ionization sensors. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms.

• Interconnect interconnects with up to 24 Kidde devices on one wiring network of which 18 can be initiating
• Ionization sensor may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms
• Photoelectric sensor may detect visible particles (associated with smoldering fires) sooner than ionization alarms
• Battery backup (9-Volt battery included) provides continuous protection even during power outages
• Tamper resistant deters from tampering or theft
• Hush feature temporarily silences nuisance alarms
• Check with your state and local fire and building/safety codes for specific information regarding smoke and carbon monoxide alarms
• Smoke detector utilizes ionization and photoelectric sensors to detect fire hazards and sounds an 85 db alarm when a hazard is detected

BRK has been the top choice of contractors in the commercial market for over 50-years. Marketed to builders, electrical contractors serving single family, multifamily, hotel/motel, RV and manufactured homes channels. The contractor-friendly product and packaging design sets the professional standard. Working smoke alarms cut the risk of dying in a home fire by 50% and that's important because a home structure fire was reported every 86-seconds. The faster you know about a fire, the faster you can start moving your family outside. The 7010B hardwire alarm works exceptionally well by using photoelectric sensor technology to detect smoldering fires that create a flameless form of combustion. Sources of these fires include cigarettes burning in couches or bedding. This alarm comes with 9-Volt battery backup and a single test and silence button. This BRK 7010B Hardwire Alarm is an essential product in protecting those who matter most.

• Photoelectric smoke sensing technology
• Latching alarm indicator
• Single button test/silence
• 9-Volt battery backup
• OptiPath 360 degree technology allows 360 degree access to the layer of air on the ceiling or wall that carries the fire signatures (smoke, combustion particles and volatile components)
• Locking feature for tamper resistance
• 85 dB alarm
• America's most trusted brand in home safety

Protect your family with the Kidde Firex Smoke Detector, Hardwired with Battery Backup, Smoke Alarm. The hardwired, ionization Kidde Firex Smoke Detector, Hardwired with Battery Backup, Smoke Alarm operates on a 120-Volt power source with a 9-volt alkaline battery backup. Using ionization sensor technology, the Kidde Firex Smoke Detector alerts to invisible fire particles, even during power outages. The Kidde Firex Smoke Detector, Hardwired with Battery Backup has green, constant LED light that indicates AC power is connected. Red LED blinking lights flash for standby, if the alarm senses combustion, fire, or smoke, alarm memory if the alarm is activated, and hush mode. UL Certified with a 10-year limited warranty. Meets requirements of UL217, NFPA72, The State of California Fire Marshall, NFPA 101, FHA, & HUD.

• UL/CSFM Ref. Kidde Part i4618AC
• Hardwired 120-volt power source with a 9-volt battery back-up
• Test/reset button - tests the smoke alarm circuitry & resets memory after an alarm has sounded
• No low battery chirps; internal timer alerts you to replace the entire unit after 10 years
• 85 decibel fire alarm alerts of fire
• Ionization sensor - detects invisible fire particles (associated with fast flaming fires) sooner than photoelectric sensing alarms
• Constant green LED light indicates that AC power is connected
• Red LED blinking lights indicate when: alarm is in standby mode, smoke or fire initiated the alarm, or is in hush mode
• Replacement Chirp - alerts to replace alarm after 10 years of operation
• Ensure whole home family protection by placing 1 fire detector and carbon monoxide detector on each level of your home, in your bedroom, & other locations where required by law
• Industry experts (such as the NFPA), recommend that both ionization and photoelectric smoke alarms be installed to help ensure maximum detection of the various types of fires that can occur within the home.
• Kidde offers a full range of 120-Volt AC wire-in life safety products with interconnect capability to provide the most immediate and complete system available, when any one interconnected alarm is triggered, all interconnected alarms within the home sound an immediate warning
• Smoke detector utilizes an ionization sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• Compatible with Kidde, FireX, code one and sentinel products
• *Check with your state and local fire and Building/Safety codes for specific information regarding smoke & Carbon Monoxide Alarms.

4" Smoke Alarm AA Battery Powered 1 Pack

• 2 AA Replaceable Batteries provides power even during short-term power outages for extra peace of mind. Change replaceable batteries every 6 months, or when you hear the low battery chirp.
• Enhanced sensing technology reduces false alarms often caused by cooking which results in fewer callbacks for contractors and builders.
• Self-testing components continuously check to ensure the device is active and operating as expected, assuring contractors and builders that the occupants have constant detection. (Disclaimer: Self-testing is not a substitute for a weekly manual push test of the alarm.)
• Enjoy simple and fast installation with the included twist-and-click mounting bracket that universally fits all 4" Kidde DETECT products.

Kidde P3010L is a 10-year, sealed lithium battery, smoke alarm with photoelectric sensing technology and Smart Hush feature. The innovative design allows for automatic activation once the unit is attached to the mounting bracket; there are no pull-tabs, no switches, everything is automatic. At the end of alarm life, the unit will chirp, indicating the alarm needs replacement.

• Sealed-in lithium power supply; no battery replacement required over the 10-year life of the alarm; eliminates worry about battery removal or unauthorized deactivation of alarm
• Advanced photoelectric sensor may detect visible particles (associated with smoldering fires) sooner than ionization alarms
• Self-activation alarm automatically activates when attached to the mounting bracket
• End of life warning alarm chirps every 30-seconds to indicate the unit needs replacement
• Smoke detector utilizes a photoelectric sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• UL/CSFM reference model P3010L

BRK has been the top choice of contractors in the commercial market for over 50 years. Marketed to builders, electrical contractors serving single family, multifamily, hotel/motel, RV and manufactured homes channels. The contractor-friendly product and packaging design sets the professional standard. Working smoke alarms cut the risk of dying in a home fire by 50%, and that's important because a home structure fire was reported every 86 seconds. The faster you know about a fire, the faster you can start moving your family outside. The 9120B hardwire alarm works exceptionally well by using ionization sensor technology to detect fast flaming fires that spread quickly. Sources of these fires include cooktop grease or wastebasket fires. Plus, this alarm allows easy alignment with the perfect mount feature and comes with battery backup. This BRK 9120B Hardwire Smoke Alarm is an essential product in protecting those who matter most.

• Smart technology - helps reduce the number of nuisance alarms
• Latching alarm indicator - remembers which unit initiated an alarm
• 9-Volt battery backup
• Single test/silence button

Gentex SC Series SCRR Multi-Criteria Smoke & Carbon Monoxide Alarm w/2 Relays. Multi-Criteria Combination Smoke And Carbon Monoxide Alarm W/2 Relays. ANSI/UL 217 9th Edition and ANSI/UL 2034 listed . 120VAC with 9V alkaline battery for backup . Two sets of Form A/C relay contacts . Mfg #918-0033-002

• Multi-Criteria Combination Smoke And Carbon Monoxide Alarm W/2 Relays
• ANSI/UL 217 9th Edition and ANSI/UL 2034 listed 
• 120VAC with 9V alkaline battery for backup 
• Two sets of Form A/C relay contacts

Gentex SC Series SCR Multi-Criteria Smoke and Carbon Monoxide Alarm w/Relay. Multi-Criteria Combination Smoke And Carbon Monoxide Alarm W/relay. ANSI/UL 217 9th Edition and ANSI/UL 2034 listed . 120VAC with 9V alkaline battery for backup . One set of Form A/C relay contacts . Mfg #918-0032-002

• Multi-Criteria Combination Smoke And Carbon Monoxide Alarm W/relay
• ANSI/UL 217 9th Edition and ANSI/UL 2034 listed 
• 120VAC with 9V alkaline battery for backup 
• One set of Form A/C relay contacts

The sealed-in lithium battery design of the Kidde Lithium Battery Ionization Smoke Alarm affords you 10-year of service from this important safety device. Protect your home or business against the incidence of smoke or fire when you install this wireless alarm. The alarm sounds a warning to notify you of the presence of invisible fire particles it detects via its ionization-sensing technology. The alarm becomes automatically operational the instant it comes in contact with the mounting bracket and installation takes just minutes, thanks to its wireless design.

• Utilizes ionization-sensing technology to recognize presence of smoke
• Sounds early warning upon detection of smoke
• Smart hush temporarily silences nuisance alarms and activates only when in alarm mode
• Push-button testing checks circuitry, horn and battery function
• Sealed-in lithium battery requires no replacement over 10-year life of alarm
• Provides protection during power outages
• Red LED bulb flashes rapidly to alert that alarm has sounded since the last time test/reset button was used
• Activates automatically when attached to mounting bracket
• Installs easily
• Appropriate for residential or commercial applications
• UL/CSFM Ref. i9010

The Universal Security Instruments MI3050SB-6P 2-in-1 Smoke and Fire Smart Alarm provides 10-years of continuous protection against deadly threats in the home. New patented Universal Smoke Sensing Technology provides the benefits of both photoelectric and ionization alarms in 1 device to protect against fast flaming and slow smoldering fires. Perfect for new or replacement installations, this maintenance-free alarm is suitable for houses, apartments and mobile homes. The sealed battery (included) will never have to be replaced throughout the life of the alarm, giving you a decade's worth in peace of mind even in the event of a power outage.

• Lithium-free alkaline permanent power from Duracell Duralock is safer and more eco friendly
• Superior resistance to false alarms, no batteries to change, no battery chirps
• Quick find alarm origination feature easily identifies originating alarm to sound in an interconnected system
• 10-year product end of service life warning - sounds when it is time to replace detector
• 10-year limited warranty
• This Alarm conforms to UL 217 standards, California State Fire Marshal approved nd Federal Housing Authority (FHA) approved to exceed industry standards

First Alert is the category leader in fire safety and delivers reliable life safety products that help our consumers protect what matters most through innovation and performance. Working smoke alarms cut the risk of dying in a home fire by 50% and that's important because a home structure fire was reported every 86-seconds. The faster you know about a fire, the faster you can start moving your family outside. The FG250B battery powered alarm works exceptionally well by using ionization sensor technology to detect fast flaming fires that spread quickly, such as a grease or wastebasket fires. Plus, this alarm emits an 85 dB horn and Red LED light when smoke is detected. The First Alert, Family Gard FG250B Smoke Alarm is an essential product in protecting your home and family.

• Hinged cover for easy battery replacement
• Lighted power and alarm indicator
• Silence feature
• 9-Volt battery operated

The Gentex 7139CS-W is a photoelectric smoke alarm designed for residential and commercial residential applications, including homes, apartments, hospitals, hotels/motels. The 7139CS-W is designed to give reliable early warning of the presence of smoke where both audible and visual alarms are required. The 7139CS-W is ANSI/UL 217 and ANSI/UL 1971 listed and is compliant with IBC/IFC Standards as well as NFPA 72.

• 120 VAC with 9VDC battery back-up
• 90dBA temporal 3 evacuation piezo horn with a 3100Hz (nominal) horn frequency
• ADA compliant 177 candela strobes (ANSI/UL 1971)
• Wall mount
• On-site washing program
• Nominal 2.5% sensitivity
• 3-position test switch
• Form C contact included
• Tandem interconnect with all Gentex tandem capable alarms
• Low or missing battery indicator
• Relays operate on battery back-up and will activate from tandem wire
• Quick disconnect wiring harness
• Fully insect screened
• 1-year warranty from date of purchase

The USI Electric Hardwired Smoke and Fire Alarm uses patented Universal Smoke Sensing Technology to respond quickest to BOTH fast-flaming fires and slow smoldering fires to protect your family against deadly threats in the home. U.S.S.T. provides the benefits of both photoelectric and ionization alarms in 1 device. Perfect for new or replacement installations, the 120-Volt AC hardwired alarm is suitable for houses, apartments and mobile homes. This alarm is fully interconnectable with all USI and Universal 120-Volt alarms using existing wiring and mounting. Quick Find alarm origination identifies the first alarm to sound in an interconnected system and the single silence/test button temporarily quiets nonemergency alarms. Auto sensitivity calibration also provides superior nuisance alarm protection and creates consistency in alarm sensitivity. This alarm has additional automatic features including a self-diagnostics check and a sensitivity adjustment for changes in temperature or humidity. The USI Electric MI106S Hardwired 2-in-1 Universal Smoke Sensing Technology Smoke and Fire Smart Alarm comes with a 10-year Permanent Power tamper-proof sealed battery continues protection in the event of a power outage.

• 2-in-1 universal smoke sensing technology USST responds quickly to both fast-flaming and slow smoldering fires to protect your family against deadly threats in the home
• 120-Volt AC hardwired alarm with 10-year permanent power sealed backup battery is suitable for houses, apartments and mobile homes
• Mount the bracket to any standard wiring junction box and use the large mounting base to cover imperfections in drywall
• Fully interconnectable with all USI and universal 120-Volt battery drawer alarms using existing wiring and mounting
• 10-year limited warranty on both battery and alarm

The Gentex S1209F photoelectric smoke alarm is for use as an evacuation device in all dwelling units, including but not limited to homes, apartments, hospitals and hotels/motels. The S1209F is engineered to eliminate nuisance alarms and deliver outstanding performance wherever reliable smoke detection is required. The S1209F is listed in compliance with ANSI/UL 217.

• 120 VAC with 9VDC battery back-up
• Temporal 3 evacuation piezo horn with a 3100Hz (nominal) horn frequency
• Form A/form C relay contacts
• Relay contacts operate when on battery back-up
• Push button self-test feature
• DUALINK feature: tandem with all Gentex tandem capable alarms
• Quick disconnect wiring harness
• Dust cover to prevent particle contamination during installation
• Low or missing battery indicator
• 1-year warranty from date of purchase

Kidde Ionization Smoke Detector with Battery Backup is an ionization-sensing alarm that offers 120 VAC of power with a 9-Volt battery backup for continuous protection during power outages. This alarm can operate as a single unit or as a component of an inter-connected system in your home or business. This important safety device has a push-button test capability to check its circuitry, horn and battery and can be put into a hush mode that will silence nuisance alarms. This unit has a tamper-resistant locking feature to help prevent unauthorized entry or theft.

• Utilizes ionization-sensing technology to detect smoke
• Sounds warning upon the incidence of smoke
• Hardwired smoke detector
• Rear battery installs back up
• Functions as a single unit or in an interconnected system
• Hush feature temporarily silences nuisance alarms
• Test button checks unit's electronic circuitry, horn and battery function
• 9-Volt battery provides protection during power outages
• Tamper-resistant locking pin helps deter alarm tampering and theft
• Alarm cap twists on and off for easy battery replacement
• Appropriate for residential or commercial applications
• Compatible with Kidde, FireX, Code One and Sentinel products
• *Check with your state and local fire and Building/Safety codes for specific information regarding smoke & Carbon Monoxide Alarms.
• Smoke detector utilizes an ionization sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• Kidde offers a full range of 120-Volt AC wire-in life safety products with interconnect capability to provide the most immediate and complete system available; when any one interconnected alarm is triggered, all interconnected alarms within the home sound an immediate warning
• UL/CSFM Ref. Kidde Part I12040