Searched for "39121613"
Southwire ground rod clamps are used for connecting conductors to ground rods or rebar. This copper alloy clamp is suitable for direct burial. This clamp is specified for use with #10 SOL/STR - #2 STR Wire.
- cULus Listed
- Wire range: # 10 SOL/STR - # 2 STR
- Fits 5/8 in. grounding rod or 1/2 in. rebar
- Suitable for direct burial
- 1-pack
Southwire ground clamps are used to connect copper ground wire to a water pipe, copper tubing or ground rods. Product is suitable for direct burial. Suitable for use with # 10 STR - # 2 STR Wire.
- cULus listed
- Wire range: # 10 STR - # 2 STR
- 1/2 in. - 1 in. clamp size
- 1-pack
Southwire ground clamps are used to connect copper ground wire to a water pipe, copper tubing or ground rods. This ground clamp has zinc construction. The product is suitable for both indoor and outdoor applications.
- cULus Listed
- Wire range: # 10 SOL/STR - # 2 STR
- 1/2 in. - 1 in. clamp size
- 1-pack
The Square D by Schneider Electric Ground Bar Kit is an important accessory in your home or business electrical load center. The aluminum 23 terminal ground bar kit is used in Square D load centers. CSED devices and NQOD and NF panel boards. The kit has 23 terminals, each accepting (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, or (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire.
- Feeds wires to neutral bar in load centers
- Compact and lightweight
- 23 terminals
- ANSI certified
- UL Listed
A rod that is driven into the ground to provide electrical connection to the ground. Also to carry current safely away from a circuit in the event of an electrical surge. It is a copper clad metal rod with a copper coating with a minimum of 0.010 in., meeting or exceeding UL and ANSI specifications.
- Nominal diameter: 5/8 in.
- Length: 8 in.
- Pointed ground rod
- Nominal diameter in inches
- UNC: 5/8
- Copper clad coating is a minimum of 0.010 in.
- Length: 1-3/16 in.
- ANSI/UL 467
- ANSI/NEMA GR-1
- CSA - canadian standard
- ANSI C33.8
- Rural Utilities Service (RUS)
- Steel - cold drawn ASTM-A-1080
- SAE 1010-1035 carbon steel
- Tensile strength 80,000-100,000 psi
- Steel Rockwell hardness B80 (minimum)
- Copper coating is a minimum of 0.010 in., meeting or exceeding UL and ANSI specifications
- Company name, UL logo and/or CSA logo, control number and part number are located within 12 in. of the chamfered end of each rod
The Square D by Schneider Electric Ground Bar Kit is an important accessory in your home or business electrical load center. This 7 Terminal Ground Bar Kit is used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire.
- Used in load centers, CSED devices and NQOD and NF panel boards
- Feeds wires to neutral bar in load centers
- Compact and lightweight
- 7 terminals
- ANSI certified
- UL Listed
Ground bars are required in all panels (main service panels include ground and neutral). To be sure you are selecting the correct ground bar, divide the number of circuits in the panel by 2 and pick the closest numbered ground bar. For example, a 20-circuit panel would require a GBK10P. Eaton is a trusted name in electrical products for over 175-years.
- Distance between mounting holes is 1-3/4 in.
- Number of terminals: 21
- Size: 3/4 in.
- Used with: CH and BR loadcenters
- Includes: 1-2/0 lug
This Homeline Circuit Breaker Retaining Kit retains a back-fed breaker when used to secure a circuit breaker to the interior of a load center. It is designed for use with HOM48L125GC, GRB and HOM612L100F/S, RB load centers. This retaining kit features a UL listing and ANSI certification to ensure safety.
- Secures circuit breakers to interior of a load center
- Retains a back-fed breaker
- For use with HOM612L100F/S, RB (outdoor) and HOM48L125GC, GRB load centers
- UL listed and ANSI certified
Southwire combination grounding screws are used in electrical boxes and on electrical devices for connecting ground conductors. The head on the grounding screws is compatible with Hex, Phillips, slotted and #2 Robertson drive styles. Comes in a convenient 100-Pack.
- 10-32 screw
- Hole-finding screw tip
- 100-pack
- Compatible with Hex, Phillips, slotted and #2 Robertson drive styles
A grounding rod is designed to protect us against electricity that comes from the utility transformer. Its purpose is to connect electrical equipment to the service to provide a safe path back to the source so that if there's a ground fault it will complete the circuit and trip the breaker. If you place a current probe around the conductor going to earth or the ground rod itself you should never see any current flowing on the conductor.
- Nominal diameter: 5/8 in.
- Length: 8 in.
- Galvanized coating: ASTM-A 123 or ASTM-A 153
- ANSI/UL 467
- ANSI/NEMA GR-1
- CSA - Canadian standard
- Rural utilities service listed and accepted
- Steel-ASTM-A-529/grade 50 or cold drawn ASTM-A-1080/C-1008-1035
- Tensile strength 80,000-100,000 psi
- Galvanized to ASTM-A-153 for zinc-coated corrosion protection after fabrication
- Galvanized ground rod surfaces are rigid, free of seams and slivers; galvanized coating is smooth with no burrs or runs
- Unique four-sided point
- Company name, part number, UL and/or CSA Logo and control number within 12 in. of the blunt end of each rod
Reliable product from the technology leader. Technology enabling reliability. When it comes to ready availability, easy installation, and fewer callbacks, you need a manufacturer you can trust. Our products and systems are engineered to take on the most demanding conditions, always service and maintenance network, complete support is always there.
- Neutral lug kit for Siemens load centers is ANSI certified and CSA and UL listed, the lug kit is suitable for use with an EQIII load center and is compatible with wire range #4 - 2/0 AWG
- Neutral lug kit is for use with a Siemens load center, this lug kit is compatible with wire range #4-2/0
- Lug kit is suitable for use with EQIII load center
- Neutral lug kit is ANSI certified, CSA approved, and UL listed
Ground bars are required in all panels (main service panels include ground and neutral). To be sure you are selecting the correct ground bar, divide the number of circuits in the panel by 2 and pick the closest numbered ground bar. For example, a 20-circuit panel would require a GBK10P. Eaton is a trusted name in electrical products for over 175-years.
- Distance between mounting holes is 1-3/4 in.
- Number of terminals: 5
- Size: 3/4 in.
- Used with: CH loadcenters, for 2/4 circuit loadcenters use type GBK5 or GBK520 ground bar
- Includes: 1-2/0 lug
The Square D by Schneider Electric Ground Bar Kit is an important accessory in your home or business electrical load center. The aluminum 15 Terminal Ground Bar Kit is used in Square D load centers, CSED devices and NQOD and NF panel boards. The kit has 15 terminals, each accepting (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, or (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire.
- Used in load centers, CSED devices and NQOD and NF panel boards
- Feeds wires to neutral bar in load centers
- Compact and lightweight
- 15 terminals
- ANSI certified
- UL Listed
With a focus on improved safety, revolutionary design and ease of installation, Leviton takes the load center into the 21st century. Leviton offers a full line of accessories to meet every need when installing the Leviton Load Center. Locking devices, lugs, ground and neutral bar kits, conduit hubs, sealing rings and more are all available to ensure an accurate and quick installation.
- Designed for use with Leviton load center panels
- Required for all panels
- Easily mounted inside the panel
- Each of its 13 terminal openings accepts 14, 4-Gauge wire
The Eaton 10-Terminal Grounding Bar Kit is suitable for use with type BR load centers or type CH load centers. Ground bars are required in all panels (main service panels include ground and neutral). To be sure you are selecting the correct ground bar, divide the number of circuits in the panel by 2 and pick the closest numbered ground bar. For example, a 20 circuit panel would require a GBK10P. The kit includes a 10-terminal ground bar and one 2/0 lug.
- For use as a grounding bar in a load center
- Suitable for use with type BR load centers or type CH load centers
- 10 terminals
- One 2/0 lug
EC3GB series ground bars are intended for use in Siemens ES and PL series of load centers with a box height of 24, 27, 29, 30, 35, 36, 38 or 42 in. For the ES and PL lines of load centers this would include 125 Amp load centers of 24 1 in. spaces or more, 150 Amp and 200 Amp load centers of 20 1 in. spaces or more and all 225 Amp load centers. The ground bars can be mounted in one of 4 locations inside the load center: top right, top left, bottom right and bottom left. Up to 4 ground bars can be added to each load center.
- Ground bar for ES and PL load center series and has 21 positions
- Each terminal opening accepts number 14-4 CU/AL conductors
- EC3GB series ground bar
- Includes 2/0 lug
- Product is UL listed
EC2GB series ground bars are intended for use in Siemens ES and PL series of load centers with a box height of 18, 21, 23, 24, 27, 30, 35 or 36 in. For the ES and PL lines of load centers this would include up to 200 Amp load centers that have (40) 1 in. circuit spaces or less. The ground bars can be mounted in one of 4 locations inside the load center: top right, top left, bottom right and bottom left. Up to 4 ground bars can be added to each load center.
- Ground bar for ES and PL load center series and has 12 positions
- Each terminal opening accepts number 14-4 CU/AL conductors
- EC2GB series ground bar
- Includes 2/0 lug
- Product is UL listed