Milwaukee AC Digital Clamp Meter, 400 Amp Built-In Led Light Allows You To Work In Darker Areas Can determine a voltage range up to 600-volt AC/DC Includes an easy-to-read white on black display Measures up to 400 amps AC, Large 1.0” jaw opening Rugged over-molding increases durability and user grip Thin Jaw Profile for easier wire measurement in panels or in bundles True-RMS for accurate measurement in all applications Wide Voltage range to 600 AC/DC volts (1) 400 Amp Clamp Meter; (2) AAA Batteries Mfg #2235-20

• Built-In Led Light Allows You To Work In Darker Areas
• Can determine a voltage range up to 600-volt AC/DC
• Includes an easy-to-read white on black display
• Measures up to 400 amps AC, Large 1.0” jaw opening

The NCVT-3P is a non-contact voltage tester with an integrated flashlight. The voltage sensor detects 12 to 1000V AC and indicates the presence of voltage in cables, cords, circuit breakers, light fixtures, switches, outlets and wires as well as AC voltage in doorbells, thermostats, low voltage lighting and irrigation systems. Includes both visual and audible signals. The NCVT-3P is rugged enough for any job site.

• Non contact voltage tester's dual-range capabilities allow tester to detect from 12 to 1000 V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications
• Detects voltage with simultaneous visual and audible voltage indicators
• Bright flashlight illuminates work area and may be used independent of voltage detection function
• Green light indicates no voltage
• Lightweight, compact tool with pocket clip provides convenient storage and quick access
• Auto power-off feature conserves and extends battery life
• CAT IV 1000V rating provides expanded operation and protection
• Screw-thread battery cap with O-ring ensures protection against dust and water ingress
• 6.6 ft. (2 m) drop protection
• IP67: Dustproof and waterproof
• Conforms to CE requirements
• US Patent 10,073,142, D750,985 and other patents pending

Milwaukee AC/DC Digital Clamp Meter, 600 Amp Built-In Voltage Detector And Led Work Light CAT III 600V for increased safety Frequency Measurement High Contrast, White on Black Display with Backlight for easy reading Measures up to 600 amps AC/DC, Large 1.30” jaw opening Inline Design for Easy Maneuvering Thin Jaw Profile for easier wire measurement in panels or in bundles True-RMS for accurate measurement in all applications Wide Voltage range to 600 AC/DC volts 5-Year Warranty (1) True RMS Clamp Meter; (1) Test Lead Set; (2) AA Batteries Mfg #2237-20

• Built-In Voltage Detector And Led Work Light
• CAT III 600V for increased safety
• Frequency Measurement
• High Contrast, White on Black Display with Backlight for easy reading

Klein Tools CL120 Clamp Meter is an automatically ranging digital clamp-meter that measures AC current and NCVT via the clamp, and AC/DC voltage, resistance and continuity via test-leads. Klein Tools' Test and Measurement product line was exclusively designed from the ground up by electricians for electricians. Years of field research, combined with extensive input from electricians across America, inspired the development of meters and electrical testers loaded with time-saving features.

• Clamp Meter measures AC current and NCVT via clamp and AC/DC voltage, resistance and continuity via test-leads
• Non-contact voltage tester integrated into the clamp jaw
• Backlit LCD for ease of viewing in low light
• Auto ranging measurements
• Test lead holder on side of clamp and optional magnetic hanger for meter (Cat. Nos. 69445 or 69417) for hands-free operation
• Durable, multifunction meter
• Auto-Range, Hold, Data Hold, and Max value
• Auto-power off after 10 minutes to conserve battery life
• Includes a carrying case, test leads with CAT III/CAT IV safety caps, Instructions, and 3 x AAA batteries
• Low battery indicator and easily accessible battery compartment
• Built to withstand a 6.6 ft. (2 m) drop
• CAT III 600V, Class 2, Double insulation safety rating
• Meets requirements for use in basic and controlled electromagnetic environments like residential, office and light-industrial locations

Klein Orange Digital AC/DC Voltage/Continuity Tester. Automatically Selects Voltage Or Continuity; Automatically Powers On When Any Measurement Is Attempted. Backlit Lcd Display. Cat Iv 600v Modern Solid-State Design For Safety. Tests Gfci Protected Circuits. Uses Standard Replaceable Multimeter Test Leads. Features Built-In Test Lead Holders On Back Of Meter. Integrated Flashlight. 9.8 Ft. (3 M) Drop Protection. Ip53 Dust And Water Resistant. Mfg #ET250

• Automatically Selects Voltage Or Continuity; Automatically Powers On When Any Measurement Is Attempted
• Backlit Lcd Display
• Cat Iv 600v Modern Solid-State Design For Safety
• Tests Gfci Protected Circuits

Klein Tools CL800 Electrical Tester is an automatically ranging true root mean squared (TRMS) digital clamp meter that measures AC/DC voltage, resistance, continuity, frequency, capacitance, and tests diodes via test-leads, and temperature via a thermocouple probe. It also features a Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages. Klein Tools' Test and Measurement product line was exclusively designed from the ground up by electricians for electricians. Years of field research, combined with extensive input from electricians across America, inspired the development of meters and electrical testers loaded with innovative, time-saving features.

• Clamp Meter with automatically ranging true mean squared (TRMS) technology for increased accuracy
• Test leads measure AC/DC voltage, resistance, continuity, frequency and capacitance and tests diodes
• Thermocouple probe measures temperature
• Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages
• CAT IV 600V, CAT III 1000V, Class 2, Double insulation safety rating
• Built to withstand a 6.6 ft. (2m) drop
• Low battery indicator and easily accessible battery compartment
• Operating temp: 32-degree F to 104-degree F (0-degree C to 40-degree C)
• Operating altitude to 6562 ft. (2000m)
• Includes carrying pouch, test leads, thermocouple with adapter and batteries
• Meets requirements for use in basic and controlled electromagnetic environments like residential, office and light-industrial locations

Klein Tools NCVT-4IR is a voltage tester. It provides non-contact determination of AC voltage in cables, cords, circuit breakers, switches, outlets and wires. It also features an infrared (IR) thermometer, making it the perfect choice for HVAC professionals.

• Voltage Tester designed specifically for HVAC applications
• Non-Contact Voltage Tester provides non-contact determination of AC voltage in cables, cords, circuit breakers, switches, outlets and wires, and AC voltage in security, entertainment, communications, environmental control, and irrigation systems
• Detects AC voltage from 12 to 1000V with visual and audible indicators
• 4:1 distance-to-spot ratio IR thermometer with user selectable Degrees Fahrenheit or Degrees Celsius from -22 to 482-Degree Fahrenheit (-30 to 250-Degree Celsius)
• Convenient laser pointer to target measurement area for temperature measurement
• Backlit LCD display with 0.1-Degree resolution
• Auto power-off conserves and extends battery life
• Screw-thread battery cap with O-ring ensures dust and water resistance
• Lightweight, compact tool with pocket clip provides easy storage and quick access

The CL220 measures AC current and NCVT via clamp and AC/DC voltage, resistance, and continuity via test-leads, and temperature with thermocouple. The meter features automatically ranging True Root Mean Squared (TRMS) measurement technology for accuracy. Additionally, a backlit LCD makes viewing in low light easy.

• Clamp Meter measures AC current and NCVT via clamp and AC/DC voltage, resistance, and continuity via test-leads, and temperature with thermocouple
• Non-contact voltage tester integrated into the clamp jaw
• Backlit LCD for ease of viewing in low light
• Automatically ranging True Root Mean Squared (TRMS) measurement technology for accuracy
• Test lead holder on side of clamp and optional magnetic hanger for meter (Cat. Nos. 69445 or 69417) for hands free operation
• Measures temperature with a K-Type thermocouple probe
• Auto-Range, Hold, Data Hold, and Max value
• Auto-power off after 10 minutes to conserve battery life
• Includes a carrying case, test leads with CAT III/CAT IV safety caps, thermocouple, instructions, and 3 x AAA batteries
• Low battery indicator and easily accessible battery compartment
• Built to withstand a 6.6 ft. (2 m) drop
• CAT III 600V, Class 2, Double insulation safety rating
• Meets requirements for use in basic and controlled electromagnetic environments like residential, office and light-industrial locations

Klein Tools ET40 is an Electronic AC/DC Voltage Tester. It features indicators for positive and negative DC polarity, and tests DC voltages as low as 1.5V. It tests AC voltages 12-240VAC. Excellent for checking, verifying or troubleshooting common residential electrical wiring in electrical outlets, light fixtures, doorbells and more. It operates on 2 x AAA batteries.

• Voltage Tester for AC voltages from 12V to 240V AC at four useful levels aligned with commonly used residential voltages
• Tests DC voltages from 1.5V to greater than 17 to 24V at four useful levels aligned with commonly used DC voltages
• Bright LEDs illuminate to indicate the type and level of voltage detected
• Built to withstand a 9.8-Foot (3 m) drop
• Indicates polarity when measuring DC voltages
• Powers off automatically after approximately 2 minutes of non-use to conserve battery life
• CATIII 250V, Class 2, Double insulation
• Ingress protection IP41 dust and water resistant
• Built-in test lead holders on sides of tester
• Low battery indicator with easily accessible battery compartment
• Pocket clip secures tester to pocket for reliable everyday carrying
• Uses 2 x AAA batteries (included)

Klein Tools CL320 Clamp Meter is an automatically ranging true root mean square (TRMS) digital clamp meter. It measures AC current and NCVT via the clamp, AC/DC voltage, DC microamps, resistance, continuity, frequency, capacitance, and tests diodes via test-leads, and temperature via a thermocouple probe. Features include Auto Range to improve efficiency and speed when making measurements; Diode Test to troubleshoot malfunctioning diodes; Max/Min to understand the variability from average of an electrical property being measured, and DC Microamps measurements when working with flame sensors.

• Clamp Meter measures AC current and NCVT via clamp and AC/DC voltage, resistance, frequency, DC microamps, capacitance, duty cycle, diode test, and continuity via test-leads, and temperature with thermocouple
• Non-contact voltage tester integrated into the clamp jaw
• Backlit LCD for ease of viewing in low light
• Automatically ranging True Root Mean Squared (TRMS) measurement technology for accuracy
• Test lead holder on side of clamp and optional magnetic hanger for meter (Cat. Nos. 69445 or 69417) for hands free operation
• Measures temperature with a K-Type thermocouple probe
• Auto-Range, Data Hold, and Max/Min value
• Auto-power off after 10 minutes to conserve battery life
• Includes a carrying case, test leads with CAT III/CAT IV safety caps, thermocouple, instructions, and 3 x AAA batteries
• Low battery indicator and easily accessible battery compartment
• Built to withstand a 6.6 ft. (2 m) drop
• CAT III 600V, Class 2, Double insulation safety rating
• Meets requirements for use in basic and controlled electromagnetic environments like residential, office and light-industrial locations

The CL900 Electrical Tester is an auto-ranging, true root mean square (TRMS) digital clamp meter. It measures AC/DC current via the clamp and measures AC/DC voltage, resistance, continuity, frequency, duty-cycle, capacitance, and tests diodes via test-leads. It features a Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages, and has a dedicated mode for capturing Inrush Current.

• Digital Clamp Meter measures 2000A AC/DC, 1000V AC/DC, 60 Milliohm
• Rugged Klein TOUGH METER industrial design stands up to jobsite demands; built to withstand a 6.6 ft. (2m) drop
• Automatically ranging True Root Mean Squared (TRMS) measurement technology for accuracy
• CAT IV 600V, CAT III 1000V, Class 2, double insulation safety rating
• Backlit display for clear visibility in environments with low ambient lighting
• Dedicated mode for capturing Inrush Current
• Non-contact voltage tester integrated into the clamp
• Low impedance (LoZ) mode for identifying and eliminating ghost or stray voltages
• Audible continuity, capacitance, diode test, frequency and duty cycle, min/max feature, data hold capability
• Test leads measure AC/DC voltage, resistance, continuity, frequency, duty-cycle, capacitance and diodes
• Clamp measures AC and DC current
• Powers off automatically after 30 minutes of non-use to conserve battery life
• Low battery indicator and easily accessible battery compartment
• Includes carrying case (instruction manual), straight input test leads, and 2 x AAA batteries
• Can be used with Magnetic Hanger Cat. No. 69417 (sold separately)

The CL360 Electrical Tester is an automatically ranging true root mean squared (TRMS) digital open jaw fork meter that measures AC current via the fork, AC/DC voltage, continuity, and resistance via test leads. It can detect the presence of voltage via the integrated non-contact voltage (NCV) tester. It includes a carrying case, test leads and 2 x AAA batteries.

• Open Fork Meter with automatically ranging True Root Mean Squared (TRMS) measurement technology for accuracy
• Tester measures AC current via the clamp, and AC/DC voltage, resistance, and continuity via test leads
• Wide jaw for measuring current in cables up to 3/0 sizes; accommodates cables of diameter up to 0.58-Inch (1.5 cm)
• Non-contact voltage tester integrated into the jaw
• Includes a carrying case, test leads and 2 x AAA batteries
• Jaw and Housing: CATIV 600V/CATIII 1000V; Electrical: CATIII 600V/CATII 1000V; Class 2, Double Insulation
• Backlit display for clear readings
• Powers off automatically after 15 minutes of non-use to conserve battery life
• Rugged Klein "TOUGH METER" is built to withstand a 9.9-Foot (3m) drop
• Low battery indicator and easily accessible battery compartment
• Meets requirements for use in basic and controlled electromagnetic environments like residential, office and light-industrial locations

Klein Tools CL700 Electrical Tester is an automatically ranging true root mean squared (TRMS) digital clamp meter that measures AC current via the clamp, and measures AC/DC voltage, resistance, continuity, frequency, capacitance, and tests diodes via test-leads, and temperature via a thermocouple probe. It also features a Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages. Klein Tools' Test and Measurement product line was exclusively designed from the ground up by electricians for electricians. Years of field research, combined with extensive input from electricians across America, inspired the development of meters loaded with innovative, time-saving features.

• Clamp Meter with automatically ranging true mean squared (TRMS) technology for increased accuracy
• Electronic Tester's clamp measures AC current and its thermocouple probe measures temperature
• Test leads measure AC/DC voltage, resistance, continuity, frequency and capacitance and tests diodes
• Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages
• CAT IV 600V, CAT III 1000V, Class 2, Double insulation safety rating
• Built to withstand a 6.6-Foot (2 m) drop
• Low battery indicator and easily accessible battery compartment
• Includes a carrying pouch, test leads, thermocouple with adapter and batteries
• Meets requirements for use in basic and controlled electromagnetic environments like residential, office and light-industrial locations
• Operating Temperature: 32-degrees F to 104-degrees F (0-degrees C to 40-degrees C)
• Operating altitude to 6562-Foot (2000 m)

ET60 is a solid-state, low impedance, electronic voltage tester. It measures AC/DC voltages up to 600V. The ET60 does NOT require batteries; it is powered by the applied voltage. It is excellent choice for testing voltage in electrical circuits, at outlets, in light fixtures or anywhere else where AC/DC voltage testing is required.

• Voltage Tester for AC/DC voltage from 12-600V at nine useful levels aligned with commonly used voltages
• Uses standard replaceable multimeter test leads for versatility
• CAT IV 600V modern solid-state design for safety
• Easy to use bright LED display clearly reports the voltage present in the circuit being tested
• Integrated test-lead holders are used for lead storage or for holding the probes correctly spaced for insertion into tamper-resistant US-style outlets
• Inherent low input impedance reduces the possibility of falsely reading ghost or stray voltages on non-energized circuits
• Batteries not required, as tester is powered by the applied voltage in the circuit being tested