Searched for "40101700"
Supply your technicians with only the best components to get the job done the right way the first time. These contactors are manufactured from the highest quality materials. Backed by designs that are tried and tested to perform.
- Accordance with U.L. bulletin no. 508 Industrial control equipment, contactors meet specifications for devices up to 600 VAC
- Coils have class B insulation
- Includes lug, spade terminals, and covers
- Single pole include shunt
The Emerson 90-244 2 pole is a definite purpose contactor for air conditioning and heating equipment. This contactor features low VA coil for cooler operation. The universal mounting bracket fits existing mounting holes. 24 VAC. 30 Amp.
- Low voltage coil for increased life
- Quiet operation
- Universal mounting bracket fits most applications
- Double break contacts ensure positive make and break
- 24-Volt AC
- Resistance DC OHMS 11
- Current MA 150
- Nominal VA 6
- Maximum inrush VA 32
- Time delay relay. 24 volt coil
- On: 1-25 seconds. Off: 65-115 seconds
- Replacement for Goodman B13707-38
- UL® and CSA® approved
- 24 volt control circuit
- Five second delay between all subsequent stages, unless they function together
- Used on gas and electric units
Enclosed fan relay type 184, 24-Volt coil, SPNO-SPNC. Used for switching Solenoids, fan motors and general purpose switching. UL file number E12139 CSA file number LR13360.
- Coil-voltage 24-Volt
- Normally opened / closed type
- 1/4 in. spade connections 5 pin
- Coils frequency 50 Hz/60 Hz
The Emerson two pole double throw semi-enclosed relay for use in vending machines, appliances, heating and air conditioning applications, and general-purpose switching. This is a switching relay is a 2 Pole relay with 24 VAC coil. This Type 91 relay features DPDT switching and two sets of power rated contacts.
- Easy install
- -40 degree F to 130 degree F temperature range
- Coil voltage 24 Hz
- Coil DC resistance 17.5
- Coil MA 334
- Coil nominal VA 9.5
- Coil inrush VA 22
This definite purpose contactor meets UL508 specifications for devices up to 600 Vac. The coils have class B insulation. It includes lugs, spade terminals and covers.
- 180/150/120 locked rotor Amps
- 30 inductive Amps
- 40 resistive Amps
- Auxiliary switches sold separately
This is a genuine Goodman replacement part. Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details. Professional installation recommended.
- SEQUENCER B12565-52
- HVAC application
- Dimensions: 4 in. x 23.75 in. x 30.75 in.
- Quality build
The Emerson 24A34 series electric heat sequencer is a direct replAcement for most fan and heat sequencing functions. This electric heat sequencer features 2 switches and multi-poise mounting. 24 volt input control.
- Terminal markings are equivalent to other types
- 24-Volt input control
- Multi-poise mounting
- Double quick-connect terminals for combination loads
- 1 switch
- On timings 30 - 90 seconds
- Off timings 1 - 30 seconds
E Lite is a plastic pad designed as a mounting base for condenser equipment. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but durable. A subtle texture prevents unit slide and presents a classic appearance which is enhanced by rounded edges.
- Generous individually engineered ribbing for optimum self-leveling ground support
- Each pad is molded with its size in raised letters for easy identification
- Rugged design provides uniform and generous ribbing for optimum self-leveling ground support without inserts
- E Lite is drillable for securing unit
- Does not crack, flake, or warp when tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution (of 20% by volume)
- Flawless performance under the 25-cycle regime specified by ASTM C67
- DiversiTechs most popular pad due to its rugged durability, strength, and clean looks
Century Multi-horsepower Condenser Fan Motor
- 1/3 - 1/6 HP
- 208 - 230 Volts
- 1075 RPM
- 2.6 - 1.8 Amps
- Ball Bearings
- 5-5/8" Diameter
- 70 degree C Ambient
- 48" Color Coded Lead
- 1/2" x 6.5" Shaft Length
- 4.74" Shell Dimensions
- Class "F" Insulation
- 60 HzOperation
These definite purpose contactors meet UL508 specifications for devices up to 600 Vac.All single pole include shunt. It also inludes lugs, spade terminals and covers.The coils have class B insulation.
- Definite purpose contactors
- 30 inductive Amps
- 40 resistive Amps
- Auxiliary switches sold separately
24-Volt Heat Sequencer, fan and electric, 2 Switches. On Timings, 30-90 seconds. Off timings 1-30 seconds. Replaces Honeywell, MARS, TOD, GEMLINE, Klixon (Texas Instruments). UL component recognized.
- Direct replacement for most fan / heat sequencing functions
- 2 switches
- On timings: 30-90 seconds
- Off timings: 1-30 seconds
- 24-Volt input control
- Multi-poise mounting
- Any contacts (except M1 and M2) can be used as auxiliary contacts
- Double quick-connect terminals for combination loads
Fasco Condenser Fan Motor
- 1/4 HP
- 208 / 230 Volts
- 1075 RPM
- 1-Speed
- 1.8 Amps
- Totally Enclosed
- Reversible Rotation
- POC5 Capacitor
- Sleeve Bearings
- 5.6" Diameter
- 1.2 Load Factor
- Stud/Belly Band/Tapped Holes Mounting
- 1.00 Service Factor
- 6-1/2" Shaft Length
- Permanent Split Capacitor Motor Type
- 48 Frame
- Automatic Overload
- 1 Phase
- 1/2" Shaft Diameter
- 1 Shaft
- 60 Hertz
- 1/2" x 6-1/2" Shaft Dimension
- 4" Length Less Shaft
This is a genuine GOODMAN replacement part. It is designed for use in HVAC applications. See installation guide for more details. Professional installation recommended.
- Voltage: 208/230
- Compatibility: GOODMAN equipment
- Horse power: 1/6
- Motor, service
Enclosed fan relay type 84, 24-Volt coil, SPNO. Used for switching Solenoids, fan motors and general purpose switching. UL file number E12139 CSA file number LR13360.
- Coil-voltage 24-Volt
- Switch action single pole, normally open
- Coils frequency 50 Hz/60 Hz
- Spade connections
This is a genuine Goodman replacement part. Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details. Professional installation recommended.
- Sequencer B12565-51
- HVAC application
- Dimensions: 0.99 in. x 0.99 in. x 0.99 in.
- Quality build
Century Open Lead End Outdoor Drip Proof Condenser Motor
- 1/4 HP
- 208 - 230 Volts
- 1075 RPM
- 1.5 Rated Amps
- 1.9 Max Amps
- 1-Speed
- Sleeve Bearings
- 60 degree C Ambient
- Class "B" Insulation
- Reversing Plug
- Resilient Rings Included for Refrigeration Applications
- 1-5/8" Extended Thru Bolts
- Vertical Shaft Up / Horizontal
- 48 Frame
- 5-5/8" diameter motor
- 60 Hz
- 26" Color Coded Leads
- 1/2" Diameter Flatted Shaft
- Auto Protector
- Applications: Outdoor air conditioning unit, Heat pumps and refrigeration condensation
- Permanent split capacitor motor
- Reversible rotation
- Automatic thermal overload
- All Angle Mount
Fasco Condenser Fan Motor
- 1/8 HP
- 208 / 230 Volts
- 1025 RPM
- 1-Speed
- 0.9 Amps
- Totally Enclosed
- Counter Clockwise Rotation
- Sleeve Bearings
- 5.6" Diameter
- 1/2" x 3-1/2" Shaft Dimension
- 3-3/4" Length Less Shaft
- Totally Enclosed
- Counter Clockwise Rotation
- Sleeve Bearings
- 1-Speed
The Emerson 24A34-3 Electric Heat Sequencer is a direct replacement for most fan/heat sequencing functions. This sequencer features 2 switches and multi-poise mounting. This sequencer features 2 switches and multi-poise mounting.
- Direct replacement for most fan / heat sequencing functions
- 2 switches
- On timings: 1-20 sec
- Off timings: 40-110 sec
- 24-Volt input control
EcoPad is a polypropylene plastic mounting pad designed to support HVAC outdoor units and other outdoor equipment. These pads are a great environmentally friendly alternative to concrete equipment pads, thanks to the recycled content and low raw material usage when formed. The rugged design and optimized rib-pattern provide excellent support on soil and gravel terrain. Available in both 2 in. and 3 in., depending on local building code requirements.
- Lower cost version of E-Lite pad
- Lightweight, durable, and exceptionally strong
- Textured top surface to reduce slippage
- Unaffected by UV exposure or extreme weather
- Drillable for securing unit (1/4 in. x 1-1/4 in. tapcon recommended)
A very durable contacted that is capable of carrying more amperage. Manufactured with quality material that ensures a good direct contact so the device can function properly. This contactor works with 99% of residential AC units.
- 40 inductive Amps
- 50 resistive Amps
- 240/200/160 locked rotor Amps
- Auxiliary switches sold separately
Century Condenser Fan Motor
- 1/8 - 1/10 - 1/12 HP
- 208 - 230 Volts
- 1075 RPM
- 1-Speed
- .9 Amps
- Water-resistant reversing plug
- Double sealed ball bearings
- 36" leads
- 60 Hz
- 60 degree C ambient
- Continuous duty, air over
- Class B Insulation
- UL and CSA recognized
- Replaces motors with a 4.33, 4.42 and 4.62 inch mounting bolt circle (BC).
E Lite is a plastic pad designed as a mounting base for condenser equipment. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but durable. A subtle texture prevents unit slide and presents a classic appearance which is enhanced by rounded edges.
- Generous individually engineered ribbing for optimum self-leveling ground support
- Each pad is molded with its size in raised letters for easy identification
- Rugged design provides uniform and generous ribbing for optimum self-leveling ground support without inserts
- E Lite is drillable for securing unit
- Does not crack, flake or warp when tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution (of 20% by volume)
- Flawless performance under the 25-cycle regime specified by ASTM C67
- DiversiTechs most popular pad due to its rugged durability, strength and clean looks
The Emerson 90-118E fan control center combination transformer and relay combination, SPNO/SPNC, 120 V primary. This fan control center can be installed on on a 4 in. x in. junction box. The pre-wired line voltage connections and color-coded and pre-striped leads provide easy installation. Energy limiting class II transformer design and low voltage connections on terminal board.
- 24 VAC secondary
- Line voltage connections pre-wired
- Color coded pre-stripped leads for easy install
- Low voltage connections on terminal board
- Easy installation on a 4 in. x 4 in. junction box