SharkBite Push-to-connect stop valves are the fastest way to connect to PEX, copper, CPVC, or PE-RT stubouts. These valves control the flow of water to plumbing fixtures including faucets, toilets, dishwashers, washing machines, and ice makers. Braided supply lines, PEX, or copper tubing can be used to connect the outlet of the valve to plumbing fixtures. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings and valves can be easily changed or reused Designed with stainless steel gripping teeth for a secure connection, chlorine-resistant O-ring for a long-lasting seal.

• Works on wet lines, rotatable after installation, and removable
• Push-to-connect fittings are ideal for installation in tight spaces
• Rated to 160 degrees Fahrenheit and 125 PSI
• Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
• Chrome-plated exterior body
• Low-lead DZR corrosion-resistant brass body
• Code approved, IAPMO listed, for details see Specifications
• 2-Year warranty when used with PEX, copper, CPVC & PE-RT pipe
• Meets all UPC, IPC and cUPC requirements
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
• 1/2 in. pipe insertion depth = 15/16 in.

1/2 in. Nom Compression Inlet x 3/8 in. O.D. Compression x 3/8 in. O.D. Compression Dual Outlet Multi-Turn Valve controls water flow to household plumbing fixtures. The dual outlet allows two independent supply lines to be attached to a single valve. Ideal for adding dishwashers, ice makers, water filters and instant hot water dispensers to existing water supply. With a few turns of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.

• Machined one-piece brass body provides strength, durability and long-lasting performance
• For use in potable water distribution systems; not intended for recirculating water systems that produce continuous use temperatures above 115 degree F; for those applications, use our KT series ball stops
• Multi-turn operation means water flow control with only a few turns of the handle
• Oval-knurled handle provides a secure grip for on/off operation
• Easy-to-remove handle protects against accidental operation during rough-ins
• 1-piece shut-off mechanism provides smooth on-off operation
• IAPMO ASME A112.18.1/CSA B125.1
• Designed, machined and assembled in the USA

1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Forged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shut-off and re-opening
• IAPMO and CSA listed
• Certified to ANSI/NSF standard 61-9 annex G
• Manufactured in an ISO accredited facility

1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Forged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shutoff and re-opening
• IAPMO and CSA Listed
• Certified to ANSI / NSF standard 61-9 Annex G
• Manufactured in an ISO accredited facility

The NIBCO lead-free, brass ball valve with solder end connections provides bubble-tight shutoff. The valve's PTFE seats and lead-free ball exhibit high corrosion resistance properties. The valve is ideal for hot/cold water applications.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• Full port
• Blowout-proof stem
• Female solder cup end connections
• CSA certified to ASME B16.44
• Valve pressure rating 600 psi/41.4 bar non-shock cold working pressure
• Standard lever handle
• "11/2 I.D. and 1.625 O.D."

SharkBite Push-to-connect stop valves are the fastest way to connect to PEX, copper, CPVC, or PE-RT stubouts. These valves control the flow of water to plumbing fixtures including faucets, toilets, dishwashers, washing machines, and ice makers. Braided supply lines, PEX, or copper tubing can be used to connect the outlet of the valve to plumbing fixtures. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings and valves can be easily changed or reused Designed with stainless steel gripping teeth for a secure connection, chlorine-resistant O-ring for a long-lasting seal.

• Works on wet lines, rotatable after installation, and removable
• Push-to-connect fittings are ideal for installation in tight spaces
• Rated to 160 degrees Fahrenheit and 125 PSI
• Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
• Chrome-plated exterior body
• Low-lead DZR corrosion-resistant brass body
• Code approved, IAPMO listed, for details see Specifications
• 2-Year warranty when used with PEX, copper, CPVC & PE-RT pipe
• Meets all UPC, IPC and cUPC requirements
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)

BrassCraft 1/2 In. Nom Compression Inlet x 1/4 In. OD Compression Outlet Multi-Turn Angle Valve controls water flow to household plumbing fixtures faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the wall. With a few turns of the valve handle, you are able to stop or start the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.

• Compatible with Copper or PEX (PEX installations require a stainless steel tube insert)
• Machined, one-piece body construction for strength, durability and long-lasting performance
• Easy-to-remove handle protects against accidental operation during rough-ins
• Easy-to-remove handle protects against accidental operation during rough-ins
• Multi-turn operation means water flow control with only a few turns of the handle
• Oval-knurled handle provides a secure grip for on/off operation
• Chrome-plated brass
• Temperature rating: 40 degree to 160 degree F
• Pressure rating: 125 psi maximum
• No-Lead Certified
• IAPMO and CSA listed to ASME A112.18.1 / CSA B125.1
• Designed, Machined and Assembled in the USA

SharkBite Push-to-connect ball valve is the easiest way to install a new or replacement shut-off ball valve. The single lever quarter-turn control allows for easy operation and the valve is perfect for potable water and hydronic applications where a shut-off is needed. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the valve after installation. Removing the valve is just as fast using a disconnect tool so the valve can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, a chlorine-resistant O-ring for a long-lasting seal, and backed by a 25-year warranty.

• Compatible with PEX, copper, CPVC, PE-RT, and HDPE pipe
• Push-to-connect fittings are ideal for installation in tight spaces
• Rated to 200 degrees Fahrenheit and 200 PSI
• Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground)
• Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
• Low-lead DZR corrosion-resistant brass body
• Code approved, IAPMO listed, for details see Specifications
• 25-Year warranty when used with PEX, copper, CPVC & PE-RT pipe
• 5-Year warranty when used with SDR-9 HDPE pipe
• Meets all UPC, IPC and cUPC requirements
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
• Rated to 200 degree F and 200 psi
• 1 in. Pipe Insertion Depth = 1-5/16 in.

The NIBCO lead-free brass ball valve with threaded end connections provides bubble-tight shutoff. The valve's PTFE seats and lead free ball exhibit high corrosion resistance properties. The valve is ideal for hot/cold water and gas applications. The NIBCO lead-free brass ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features threaded end connections for easy installation.

• Lead free
• Valve pressure rating 600 psi/41.4 bar non-shock cold working pressure
• Full port
• Blowout-proof stem
• IAPMO listed to NSF/ANSI-61-8, NSF/ANSI-372 and UPC-IGC-157
• CSA ANSI Z21.15 / CSA 9.1
• CSA ASME B16.44: 5 psig (maximum)
• CSA ASME B16.33: 125 psig (maximum)
• CSA CAN / CGA 3.16
• CSA CGA CR91-002: 1/2 psig, 2 psig and 5 psig (1/4 in. to 4 in. )
• FM 1140 approved 175 wwp
• UL 1477 (YQNZ): compressed gas shutoff valves 250 psi
• UL 842 (YRBX): flammable liquid shut off valves 250 psi
• UL 842 (YRPV): gas shutoff valves 250 psi
• UL subject 258 (VQGU): trim and drain valves

The NIBCO lead-free, brass ball valve with solder end connections includes a drain. The valve's PTFE seats and lead-free ball exhibit high corrosion resistance properties. The valve is ideal for hot/cold water applications. The NIBCO lead-free* brass ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The two-piece valve features solder end connections for easy installation. Please refer to NIBCO technical data sheet, valve selection guide and catalog for engineering and installation information. Choose NIBCO ball valves for the most specified, versatile and economical valve option in commercial and residential applications.

• NIBCO lead-free brass ball valve provides ease of operation with quarter-turn (90) open to close
• 2-piece valve features solder end connections for easy installation
• Full port
• PTFE seat
• Blowout-proof stem
• Drain port and cap
• Standard lever handle
• IAPMO listed to NSF/ANSI-61-8, NSF/ANSI-372 and UPC-IGC-157

The NIBCO lead-free brass ball valve provides ease of operation with quarter-turn (90 degree ) open to close. The 2-piece valve features threaded end connections for easy installation. Please refer to NIBCO technical data sheet, valve selection guide and catalog for engineering and installation information. Choose NIBCO ball valves for the most specified, versatile and economical valve option in commercial and residential applications. NIBCO specialty valves are backed by a NIBCO INC. 2-year limited warranty.

• 3/4 in. Inside Diameter and 0.875 in. Outside Diameter
• Valve pressure rating 600 psi/41.4 bar non-shock cold working pressure (1/4 in. to 2 in.)
• Valve pressure rating 400 psi/27.6 bar non-shock cold working pressure (2-1/2 in. to 4 in.)
• Full port
• Blowout-proof stem
• Threaded end connections
• Standard lever handle
• IAPMO listed to NSF/ANSI-61-8, NSF/ANSI-372 and UPC-IGC-157
• CSA ANSI Z21.15/CSA 9.1 (1/4 in. to 4 in.)
• CSA ASME B16.33: 125 psi (maximum) (1/4 in. to 4 in.)
• CSA CAN/CGA 3.16 (1/4 in. to 4 in. )
• CSA CGA CR91-002: 1/2 psi, 2 psi, and 5 psi (1/4 in. to 4 in.)
• UL 1477 (YQNZ): compressed gas shutoff valves - 250 psi (1/4 in. to 4 in.)
• UL 842 (YRBX): flammable liquid shutoff valves - 250 psi (1/4 in. to 4 in.)
• UL 842 (YRPV): gas shutoff valves - 250 psi (1/4 in. to 4 in.)
• UL 842 (MHKZ): manual valves - 250 psi (1/4 in. to 4 in.)
• UL 125 (YSDT): LP-gas shutoff valves - 250 psi (1/4 in. to 4 in.)

WARNING FOR CALIFORNIA RESIDENTS: This product contains chemicals known to the State of California to cause cancer and birth defects and other reproductive harm. www.p65warnings.ca.gov Brass ball valve 2-piece Full port Press X Press ends 200 PSIG @ 250 degree .

• Two Piece Full Port Brass Ball Valve
• Press x Press Ends
• 200 psig Non-Shock @ 250 Degrees F
• Blow-out Proof Stem
• For Potable Water Service
• Certified NSF/ANSI 61 and NSF/ANSI 372

Warning For California Residents: This product contains chemicals known to the State of California to cause cancer and birth defects and other reproductive harm. Brass ball valve, 2-piece design. Full port Press x Press ends 200 PSIG at 250 degree F Non-shock. To be used for potable water service.

• Brass ball valve
• For potable water service
• 2-piece design
• Full port
• Press x press ends
• Blow-out proof stem
• 200 PSIG at 250 degree F non-shock
• Certified NSF/ANSI 61 and NSF/ANSI 372

Mylar speaker for all Pacific style lobby panels.

• Ideal for use with all Pacific-style lobby panels
• Designed to provide 200 PSIG at 250 degree
• Free from lead for safe use
• 2-piece brass ball valve

BrassCraft 1/2 in. FIP Inlet x 3/8 in. OD Compression Outlet Multi-Turn Angle Valve With Brass Stem controls water flow to household plumbing fixtures faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the wall. With a few turns of the valve handle, you are able to stop or start the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.

• Easy-to-remove handle protects against accidental operation during rough-ins
• Compatible with iron pipe
• Machined, one-piece body construction for strength, durability and long-lasting performance
• Features brass stem
• Multi-turn operation means water flow control with only a few turns of the handle
• Oval-knurled handle provides a secure grip for ON/OFF operation
• Chrome-plated brass
• Temperature rating: 40 degree to 160 degree F
• Pressure rating: 125 psi maximum
• No-lead certified
• IAPMO and CSA listed to ASME A112.18.1 / CSA B125.1

BrassCraft Toilet Supply Kit everything you need to connect your water supply to your toilet. Components include: (1) 1/2 in. Nominal Sweat inlet x 3/8 in. O.D. Compression outlet multi-turn angle water shut-off valve with 5 in. Sweat Extension Tube (1) 3/8 in. O.D. x 12 in. L copper riser and (1) bell flange. An angle valve is most often used when the water pipe enters the room from the wall. 5 in. extension tube slides over existing 1/2 in. nominal copper water pipe, sweat connection. May be cut to required length using a tube cutter. All components are chrome-plated for a clean professional appearance.

• Kit includes: (1) 1/2 in. nominal sweat x 3/8 in. O.D. compression multi-turn angle valve with 5 in. extension tube, (1) 12 in. toilet riser and (1) bell escutcheon
• Valve compatible with 1/2 in. nominal (5/8 in. O.D.) copper pipe
• 5 in. extension tube slides over existing 1/2 in. nominal copper pipe, sweat connection, may be cut to required length
• Valve has a machined, 1-piece brass body for strength, durability and long-lasting performance
• Valve controls water flow with a few turns of the handle
• 3/8 in. O.D. x 12 in. riser features standard gasket nosepiece
• Riser is cut-to-length for flexible fit and clean, professional appearance
• Chrome finish
• For use in potable water distribution systems in accessible locations only
• Temperature rating: 40 degree F to 140 degree F
• Pressure rating: 125 psi maximum
• No-lead certified
• IAPMO and CSA listed to ASME A112.18.1/CSA B125.1

The NIBCO lead-free, brass ball valve with solder end connections provides bubble-tight shutoff. The valve's PTFE seats and lead-free ball exhibit high corrosion resistance properties. The valve is ideal for hot/cold water applications.

• Lead free
• Full port
• Blowout-proof stem
• Standard lever handle
• Female solder cup end connections
• IAPMO listed to NSF/ANSI-61-8, NSF/ANSI-372
• Valve pressure rating 600 psi/41.4 in. bar non-shock cold working pressure (3/8 in. to 2 in.)

SharkBite Push-to-connect ball valve is the easiest way to install a new or replacement shut-off ball valve. The single lever quarter-turn control allows for easy operation and the valve is perfect for potable water and hydronic applications where a shut-off is needed. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the valve after installation. Removing the valve is just as fast using a disconnect tool so the valve can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, a chlorine-resistant O-ring for a long-lasting seal, and backed by a 25-year warranty.

• Compatible with PEX, copper, CPVC, PE-RT, and HDPE pipe
• Push-to-connect fittings are ideal for installation in tight spaces
• Rated to 200 degrees Fahrenheit and 200 PSI
• Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground)
• Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
• Low-lead DZR corrosion-resistant brass body
• Code approved, IAPMO listed, for details see Specifications
• 25-Year warranty when used with PEX, copper, CPVC & PE-RT pipe
• 5-Year warranty when used with SDR-9 HDPE pipe
• Meets all UPC, IPC and cUPC requirements
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
• Rated to 200 degree F and 200 psi
• 1/2 in Pipe Insertion Depth = 15/16 in.

1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Forged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shut-off and re-opening
• IAPMO and CSA listed
• Certified to ANSI/NSF standard 61-9 annex G
• Manufactured in an ISO accredited facility

BrassCraft 1/2 In. Nom Sweat x 3/8 In. OD Compression Outlet Multi-Turn Angle Valve controls water flow to household plumbing fixtures faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the wall. With a few turns of the valve handle, you are able to stop or start the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.

• Compatible with Copper
• Machined, one-piece body construction for strength, durability and long-lasting performance
• Easy-to-remove handle protects against accidental operation during rough-ins
• Easy-to-remove handle protects against accidental operation during rough-ins
• Multi-turn operation means water flow control with only a few turns of the handle
• Oval-knurled handle provides a secure grip for on/off operation
• Rough brass
• Temperature rating: 40 to 140 F
• Pressure rating: 125 psi maximum
• No-Lead Certified
• IAPMO and CSA listed to ASME A112.18.1 / CSA B125.1
• Designed, Machined and Assembled in the USA

The NIBCO lead-free brass ball valve with threaded end connections provides bubble-tight shutoff. The valve's PTFE seats and lead free ball exhibit high corrosion resistance properties. The valve is ideal for hot/cold water and gas applications. The NIBCO lead-free brass ball valve provides ease of operation with quarter-turn (90) open to close. The 2-piece valve features threaded end conn.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• Lead free, full port
• Valve pressure rating 600 psi/41.4 bar non-shock cold working pressure
• Blowout-proof stem
• UL subject 258 (VQGU): trim and drain valves
• CSA ANSI Z21.15 / CSA 9.1
• IAPMO listed to NSF/ANSI-61-8, NSF/ANSI-372 and UPC-IGC-157
• CSA ASME B16.44: 5 psig (maximum)
• CSA ASME B16.33: 125 psig (maximum)
• CSA CAN / CGA 3.16 (1/4 in. to 4 in.)
• CSA CGA CR91-002: 1/2 psig, 2 psig, and 5 psig
• FM 1140 approved 175 wwp
• UL 1477 (YQNZ): compressed gas shutoff valves 250 psi
• UL 842 (YRBX): flammable liquid shutoff valves 250 psi
• UL 842 (YRPV): gas shutoff valves 250 psi
• UL 842 (MHKZ): manual valves 250 psi
• UL 125 (YSDT): LP-gas shutoff valves 250 psi

BrassCraft 1/2 In. Nom Compression Inlet x 3/8 In. OD Compression Outlet 1/4-Turn Angle Ball Valve features lockshield and a loose key to help prevent tampering and accidental activation of water flow. Used to control water flow to household plumbing fixtures, this angle valve is most often used where the water pipe enters the room from the wall. With a quarter turn of the loose key, you are able to start or stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.

• Contractor pack includes 5 individually trayed valves
• Compatible with Copper or PEX (PEX installations require a stainless steel tube insert)
• Smooth, quarter-turn operation. On/Off flow control with a 90 degree turn of the loose key handle
• Brass ball ensures smooth operation without freeze-ups even after long periods without use
• Machined body provides strength, durability and long-lasting performance
• Lockshield and Loose key help protect against tampering and accidental activation
• Chrome-plated brass
• Temperature rating: 40 to 140 F
• Pressure rating: 125 psi maximum
• No-Lead Certified
• IAPMO and CSA listed to ASME A112.18.1 / CSA B125.1
• Designed, Machined and Assembled in the USA

The NIBCO lead-free brass ball valve with threaded end connections provides bubble-tight shutoff. The valve's PTFE seats and lead free ball exhibit high corrosion resistance properties. The valve is ideal for hot/cold water and gas applications.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• NIBCO lead-free brass ball valve provides ease of operation with quarter-turn (90 degree ) open to close
• Full port design, blowout-proof stem
• CSA ANSI Z21.15 / CSA 9.1
• IAPMO listed to NSF/ANSI-61-8, NSF/ANSI-372 and UPC-IGC-157
• CSA ASME B16.33: 125 psig (maximum)
• CSA ASME B16.44: 5 psig (maximum)
• CSA CAN/CGA 3.16
• CSA CGA CR91-002: 1/2 psig, 2 psig, and 5 psig
• FM 1140 approved 175 WWP
• UL 1477 (YQNZ): compressed gas shutoff valves 250 psi
• UL 842 (YRBX): flammable liquid shut-off valves 250 psi
• UL 842 (YRPV): gas shutoff valves 250 psi
• UL 842 (MHKZ): manual valves 250 psi
• UL 125 (YSDT): LP-gas shutoff valves 250 psi
• UL subject 258 (VQGU): trim and drain valves

WARNING FOR CALIFORNIA RESIDENTS: This product contains chemicals known to the State of California to cause cancer and birth defects and other reproductive harm www.p65warnings.ca.gov Brass ball valve 2-piece Full port Press X Press Ends 200 PSIG @ 250 degree .

• Two Piece Full Port Brass Ball Valve
• Press x Press Ends
• 200 psig Non-Shock @ 250 Degrees F
• Blow-Out Proof Stem
• For Potable Water Service
• Certified NSF/ANSI 61 and NSF/ANSI 372