The EU2C by Lithonia Lighting is a dual lamp head LED emergency light. Certified Title 20 for small battery charger systems, the EU2C provides emergency lighting while saving energy. It is ideal for lighting the path-of-egress in applications such as stairways, hallways and other small spaces at lower mounting heights.

• APPLICATIONS: Ideal for small commercial indoor applications requiring match existing equipment for mounting heights up to 10'
• RATINGS: UL damp location listed standard at 50-104 degrees F (10-40C), meets or exceeds all applicable requirements for Life Safety Code and state specific requirements
• VOLTAGE: Functions from 120-277 volts (50/60 Hz) with input wattage of 2 watts
• RATINGS: UL damp location listed standard at 50-104 degrees F, meets or exceeds all applicable requirements for Life Safety Code and state specific requirements
• VOLTAGE: Functions between 120 and 277V with input wattage of 2 watts
• HOURS OF LIFE: The typical life of the LED lamp is 10 years using two 1 Watt LED lamps for emergency light
• DESIGN: Injection-molded, flame-retardant, high-impact, thermoplastic housing with snap-fit design components with LED lamps for easy installation
• BATTERY: Emergency light provided with test switch, status indicator and rechargeable battery with maintenance-free 3.6V nickel-cadmium battery provides 90 minutes of emergency power
• WARRANTY: 2-year limited warranty
• INSTALLATION: Wall or ceiling mount
• DIMENSIONS: Length: 10.125in x Height 3.75in x Width 3.75in
• LED emergency light with dual lamp heads
• Lights 3 ft. path of egress with 14 ft. coverage at 7.5 in. mount height
• Essential to meet Life Safety Codes

The 4 ft. long LED Troffer from Lithonia Lighting delivers general ambient lighting in applications such as schools, offices and hospitals. Long-life LEDs, coupled with energy efficient drivers, provide extended service life. Low maintenance and easy to install, this troffer works well in applications where LED is desired and budget-consciousness is needed.

• Steel construction in gloss white
• 29-Watt LED; included
• Energy efficient LED technology allows you to save money on your energy bill
• 120-Volt LED
• Clear acrylic lens provides even light distribution
• 4000K (cool white)
• Brightness: 3980 Lumens

The LED Light Puff from Lithonia Lighting is the perfect energy-efficient solution for general purpose lighting in both residential and light commercial applications. Using eco-friendly LED technology that consumes 33% less energy than T8 fluorescents, this makes an ideal replacement choice for a less-efficient linear fluorescent fixture. Best of all, the LEDs are integrated into the fixture, so you get 50,000 hours of maintenance-free operation without the hassle of ever changing a bulb.

• 4000K LEDs deliver 3100-Lumens of light, but only consume 35-Watt of energy
• High-efficiency fixture consumes 33% less energy than T8 fluorescents
• Impact-resistant acrylic lens will not yellow over time
• LEDs are integrated into the light, so no bulbs are required
• Provides 50,000 hours of maintenance-free operation
• Modern, unobtrusive design complements any interior space
• 120-Volt operation
• CUL listed to meet both U.S. and Canadian safety standards and damp location listed
• For use with non-dimmable switches only
• Backed by 5-year limited warranty

Featuring an integrated LED light source, the 4 ft. LED Flushmount Wraparound Light from Lithonia Lighting mounts flush for wall or ceiling applications. Designed with an impact resistant-prismatic acrylic lens, this fixture uses ultra-efficient LED technology to help lower energy usage and costs. Delivering 2400 Lumens of illumination, this wraparound makes the perfect replacement for traditional 2-light fluorescent T8 or T12 wraps.

• Ideal for replacing 2-light fluorescent T8 or T12 wraps
• Efficient LED delivers 2400 Lumens using just 40-Watt of energy
• 2400 Lumens/4000K color temperature/85 CRI
• Thermal formed diffuser crafted of highly transmissive material to minimize lamp image and provide high-angle brightness control
• Integrated LED technology eliminates the need for bulb replacements
• Light engine delivers long life and excellent color to ensure quality, low-maintenance lighting
• UL certified to standards and listed for damp locations
• Backed by 5-years limited warranty

The Round Low Profile White LED Flush Mount from Lithonia Lighting features an acrylic diffuser with a sleek, compact design. Choosing this energy-efficient LED lighting solution over incandescent will save you money on operating costs. Best of all, the LEDs last 50,000 hours, so you never have to change another bulb.

• Integrated LED's produce 1,600-Lumens (4000K), comparable to two 75-Watt incandescent, while only using 24-Watt of energy
• High-efficiency LED technology
• Easy-latch secures diffuser to housing
• Stay-white acrylic diffuser and steel housing
• 50,000-hour integrated LEDs means you never have to buy or change a light bulb
• Suitable for residential or commercial applications (120-Volt)
• CUL listed to US and Canadian safety standards
• Can be mounted flush to ceiling or wall

Versatile IC and non-IC ratings for this remodel construction can make it an easy choice. The Lithonia Lighting 6-1/2 in. Aluminum Recessed Lighting Remodel unit helps you light a room with the power of incandescence.

• Durable aluminum design with Air-tite construction
• Requires 65-Watt par 30 incandescent bulbs (not included)
• For use in new construction, 3 included remodel clips support installation in plaster, sheet rock and mechanical ceilings, supports direct burial in insulation
• UL Listed
• For installation using factory-assembled wiring, removable J-box for quick and easy access
• 1-year limited warranty
• 120-Volt

The Lithonia Lighting Wraparound clear prismatic lens is made to fit the Lithonia Lighting Traditional 1 ft. x 4 ft. Wrap only. This lens is a replacement for the LB series. The lens is made of acrylic to prevent discoloring over time.

• 48 in. x 10 in.
• This clear acrylic prismatic lens is compatible with the Lithonia Lighting LB series traditional wraparound fixtures.
• Diffuser for LB48", 2 lamp - T8 Lamps
• Lens only
• Acrylic construction
• Lens only works with lithonia lighting models that start with LB 2 32 (diffuser for LB48 in., 2 lamp - T8 lamps)

The Lithonia Lighting 4 ft. Replacement Wrap around Lens has a 2-bulb, square-basket design and is made of a clear, acrylic material. This lens is designed for use with standard Wrap around fixtures and is compatible with 324925 and 324930 light fixtures only.

• Clear, acrylic replacement wrap around lens
• For use with standard wrap around fixtures
• 4 ft. in L
• Compatible with the SB series 4 ft. 2 lamp square basket wraps from Lithonia Lighting only
• UL Listed

The Contemporary Cylinder LED Vanity from Lithonia Lighting offers the perfect balance between LED energy efficiency and attractive modern style. Replacing your traditional-sourced vanity lights with this integrated LED vanity will instantly update the decor in your bath or powder room and will significantly lower your energy usage. This switchable white vanity fixture includes an integral color temperature changing switch to adjust to a specific application upon installation. It is easy to install, maintenance free, and provides the high quality, even illumination ideal for vanity applications.

• 30K, 35K and 40K switchable white color temperature
• Integrated LEDs provide 3100 Lumens at 3000K, 3500 Lumens at 3500K and 3550 Lumens at 4000K; 90 CRI and 50,000 hours of maintenance-free life
• 46 in. vanity light is constructed of acrylic diffuser with chrome housing
• Ceiling or wall mount, vertical or horizontal orientation
• Suitable for damp locations
• Dimmable by either triac or 0-Volt - 10-Volt dimming; use with approved triac or 0-Volt - 10-Volt dimmer only
• Certified; title 24 compliant
• CSA listed to US and Canadian safety standards

The 4 ft. Integrated LED Wraparound Flushmount from Lithonia Lighting provides bright, uniform illumination for general purpose use. More cost-efficient to operate than incandescent and fluorescent lights, it features a 60,000-hour average lifespan with the LEDs conveniently integrated for ease of installation and maintenance, so you never have to worry about changing a bulb. Luminous end caps soften the overall appearance for improved aesthetics, while the white finish complements any interior setting. Ideal applications include garages, workshops, kitchens, utility rooms and corridors in both commercial and residential environments.

• ENERGY STAR qualified for efficiency and quality construction
• Energy-efficient, cool-running LED technology helps save on utility costs
• Acrylic prismatic lens wraps around the fixture to maximize light output and distribution
• Durable steel construction with a white finish and luminous end caps to blend with any interior style
• High-performance LEDs (4000K) boast a 60,000-hour average life with no bulbs to replace
• For use with non-dimmable switches only
• Multi-volt driver (120- to 277-volt)
• Suitable for damp locations
• CSA certified to U.S. and Canadian safety standards

The Lithonia Lighting Futra LED Linear provides an LED lighting platform to deliver general ambient lighting for surface-mount ceiling applications. The light engine delivers long life and excellent color to ensure a quality, low-maintenance light installation. Ideal for use in kitchens, offices, hallways, corridors, foyers, bedrooms, closets, utility work areas and more.

• Constructed of a UV-stabilized impact-resistant polycarbonate diffuser flanked by decorative steel end caps in a brushed nickel finish
• Integrated LEDs produce over 3,570 Lumens, 4000K cool white color temperature and output of 50,000-hours of service
• Long-life LEDs, coupled with a high-efficiency driver, provide extended service life
• Works with most standard incandescent dimmers
• ENERGY STAR certified
• Suitable for damp locations
• UL listed to US and Canadian safety standards

One of the keys to effective recessed lighting is glare control. The steps or groves of a baffle absorb stray light to reduce glare and minimize ceiling brightness. The crisp lines and classic look of the baffle have made it the most popular of all recessed trims.

• Compatible housings: L3, L3R
• 1-piece aluminum open reflectors with integral flange
• Retaining clips pull and snap onto top of reflector to hold trim inside housing
• UL Listed to U.S. and Canadian safety standards
• Damp location listed
• 1-year limited warranty

The LED Saturn Linear Flush Mount offers general ambient lighting from a decorative flush mount fixture. The LED engine delivers a long life of energy savings and reduced maintenance. With finishes in brushed nickel and bronze, this fixture is versatile and will look great in a variety of spaces.

• OPTICS: The sanded white acrylic diffuser delivers 3,200 lumens while softening the appearance of the LEDs
• ENERGY SAVINGS: Provides energy savings by using minimal watts and providing the lumens needed to light the room
• CONSTRUCTION: Available in brushed nickel and bronze finishes, the dual trim frames complement the round LED Saturn offering
• RATINGS: CSA certified to US and Canadian standards, listed for damp locations
• VOLTAGE: Operates at 120-Volts, 60Hz
• HOURS OF LIFE: Long-lasting LED technology maintains 70 percent of lumen output for up to 60,000 hours
• INSTALLATION: Flush mount install
• NON-DIMMABLE: Use with non-dimmable switches only
• WARRANTY: 5-year limited warranty
• DIMENSIONS: 47.66 in. x 10 in. x 2.81 in.

The Lithonia Lighting 6 in. Open Trim (6-Pack) features a brushed-nickel finish and a 1-piece, aluminum reflector. This trim is designed to provide a smooth finish for a uniform distribution of light.

• Brushed-nickel finish
• 1-piece, aluminum reflector
• Narrow-flange reflector trim
• For use in 6 in. new construction and remodel housing
• Damp location listed
• Insulation Contact (IC) rated
• Fits with L7X, L7XR, LC6, L7XF and L7XFR housings

The 2 ft. Integrated LED Wraparound from Lithonia Lighting mounts flush for wall or ceiling applications. This fixture comes with an impact resistant prismatic acrylic lens. This fixture is an ideal replacement for traditional 2-light fluorescent T8 or T12 wraps.

• 1200 Lumens
• 4000K color temperature
• Thermal formed diffuser is of highly transmissive material to minimize lamp image and provides high angle brightness control, O85 CRI
• Uses only 19.6-Watt of energy
• UL certified to US and Canadian standards listed for damp locations, ENERGY STAR certified
• Fixture is an ideal replacement for traditional 2-light fluorescent T8 or T12 wraps
• 120-Volt
• Non-dimmable

The TWR1 LED wall pack offers a classic appearance with a traditional shape and is loaded with modern features including three adjustable light outputs (ALO), three switchable color temperatures (SWW) 30/40/50K CCT and a switchable dusk-to-dawn photocell. TWR1 provides ultimate versatility with 18 configurations in one SKU, making on-the-spot reconfiguring quick and easy. TWR1 is powerful yet efficient, delivering 2,300 - 8,500 lumens and capable of replacing up to a 250w HID while saving up to 86% in energy costs. Offering an expected service life of more than 20 years, the TWR1 LED eliminates frequent lamp and ballast replacements associated with traditional technologies. Designed to provide a cost-effective, energy-efficient solution when replacing the entire site or only a portion of the buildings wall packs. TWR1 is the ideal choice for outdoor wall-mounted applications including loading areas, building facades, driveways, and parking areas.

• Design: the lithonia lighting twr1 LED wall pack is equipped with adjustable lumen output (up to 8,500 Lumens), switchable CCT (30K/40K/50K), and a switchable photocell allowing the contractor to customize to a level perfectly suited for the job site
• Energy savings: long-life LEDs, coupled with a high-efficiency driver, provide superior illumination and extended service life with energy savings of up to 86% when replacing HID wall packs
• Photocell: switchable photocell for dusk-to-dawn operation
• Ratings: UL Listed to U.S. and Canadian safety standards for wet locations, IP65 rated, DesignLights Consortium (DLC) qualified product
• Voltage: UVOLT for 120-Volt to 347-Volt (50 Hz/60 Hz)
• hours of life: LEDs maintain 90% of light output at 100,000 hours of service or L90/100,00- hours
• Installation: designed for wall mounting above four feet from ground. housing is configured for mounting directly over a standard 4 in. outlet box (by others) or for surface wiring via any of four convenient ½ in. threaded conduit entry hubs
• WARRANTY: 5-year limited warranty
• Dimensions: 13.2 in. W x 9.4 in. H x 7.2 in. D
• Adjustable lumen output: 2,300 Lumens, 5,300 Lumens, 8,500 Lumens
• Switchable color temperature: 3000K 4000K 5000K
• CONSTRUCTION: Die-cast aluminum housing & borosilicate glass lens

The Square Low Profile White LED Flush Mount from Lithonia Lighting features an acrylic diffuser with a sleek, compact design. Choosing this energy-efficient LED lighting solution over incandescent will save you money on operating costs. Best of all, the LEDs last 50,000 hours, so you never have to change another bulb.

• Integrated LEDs produce 1,600-Lumens (4000K), comparable to (2) 75-Watt incandescent, while only using 24-Watt of energy
• High-efficiency LED technology
• Easy-latch secures diffuser to housing
• Stay-white acrylic diffuser and steel housing
• 50,000-hour integrated LEDs means you never have to buy or change a light bulb
• Suitable for residential or commercial applications (120-Volt)
• cUL listed to US and Canadian safety standards
• Can be mounted flush to ceiling or wall

The Compact Pro High Bay by Lithonia Lighting delivers an industrial-grade lighting solution in an exceptionally compact fixture that provides for cheaper shipping, condensed storage, and quicker installation. Built with quality to last and performance to get the job done at an affordable price for a base-level product. A great choice for affordable and reliable light-duty industrial applications like warehouses.

• At less than 6 pounds, it can be easily installed by 1 person while still providing the quality of light and durability necessary in an industrial application
• Integrated LEDs generate a nominal 12,000 lumens while efficiently using minimal watts to save money on utility bills
• Meets Highest Standards 6kV ANSI surge protection; UL, cUL certified to US and Canadian standards, listed for Damp Locations, maximum temperature rating up to 55C
• Hanging hardware included and allows for 120/277 multi-volt needs
• LEDs provided 80 color rendering index (CRI), nominal 12,000 lumens at 4000K with a cool white color temperature
• Length 14.4 in. x width 11.5 in. x depth 2.3 in
• Buy with confidence with a 5-year limited warranty

The economical UCES LED Undercabinet includes an easily accessible switch to select a 3000K, 3500K or 4000K color temperature and provides accent or task lighting in residential, hospitality, retail and light commercial applications. Ideal for use under or over cabinets, work areas, office lighting, coves, display cases and task lighting. Available in 12 in., 18 in., 24 in. and 36 in. L in white finish. It's perfect to upgrade to LED from traditional light sources.

• Rugged low profile aluminum housing, white finish with acrylic white diffuser provides soft widespread illumination with zip-lock design for easy installation, cleaning and superior retention
• Long-life LEDs, coupled with a high-efficiency driver, provide extended service life, fixture is rated to deliver L70 performance at 50,000-hours
• Can direct-wire through rear access plate/knockout by utilizing the included Romex connector or can daisy chain through the side knockout
• Works with most standard incandescent dimmers, all Mounting hardware included
• Switchable toggle on the front allows you to adjust between 3 color temperatures, 3000K 3500K 4000K
• UL listed to US and Canadian safety standards, certified product, damp listed
• Available in 12 in., 18 in., 24 in. and 36 in. L
• 5-year limited warranty

Recessed incandescent housings for 2 in. x 8 in. new construction applications. Approved for direct burial in insulation and all ceiling and wiring types. Air-tight, galvanized steel pan with aluminum can and junction box with 4 built-in ROMEX clamps and ground wire. Factory-installed captive bar hangers that span up to 24 oz. and feature stepped shank nail with integral T-bar locks. 2 locking screws hold fixture position. Socket clips to trim to ensure proper and consistent lamp position.

• Aluminum housing
• Ground wire provided
• Removable J-box doors for easy access
• Retaining clips riveted to top of reflector hold trim inside housing
• Damp location listed
• Suitable for ceilings up to 1-1/2 in. thick
• Trim options include 6 in. open, baffle and eyeball (sold separately)
• All trims are available in a white finish (sold separately)

The Lithonia Lighting FMLWL Wraparound provides general ambient lighting for surface mount applications. FMLWL features efficient LED technology that provides the equivalent light output of the traditional 2-lamp T8 wraps. The 4 ft. fixture is perfect for closets, hallways, stairwells and other light commercial spaces.

• Low-profile wrap features a durable polycarbonate lens and is easy to install
• Efficient LEDs deliver 50,000-hours of widespread, reliable illumination
• Multi-volt 120-Volt to 277-Volt standard
• Bright white 3500K color temperature
• Suitable for damp locations
• UL certified to US and Canadian standards
• 0-Volt to 10-Volt dimming capability allows you to adjust lighting to fit your space
• 5-year limited warranty

Recessed housing rated IC or Non-IC for new construction applications. Approved for non-IC ceiling applications and through-branch circuit wiring. Approved for most wiring and ceiling types.

• Aluminum housing with galvanized steel pan
• Ground wire provided
• Removable J-box doors for easy access
• Retaining clips riveted to top of reflector hold trim inside housing
• Approved for direct burial in insulation and all ceiling and wiring types
• Air-tight 6 in. recessed incandescent housings are rated IC/Non-IC for 2x8 new construction
• Expandable bar hangers allow for off-center mounting in wood joist or T-bar ceilings, length of 25-1/4 in. maximum 13-1/4 in. minimum or cut to fit 9 in. O.C joist construction
• Damp location listed (See trim selection for wet location listing)

Recessed housing rated IC or Non-IC for new construction applications. Approved for non-IC ceiling applications and through-branch circuit wiring. Approved for most wiring and ceiling types.

• Aluminum housing with galvanized steel pan
• Ground wire provided
• Removable J-box doors for easy access
• Retaining clips riveted to top of reflector hold trim inside housing
• Approved for direct burial in insulation and all ceiling and wiring types
• Air-tight 4 in. recessed incandescent housings are rated IC/Non-IC for 2x8 and 2x6 new construction (L3) or remodel (L3R) applications
• Include factory-installed captive bar hangers that span up to 24 in. O.C. and feature a stepped shank nail with integral T-bar locks
• Damp location listed

Lithonia Lighting LED Wall Pack With Adjustable Lumen Output And Photocell

• Switchable Lumens (1,450 - 6,850 Lumens)
• 4000K Color Temperature
• 120-277 Volts
• Photocell
• Die Cast Aluminum Housing
• Ideal For Carports, Loading Areas, Driveways, And Parking Areas
• Wall Mounting
• 100,000 Hours
• Textured Dark Bronze Finish
• Mfg #TWX2 LED ALO 40K MVOLT PE DDBTXD
• Switchable Lumens (1,450 - 6,850 Lumens)
• 4000K Color Temperature
• 120-277 Volts
• Photocell