Searched for "40140000"
Engineered for reliability, The Taco Heat Motor Power Head provides a time proven method for operation of hydronic zone valves. The exclusive heat motor design operates silently, while the twist off head allows for serviceability without disturbing system connections. This power head is 24 VAC powered with an isolated end switch.
- Isolated end switch
- 24 VAC powered
- For Taco series 570 zone valves (570, 571, 572, and 573)
- Allows for service of valve without removing it
The 005-050RP Cartridge Assembly is used on several models of Taco circulators. This kit takes the place of conventional seal kits and is extremely easy to install. The Cartridge comes with all the hardware needed to extend your Taco Circulator's operating life.
- Repair part
- Includes casing body bolts
- Easy to install
- 3-year warranty
Exact Replacement Plastic Impeller for Broan 9910379H. Light-weight design reduces bearing wear and vibration. Celcon plastic construction.
- Broan exact replacement impellers
- Blade: 4-9/16 in. O.D.
- Hole: 0.218 in. I.D.
- Made in China
The Armstrong SBA contain an interchangeable module that includes a stainless steel pump shaft a housing that contains a precision crafted front and back end bearings that are permanentlty lubricated. Safer solutions for Facility and service personnel. faster onsite service and replacement.
- S&H #2 Series Maintenance-free Seal Bearing Assembly with Impeller
- Universal- fits B&G 3 piece circs
- A longer circulator life without maintenance (regular oil lubrication is not required)no more oil pools on floor
- Stainless steel face plate, coupler face guard meets or exceeds OSHA standards
- The standard for 65 years in hydronics
- Repairable, replaceable, environmentally friendly and now maintenance free
The Taco LWCO provides reliable protection for all types of boilers, from small residential hot water boilers to large industrial steam boilers. The boiler's minimum safe operating water level is specified by each manufacturer. Should the water level dip below that specified level, heat will accumulate quickly causing significant damage to the boiler and a potential external safety hazard. The Taco LWCO prevents this hazard from occurring. The LWCO can be used as a primary or secondary low water cutoff on steam boilers up to 250 psi, a primary limit control on hot water boilers or to protect pumps from running dry in condensate receiver tank applications. The LWCO can also activate alarm systems or automatic water feeders.
- Patented adjustable probe sensitivity
- External LEDs and simplified wiring for easy installation and testing
- Automatic or manual reset mode
- Standard on-board (NEMA 1) or remote (NEMA 4) probe
- LT models include external test button, adjustable Delay on Break (DOB) and Delay or Make (DOM) features
Aquastat Controllers are immersion type devices for limiting or regulating the temperature of liquids in boilers, storage tanks and other applications where temperature control is required. Direct or well immersion Tradeline models include heat-conductive compound. Circulator Control and High Limit or Low Limit.
- Totally enclosed micro switch snap-acting switches operate on temperature rise to set point
- Visible control point scale and external adjustment screw permit easy setting
- Horizontal or vertical insertion of the sensing element
- Remote bulb model may be used to sense air temperature in ducts and in outside air sensing applications
- Direct or well immersion Tradeline models include heat-conductive compound
- Temperature range maximum ambient-150 degree F
- Operating temperature range 100 degree F to 240 degree F
- Differential temperature (F) 5 degree F to 30 degree F adjusted
- SPDT switching action
- Stop factory-set at 240 degree F (116 degree C); heat-conductive compound
lead free bronze flanges. makes installation and service easy. provides a strong and water tight connection between pipe and circulator.
- For use with Astro 220 and 225 SSU models
- 1-1/4 in. NPSM x 3/4 in. sweat
- Lead free
- Set contains 2 half unions and gaskets
- Easy to install
- For use with copper pipe
- Water tight connection
- High quality
- Genuine factory replacement
- Complies with California & Vermont lead free laws
The DELAVAN 1.35 70A Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type A-nozzles are mainly used on burners with a hollow cone air pattern and for through puts up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion. This boiler replacement part is compatible with an oil-burning appliance.
- Precise spray angles and optional spray uniformity through new machining process
- Reduced distributor size with shorter tangential slots to avoid plugging
- Aerodynamic body configuration
- Rolled threads to avoid metal chips and burrs
- Sintered filter for maximum protection
- Boiler replacement part is compatible with an oil-burning appliance
- ISO 9001 certified
The DELAVAN 0.85 70W Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type W-nozzles are neither truly hollow nor solid. These nozzles frequently can be used in place of either solid or hollow cone nozzles between 0.40 and 8.00 GPH, regardless of the burners air pattern. The lower flow rates tend to be more solid. This boiler replacement part is compatible with an oil-burning appliance.
- Precise spray angles and optional spray uniformity through new machining process
- Reduced distributor size with shorter tangential slots to avoid plugging
- Aerodynamic body configuration
- Rolled threads to avoid metal chips and burrs
- Sintered filter for maximum protection
- Boiler replacement part is compatible with an oil-burning appliance
- ISO 9001 certified
SuperVent, purges air through a no clog vent assembly, to control dirt and debris and minimize air vent fouling in Hydronic heating systems, while eliminating the need for bleeding. Used in Residential or Commercial closed loop hydronic heating or chilled water systems. Can be cleaned in place.
- Stainless steel concentrator which eliminates gurgling noise
- Bronze body for rigid construction
- No clog vent
- Dirt and debris resistant
- Sweat connections
- 1/2 in. connection size
- Operating temperature range (F)240 degree F maximum
- 22 Cv capacity
- Maximum safe operating pressure 125 psi
- Rugged design stands up to tough conditions and continuous service
The Armstrong ball bearing SBA contain an interchangeable module that includes a stainless steel pump shaft and a housing that contains precision crafted front and back end bearings that are permanently lubricated. Safer solution for facility and service personnel. faster on site service and replacement.
- S&H #3 Series Maintenance-free Seal Bearing Assembly without Impeller
- Universal- fits B&G 3 piece circs
- A longer circulator life without maintenance (regular oil lubrication is not required) no more oil pools on floor
- Stainless steel face plate, coupler face guard meets or exceeds OSHA standards
- The standard for 65 years in hydronics
- Repairable, replaceable, environmentally friendly and now maintenance free
The DELAVAN 1.20 70A Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type A-nozzles are mainly used on burners with a hollow cone air pattern and for through puts up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion. This boiler replacement part is compatible with an oil-burning appliance.
- Precise spray angles and optional spray uniformity through new machining process
- Reduced distributor size with shorter tangential slots to avoid plugging
- Aerodynamic body configuration
- Rolled threads to avoid metal chips and burrs
- Sintered filter for maximum protection
- Boiler replacement part is compatible with an oil-burning appliance
- ISO 9001 certified
The DELAVAN 0.85 70A Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type A-nozzles are mainly used on burners with a hollow cone air pattern and for through puts up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion. This boiler replacement part is compatible with an oil-burning appliance.
- Precise spray angles and optional spray uniformity through new machining process
- Reduced distributor size with shorter tangential slots to avoid plugging
- Aerodynamic body configuration
- Rolled threads to avoid metal chips and burrs
- Sintered filter for maximum protection
- Boiler replacement part is compatible with an oil-burning appliance
- ISO 9001 certified
This 1 in. isolation pump flange is designed to isolate circulator pumps to facilitate circulator pump replacement or repairs. It features a brass body and flange with bottom loaded blowout proof stem, Buna-N Stem O-Ring seal, and virgin PTFE seat. Optional T-handle included.
- Brass body and flange
- Buna-N stem O-ring seal
- Solder end connection
- Virgin PTFE seats
- Optional T-handle included
- Helps with circulator pump replacement or repairs
3-5/32" Centers
- Fits B&G Series 100B,PRAB,NBF-22,NBF-12,NBF-36,PL-36B,PL-55B and Armstrong Astro 30 and S-25 Pumps
- High-quality bronze body enables long-term use
- Features 150 maximum PSI
- Comes with 2 flanges
- Works well with Armstrong Astro 30 and S-25 pumps, Bell & Gossett series 100B, PRAB, NBF-22, NBF-12, NBF-36, PL-36B, and PL-55B models
This 3/4 in. hose connection vacuum breaker permits the attachment of portable hoses to hose thread faucets and prevents the reverse flow of polluted water into the potable water supply due to backsiphonage. It consists of a brass body construction, stainless steel working parts, and a rubber diaphragm and disc. It is secured with allen head set screw. It is ideal for inside and outside, health hazard installations requiring non-continuous pressure such as service sinks, swimming pools, photo developing tanks, laundry tubs, wash racks, dairy barns, marinas, and general outside gardening uses. Check with local inspection authorities for installation requirements. Maximum pressure is 125 psi (8.6 BAR).
- Brass body
- Durable rubber diaphragm and disc for consistent positive seating
- Allen set screw
- Includes rubber diaphragm and disc and draining stem
- Designed to prevent the backflow of polluted water from entering into the potable water supply
- Ideal for inside and outside, health hazard installations requiring non-continuous pressure such as service sinks, swimming pools, photo developing tanks, laundry tubs, wash racks, dairy barns, marinas, and general outside gardening uses
- Maximum pressure is 125 psi
The DELAVAN 1.10 70B Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type B-nozzles produce a spray that distributes droplets uniformly throughout the complete pattern. The spray pattern becomes progressively hollower at higher flow rates, particularly above 8.00 GPH. Provides smooth ignition and efficient combustion, particularly in larger burners. This boiler replacement part is compatible with an oil-burning appliance.
- Precise spray angles and optional spray uniformity through new machining process
- Reduced distributor size with shorter tangential slots to avoid plugging
- Aerodynamic body configuration
- Rolled threads to avoid metal chips and burrs
- Sintered filter for maximum protection
- Boiler replacement part is compatible with an oil-burning appliance
- ISO 9001 certified
All the features you trust from the original Isolator Uni-Flange ball valve, plus a 360 degree rotating flange that allows for orientation to any degree necessary for your installation. This forged brass full port ball valve features a blow-out proof stem, adjustable packing glands and a stainless steel snap ring for extra stability during installation. The only way to isolate circulator pumps.
- Conical inlet to minimize turbulence
- Replaces 3-components, eliminates 2-leak paths, saves approximately 20 minutes in labor
- Fits virtually any standard circulator pump
- Available with slotted holes for high velocity pumps
- Prevents electrolysis
- Eliminates galvanic corrosion
The DELAVAN 0.85 70B Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type B-nozzles produce a spray that distributes droplets uniformly throughout the complete pattern. The spray pattern becomes progressively hollower at higher flow rates, particularly above 8.00 GPH. Provides smooth ignition and efficient combustion, particularly in larger burners. This boiler replacement part is compatible with an oil-burning appliance.
- Precise spray angles and optional spray uniformity through new machining process
- Reduced distributor size with shorter tangential slots to avoid plugging
- Aerodynamic body configuration
- Rolled threads to avoid metal chips and burrs
- Sintered filter for maximum protection
- Boiler replacement part is compatible with an oil-burning appliance
- ISO 9001 certified
The Taco 1-1/4 in. cast iron Freedom Flanges set includes: (2) flanges, (4) nuts, and (4) mounting bolts. These flanges are designed for use with Taco "00", "00e", "2400", and "100" series hydronic circulators. Easily installed and removed with a common wrench.
- For use in a hydronic heating system
- Compatible with a wide variety of Taco circulators
- 1-1/4 in. Dia connection size
- Unique hex design provides easy-on, easy-off installation with a standard adjustable wrench
Provide precise and accurate control of room temperature. Control temperature by modulating the flow of hot water or steam through free-standing radiators, convectors and other heating units with high capacity requirements. Continually monitor and adjust room temperature for consistent comfort.
- Designed with the higher capacity normally required by North American heating systems
- Valve seat disc, which is made of resilient material (EPDM)
- Nickel-plated bronze casted body with working parts in cartridge insert for ease of service
- All working parts are replaceable while valve remains in service, in-line, under pressure
- Valves normally open without control mounted
- Valves may be used with V110 valves
- Ensures tight shutoff on steam or hot water systems
- Meet ASHRAE standard 102-1989
- Includes sensor, set point dial and valve actuator
- Components may be integral or connected by capillary tubes
The DELAVAN 1.20 80A Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type A-nozzles are mainly used on burners with a hollow cone air pattern and for through puts up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion. This boiler replacement part is compatible with an oil-burning appliance.
- Precise spray angles and optional spray uniformity through new machining process
- Reduced distributor size with shorter tangential slots to avoid plugging
- Aerodynamic body configuration
- Rolled threads to avoid metal chips and burrs
- Sintered filter for maximum protection
- Boiler replacement part is compatible with an oil-burning appliance
- ISO 9001 certified