The VCMA-15ULS has 1/2 Gal. tank capacity. Little Giant VCMA Series is ideal for collecting, detecting and the automatic removal of condensate from air conditioning equipment, de-humidifiers, high efficiency furnaces, condensing boilers and other equipment where an automatic drain pump is required. Also suitable for high efficiency oil and gas-fired condensing furnace and condensing boiler equipment.

• 1/50 HP high performance motor
• ABS tank, motor cover and volute
• Stainless steel pump shaft
• Snap-action pump switch
• Removable 3/8 in. barbed check valve
• Safety switch included

Avoid excess condensation from your HVAC equipment with Little Giant's VCMA-20ULS condensate pump. Used to move and direct the flow of condensation produced by boilers, furnaces, air conditioning systems and hydroponic systems, the VCMA-20 condensate pump is ideal when gravity drainage is not possible or practical. Its state-of-the-art design features a vertical-type pump unit to fit in tight spaces requiring a smaller footprint.

• 1/30 hp high-performance motor
• ABS tank, motor cover and volute
• Stainless steel motor shaft
• 1/2 Gal. tank capacity
• Safety switch included

The VCMA-15UL is ideal for automatic collection and removal of condensate from air conditioning, refrigeration and de-humidification equipment when gravity drainage is not possible or practical. Also suitable for high efficiency oil and gas-fired condensing furnace and condensing boiler equipment. This units includes a 6 ft. cord as well as a .5 Gal. reservoir.

• 1/50 hp high-performance motor pumps 65 Gal. of water per hour
• ABS tank, motor cover and volute
• Stainless steel motor shaft
• 1/2 Gal. collection tank

Asurity ULTRA Series 120V Condensate Pump, 22 ft Lift with Tubing. Translucent Tank For Easy & Fast Inspection. 22 ft maximum lift height. LED Indicators Confirm Pump Status. Built-in Safety Overflow Switch. Reversible deck for more installation options. Removable Check Valve for Easy Cleaning. Suitable for condensate up to 160degree F. Vibration dampening feet and motor mounts minimize sound. 20 ft of tubing included for easy installation. Mfg #ULTRACP-22T

• Translucent Tank For Easy & Fast Inspection
• 22 ft maximum lift height
• LED Indicators Confirm Pump Status
• Built-in Safety Overflow Switch

Leonard Control Rod Group Pam-11 Pv-Cr

• Bronze build provides durability
• Ideal for repairing PAM-II-ST old style thermostatic valve
• Resists corrosion to ensure safety and reliability
• Restores system to efficient performance

Utility gauge for commercial and industrial markets. This pressure gauge has a 15 psi/bar scale with a 2 in. dial and 1/4 NPT connection. It has a steel case, brass internals and plastic lens.

• 2 in. dial 1/4 NPT
• Accuracy 3-2-3% of span, ASME B40.1 grade B
• 15 psi/bar scale with no logo
• Black steel case with brass connection

Utility gauge for commercial and industrial markets. This pressure gauge has a 60 psi/bar scale and dry only. The dial size is 2 in. with a 1/4 NPT connection.

• 2 in. dial 1/4 NPT connection
• Accuracy 3-2-3% of span, ASME B40.1 grade B
• 60 psi/bar scale with no logo
• Black steel case with brass internals

Pump A Way is a durable and efficient hand pump for numerous applications inside and outside the home. The pump is manufactured of high quality impact and chemical resistant materials. Use for your entire pump project around the house. The Pump A Way is easy to use with each stroke pumping a whopping 32 oz. of liquid.

• Pump is manufactured of high quality impact and chemical resistant materials
• Some projects include removing waters from washing machines, dishwashers, sinks, showers, tubs, basins, valve boxes, condensation or drip pans, and sumps
• Pump removes a Gal. of liquid per 4 strokes
• Pump will not rust or corrode; pump is made of durable PVC
• Not made with NSF-14 (food grade) materials and is not recommended for food-based liquids

This air valve provides a method of injecting and holding air pressure in water systems. Other uses include pressurizing piping systems for pressure test and blowing out irrigation lines. It is a general purpose valve.

• General purpose - 1/4 in. MPT tank valve
• Working pressure 0-200 psi
• Working temperature -40 degree F to +225 degree F
• Opening pressure 60 psi
• Lead free

7-38P is for use with air conditioning and refrigeration condensate drains, condensate pump discharge lines and humidifier overflow drain lines. This braided tubing is designed to be kink resistant, lightweight and flexible. It will withstand rough handling and heavy usage while maintaining dimensional stability. Made of high quality materials with smooth interior and exterior that prevents sediment accumulation, allows easy flow. The tubing is easy to shape, bend and install.

• Clear Vinyl Chloride (PVC)
• Reinforced polyester caliber 300-500
• Extra rigid design resists crimping and kinking due to durometer value of 78-80 (shore A)
• Service temperature 140degree F. (60degree C.)
• Durometer: Shore 78-80A

The Pumptrol FSG2J21M4CP electromechanical pressure switch by Square D is the most trusted brand in residential, commercial and industrial pumping applications. This switch has a 30 psi to 50 psi pressure setting range activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached. The NEMA 1 enclosure has a 1/4 in. NPSF internal fluid connection and screw clamp terminals. The switch works with a 1.5 HP or less pump. The adjustable differential range is 15 psi to 30 psi and the cut-out range is 20 psi to 65 psi. The low-pressure cut-off (auto-start-off) operates at approximately 10 psig below the cut-in and will turn off the pump. The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratory (UL) Listed and Canadian Standards Association (CSA) Certified. For over 75 years, Square D pressure switches continue to meet the needs of our customers. Square D Pumptrol pressure switches are manufactured by Schneider Electric.

• If system pressure is lost for any reason, a low water condition for example, the automatic lower pressure/water cut-off feature will open the contacts, turning off the pump
• Universally accepted and recognized design is easy to wire, features drift proof cut-in and cut-out settings and has visible vertical contacts which are easy to inspect
• Switch is UL listed and Canadian Standards Association (CSA) certified
• Activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached
• Pressure switch is RoHS compliant, NSF certified to meet federal low lead requirements

Utility gauge for commercial and industrial markets. Black steel case, chrome bezel, copper alloy internals. 2 in. dial with 1/4 NPT, dry only case.

• 2 in. dial size with standard 1/4 NPT
• Black steel case with brass wetted parts
• Glass lens
• Accuracy 3-2-3% of span, ASME B40.1 grade B

The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.

• High quality
• Reliable performance
• Durability
• Easy to install

Pressure Switches are used to control electrically driven water pumps, suitable for all types of pumps: jets, submersible, reciprocating, etc. Pressure switches are needed for rural water systems that rely on wells to supply their water. Water is pumped from the well or other water source to the pressure tank and as the tank fills the air in the tank becomes pressurized. When the pre-set pressure is reached, the pressure switch contacts open to stop the pump. When water is used, the pressure in the pressure tank falls and as it reaches the pre-set cut in pressure of the switch the contacts close, starting the cycle over. These pressure switches are easily adjusted by following instruction inside the switch cover.

• Standard duty
• NEMA type 1 indoor enclosure
• 2 pole, rated 1-1/2 HP at 115 Vac, 2HP at 230 Vac
• Pressure connection: 1/4 in. NPSF, pressure setting 20-40
• Adjustable cut in/out: cut out range 20-65 psig

A full featured pump suitable for use with condensate from high efficiency condensing furnaces and boilers which produce acidic condensate. It has 22 ft. of lift compared to the typical 20 ft. Features include vibration dampening feet and motor mounts, metal hang tabs, 4 inlet holes, a clear indicator display, a float switch and check valve.

• The elastomeric motor mounting gasket dampens vibration
• Red, yellow, and green indicator lights show the pump status; the green shows the power applied to the pump, yellow shows the pump is running, and red is for high level alarm
• The rubber feet that support the pump help to dampen vibration which reduces noise
• 4 inlet versus 2 or 3 on other pumps provide the greatest installation versatility; inlet holes have a reinforced wall for durability
• Features a removable check valve which allows for hassle free cleaning
• 1/4 in. quick connect terminals provide easy connection to the built-in overflow switch
• 2 terminals are provided allowing the installer flexibility to connect the air handler shut-down
• Switch features SPDT isolated contacts ready for connection to building automation systems
• Pump comes equipped with shatterproof stainless steel hang tabs which have hole-and-slot design for easy mounting
• Tabs are located on convenient 8 in. centers

Asurity ULTRA Series 120V Condensate Pump, 22 ft Lift. Translucent Tank For Easy & Fast Inspection. 22 ft maximum lift height. LED Indicators Confirm Pump Status. Built-in Safety Overflow Switch. Removable Check Valve for Easy Cleaning. Suitable for condensate up to 160degree F. Vibration dampening feet and motor mounts minimize sound. Mfg #ULTRACP-22

• Translucent Tank For Easy & Fast Inspection
• 22 ft maximum lift height
• LED Indicators Confirm Pump Status
• Built-in Safety Overflow Switch

Would you like to know if water gets too high in your sump or sewage pit? Is it code in your area to have a high water alarm on your sump or sewage pit? If so, the PS-WS is an accessory for The Pro Series Deluxe Float Controller (DFC2, VSC2, TSC2) that will activate a warning light, an audible alarm, send a signal to the remote terminal, and send information through the USB port when water reaches the sensor (allowing for text, email and in app notifications using the PS-WiFi). It simply attaches to the discharge pipe with included mounting hardware and the 10 foot cord plugs in at the bottom of the Deluxe controller. Between the visual light, audible alarm and optional text or email notifications (when using the PS-WiFi) you can be In the know when you are on the go.

• Will activate a warning light, an audible alarm, send a signal to the remote terminal, and send information through the USB port when water reaches the sensor
• For use with the pro series deluxe float controller (DFC2, VSC2, TSC2) or pro series water alarm (PWA2)
• Easily attaches to the discharge pipe with included mounting hardware
• 10 ft. cord with plug

The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.

• High quality
• Replace old and worn parts
• No special tools needed
• Easy to install

Utility water test gauge. This gauge is used for pressure tests of residential and commercial water lines. This gauge has a 300 psi scale and a 3/4 in. female swivel connection for water lines.

• 3/4 in. female copper alloy swivel connection for water lines
• Top mounted to make it easy to read when connected
• Accuracy 3-2-3% of span, ASME B40.1 grade B
• 2-1/2 in. dial and 300 psi standard

The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.

• High quality
• Reliability
• Durability
• Attractive styling

The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.

• High quality
• Reliability
• Durability
• Attractive styling

The Pro Series Deluxe Vertical Switch Controller is one in a line of many Pro Series float switches available for sump, sewage and effluent applications. The Pro Series lineup gives customers more options to best fit their needs by having a Good, Better, Best philosophy. The Pro Series Deluxe Vertical Switch Controller (VSC2) is a premium product. It has a large float that rests vertically on a rod with minimal movement and sealed gold contacts for reliable high cycle operation. The vertical switch simply mounts to the discharge pipe at the activation height of your choosing with the included stainless steel hose clamp. The VSC2 is a piggy-back switch making it compatible with most sump, sewage, and effluent pumps. For easy installation the float switch can be unplugged from the controller, the run time is adjustable (after the float drops), and the controller has universal mounting tabs. For superior user features, the VSC2 exercises the pump weekly to extend pump life and has a system operating light to display that the control box is operating properly. It also monitors pump and power conditions, sounds an alarm when problems are detected and gives a visual light that pinpoints the remedy. Plus, it has a USB Data Port and Remote Terminal to connect to external devices, such as one of the Pro Series Pumps Connect modules, a home automation or security system or other devices for remote notification.

• Can be used in sump, sewage and effluent applications
• Mechanical float on rod
• Sounds an alarm and alerts when power has failed, a pump or float problem is detected or the 9V battery is low
• USB data port and remote terminal connect to external devices such as the Pro Series Pumps connect modules, home automation systems or other devices for remote notification
• Exercises the pump weekly to extend pump life
• Adjustable run time (after the float drops) from 5-45 seconds
• Adjustable to any activation height using included stainless steel hose clamp
• Float switch can be unplugged from controller for easy installation
• Minimal movement and sealed gold contacts for reliable high cycle operation
• Piggyback plug
• Easy installation
• Optional high water accessory available (PS-WS)
• Warranty matches the pro series pump it is purchased with, otherwise a 1 year warranty applies

Leonard Lvc Thermostatic Assembly Less Cover & Pointer

• Includes all necessary hardware for hassle-free installation
• Sturdy stainless steel build ensures durability
• Brass finish adds an attractive aesthetic appeal
• Restores system to efficient performance

for Use with All Brands of Sump and Sewage Pumps upto 1/2 HP,115-Volt, 13 Amp. Includes 10 ft. Cord. Ideal for 14 in. Dia or larger sump basins.

• Tethered style float switch has 10 ft. cord
• Replaces most standard float switches
• Ideal for 14 in. Dia or larger sump basins
• Piggyback-style plug with 10' cord, mounting strap included