Searched for "40101700"
Supply your technicians with only the best components to get the job done the right way the first time. These contactors are manufactured from the highest quality materials. Backed by designs that are tried and tested to perform.
- Accordance with U.L. bulletin no. 508 Industrial control equipment, contactors meet specifications for devices up to 600 VAC
- Coils have class B insulation
- Includes lug, spade terminals, and covers
- Single pole include shunt
Enclosed fan relay type 184, 24-Volt coil, SPNO-SPNC. Used for switching Solenoids, fan motors and general purpose switching. UL file number E12139 CSA file number LR13360.
- Coil-voltage 24-Volt
- Normally opened / closed type
- 1/4 in. spade connections 5 pin
- Coils frequency 50 Hz/60 Hz
The Emerson two pole double throw semi-enclosed relay for use in vending machines, appliances, heating and air conditioning applications, and general-purpose switching. This is a switching relay is a 2 Pole relay with 24 VAC coil. This Type 91 relay features DPDT switching and two sets of power rated contacts.
- Easy install
- -40 degree F to 130 degree F temperature range
- Coil voltage 24 Hz
- Coil DC resistance 17.5
- Coil MA 334
- Coil nominal VA 9.5
- Coil inrush VA 22
- Time delay relay. 24 volt coil
- On: 1-25 seconds. Off: 65-115 seconds
- Replacement for Goodman B13707-38
- UL® and CSA® approved
- 24 volt control circuit
- Five second delay between all subsequent stages, unless they function together
- Used on gas and electric units
The Emerson 90-244 2 pole is a definite purpose contactor for air conditioning and heating equipment. This contactor features low VA coil for cooler operation. The universal mounting bracket fits existing mounting holes. 24 VAC. 30 Amp.
- Low voltage coil for increased life
- Quiet operation
- Universal mounting bracket fits most applications
- Double break contacts ensure positive make and break
- 24-Volt AC
- Resistance DC OHMS 11
- Current MA 150
- Nominal VA 6
- Maximum inrush VA 32
24-Volt Heat Sequencer, fan and electric, 2 Switches. On Timings, 30-90 seconds. Off timings 1-30 seconds. Replaces Honeywell, MARS, TOD, GEMLINE, Klixon (Texas Instruments). UL component recognized.
- Direct replacement for most fan / heat sequencing functions
- 2 switches
- On timings: 30-90 seconds
- Off timings: 1-30 seconds
- 24-Volt input control
- Multi-poise mounting
- Any contacts (except M1 and M2) can be used as auxiliary contacts
- Double quick-connect terminals for combination loads
The Emerson 24A34 series electric heat sequencer is a direct replAcement for most fan and heat sequencing functions. This electric heat sequencer features 2 switches and multi-poise mounting. 24 volt input control.
- Terminal markings are equivalent to other types
- 24-Volt input control
- Multi-poise mounting
- Double quick-connect terminals for combination loads
- 1 switch
- On timings 30 - 90 seconds
- Off timings 1 - 30 seconds
This definite purpose contactor meets UL508 specifications for devices up to 600 Vac. The coils have class B insulation. It includes lugs, spade terminals and covers.
- 180/150/120 locked rotor Amps
- 30 inductive Amps
- 40 resistive Amps
- Auxiliary switches sold separately
This is a genuine Goodman replacement part. Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details. Professional installation recommended.
- Sequencer B12565-51
- HVAC application
- Dimensions: 0.99 in. x 0.99 in. x 0.99 in.
- Quality build
The Emerson 90-370 heavy-duty general-purpose relay for heating and cooling applications and general switching. This is a totally enclosed relay, which operates in any position. This relay provides general-purpose switching for heating and cooling applications.
- SPDT
- 24V VAC coil, 50/60hz
- Resistive DC OHMS 77
- Coil nominal current MA 125
- Coil nominal VA sealed 3
- Inrush VA 4
This is a genuine GOODMAN replacement part. Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details. Professional installation recommended.
- HVAC application
- Dimensions: 11.25 in. x 8 in. x 0.5 in.
- For use with GOODMAN and Amana equipment
- PCB, defrost control
This is a genuine Goodman replacement part. Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details. Professional installation recommended.
- SEQUENCER B12565-52
- HVAC application
- Dimensions: 4 in. x 23.75 in. x 30.75 in.
- Quality build
Enclosed fan relay type 84, 24-Volt coil, SPNO. Used for switching Solenoids, fan motors and general purpose switching. UL file number E12139 CSA file number LR13360.
- Coil-voltage 24-Volt
- Switch action single pole, normally open
- Coils frequency 50 Hz/60 Hz
- Spade connections
The latest generation in vibration dampening technology and the most effective vibration dampening pad available on the market. The EVA Pad was tested against other pads at four different vibration settings and in the most severe vibration extremes, the EVA Pad outperforms cork and rubber by a margin of greater than 3:1. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.
- Superior performance is due to the special composite foam center which is much more structurally sound than cork
- It is not affected by oils or chemicals that can break down cork and is much more effective at vibration dampening than solid rubber
- Most effective vibration dampening pad available on the market
- EVA pad outperforms cork and rubber by a margin of greater than 3:1
- Designed to withstand 50 psi
Since UltraLite is a lightweight product, it is easy for handling tasks on site. It is one of the lightest equipment mounting products available today. Where local codes supersede the International code and require a pad thicker than 2 3 UltraLite is the solution.
- Ultralite pad performs extraordinarily well under strict testing criteria, it does not craze, soften, or delaminate
- Ultralite has a proven resistance against R-22 and R-134a, compressor oil, salt solution, and synthetic canine urine
- Engineered polystyrene core in the UltraLite lightweight concrete pad absorbs and dampens vibration associated with normal operation of a condensing unit
- Ultralite lightweight concrete pad is specifically engineered to have long-term exterior weather resistance
- Textured surface prevents equipment sliding
- UltraLite lightweight concrete pad literally installs in seconds while providing a solid foundation for the condensing unit
- Water vapor evaporates through the UltraLite, preventing the expansion of cracks
- UltraLite is resistant to heating caused by the compressor; additionally, the surface is resistant to heat from incidental torch flame during site installation
- Since the UltraLite is designed for life outdoors, it is suitable for outside storage prior to the site installation
Century Multi-horsepower Condenser Fan Motor
- 1/3 - 1/6 HP
- 208 - 230 Volts
- 1075 RPM
- 2.6 - 1.8 Amps
- Ball Bearings
- 5-5/8" Diameter
- 70 degree C Ambient
- 48" Color Coded Lead
- 1/2" x 6.5" Shaft Length
- 4.74" Shell Dimensions
- Class "F" Insulation
- 60 HzOperation
Time delay initiates when power is applied. Load is energized at completion of timing cycle. Timer will reset on power interruption or when thermostat disconnects.
- Delay on break timers (DOB)
- Adjustable time delay on break relay 6 seconds to 5 minutes
- 1/4 in. male quick connect terminals
- Cut the jumper wire to use in 120/240-Volts
Eaton offers the most complete line of Definite Purpose (DP) contactors in the industry. Designed for heating, ventilation, air conditioning and refrigeration (HVACR) applications, Eatons DP contactors are designed to handle the most challenging installations. Eatons DP Contactors offer an efficient design with low VA coil ratings and straight-through wiring.
- These ampere and horsepower rated devices from Eatons electrical sector are subjected to stringent quality assurance inspections and testing procedures
- 15-360a contractors ratings
- Single-, 2-, 3- and 4 pole configurations
- Open components and enclosed designs available
Fasco Condenser Motor
- 1/5 H.P.
- 208-230 Volts
- 1.3 Amps
- CW Rotation
- POC5 Capacitor
- 1075 RPM
- Sleeve Bearings
- 5-5/8" Diameter
- Totally-Enclosed Enclosure
- Stud Mounting
- 4-1/8" Shaft Length
- Permanent Split Capacitor Motor Type
- 48 Frame
- Automatic Overload
- 1 Phase
- 1/2" Shaft Diameter
- 60 Hertz
- 1/2" x 4-1/8" Shaft Dimension
- 3-3/4" Length Less Shaft
The First Co. HX fur down air fan coil with hot water heat. Equipment should be sized, selected and installed by a qualified professional. To ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details.
- 2 ton fan coil piston
- 6kW electric heat
- 208/240v
- 24v controls
The Emerson 90-290Q through 90-295Q relays for switching single or two speed fan motors, solenoids, relays, resistive loads, and general-purpose switching. This fan relay features a compact, totally enclosed design, which provides quiet, reliable and economical operation. This relay has SPNO switching. 24 VAC.
- Compact and fully enclosed design
- Quiet operation
- SPDT
- 208/240 VAC coil
- Resistance DC OHMS 90
- Coil nominal current MA 125
- Coil nominal VA sealed 3
- Inrush VA 4
The Emerson 24A34-3 Electric Heat Sequencer is a direct replacement for most fan/heat sequencing functions. This sequencer features 2 switches and multi-poise mounting. This sequencer features 2 switches and multi-poise mounting.
- Direct replacement for most fan / heat sequencing functions
- 2 switches
- On timings: 1-20 sec
- Off timings: 40-110 sec
- 24-Volt input control
These definite purpose contactors meet UL508 specifications for devices up to 600 Vac.All single pole include shunt. It also inludes lugs, spade terminals and covers.The coils have class B insulation.
- Definite purpose contactors
- 30 inductive Amps
- 40 resistive Amps
- Auxiliary switches sold separately
A very durable contacted that is capable of carrying more amperage. Manufactured with quality material that ensures a good direct contact so the device can function properly. This contactor works with 99% of residential AC units.
- 40 inductive Amps
- 50 resistive Amps
- 240/200/160 locked rotor Amps
- Auxiliary switches sold separately
Fasco Condenser Fan Motor
- 1/4 HP
- 208 / 230 Volts
- 1075 RPM
- 1-Speed
- 1.8 Amps
- Totally Enclosed
- Reversible Rotation
- POC5 Capacitor
- Sleeve Bearings
- 5.6" Diameter
- 1.2 Load Factor
- Stud/Belly Band/Tapped Holes Mounting
- 1.00 Service Factor
- 6-1/2" Shaft Length
- Permanent Split Capacitor Motor Type
- 48 Frame
- Automatic Overload
- 1 Phase
- 1/2" Shaft Diameter
- 1 Shaft
- 60 Hertz
- 1/2" x 6-1/2" Shaft Dimension
- 4" Length Less Shaft
The Emerson 90-118E fan control center combination transformer and relay combination, SPNO/SPNC, 120 V primary. This fan control center can be installed on on a 4 in. x in. junction box. The pre-wired line voltage connections and color-coded and pre-striped leads provide easy installation. Energy limiting class II transformer design and low voltage connections on terminal board.
- 24 VAC secondary
- Line voltage connections pre-wired
- Color coded pre-stripped leads for easy install
- Low voltage connections on terminal board
- Easy installation on a 4 in. x 4 in. junction box
E Lite is a plastic pad designed as a mounting base for condenser equipment. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but durable. A subtle texture prevents unit slide and presents a classic appearance which is enhanced by rounded edges.
- Generous individually engineered ribbing for optimum self-leveling ground support
- Each pad is molded with its size in raised letters for easy identification
- Rugged design provides uniform and generous ribbing for optimum self-leveling ground support without inserts
- E Lite is drillable for securing unit
- Does not crack, flake or warp when tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution (of 20% by volume)
- Flawless performance under the 25-cycle regime specified by ASTM C67
- DiversiTechs most popular pad due to its rugged durability, strength and clean looks
This is a genuine Goodman replacement part. It is designed for use in HVAC application. It is manufactured in the United States.
- Brand Compatibility: Goodman
- coil tubing assy
- Manufactured in the United States
- 2.5 Ton
- Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty; see installation guide for more details
- Professional installation recommended
- HX Series
- Horizontal Fan Coils (Uncased)
- Heat Pump or DX - With Electric Heat
- (Heat pump w/Heat requires kit # 942-1)
- Features:
- Sloped and insulated drain pan
- Primary and secondary drains
- Easy service access
- 240/24V relay/transformer
- Copper tube coils
- Factory installed electric heat
- Metering Device: Piston
- For use with R22 or R410A refrigerant
- Dimensions (HxWxD): 10" x 43-1/4" x 21"
- 208/240-Volt power
- 24-Volt controls
- Factory installed 8kW electric heat
- Shipped with 2.5 ton piston
This is a genuine GOODMAN replacement part. It is designed for use in HVAC applications. See installation guide for more details. Professional installation recommended.
- Voltage: 208/230
- Compatibility: GOODMAN equipment
- Horse power: 1/4
- Motor 1/4HP 1SP 6PL
The Goodman 2 Ton Upflow/Downflow Evaporator Coil 21 in. W Model CAPFA2318C6 is equipped with advanced features that ensure the comfort of your space. These features range from the check flowrater for cooling and heat pump applications to an all-aluminum evaporator coil. The evaporator coil is also furnished with a galvanized, leather grain-embossed finish. These are the features that make the Goodman evaporator coil a worthwhile investment.
- Compact and lightweight all-aluminum evaporator coil with AlumaFin7 technology
- Optimized for use with R-410A refrigerant
- Check flowrator for cooling and heat pump applications
- Vertical application
- 21 in. depth for easier attic access
- Foil-faced insulation covers the internal casing to reduce cabinet condensation
- AHRI certified
- ETL listed
- Rust resistant, thermoplastic drain pans featuring a low water-retention design
- Galvanized, leather grain-embossed finish
Compact and lightweight all-aluminum evaporator coil with AlumaFin7 technology
- Optimized for use with R-410A refrigerant
- Check flowrator for cooling applications
- Rust resistant, thermoplastic drain pans featuring a low water-retention design
- Foil-faced insulation covers the internal casing to reduce cabinet condensation
- Single-piece access panel with tight seal helps to keep conditioned air from escaping
- Seal tight customized suction and liquid grommets for easy installation and removal
- 21" depth for easier attic access
- Vertical application
- Galvanized, leather grain-embossed finish
- AHRI certified
- ETL listed
- All-aluminum metallurgy provides superior corrosion resistance
- Compatible with R-410A refrigerant
- Multi-louvered aluminum fin design helps support efficient heat transfer
- Hydrophilic fins provide superior condensate management
E Lite is a plastic pad designed as a mounting base for condenser equipment. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but durable. A subtle texture prevents unit slide and presents a classic appearance which is enhanced by rounded edges.
- Generous individually engineered ribbing for optimum self-leveling ground support
- Each pad is molded with its size in raised letters for easy identification
- Rugged design provides uniform and generous ribbing for optimum self-leveling ground support without inserts
- E Lite is drillable for securing unit
- Does not crack, flake, or warp when tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution (of 20% by volume)
- Flawless performance under the 25-cycle regime specified by ASTM C67
- DiversiTechs most popular pad due to its rugged durability, strength, and clean looks
Century Condenser Fan Motor
- 1/4 - 1/5 - 1/6 HP
- 208 - 230 Volts
- 1075 RPM
- 1-Speed
- 2.0 Amps
- Totally Enclosed
- Multi-mounting system
- Water-resistant reversing plug
- Double sealed ball bearings
- 36" leads
- 60 Hz
- 60 degree C ambient
- Continuous duty, air over
- All angle mount
- Class B Insulation
- UL and CSA recognized
- Reversible rotation
- Replaces motors with a 4.33, 4.42 and 4.62 inch mounting bolt circle (BC).
This is a genuine GOODMAN replacement part. It is designed for use in HVAC applications. See installation guide for more details. Professional installation recommended.
- Voltage: 208/230
- Compatibility: GOODMAN equipment
- Horse power: 1/6
- Motor, service
HX series of fan coil is for small room designs where a typical closet application can not be used. The small height allows the air handler to be mounted in a ceiling fur down space saving valuable floor space. Can be used for both strait cool and heat pump condensers. (check for compatibility) Made with high quality products and manufacturing.
- 3 ton size
- 5kW factory installed electric heat
- 240-Volt single connection power
- 24-Volt controls and compatible with most 24-Volt stats
The First Co. HX fur down air fan coil with hot water heat. Equipment should be sized, selected and installed by a qualified professional. To ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details.
- 2-ton
- 10-KW electric heat
- 208/240-Volt
- Piston metering
The First Co. HX fur down air fan coil with hot water heat. Equipment should be sized, selected and installed by a qualified professional. To ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details.
- 208/240-Volt power
- 24-Volt controls
- Factory installed R410 TXV (non-bleed type)
- Insulated and coated galvanized steel drain pan is sloped for proper drainage
HX series of fan coil is for small room designs where a typical closet application cannot be used. The small height allows the air handler to be mounted in a ceiling fur down space saving valuable floor space. Can be used for both strait cool and heat pump condensers. (check for compatibility) Made with high quality products and manufacturing.
- 2.5 ton size
- 208/240-Volt electrical
- 24-Volt controls and compatible with most 24-Volt stats
- Compatible with most 24-Volt stats
E Lite is a plastic pad designed as a mounting base for condenser equipment. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but durable. A subtle texture prevents unit slide and presents a classic appearance which is enhanced by rounded edges.
- Generous individually engineered ribbing for optimum self-leveling ground support
- Each pad is molded with its size in raised letters for easy identification
- Rugged design provides uniform and generous ribbing for optimum self-leveling ground support without inserts
- E Lite is drillable for securing unit
- Does not crack, flake or warp when tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution (of 20% by volume)
- Flawless performance under the 25-cycle regime specified by ASTM C67
- DiversiTechs most popular pad due to its rugged durability, strength and clean looks
Replacement cooling coil. For model 24VAQ or 24VDX units. Will accept R410a or R22 Refrigerant.
- 16 inches wide
- 16 inches tall
- 3.5 inches deep
- with Piston
Fasco Condenser Fan Motor
- 1/8 HP
- 208 / 230 Volts
- 1025 RPM
- 1-Speed
- 0.9 Amps
- Totally Enclosed
- Counter Clockwise Rotation
- Sleeve Bearings
- 5.6" Diameter
- 1/2" x 3-1/2" Shaft Dimension
- 3-3/4" Length Less Shaft
- Totally Enclosed
- Counter Clockwise Rotation
- Sleeve Bearings
- 1-Speed
Fasco Condenser Motor
- 1/5 H.P.
- 208-230 Volts
- 1.2 Amps
- Reversible Rotation
- POC5 Capacitor
- 1075 RPM
- Sleeve Bearings
- 5-5/8" Diameter
- Semi-Enclosed Enclosure
- Stud/Belly Band Mounting
- 6" Shaft Length
- Permanent Split Capacitor Motor Type
- 48 Frame
- Automatic Overload
- 1 Phase
- 1/2" Shaft Diameter
- 1 Shaft
- 60 Hertz
- 1/2" x 6" Shaft Dimension
- 3-1/2" Length Less Shaft
- Permanent Split Capacitor Motor Type
- Reversible Rotation
- Semi-Enclosed Enclosure
- Automatic Overload
This is a genuine GOODMAN replacement part. It is designed for use in HVAC applications. See installation guide for more details. Professional installation recommended.
- Built with quality in mind
- Replacement part
- Slant coil
- Optimum performance
Fasco Condenser Motor
- 1/8 H.P.
- 1 Speed
- 208-230 Volts
- 0.8 Amps
- CW Rotation
- POC4 Capacitor
- 1650 RPM
- Sleeve Bearings
- 5-5/8" Diameter
- Totally-Enclosed Enclosure
- Stud Mounting
- 1-1/2" Shaft Length
- Permanent Split Capacitor Motor Type
- 48 Frame
- Automatic Overload
- 1 Phase
- 1/2" Shaft Diameter
- 60 Hertz
- 1/2" x 1-1/2" Shaft Dimension
- 3-1/4" Length Less Shaft
The First Co. HX fur down air fan coil with hot water heat. Equipment should be sized, selected and installed by a qualified professional. To ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details.
- 208/240-Volt power
- 24-Volt controls
- Factory installed piston type metering device
- Factory installed 5kW electric heat
OEM replacement part for First Co. units. AC and heating control board for HB/MB/UCQ units. This board no longer has yellow wire connections.
- Time delay
- pump timer
- fan delays
- TT connections for boilers
This is a genuine GOODMAN replacement part. It is designed for use in HVAC applications. See installation guide for more details. Professional installation recommended.
- Built with quality in mind
- Replacement part
- Slant coil
- Optimum performance