The VCMA-15ULS has 1/2 Gal. tank capacity. Little Giant VCMA Series is ideal for collecting, detecting and the automatic removal of condensate from air conditioning equipment, de-humidifiers, high efficiency furnaces, condensing boilers and other equipment where an automatic drain pump is required. Also suitable for high efficiency oil and gas-fired condensing furnace and condensing boiler equipment.

• 1/50 HP high performance motor
• ABS tank, motor cover and volute
• Stainless steel pump shaft
• Snap-action pump switch
• Removable 3/8 in. barbed check valve
• Safety switch included

Avoid excess condensation from your HVAC equipment with Little Giant's VCMA-20ULS condensate pump. Used to move and direct the flow of condensation produced by boilers, furnaces, air conditioning systems and hydroponic systems, the VCMA-20 condensate pump is ideal when gravity drainage is not possible or practical. Its state-of-the-art design features a vertical-type pump unit to fit in tight spaces requiring a smaller footprint.

• 1/30 hp high-performance motor
• ABS tank, motor cover and volute
• Stainless steel motor shaft
• 1/2 Gal. tank capacity
• Safety switch included

Removes Waste Water From Laundry Trays, Wet Bars, Sinks, Dehumidifiers and Other Applications Not Containing Large Quantities Of Solids. Includes 10 ft. Power Cord. Includes Cast Iron 1/3 HP Sump Pump #MS33PV1. Motor oil-filled for maximum heat dissipation and constant lubrication. Thermal overload protection with automatic reset. Fully assembled. Includes discharge pipe inside basin. Installs above floor.

• High-impact engineered resin, exterior hardware and stainless steel construction
• Piggyback-style float for automatic or manual operation
• Octagonal shape, compact size, 6 Gal. usable capacity
• Basin dimensions are 15-1/26 in. W x 13-3/4 in. H (11-9/16 in. from floor to center of inlet)

The Zoeller Tri-Check is a combination PVC check valve and ball valve for use with 2 in. discharge piping. It has a Glue x Glue Union Connection for easy installation. It has a full flow design for maximum performance.

• Full flow design
• Glue x Glue union connection
• Vertical or horizontal installation
• Includes ball valve for code requirements

Zoeller M267, 1/2 HP Submersible Sewage, Effluent, Dewatering Pump. Automatic Switch, 115-Volt, with 10 ft. Cord. 2 in. Discharge and passes 2 in. Solid.

• Passes 2 in. spherical solid
• All cast iron construction
• Non-clogging vortex impeller
• Heavy duty split phase motor

The Zoeller 10-4012 High Level alarm is for use in sump and sewage applications. It uses 115-Volt AC power and also has battery back up power using (2) AA batteries. It comes with a tethered float switch.

• 115-Volt AC power
• Battery back up power using AA batteries
• For use in sump or sewage applications
• Tethered float switch included

Pro Series Standby Sump Pump Batteries are the best batteries for your backup sump pump because they are designed around the system. They are uniquely constructed with heavy duty plates to store more energy, provide longer run times and last longer in standby operation. The Pro Series B12-100 will provide years of dependable service without the hassle of having to add battery fluid or distilled water. The Pro Series B12-100 battery is compatible with all current Pro Series Pumps' backup and combination sump pump systems. The high storage capacity of the B12-100 battery can run any of the current Pro Series battery backup or combination sump pump systems intermittently for days.

• Maintenance free - no need to add battery fluid or distilled water
• Runs the pump longer for more hours per charge, intermittently for days and lasts longer in standby operation
• Compatible with all new Pro Series Pumps backup and combination sump pump systems
• Up to 55 hours of protection (based on a 10% duty cycle) on the PS-C33 combination and PHCC-2400 battery backup sump pump system
• Up to 70 hours of protection (based on a 10% duty cycle) on the PS-C22 combination and PHCC-1850 battery backup sump pump system
• Up to 110 hours of protection (based on a 10% duty cycle) on the PS-C11 combination and PHCC-1000 battery backup sump pump system
• Internally threaded terminals for easy installation
• Compatible with PS-C33 Item # 110613; PHCC-2400 Item # 110610; PS-C22 Item # 110612; PHCC-1850 Item # 110609;

Utility gauge for commercial and industrial markets. Black steel case, chrome bezel, copper alloy internals. 2 in. dial with 1/4 NPT, dry only case.

• 2 in. dial size with standard 1/4 NPT
• Black steel case with brass wetted parts
• Glass lens
• Accuracy 3-2-3% of span, ASME B40.1 grade B

The Pumptrol FSG2J21BP electromechanical pressure switch by Square D is the most trusted brand in residential, commercial and industrial pumping applications. The FSG2J21BP has a 30 psi to 50 psi pressure setting range activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached. The NEMA 1 enclosure has a 1/4 in. NPSF internal fluid connection and screw clamp terminals. The switch works with a 1.5 HP or less pump. The adjustable differential range is 15 psi to 30 psi and the cut-out range is 20 psi to 65 psi. The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratory (UL) Listed and Canadian Standards Association (CSA) Certified. For over 75 years, Square D pressure switches continue to meet the needs of our customers. Square D Pumptrol pressure switches are manufactured by Schneider Electric.The Square D by Schneider Electric Pressure Switch is compatible with jet pumps, submersible pumps and reciprocating pumps. The standard action contacts open on rising pressure.

• Suitable for jet pumps, submersible pumps and reciprocating pumps
• Standard-action contacts open on rising pressure
• 30 - 50 PSI
• 1/4 in. pressure connection
• Standard action contacts open on rising pressure

The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.

• High quality
• Reliable performance
• Durability
• Easy to install

Utility gauge for commercial and industrial markets. Black steel case with brass internals. This pressure gauge has a 300 psi/bar scale with a 2 in. dial and 1/4 NPT connection.

• 2 in. dial 1/4 NPT
• Accuracy 3-2-3% of span, ASME B40.1 grade B
• 300 psi/bar scale no logo
• Black steel case, chrome bezel, copper alloy internals

The Zoeller 803-0001 1/2 HP Grinder pump is for sewage applications and grinds solids rather than passing them through. It has a Tri-Slice cutter for dependable operation. It operates on 115-Volt power and has an 1-1/4 in. discharge.

• Grinder pump grinds solids
• Integral float switch for automatic operation
• 1/2 HP, 7 Amp motor
• Cast iron construction

The Pumptrol FSG2J21M4CP electromechanical pressure switch by Square D is the most trusted brand in residential, commercial and industrial pumping applications. This switch has a 30 psi to 50 psi pressure setting range activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached. The NEMA 1 enclosure has a 1/4 in. NPSF internal fluid connection and screw clamp terminals. The switch works with a 1.5 HP or less pump. The adjustable differential range is 15 psi to 30 psi and the cut-out range is 20 psi to 65 psi. The low-pressure cut-off (auto-start-off) operates at approximately 10 psig below the cut-in and will turn off the pump. The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratory (UL) Listed and Canadian Standards Association (CSA) Certified. For over 75 years, Square D pressure switches continue to meet the needs of our customers. Square D Pumptrol pressure switches are manufactured by Schneider Electric.

• If system pressure is lost for any reason, a low water condition for example, the automatic lower pressure/water cut-off feature will open the contacts, turning off the pump
• Universally accepted and recognized design is easy to wire, features drift proof cut-in and cut-out settings and has visible vertical contacts which are easy to inspect
• Switch is UL listed and Canadian Standards Association (CSA) certified
• Activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached
• Pressure switch is RoHS compliant, NSF certified to meet federal low lead requirements

The VCMA-15UL is ideal for automatic collection and removal of condensate from air conditioning, refrigeration and de-humidification equipment when gravity drainage is not possible or practical. Also suitable for high efficiency oil and gas-fired condensing furnace and condensing boiler equipment. This units includes a 6 ft. cord as well as a .5 Gal. reservoir.

• 1/50 hp high-performance motor pumps 65 Gal. of water per hour
• ABS tank, motor cover and volute
• Stainless steel motor shaft
• 1/2 Gal. collection tank

Utility gauge for commercial and industrial markets. Black steel case, chrome bezel, copper alloy internals. 2 1/2 dial with 1/4 npt, dry only case.

• 2 1/2" dial size with standard 1/4 npt
• Black steel case with brass wetted parts
• Plastic lens
• Accuracy 3-2-3% of span, ASME B40.1 Grade B

7-12B is for use with air conditioning and refrigeration condensate drains, condensate pump discharge lines and humidifier overflow drain lines. This braided tubing is designed to be kink resistant, lightweight and flexible. It will withstand rough handling and heavy usage while maintaining dimensional stability. Made of high quality materials with smooth interior and exterior that prevents sediment accumulation, allows easy flow. The tubing is easy to shape, bend and install.

• Clear Vinyl Chloride (PVC)
• Reinforced polyester caliber 300-500
• Extra rigid design resists crimping and kinking due to durometer value of 78-80 (shore A)
• Service temperature 140degree F. (60degree C.)
• Durometer: Shore 78-80A

7-38P is for use with air conditioning and refrigeration condensate drains, condensate pump discharge lines and humidifier overflow drain lines. This braided tubing is designed to be kink resistant, lightweight and flexible. It will withstand rough handling and heavy usage while maintaining dimensional stability. Made of high quality materials with smooth interior and exterior that prevents sediment accumulation, allows easy flow. The tubing is easy to shape, bend and install.

• Clear Vinyl Chloride (PVC)
• Reinforced polyester caliber 300-500
• Extra rigid design resists crimping and kinking due to durometer value of 78-80 (shore A)
• Service temperature 140degree F. (60degree C.)
• Durometer: Shore 78-80A

Detectable 5 mil Underground Marking Tape, 3" x 1000' GAS

• Aluminum foil alerts about buried installation below
• Designed to identify, protect, and locate buried lines
• Black letters and colored background for clear visibility
• Designed for open trench applications

Pressure switches are used to control electrically driven water pumps, suitable for all types of pumps; jets, submersible, reciprocating, etc. Pressure switches are needed for rural water systems that rely on well to supply their water. Water is pumped from the well or other water source to the pressure tank and as the tank fills the air in the tank becomes pressurized. When the pre-set pressure is reached, the pressure switch contacts open to stop the pump. When water is used, the pressure in the pressure tank fall and as it reached the pre-set cut in pressure of the switch the contacts close, starting the cycle over. These pressure switches are easily adjusted by following instruction inside the switch cover.

• Standard duty
• NEMA type 1 indoor enclosure
• 2 pole, rated 1-1/2 HP at 115 Vac, 2HP at 230 VAC
• Pressure Connection: 1/4 in. NPSF, pressure setting 30-50
• Adjustable cut in/out: cut out range 20-65 psig

The Pro Series Vertical Switch Controller is one in a line of many Pro Series float switches available for sump, sewage and effluent applications. The Pro Series lineup gives customers more options to best fit their needs by having a Good, Better, Best philosophy. The mid-level Pro Series Enhanced Vertical Switch Controller (VSC1.5) is designed for reliability and flexibility. It has a large float that rests vertically on a rod with minimal movement and sealed gold contacts for reliable high cycle operation. The vertical switch simply mounts to the discharge pipe at the activation height of your choosing with the included stainless steel hose clamp. The VSC1.52 is a piggy-back switch making compatible with most sump, sewage and effluent pumps. For easy installation the float switch can be unplugged from the controller, the run time is adjustable (after the float drops), and the controller has universal mounting tabs. For enhanced user facets, the VSC1.5 exercises the pump weekly to extend pump life and has a system operating light to display that the control box is operating properly. If you want a switch that is dependable and has the flexibility to deal with the unique circumstances in your pit, you have found it, The VSC1.5.

• Can be used in sump, sewage and effluent applications
• Mechanical float on rod
• Exercises the pump weekly to extend pump life
• System operating light
• Adjustable run time (after the float drops) from 5-45 seconds
• Adjustable to any activation height using included stainless steel hose clamp
• Float switch can be unplugged from controller for easy installation
• Minimal movement and sealed gold contacts for reliable high cycle operation
• Piggyback plug
• Easy installation
• Warranty matches the pro series pump it is purchased with, otherwise a 1 year warranty applies

This air valve provides a method of injecting and holding air pressure in water systems. It is used for shallow and deep well pump systems. Other uses include pressurizing piping systems for pressure test and blowing out irrigation lines.

• 1/8 in. MPT for water pumps
• Working pressure 15-150 PSI
• Working temperature: -10 degree F to + 165 degree F
• Opening pressure 3 psi
• Manufactured with light spring required for shallow well pump and bleeder systems

Leonard Control Rod Group Pam-11 Pv-Cr

• Bronze build provides durability
• Ideal for repairing PAM-II-ST old style thermostatic valve
• Resists corrosion to ensure safety and reliability
• Restores system to efficient performance

With no monthly or yearly fees, the Pro Series Pumps WiFi Module sends e-mail, text and status alerts to your phone, tablet or computer to alert you to potential problems or required maintenance. The Wifi Module easily connects to compatible Pro Series systems using the data port or dry contacts. Sends e-mail, text and status alerts to your phone, tablet or computer. No monthly or yearly fees or subscriptions

• Easily connect to compatible Pro Series systems using the data port or dry contacts.
• USB data port allows you to receive text or email alerts telling you exactly what is going on with your sump pump system using your home Wi-Fi signal or automation hub
• Remote notification terminal allows you to receive general alerts while away from home; the remote terminal allows for one of many external devices to be connected including a home security system, auto dialer or other dry contact based device
• Pro Series Pumps Wi-Fi module give you the flexibility not found with other brands
• Free Apple and Android App available
• No monthly fee

The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.

• High quaility
• Reliability
• Durability
• Easy to install