Pressure switches are used to control electrically driven water pumps, suitable for all types of pumps; jets, submersible, reciprocating, etc. Pressure switches are needed for rural water systems that rely on well to supply their water. Water is pumped from the well or other water source to the pressure tank and as the tank fills the air in the tank becomes pressurized. When the pre-set pressure is reached, the pressure switch contacts open to stop the pump. When water is used, the pressure in the pressure tank fall and as it reached the pre-set cut in pressure of the switch the contacts close, starting the cycle over. These pressure switches are easily adjusted by following instruction inside the switch cover.

• Standard duty
• NEMA type 1 indoor enclosure
• 2 pole, rated 1-1/2 HP at 115 Vac, 2HP at 230 VAC
• Pressure Connection: 1/4 in. NPSF, pressure setting 30-50
• Adjustable cut in/out: cut out range 20-65 psig

No float, no problems. ClearVues iQ Technology and Floatless Sensor make this the most advanced condensate pump ever. ClearVue runs at the minimum speed needed, saving wear on the pump. Its unique self-cleaning feature senses problems and automatically enters a self-cleaning mode using condensate water to fix the issue. The ClearVue pump features a clear bottom tank to easily check the water level.

• ClearVue float less sensor eliminates the problems associated with conventional condensate pumps such as debris fouling, sunken floats, and misalignment, no float, no problem
• ClearVue senses how fast the condensate is entering the tank and adjusts to the lowest effective speed, making it quieter than a regular pump while also keeping the tank clear
• Unique self-cleaning feature senses problems and automatically enters a self-cleaning mode using condensate water to fix the issue
• ClearVue pump features a clear bottom tank to easily check the water level
• ClearVue pump can provide up to 22 ft. of lift if needed and runs at the minimum speed needed, saving wear and tear
• ClearVue includes specially designed rubber feet that dampen vibration and noise making ClearVue quiet and easy to live with

The VCMA-15UL is ideal for automatic collection and removal of condensate from air conditioning, refrigeration and de-humidification equipment when gravity drainage is not possible or practical. Also suitable for high efficiency oil and gas-fired condensing furnace and condensing boiler equipment. This units includes a 6 ft. cord as well as a .5 Gal. reservoir.

• 1/50 hp high-performance motor pumps 65 Gal. of water per hour
• ABS tank, motor cover and volute
• Stainless steel motor shaft
• 1/2 Gal. collection tank

Featuring super quiet operation, specifically designed for ductless system installations, and including iQ Technology and Floatless Sensor, ClearVue Mini is chock full of innovative features, and priced competitively. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.

• Clear tank feature of ClearVue Mini allows the user to see the activities inside allowing for faster and accurate troubleshooting
• ClearVue mini's floatless sensor eliminates the problems associated with conventional condensate pumps - no float, no problem
• ClearVue mini is compact and fits almost anywhere including inside a line set cover, the ceiling, behind a wall or in some cases inside the wall cassette unit
• ClearVue mini determines how fast condensate is entering the tank and adjusts its speed and lift to match the conditions and keep the tank clear
• Shuts down the compressor in case of a clogged line, preventing damage to equipment or environment
• ClearVue mini is nearly inaudible, the sound rating is significantly less than 20 dB, this quiet operation allows for maximum installation flexibility

Avoid excess condensation from your HVAC equipment with Little Giant's VCMA-20ULS condensate pump. Used to move and direct the flow of condensation produced by boilers, furnaces, air conditioning systems and hydroponic systems, the VCMA-20 condensate pump is ideal when gravity drainage is not possible or practical. Its state-of-the-art design features a vertical-type pump unit to fit in tight spaces requiring a smaller footprint.

• 1/30 hp high-performance motor
• ABS tank, motor cover and volute
• Stainless steel motor shaft
• 1/2 Gal. tank capacity
• Safety switch included

Assurity CP Series 120V Low Profile Condensate Pump with 22 ft. Lift

• The Reservoir Holds 1/3 Gallon Of Condensate
• LED indicators confirm pump status
• 22 ft maximum lift height
• Suitable for condensate up to 160degree F
• Removable Reservoir for EA-Eachsy Maintenance and Built-in Safety Overflow Switch
• Vibration dampening feet and motor mounts minimize sound
• Includes removable check valve and reversible deck for more installation options
• 4 inlet holes
• Mfg #CP-22LP
• The Reservoir Holds 1/3 Gallon Of Condensate
• LED indicators confirm pump status
• 22 ft maximum lift height
• Suitable for condensate up to 160degree F

LITTLE GIANT Condensate Pump. Suitable For High-Efficiency, Gas Furnace Condensate. Pump Is Rated At 80 GPH. Shut-Off is 20 ft. Discharge Is 3/8 in. O.D. Barbed. Includes A Secondary Safety Switch. 115-Volt. 6 ft. Power Cord.

• Low profile for limited spaces
• Vertical centrifugal pump design
• Stainless steel motor shaft
• Automatic start stop and high level water detection (overflow detection switch)

A Reliance Pump Tank is a must for any home that uses a pump to draw water from a well. We utilize a parabolic (cone-shaped) diaphragm that eliminates rubbing against itself or the tank wall, causing premature failure. A properly sized pump and pump tank will work as a team to meet your needs and deliver many years of dependable service.

• It ensures that your pump will run for at least one minute each time it cycles, as required by pump manufacturers
• It stores a supplemental water supply between pump cycles, to reduce the number of cycles throughout the day, and helps prolong pump life
• It helps maintain water pressure within your system, ensuring proper operation of your dishwasher and washing machine, and robust flow for showering and bathing
• Strong, flexible butyl diaphragm, powder-coated inner shell for permanent separation of air and water

7-12B is for use with air conditioning and refrigeration condensate drains, condensate pump discharge lines and humidifier overflow drain lines. This braided tubing is designed to be kink resistant, lightweight and flexible. It will withstand rough handling and heavy usage while maintaining dimensional stability. Made of high quality materials with smooth interior and exterior that prevents sediment accumulation, allows easy flow. The tubing is easy to shape, bend and install.

• Clear Vinyl Chloride (PVC)
• Reinforced polyester caliber 300-500
• Extra rigid design resists crimping and kinking due to durometer value of 78-80 (shore A)
• Service temperature 140degree F. (60degree C.)
• Durometer: Shore 78-80A

The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.

• High quality
• Reliability
• Durable construction
• Easy to install

The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.

• High quality
• Reliable performance
• Durability
• Easy to install

7-34B is for use with air conditioning and refrigeration condensate drains, condensate pump discharge lines and humidifier overflow drain lines. This braided tubing is designed to be kink resistant, lightweight and flexible. It will withstand rough handling and heavy usage while maintaining dimensional stability. Made of high quality materials with smooth interior and exterior that prevents sediment accumulation, allows easy flow. The tubing is easy to shape, bend and install.

• Clear Vinyl Chloride (PVC)
• Reinforced polyester caliber 300-500
• Extra rigid design resists crimping and kinking due to durometer value of 78-80 (shore A)
• Service temperature 140degree F. (60degree C.)
• Durometer: Shore 78-80A

Pro Series Pumps High Water Alarm is designed to minimize the risk of water damage by acting as an early warning system. For over two decades the Pro Series Pumps High Water Alarm has been protecting from unwanted water damage. It can be placed next to a water heater, beneath a laundry tub, under a sink, behind a refrigerator, next to the air conditioner, anywhere where water or moisture can collect. All it takes is 1/32 in. of water to sound a loud 110 dB alarm, detecting water before mold can grow, or alerting you to potential flood conditions. It includes 6 ft of wire for extending the sensor too hard to reach locations. You can even increase the wire length up to 100 ft. The built in accessory jack allows for additional sensors or a high-water float.

• Battery operated alarm can detect as little as 1/32 in. of water
• Produces a loud 110 dB alarm that can be heard throughout the house to provide an effective early warning system
• Use in a variety of locations: in a sump pit, near water heaters, refrigerators or dishwashers, next to washing machines, under sinks, close to air conditioner drain tubes or wherever there is a risk of water damage
• Sensor wire extends 6 ft. and can be lengthened for hard to reach areas, accommodates the addition of more than 100 ft. of wire (additional 24-Gauge wire not included)
• Built in accessory jack allows for an additional 360 degree water sensor PS-WS360 or a high water float PS-WS (Item 3570418)
• Battery-saver feature only uses energy when the alarm is sounding to offer a long battery life
• Requires 9-Volt battery (not included)
• 5 Year limited warranty

The 6 Qt. Battery Acid pack (Z-Pack) is designed for use with Basement Watchdog 30HDC140S and 24EP6 Standby Batteries. The flexible pour spout helps easily activate the standby batteries. Basement Watchdog batteries are shipped dry (without acid) so they will never lose power before you take them home. By adding the acid just before use, the battery will always be fresh.

• Activates basement watchdog standby batteries
• Flexible pour spout
• 6 qt. included
• 1 package of battery fluid required per basement watchdog battery

Utility water test gauge. This gauge is used for pressure tests of residential and commercial water lines. This gauge has a 300 psi scale and a 3/4 in. female swivel connection for water lines.

• 3/4 in. female copper alloy swivel connection for water lines
• Top mounted to make it easy to read when connected
• Accuracy 3-2-3% of span, ASME B40.1 grade B
• 2-1/2 in. dial and 300 psi standard

A full featured pump suitable for use with condensate from high efficiency condensing furnaces and boilers which produce acidic condensate. It has 22 ft. of lift compared to the typical 20 ft. Features include vibration dampening feet and motor mounts, metal hang tabs, 4-inlet holes, a clear indicator display, a float switch and check valve.

• Elastomeric motor mounting gasket dampens vibration
• Red, yellow, and green indicator lights show the pump status; the green shows the power applied to the pump, yellow shows the pump is running, and red is for high level alarm
• Rubber feet that support the pump help to dampen vibration which reduces noise
• 4-inlet versus 2 or 3 on other pumps provide the greatest installation versatility, inlet holes have a reinforced wall for durability
• Features a removable check valve which allows for hassle free cleaning
• 1/4 in. quick connect terminals provide easy connection to the built-in overflow switch
• 2-terminals are provided allowing the installer flexibility to connect the air handler shut-down
• Switch features SPDT isolated contacts ready for connection to building automation systems
• Pump comes equipped with shatterproof stainless steel hang tabs which have hole-and-slot design for easy mounting
• Tabs are located on convenient 8 in. centers

For use in evaporative coolers. Ideal as universal replacement pump. For coolers up to 7,000 CFM Universal mounting Blue styrene body, corrosion-proof Thermal overload protection 90 degree barbed elbow with bleed-off port 4 ft. power cord with 3-prong plug Moisture-proof windings 115-Volt, heavy-duty, fan-cooled motor 307 GPH at 1 ft. UL component recognized Mesh debris screen Snap-on hose adapter.

• High quality concentric fan-cooled double coil motor
• Universal mounting configurations
• Low pump down and recovery level
• Optional 90 degree elbow with bleed off port included

Pump A Way is a durable and efficient hand pump for numerous applications inside and outside the home. The pump is manufactured of high quality impact and chemical resistant materials. Use for your entire pump project around the house. The Pump A Way is easy to use with each stroke pumping a whopping 32 oz. of liquid.

• Pump is manufactured of high quality impact and chemical resistant materials
• Some projects include removing waters from washing machines, dishwashers, sinks, showers, tubs, basins, valve boxes, condensation or drip pans, and sumps
• Pump removes a Gal. of liquid per 4 strokes
• Pump will not rust or corrode; pump is made of durable PVC
• Not made with NSF-14 (food grade) materials and is not recommended for food-based liquids

A Reliance Pump Tank is a must for any home that uses a pump to draw water from a well. We utilize a parabolic (cone-shaped) diaphragm that eliminates rubbing against itself or the tank wall, causing premature failure. A properly sized pump and pump tank will work as a team to meet your needs and deliver many years of dependable service.

• It ensures that your pump will run for at least one minute each time it cycles, as required by pump manufacturers
• It stores a supplemental water supply between pump cycles, to reduce the number of cycles throughout the day, and helps prolong pump life
• It helps maintain water pressure within your system, ensuring proper operation of your dishwasher and washing machine, and robust flow for showering and bathing
• Strong, flexible butyl diaphragm, powder-coated inner shell for permanent separation of air and water

Heavy Duty Plated Bronze Volute For Durability. Convenient Transfer Pump For Household Use. Portable and Lightweight. Removes Water Down To 1/8 in. with Water Suction Attachment (Included). 115-Volt, 350 GPH.

• Non-submersible, multi-purpose pump is designed for emergency dewatering, draining aquariums, waterbeds and clogged sinks
• Pumps down to 1/8 in. when using the pud-l-scoop suction attachment that is included
• Self-priming at 6 ft. vertically, pump will push water 40 ft. high
• 3/4 in. GHT inlet and discharge
• Includes 6 ft. power cord, 6 ft. garden hose and pud-l-scoop suction attachment

Holds prime for jet well pumps and irrigation pumps. Heavy perforated solid brass strainer. Features include perforated steel screen strainer, poppet with Buna-N O-ring, stem guide and wide channel for maximum flow.

• Spring loaded
• 2 years warranty against defect
• Used with jet pumps
• Female NPT threads

Utility gauge for commercial and industrial markets. Black steel case, chrome bezel, copper alloy internals. This gauge has a 2 dial, 1/4 NPT, 100 psi/bar scale.

• 2 in. dial 1/4 NPT
• Accuracy 3-2-3% of span, ASME B40.1 grade B
• 100 psi/bar scale with no logo
• Black steel case with brass wetted parts

Pro Series Pumps Clenit Cleans Iron Ochre Sludge Dirt Sump Pumps-Pits An Easy-To-Use, Price-Conscious Solution For Iron Ochre Management Cleanses your entire sump system of iron ochre, the red slime/sludge buildup Helps maintain a healthy pump and sump system Great for routine sump system maintenance and sump pit cleaning Mfg #CL7

• An Easy-To-Use, Price-Conscious Solution For Iron Ochre Management
• Cleanses your entire sump system of iron ochre, the red slime/sludge buildup
• Helps maintain a healthy pump and sump system
• Great for routine sump system maintenance and sump pit cleaning

This air valve provides a method of injecting and holding air pressure in water systems. It is used for shallow and deep well pump systems. Other uses include pressurizing piping systems for pressure test and blowing out irrigation lines.

• 1/8 in. MPT for water pumps
• Working pressure 15-150 PSI
• Working temperature: -10 degree F to + 165 degree F
• Opening pressure 3 psi
• Manufactured with light spring required for shallow well pump and bleeder systems