The EU2C by Lithonia Lighting is a dual lamp head LED emergency light. Certified Title 20 for small battery charger systems, the EU2C provides emergency lighting while saving energy. It is ideal for lighting the path-of-egress in applications such as stairways, hallways and other small spaces at lower mounting heights.

• APPLICATIONS: Ideal for small commercial indoor applications requiring match existing equipment for mounting heights up to 10'
• RATINGS: UL damp location listed standard at 50-104 degrees F (10-40C), meets or exceeds all applicable requirements for Life Safety Code and state specific requirements
• VOLTAGE: Functions from 120-277 volts (50/60 Hz) with input wattage of 2 watts
• RATINGS: UL damp location listed standard at 50-104 degrees F, meets or exceeds all applicable requirements for Life Safety Code and state specific requirements
• VOLTAGE: Functions between 120 and 277V with input wattage of 2 watts
• HOURS OF LIFE: The typical life of the LED lamp is 10 years using two 1 Watt LED lamps for emergency light
• DESIGN: Injection-molded, flame-retardant, high-impact, thermoplastic housing with snap-fit design components with LED lamps for easy installation
• BATTERY: Emergency light provided with test switch, status indicator and rechargeable battery with maintenance-free 3.6V nickel-cadmium battery provides 90 minutes of emergency power
• WARRANTY: 2-year limited warranty
• INSTALLATION: Wall or ceiling mount
• DIMENSIONS: Length: 10.125in x Height 3.75in x Width 3.75in
• LED emergency light with dual lamp heads
• Lights 3 ft. path of egress with 14 ft. coverage at 7.5 in. mount height
• Essential to meet Life Safety Codes

The Lithonia Lighting Basics ECRG, is a combination of exit and emergency lighting. The ECRG is ideal for safely illuminating the path of egress above-the-door in small spaces at lower mounting heights while providing 90-minutes of emergency power. Contains ability to switch between red and green letters.

• ECRG LED exit sign has an internal switch for red or green color selection
• Offered in the new bright white thermoplastic housing, the EXRG has a classic design with updated features, this fully assembled single-face exit comes with an extra faceplate and red and green panel inserts for ultimate field configurability
• Multi-voltage 120-Volt - 277-Volt, 50 Hz/60 Hz
• UL Listed, meets all applicable requirements for UL 924, NFPA 101 (current life safety code), NFPA 70 (NEC), FCC title 47, part 15, subpart B and OSHA, indoor damp location 50 degree F to 104 degree F (10 degree C to 40 degree C) listed
• Mounting pattern on canopy (top and side mount) and back plate (back mount) fits most standard size junction boxes
• Typical life of the LED lamp is 10-years
• Provides a minimum of 90-minutes illumination for the rated wattage upon loss of AC power to meet code required emergency lighting
• Battery: 3.6-Volt maintenance-free, rechargeable, nickel metal hydride
• 2-year limited warranty

The Lithonia Lighting Basics EXRG Exit Sign is suitable for emergency signage applications such as stairways and hallways. It's low profile makes it ideal for safely illuminated the path of egress in small spaces and can be wall or ceiling mounted. This fully assembled single-face exit with extra faceplate is available in red and green letters.

• Technology: the exrg LED Exit Sign has an internal switch for red or green color selection
• Ratings: UL Listed, Meets all applicable requirements for UL 924, NFPA 101 (current Life Safety Code), NFPA 70 (NEC), FCC Title 47, Part 15, Subpart B and OSHA, Indoor damp location 50°F to 104°F (10°C to 40°C) listed
• Voltage: dual-voltage input 120V or 277V AC (60 Hz)
• Hours of life: the typical life of the LED lamp is 10 years
• Design features: offered in the bright white thermoplastic housing, the EXRG has a classic design with updated features, this fully assembled single-face exit ships standard with an extra faceplate with red and green panel inserts
• Battery: AC only, emergency battery not included
• Warranty: 2-year limited warranty
• Dimensions: (length x depth x height): 11.63 in. x 1.63 in. x 7.13 in.
• INSTALL: standard universal mount - top, end or back mounting

Featuring an integrated LED light source, the 4 ft. LED Flushmount Wraparound Light from Lithonia Lighting mounts flush for wall or ceiling applications. Designed with an impact resistant-prismatic acrylic lens, this fixture uses ultra-efficient LED technology to help lower energy usage and costs. Delivering 2400 Lumens of illumination, this wraparound makes the perfect replacement for traditional 2-light fluorescent T8 or T12 wraps.

• Ideal for replacing 2-light fluorescent T8 or T12 wraps
• Efficient LED delivers 2400 Lumens using just 40-Watt of energy
• 2400 Lumens/4000K color temperature/85 CRI
• Thermal formed diffuser crafted of highly transmissive material to minimize lamp image and provide high-angle brightness control
• Integrated LED technology eliminates the need for bulb replacements
• Light engine delivers long life and excellent color to ensure quality, low-maintenance lighting
• UL certified to standards and listed for damp locations
• Backed by 5-years limited warranty

The Round Low Profile White LED Flush Mount from Lithonia Lighting features an acrylic diffuser with a sleek, compact design. Choosing this energy-efficient LED lighting solution over incandescent will save you money on operating costs. Best of all, the LEDs last 50,000 hours, so you never have to change another bulb.

• Integrated LED's produce 1,600-Lumens (4000K), comparable to two 75-Watt incandescent, while only using 24-Watt of energy
• High-efficiency LED technology
• Easy-latch secures diffuser to housing
• Stay-white acrylic diffuser and steel housing
• 50,000-hour integrated LEDs means you never have to buy or change a light bulb
• Suitable for residential or commercial applications (120-Volt)
• CUL listed to US and Canadian safety standards
• Can be mounted flush to ceiling or wall

Versatile IC and non-IC ratings for this remodel construction can make it an easy choice. The Lithonia Lighting 6-1/2 in. Aluminum Recessed Lighting Remodel unit helps you light a room with the power of incandescence.

• Durable aluminum design with Air-tite construction
• Requires 65-Watt par 30 incandescent bulbs (not included)
• For use in new construction, 3 included remodel clips support installation in plaster, sheet rock and mechanical ceilings, supports direct burial in insulation
• UL Listed
• For installation using factory-assembled wiring, removable J-box for quick and easy access
• 1-year limited warranty
• 120-Volt

The Lithonia Lighting EU2L LED Emergency Light is suitable for emergency lighting applications such as stairways and hallways. Designed with all-inclusive lamp, reflector and lens assembly. Its low profile and dual lamp heads make the EU2L ideal for safely illuminating the path of egress in small spaces at lower mounting heights. It can be wall or ceiling mounted and will provide 90 minutes of emergency power in the case of power loss.

• DESIGN: This low-profile design features dual adjustable lamp heads making it ideal for small spaces at lower mounting heights
• ENERGY EFFCIENCY: LEDs improve your payback and reduces your total cost of ownership
• MOUNTING: Wall mount and ceiling mount; Surface mount back plate fits most standard size junction boxes and snaps into place
• RATINGS / LISTINGS: UL Listed. Meets all applicable requirements for UL 924, NFPA 101 (current Life Safety Code),NFPA 70 (NEC), California Title 20 section 1605.3 (W)(4), FCC and OSHA; Indoor damp location 50° to 104°F (10°C to 40°C) listed standard
• USE: Provides a min of 90 minutes illumination
• HOURS OF LIFE: The typical life of the LED is 10 years
• AIMABLE: The fully adjustable LED lamp heads allow for more accurate illumination of tight spaces at lower mounting heights
• BATTERY: 3.6V Maintenance-free, rechargeable, nickel-cadmium; Bi-color LED status indicator for battery condition
• WARRANTY: 2 year limited warranty
• DIMENSIONS: 7.88" X 2.75 X 4.5

The LED Light Puff from Lithonia Lighting is the perfect energy-efficient solution for general purpose lighting in both residential and light commercial applications. Using eco-friendly LED technology that consumes 33% less energy than T8 fluorescents, this makes an ideal replacement choice for a less-efficient linear fluorescent fixture. Best of all, the LEDs are integrated into the fixture, so you get 50,000 hours of maintenance-free operation without the hassle of ever changing a bulb.

• 4000K LEDs deliver 3100-Lumens of light, but only consume 35-Watt of energy
• High-efficiency fixture consumes 33% less energy than T8 fluorescents
• Impact-resistant acrylic lens will not yellow over time
• LEDs are integrated into the light, so no bulbs are required
• Provides 50,000 hours of maintenance-free operation
• Modern, unobtrusive design complements any interior space
• 120-Volt operation
• CUL listed to meet both U.S. and Canadian safety standards and damp location listed
• For use with non-dimmable switches only
• Backed by 5-year limited warranty

Inspired by classic fluorescent strip channels, this LLThonia Lighting LED fixture offers a traditional appearance that incorporates the latest technology. Available in several lengths and lumen packages. Ideal for use in commercial, retail, office, warehouse and display applications.

• LED replacement for traditional fluorescent shop lights, designed to match classic look of fluorescent strip light fixtures making it the ideal replacement when upgrading to cost saving LEDs, instant-on and hassle-free installation for your convenience
• 50,000-hours of light: made from high quality materials, these LED lights are designed to provide lighting that lasts for up to 50,000-hours of lifespan or 23-years, replacing your bulbs is now a thing of the past, no disturbing flickering, no inadequate
• 50% energy saving against fluorescent, saves money with energy reducing LEDs that provide 4200 Lumens and designed to last with 5-year limited warranty, long lifespan and low power consumption
• Mvolt and dimmable: LED strip lights have 0-Volt-10-Volt dimming capability which allows you to control home much light is needed, can function between 120-Volt and 277-Volt
• Meets highest industry standards: DLC qualified, CSA certified for damp locations
• Replaces: a 2 lamp 32-Watt T8 fluorescent fixture, Lithonia Lighting C strip is the fluorescent version of this product
• Install in continuous rows with included alignment bracket to create a straight line of CDS strip lights
• Multiple installation options are available with the purchase of separate accessories listed on spec sheet
• MVOLT fixtures is tested to withstand a maximum line surge of 2kV/1kA combination wave for indoor locations
• Minimum starting temperature of minus 40°F and maximum operating temperature of 95°F

The Lithonia Lighting Basics EXRG Exit Sign is suitable for emergency signage applications such as stairways and hallways. Ideal for applications requiring attractive, quick-installation exit signs and low energy consumption and can be wall or ceiling mounted. The emergency power provides 90 minutes of illumination in the event of a power loss.

• Technology: the exrg LED Exit Sign has an internal switch for red or green color selection
• Ratings: UL Listed, Meets all applicable requirements for UL 924, NFPA 101 (current Life Safety Code), NFPA 70 (NEC), FCC Title 47, Part 15, Subpart B and OSHA, Indoor damp location 50°F to 104°F (10°C to 40°C) listed
• Voltage: dual-voltage input 120V or 277V AC (60 Hz)
• Hours of life: the typical life of the LED lamp is 10 years
• Design features: offered in the bright white thermoplastic housing, the EXRG has a classic design with updated features, this fully assembled single-face exit ships standard with an extra faceplate with red and green panel inserts
• Battery: 3.6V Nickel Metal Hydride Battery
• Warranty: 2-year limited warranty
• 2-year limited warranty
• DIMENSIONS: (Length x Depth x Height): 11.63in x 1.63in x 7.24in
• INSTALL: Standard universal mount - top, end or back mounting

The Contemporary Cylinder LED Vanity from Lithonia Lighting offers the perfect balance between LED energy efficiency and attractive modern style. Replacing your traditional-sourced vanity lights with this integrated LED vanity will instantly update the decor in your bath or powder room and will significantly lower your energy usage. This switchable white vanity fixture includes an integral color temperature changing switch to adjust to a specific application upon installation. It is easy to install, maintenance free, and provides the high quality, even illumination ideal for vanity applications.

• 30K, 35K and 40K switchable white color temperature
• Integrated LEDs provide 3100 Lumens at 3000K, 3500 Lumens at 3500K and 3550 Lumens at 4000K; 90 CRI and 50,000 hours of maintenance-free life
• 46 in. vanity light is constructed of acrylic diffuser with chrome housing
• Ceiling or wall mount, vertical or horizontal orientation
• Suitable for damp locations
• Dimmable by either triac or 0-Volt - 10-Volt dimming; use with approved triac or 0-Volt - 10-Volt dimmer only
• Certified; title 24 compliant
• CSA listed to US and Canadian safety standards

The Lithonia Lighting Futra LED Linear provides an LED lighting platform to deliver general ambient lighting for surface-mount ceiling applications. The light engine delivers long life and excellent color to ensure a quality, low-maintenance light installation. Ideal for use in kitchens, offices, hallways, corridors, foyers, bedrooms, closets, utility work areas and more.

• Constructed of a UV-stabilized impact-resistant polycarbonate diffuser flanked by decorative steel end caps in a brushed nickel finish
• Integrated LEDs produce over 3,570 Lumens, 4000K cool white color temperature and output of 50,000-hours of service
• Long-life LEDs, coupled with a high-efficiency driver, provide extended service life
• Works with most standard incandescent dimmers
• ENERGY STAR certified
• Suitable for damp locations
• UL listed to US and Canadian safety standards

• Lithonia Lighting Quantum LED Exit Sign, White Housing, Selectable Red/Green
• Ideal for applications requiring attractive, quick-installation exit signs and low energy consumption
• Engineering-grade thermoplastic housing is impact-resistant, scratch-resistant, and corrosion-proof.
• Switchable Green and Red Lettering
• LQM ships with an extra faceplate to quickly convert from single to double face exit sign depending on the application. Directional chevrons can be easily removed and reinserted depending on the application
• Providing 90-minutes battery capacity
• Mounting canopy allows for top, back or end mounting. Back mount standard for single face only
• 1.2V, 900mAH Ni-Cad Battery
• MFG# 2889RX

The Lithonia Lighting 4 ft. Replacement Wrap around Lens has a 2-bulb, square-basket design and is made of a clear, acrylic material. This lens is designed for use with standard Wrap around fixtures and is compatible with 324925 and 324930 light fixtures only.

• Clear, acrylic replacement wrap around lens
• For use with standard wrap around fixtures
• 4 ft. in L
• Compatible with the SB series 4 ft. 2 lamp square basket wraps from Lithonia Lighting only
• UL Listed

The Lithonia Lighting 6 in. Open Trim (6-Pack) features a brushed-nickel finish and a 1-piece, aluminum reflector. This trim is designed to provide a smooth finish for a uniform distribution of light.

• Brushed-nickel finish
• 1-piece, aluminum reflector
• Narrow-flange reflector trim
• For use in 6 in. new construction and remodel housing
• Damp location listed
• Insulation Contact (IC) rated
• Fits with L7X, L7XR, LC6, L7XF and L7XFR housings

The 2 ft. Integrated LED Wraparound from Lithonia Lighting mounts flush for wall or ceiling applications. This fixture comes with an impact resistant prismatic acrylic lens. This fixture is an ideal replacement for traditional 2-light fluorescent T8 or T12 wraps.

• 1200 Lumens
• 4000K color temperature
• Thermal formed diffuser is of highly transmissive material to minimize lamp image and provides high angle brightness control, O85 CRI
• Uses only 19.6-Watt of energy
• UL certified to US and Canadian standards listed for damp locations, ENERGY STAR certified
• Fixture is an ideal replacement for traditional 2-light fluorescent T8 or T12 wraps
• 120-Volt
• Non-dimmable

The Lithonia Lighting Basics ECRG, is a combination of exit and emergency lighting. The ECRG is ideal for safely illuminating the path of egress above-the-door in small spaces at lower mounting heights while providing 90-minutes of emergency power. Contains ability to switch between red and green letters.

• ECRG LED exit sign has an internal switch for red or green color selection
• Offered in the new bright white thermoplastic housing, the EXRG has a classic design with updated features, this fully assembled single-face exit comes with an extra faceplate and red and green panel inserts for ultimate field configurability
• Multi-voltage 120-Volt to 277-Volt, 50 Hz/60 Hz
• UL Listed, meets all applicable requirements for UL 924, NFPA 101 (current life safety code), NFPA 70 (NEC), FCC title 47, part 15, subpart B and OSHA, indoor damp location 50 degree F to 104 degree F (10 degree C to 40 degree C) Listed
• Mounting pattern on canopy (top and side mount) and back plate (back mount) fits most standard size junction boxes
• Typical life of the LED lamp is 10-years
• Provides a minimum of 90-minutes illumination for the rated wattage upon loss of AC power to meet code required emergency lighting
• Battery: 3.6-Volt maintenance-free, rechargeable, nickel metal hydride
• 2-year limited warranty

Lithonia Lighting LBR 6" LED Retrofit Downlight, Adjustable Lumens (1000-2000), Switchable Color Temp (3000-5000K). Adjustable Lumens: 1000, 1500, 2000. Color Temp: 3000K, 3500K, 4000K, 5000K. 120-277 Volt. 19 Watts. Aluminum Finish. Corridors, lobbies, conference rooms, office applications. 5 Year Warranty. Replaces 1/42TRT or 2/26TRT. Energy Star Certified, Damp Location. 60,000 Life Hours. Mfg #LBR6 ALO2 SWW1 AR LSS MWD MVOLT UGZ QDS

• Adjustable Lumens: 1000, 1500, 2000
• Color Temp: 3000K, 3500K, 4000K, 5000K
• 120-277 Volt
• 19 Watts
• Aluminum Finish
• Corridors, lobbies, conference rooms, office applications

The economical UCES LED Undercabinet includes an easily accessible switch to select a 3000K, 3500K or 4000K color temperature and provides accent or task lighting in residential, hospitality, retail and light commercial applications. Ideal for use under or over cabinets, work areas, office lighting, coves, display cases and task lighting. Available in 12 in., 18 in., 24 in. and 36 in. L in white finish. It's perfect to upgrade to LED from traditional light sources.

• Rugged low profile aluminum housing, white finish with acrylic white diffuser provides soft widespread illumination with zip-lock design for easy installation, cleaning and superior retention
• Long-life LEDs, coupled with a high-efficiency driver, provide extended service life, fixture is rated to deliver L70 performance at 50,000-hours
• Can direct-wire through rear access plate/knockout by utilizing the included Romex connector or can daisy chain through the side knockout
• Works with most standard incandescent dimmers, all Mounting hardware included
• Switchable toggle on the front allows you to adjust between 3 color temperatures, 3000K 3500K 4000K
• UL listed to US and Canadian safety standards, certified product, damp listed
• Available in 12 in., 18 in., 24 in. and 36 in. L
• 5-year limited warranty

TWX LED wall-Pack family, a ground-up design that has the low initial cost customers demand while providing superior performance and a traditional form. The TWX1 LED is energy efficient saving up to 83% in energy costs when replacing a metal halide luminaire. The Adjustable Light Output (ALO) feature allows the contractor to set the light output during installation, to a level perfectly suited for the job site. The TWX1 LED ALO luminaires can replace anything from a CFL to 100-Watt metal halide luminaire.

• Adjustable light output maximizes flexibility in the field
• TWX1 LED is energy efficient saving up to 83% in energy costs when replacing a metal halide luminaire
• Hardwired on/off capability only
• CSA certified to US and Canadian standards, listed as a Design Lights Consortium (DLC) qualified product and IP65 rated for outdoor applications
• MVOLT driver operates on any line voltage from 120-Volt to 277-Volt (50 Hz/60 Hz) and can be mounted directly over a standard electrical junction box or back wiring can be connected and stored in the internal compartment
• Light engine(s) configurations consist of high-efficacy LEDs where the advanced optical design uses both reflector and refractor technologies that work together to create superior illumination and further throw, getting the light where it is needed
• Exterior painted parts are protected by a zinc-infused super durable TGIC thermoset powder coat finish providing superior resistance to corrosion and weathering withstanding extreme climate changes without cracking or peeling
• 5-year limited warranty

TWX LED wall-Pack family, a ground-up design that has the low initial cost customers demand while providing superior performance and a traditional form. The TWX1 LED is energy efficient saving up to 83% in energy costs when replacing a metal halide luminaire. The Adjustable Light Output (ALO) feature allows the contractor to set the light output during installation, to a level perfectly suited for the job site. The TWX1 LED ALO luminaires can replace anything from a CFL to 100-Watt metal halide luminaire.

• Adjustable light output maximizes flexibility in the field
• TWX1 LED is energy efficient saving up to 83% in energy costs when replacing a metal halide luminaire
• Hardwired on/off capability only
• CSA certified to US and Canadian standards, listed as a Design Lights Consortium (DLC) qualified product and IP65 rated for outdoor applications
• MVOLT driver operates on any line voltage from 120-Volt to 277-Volt (50 Hz/60 Hz) and can be mounted directly over a standard electrical junction box or back wiring can be connected and stored in the internal compartment
• Light engine(s) configurations consist of high-efficacy LEDs where the advanced optical design uses both reflector and refractor technologies that work together to create superior illumination and further throw, getting the light where it is needed
• Exterior painted parts are protected by a zinc-infused super durable TGIC thermoset powder coat finish providing superior resistance to corrosion and weathering withstanding extreme climate changes without cracking or peeling
• 5-year limited warranty

The Wall-Mount Outdoor Bronze LED Decorative Light from Lithonia Lighting includes integrated LEDs, so no bulbs are required. It is easy to mount and comes fully gasketed for outdoor installation. The modern design is ideal for applications where extra style is needed.

• 461-Lumens
• Rugged die-cast aluminum housing is ideal for outdoor installation
• Contoured white polycarbonate diffuser provides soft, even illumination
• Corrosion-resistant design provides style to your outdoor lighting
• Wattall-mount in -Wattet locations
• Fully gasketed design is sealed against dust, moisture and insects
• Easily mounts to a 120-Volt junction box
• 50,000-hour life integrated LEDs (4000K) means no bulbs are required

Lithonia Lighting LED 2' Wraparound, 4000K, 2000 Lumens, 120-277 Volt, White. 17 Watts. White Finish. Ideal for schools, offices, hospitals, hallway application. 5 Year Warranty. Replaces (2) Lamp T8 & T12 Fluorescent. DLC Certified. 50,000 Life Hours. Mfg #SBL2 LP840

• 2000 Lumens
• 4000K
• 120-277 Volt
• 17 Watts
• White Finish
• Ideal for schools, offices, hospitals, hallway application

TWX LED wall-pack family, a ground-up design that has the low initial cost customers demand while providing superior performance and a traditional form. The TWX1 LED is energy efficient saving up to 83% in energy costs when replacing a metal halide luminaire. The TWX1 LED ALO luminaires can replace anything from a CFL to 100-Watt metal halide luminaire.

• Premium borosilicate glass lens works in conjunction with the high-efficiency light engine to provide superior illumination while minimizing wasted up-light
• TWX1 LED is energy efficient saving up to 83% in energy costs when replacing a metal halide luminaire
• CSA certified to US and Canadian standards, listed as a Design Lights Consortium (DLC) qualified product and IP65 rated for outdoor applications
• MVOLT driver operates on any line voltage from 120-Volt to 277-Volt (50 Hz/60 Hz) and can be mounted directly over a standard electrical junction box or back wiring can be connected and stored in the internal compartment
• Light engine(s) configurations consist of high-efficacy LEDs where the advanced optical design uses both Reflector and Refractor technologies that work together to create superior illumination and further throw, getting the light where it is needed
• Exterior painted parts are protected by a zinc-infused super durable TGIC thermoset powder coat finish providing superior resistance to corrosion and weathering withstanding extreme climate changes without cracking or peeling
• 5-year limited warranty

INTENDED USE

• Our recessed LED module is the most economical means to create a well lit environment with exceptional energy efficiency and near zero maintenance. Great for retrofit into existing downlight cans or new construction and remodel applications. Adjustable torsion spring and retention allows fitment into many 5" and 6" cans. The LED module maintains at least 70% light output for 50,000 hours. Indoor and Outdoor Use.
  

CONSTRUCTION

• Aluminum spun reflector with deep baffle configuration for reduced glare. Combined LED and driver printed circuit board attached. Inner reflector cone funnels light through the pressed-in diffused lens.
  

OPTICS

• Diffused lens at end of mixing chamber to provide even light distribution for general illumination. Wide flood beam angle at > 45°.
  

ELECTRICAL

• Center 2 Edge™ (patent pending) technology created for a single point source. Primary power disconnect provided for simple connection to a dedicated LED connector in the housing. Dimming down to 10%. E Series' patent pending driver has zero inrush which allows power loads to be calculated with actual rated wattages.
  

INSTALLATION

• Suitable for installation in standard shallow-height rough-in sections. E26 socket adapter and ships standard. Twin torsion springs ensure easy installation for 5" and 6" recessed housings.
  

SPECIFICATIONS

• Series/Finish: 5" / 6" Baffle LED module, matte white
• Color Temperature: 3000K
• CRI: 93
• Wattage: 10.2
• Lumens: 733
• Voltage: 120
  

Dimensions

• Aperture: 5-5/8"
• Overlap Trim: 7-5/8"
• Height: 2-3/4"
  

CONSULT LED LAMP MANUFACTURER'S SPECIFICATIONS FOR LED LAMP COMPATIBILITY FOR USE IN ENCLOSED OR NON-VENTILATED FIXTURES

One of the keys to effective recessed lighting is glare control. The steps or groves of a baffle absorb stray light to reduce glare and minimize ceiling brightness. The crisp lines and classic look of the baffle have made it the most popular of all recessed trims.

• Compatible housings: L3, L3R
• 1-piece aluminum open reflectors with integral flange
• Retaining clips pull and snap onto top of reflector to hold trim inside housing
• UL Listed to U.S. and Canadian safety standards
• Damp location listed
• 1-year limited warranty

The Lithonia Lighting 2-Light 4 ft. Multi-Volt Wrap provides bright, uniform illumination. Ideal applications include general lighting for garages, workshops, kitchens, utility rooms/spaces and corridors in commercial and residential environments. A multi-volt ballast (120-277-Volt) insures instant-on and no humming or flickering. Light output is approximately equal to (3-1/2) 100-Watt incandescent bulbs.

• Energy efficient fluorescent technology
• Lift-and-shift clear acrylic prismatic lens allows for tool-free bulb replacement
• Durable steel construction with a white finish
• Requires two 32-Watt, instant-start octron T8 medium bi-pin linear fluorescent bulbs (sold separately)
• For use with non-dimmable switches only
• UL listed to US safety standards

The TWR1 LED wall pack offers a classic appearance with a traditional shape and is loaded with modern features including three adjustable light outputs (ALO), three switchable color temperatures (SWW) 30/40/50K CCT and a switchable dusk-to-dawn photocell. TWR1 provides ultimate versatility with 18 configurations in one SKU, making on-the-spot reconfiguring quick and easy. TWR1 is powerful yet efficient, delivering 2,300 - 8,500 lumens and capable of replacing up to a 250w HID while saving up to 86% in energy costs. Offering an expected service life of more than 20 years, the TWR1 LED eliminates frequent lamp and ballast replacements associated with traditional technologies. Designed to provide a cost-effective, energy-efficient solution when replacing the entire site or only a portion of the buildings wall packs. TWR1 is the ideal choice for outdoor wall-mounted applications including loading areas, building facades, driveways, and parking areas.

• Design: the lithonia lighting twr1 LED wall pack is equipped with adjustable lumen output (up to 8,500 Lumens), switchable CCT (30K/40K/50K), and a switchable photocell allowing the contractor to customize to a level perfectly suited for the job site
• Energy savings: long-life LEDs, coupled with a high-efficiency driver, provide superior illumination and extended service life with energy savings of up to 86% when replacing HID wall packs
• Photocell: switchable photocell for dusk-to-dawn operation
• Ratings: UL Listed to U.S. and Canadian safety standards for wet locations, IP65 rated, DesignLights Consortium (DLC) qualified product
• Voltage: UVOLT for 120-Volt to 347-Volt (50 Hz/60 Hz)
• hours of life: LEDs maintain 90% of light output at 100,000 hours of service or L90/100,00- hours
• Installation: designed for wall mounting above four feet from ground. housing is configured for mounting directly over a standard 4 in. outlet box (by others) or for surface wiring via any of four convenient ½ in. threaded conduit entry hubs
• WARRANTY: 5-year limited warranty
• Dimensions: 13.2 in. W x 9.4 in. H x 7.2 in. D
• Adjustable lumen output: 2,300 Lumens, 5,300 Lumens, 8,500 Lumens
• Switchable color temperature: 3000K 4000K 5000K
• CONSTRUCTION: Die-cast aluminum housing & borosilicate glass lens

The Lithonia Lighting ESXF LED floodlight is a general-purpose flood that offers awide selection of options and flexibility. Easy access to adjustable lumen output, colorswitching, and a selectable photocell turns the ESXF into the fixture you need on the spot.With its wide flood (7x7) distribution and DLC performance, the ESXF is a cost-effectivesolution, great for illuminating yards, driveways, signage, patios, warehouses, and securityapplications.

• Adjustable Lumen Output Delivers 1500/3000/ 5000 Lumens
• Replaces up to 150W HID Fixtures. Adjustable lumen output 9W/1500 Lumens, 19W/3,000 lumens, 34W/5000 Lumens
• Switchable Color Temperature 3000/4000/5000K
• Selectable Photocell Included Standard
• TWO (2) Mounting options included- Yoke & Slipfitter
• 120/277 Volt
• CI Code: 276ALH

Recessed housing rated Non-IC for remodel applications. Approved for non-IC ceiling applications and through-branch circuit wiring. Approved for most wiring and ceiling types.

• Aluminum housing
• Ground wire provided
• Removable J-box doors for easy access
• Retaining clips riveted to top of reflector hold trim inside housing
• Damp location listed
• Vertical adjustment of housing allows for flush mounting with ceiling face
• Suitable for ceilings up to 1-1/2 in. thick
• Trim options include 4 in. open, baffle, eyeball and PAR30 wet lite
• All trims are available in a white finish

The 4 ft. LED Linear Retro by Lithonia Lighting delivers general ambient lighting for surface-mount ceiling applications. The ENERGY STAR certified light engine delivers a long LED life and excellent color to ensure a quality, low-maintenance light installation. This linear LED light is ideal for applications such as kitchens, offices, hallways, corridors, foyers, bedrooms, closets, utility work areas and more. With a sleek design and a 50,000-hours maintenance-free LED life, the LED Linear Retro offers the perfect balance of style and reliability.

• 4 ft. LED linear flush mount features an impact-resistant polycarbonate diffuser with brushed nickel cast aluminum decorative end caps
• Integrated LED provides 3400 Lumens and 4000K bright white color temperature
• Energy star certified and Listed for damp locations
• UL Listed to US and Canadian safety standards
• Delivers general ambient lighting for surface-mount ceiling applications
• 5-year lmited warranty

The Lithonia Lighting 6 in. Baffle Trim (6-Pack) features a matte-white finish and a full-reflector trim. This trim is a great addition to your space and is Insulation Contact (IC) rated.

• Matte-white finish
• Full-reflector trim
• For use with PAR30 bulbs, 75-Watt maximum
• IC rated
• UL Listed
• For use with housings L7X, L7XR, LC6, L7XF and L7XFR
• Damp location listed

The 2 ft. x 4 ft. CPX panel from Lithonia Lighting is the perfect choice for a quality LED panel at an affordable price. The smooth, even lens projects a crisp and clean aesthetic. This CPX configuration offers Adjustable Light Output (ALO) for the option of 3800-6200 lumens and Switchable White (SWW) for three color temperature in one - 35/40/50K CCT. CPX is the perfect choice for budget-conscious school, commercial office, or small retail footprint projects.

• TECHNOLOGY: Adjustable Lumen Output (ALO) and Switchable White (SWW) features allow for this panel to offer 9 potential configurations within one fixture, using two switches
• ENERGY SAVINGS: Long-life LEDs, coupled with a high-efficiency driver, provide superior illumination for extended service life
• DIMMING: 0-10 volts driver for dimming down to 10 percent
• RATINGS: Certified for damp locations, CSA certified, IC rated, DLC Standard
• VOLTAGE: Standard MVOLT for 120-277 volts
• HOURS OF LIFE: Greater than 70 percent LED lumen maintenance at 60,000 hours
• INSTALLATION: can be recessed, suspended or surface box mounted with additional kit
• WARRANTY: 5-year limited warranty
• DIMENSIONS: (l x w x h) 47.8 in. x 23.8 in. x 1.7 in.

The Lithonia Lighting FMLWL Wraparound provides general ambient lighting for surface mount applications. FMLWL features efficient LED technology that provides the equivalent light output of the traditional 2-lamp T8 wraps. The 4 ft. fixture is perfect for closets, hallways, stairwells and other light commercial spaces.

• Low-profile wrap features a durable polycarbonate lens and is easy to install
• Efficient LEDs deliver 50,000-hours of widespread, reliable illumination
• Multi-volt 120-Volt to 277-Volt standard
• Bright white 3500K color temperature
• Suitable for damp locations
• UL certified to US and Canadian standards
• 0-Volt to 10-Volt dimming capability allows you to adjust lighting to fit your space
• 5-year limited warranty

The Bronze Outdoor Integrated LED Square Wall Mount Flood Light from Lithonia Lighting is the energy-efficient, low-maintenance lighting solution for security lighting saving an estimated $710. incandescent fixtures over its life. This fixture produces an impressive 2017 Lumen of light output. The integrated LEDs are rated at 50,000 hours of operation, so no bulbs are necessary. That means you don't have to pull out the ladder to replace bulbs, it really lasts that long.

• Rugged cast-aluminum, corrosion-resistant rear housing and lamp heads thermally isolate the LED???s and driver promoting long life
• High-performance integrated LEDs produce over 2,000 Lumen and maintain 70% of light output at 50,000 hours of service
• 120 ft. x 70 ft. light coverage at 10 ft. mounting height
• Designed for wall or eave mounting to existing junction box (provided by others), mount 6-10 ft. high for optimum range and detection

The Lithonia Lighting White Acrylic Diffuser for 1 ft. x 4 ft. Lite Puff Linear Fixtures is made from durable material and given a versatile finish to match many decors. This item is only a diffuser and does not include the light fixture. The exact dimensions are 51 ½" x 11 ¼" x 5 ½".

• Acrylic construction
• White finish
• Replacement diffuser only and is designed for 1 ft. x 4 ft. lite puff linear fixtures
• Distributes light evenly for general illumination
• Easily removed for relamping and cleaning
• Dimensions: 51 ½ x in. 11 ¼ in. x 5 ½ in.
• Replacement diffuser for Litepuff models that begin with 10640 only

STACK Switch provides both functionality and efficiency. Selectable lumens allow for a variety of mounting heights and switchable color temperature allows you to fine-tune the look of your space. It is the fully switchable version of the next generation family of products. STACK Switch is the perfect choice for schools, commercial office spaces and many more applications.

• DESIGN: Wide 7" lens and curved reflector give STACK a high-end aesthetic.
• ENERGY SAVINGS: Long-life LEDs, Long-life LED's, coupled with high-efficiency drivers provide superior quality of light and extended service life.
• DIMMING: 0-10V dimming allows for you to get the brightness of your space just right.
• RATINGS/LISTINGS: CSA, IC, DLC, Damp Location
• VOLTAGE: MVOLT - functions with 120v - 277v.
• HOURS OF LIFE: 80% LED lumen maintenance at 60,000 hours (L80/60,000)
• INSTALLATION: Easy installation in T-grid ceilings, Surface mount boxes, or, drywall grid adapters.
• WARRANTY: 5-year limited warranty
• DIMENSIONS : (l x w x h) 2x2: 23.75" x 23.75" x 1.9"

The CPANL LED Fully Switchable Flat Panel features an integrated driver that allows CPANL to be suspended, direct surfaced mounted or integrated into a t-grid ceiling. The adjustable lumen output (ALO) feature adds flexibility by allowing you to choose between three-lumen options with a simple switch. And now, CPANL also features switchable color temperature (SWW) which allows you to select either warm, medium or cool temperatures. Direct ceiling surface mount kit (DCMK 14) sold separately.

• TECHNOLOGY: Features adjustable lumen output (ALO) and switchable color technology (SWW) allowing for more flexibility and customization for your space
• ENERGY SAVINGS: Long-life LEDs, coupled with a high-efficiency driver, provide superior illumination for extended service life
• DIMMING: 0-10 volts driver for dimming down to 10 percent
• RATINGS: Certified for damp locations, CSA certified, IC certified, DLC certified
• VOLTAGE: Standard MVOLT for 120-277 volts
• HOURS OF LIFE: Greater than 70 percent LED lumen maintenance at 60,000 hours
• INSTALLATION: Flexible mounting options including the standard integral T-Bar clips for installation into T-Grid ceilings; Direct ceiling surface mount kit (DCMK 14) is sold separately, if surface mounting is desired
• WARRANTY: 5-year limited warranty
• DIMENSIONS: 47.7 x 11.9 x 1.1 inches

The EDG Surface-Mount Exit Sign by Lithonia Lighting is ideal for spaces that require an upgraded look in exit signage. Attractive, edge-lit design is suitable in office, retail and commercial spaces. The LED light source provides up to 10 years of light and has low energy consumption making it a smart exit lighting alternative.

• Aluminum construction in clear
• Monochromatic LED, included
• Energy efficient LED technology allows you to save money on your energy bill
• 120-Volt, 277-Volt monochromatic LED
• LEDs mounted on printed circuit board, the typical life of the exit LED lamp is 10-year
• Suitable for applications requiring attractive edge-lit exit signage, universal installation and low energy consumption
• Clear acrylic panels- letters measure 6 in. high with 3/4 in. stroke, with 100 ft. viewing distance rating, based upon UL 924 standard
• 5-year limited warranty

The Lithonia Lighting 2-Lamp Outdoor Floodlight has a sturdy, weather-resistant cast-aluminum housing and twin adjustable heads. Ideal for walkways, patios, and play areas creating an inviting exterior space as well as providing safety and security. It has a white finish and is designed to connect easily to the junction box. Eave or wall-mount only.

• Weather-resistant aluminum housing
• Adjustable lamp heads
• Designed for ease of installation
• Uses 2 outdoor-rated, incandescent PAR lamps (not included)
• UL Listed
• Tool-free adjustable heads for up/down and side-to-side aiming which allows for light to be focused in two directions and is perfect for mounting on the corner of structures
• Designed for easy mounting to junction box

TWX LED wall pack family, a ground-up design that has the low initial cost customers demand while providing superior performance and a traditional form. The TWX2 LED is energy efficient saving up to 82% in energy costs when replacing a metal halide luminaire. The Adjustable Light Output (ALO) feature allows the contractor to set the light output during installation, to a level perfectly suited for the job site. The TWX2 LED ALO luminaires can replace anything from a 70-Watt to 250-Watt metal halide luminaire.

• Adjustable light output maximizes flexibility in the field
• TWX2 LED is energy efficient saving up to 82% in energy costs when replacing a metal halide luminaire
• Hardwired on/off capability only
• CSA certified to US and Canadian standards, listed as a DesignLights Consortium (DLC) qualified product and IP65 rated for outdoor applications
• MVOLT driver operates on any line voltage from 120-Volt to 277-Volt (50 Hz/60 Hz) and can be mounted directly over a standard electrical junction box or back wiring can be connected and stored in the internal compartment
• Light engine(s) configurations consist of high-efficacy LEDs where the advanced optical design uses both reflector and refractor technologies that work together to create superior illumination and further throw, getting the light where it is needed
• Exterior painted parts are protected by a zinc-infused super durable TGIC thermoset powder coat finish providing superior resistance to corrosion and weathering withstanding extreme climate changes without cracking or peeling
• 5-year limited warranty

The 8 ft. LED Strip Light by Lithonia Lighting offers a traditional appearance while incorporating the latest LED technology. The diffuse polycarbonate lens provides smooth, linear illumination which is designed to resemble the classic look of a 2-Lamp fluorescent fixture. The LEDs provide an output of 9,000-Lumens for maximum energy efficiency. This strip light is ideal for commercial, retail, office, warehouse and display applications.

• TECHNOLOGY: The diffuse polycarbonate lens provides smooth, linear illumination which is designed to resemble the classic look of a 2-lamp fluorescent fixture
• ENERGY SAVINGS: Energy star certified by using minimal watts and providing the lumens needed to light the room
• DIMMING: Product is not designed to be used with a dimmer
• RATINGS: The fixture is tested to withstand a maximum line surge of 2.5kV/.2kA ring wave for indoor locations
• VOLTAGE: Fixture can function between 120 and 227 volts and may be surface or suspension mounted with appropriate mounting options (sold separately) and aligner locks in place for easy continuous row mounting
• HOURS OF LIFE: LEDs provide 80 color rendering index (CRI) at 4000K with a cool white color temperature
• INSTALLATION: Quick and simple to install with the snap-lock tool-less channel cover
• WARRANTY: Buy with confidence with a 5-year limited warranty
• DIMENSIONS: length 96-in. x width 2.62-in. x depth 2.16-in.
• The diffuse polycarbonate lens provides smooth, linear illumination which is designed to resemble the classic look of a 2-lamp fluorescent fixture
• Quick and simple to install with the snap-lock tool-less channel cover
• The fixture is tested to withstand a maximum line surge of 2.5kV/.2kA ring wave for indoor locations

The 4 ft. LED Strip Light by Lithonia Lighting offers a traditional appearance while incorporating the latest LED technology. The diffuse polycarbonate lens provides smooth, linear illumination which is designed to resemble the classic look of a 2-Lamp fluorescent fixture. The LEDs provide an output of 4,500-Lumens for maximum energy efficiency. This strip light is ideal for commercial, retail, office, warehouse and display applications.

• TECHNOLOGY: The diffuse polycarbonate lens provides smooth, linear illumination which is designed to resemble the classic look of a 2-lamp fluorescent fixture
• ENERGY SAVINGS: Energy star certified by using minimal watts and providing the lumens needed to light the room
• DIMMING: Product is not designed to be used with a dimmer
• RATINGS: The fixture is tested to withstand a maximum line surge of 2.5kV/.2kA ring wave for indoor locations
• VOLTAGE: Fixture can function between 120 and 227 volts and may be surface or suspension mounted with appropriate mounting options (sold separately) and aligner locks in place for easy continuous row mounting
• HOURS OF LIFE: LEDs provide 80 color rendering index (CRI) at 4000K with a cool white color temperature
• INSTALLATION: Quick and simple to install with the snap-lock tool-less channel cover
• WARRANTY: Buy with confidence with a 5-year limited warranty
• DIMENSIONS: length 48-in. x width 2.62-in. x depth 2.16-in.
• The diffuse polycarbonate lens provides smooth, linear illumination which is designed to resemble the classic look of a 2-lamp fluorescent fixture
• Quick and simple to install with the snap-lock tool-less channel cover
• The fixture is tested to withstand a maximum line surge of 2.5kV/.2kA ring wave for indoor locations

Lithonia Lighting CNY Adjustable Lumens, Switchable CCT Canopy Fixture, 120-347V. 3 Power Levels Deliver 5,000 - 10,000 Lumens. Switchable CCT (30K/40K/50K) offers warm, cool, and daylight in a single fixture. Integrated On/Off photocell. Integrated occupancy sensor can be turned on, off, or set to 10% dim. Install by surface mount, junction box, or pendant mount. IK08 Impact resistant polycarbonate frosted lens. IP65 rated, die cast aluminum housing. Mfg #CNY LED ALO SWW2 UVOLT PE PIR

• 3 Power Levels Deliver 5,000 - 10,000 Lumens.
• Switchable CCT (30K/40K/50K) offers warm, cool, and daylight in a single fixture
• Integrated On/Off photocell
• Integrated occupancy sensor can be turned on, off, or set to 10% dim

Recessed incandescent housings for 2 in. x 8 in. new construction applications. Approved for direct burial in insulation and all ceiling and wiring types. Air-tight, galvanized steel pan with aluminum can and junction box with 4 built-in ROMEX clamps and ground wire. Factory-installed captive bar hangers that span up to 24 oz. and feature stepped shank nail with integral T-bar locks. 2 locking screws hold fixture position. Socket clips to trim to ensure proper and consistent lamp position.

• Aluminum housing
• Ground wire provided
• Removable J-box doors for easy access
• Retaining clips riveted to top of reflector hold trim inside housing
• Damp location listed
• Suitable for ceilings up to 1-1/2 in. thick
• Trim options include 6 in. open, baffle and eyeball (sold separately)
• All trims are available in a white finish (sold separately)

Recessed housing rated IC or Non-IC for new construction applications. Approved for non-IC ceiling applications and through-branch circuit wiring. Approved for most wiring and ceiling types.

• Aluminum housing with galvanized steel pan
• Ground wire provided
• Removable J-box doors for easy access
• Retaining clips riveted to top of reflector hold trim inside housing
• Approved for direct burial in insulation and all ceiling and wiring types
• Air-tight 6 in. recessed incandescent housings are rated IC/Non-IC for 2x8 new construction
• Expandable bar hangers allow for off-center mounting in wood joist or T-bar ceilings, length of 25-1/4 in. maximum 13-1/4 in. minimum or cut to fit 9 in. O.C joist construction
• Damp location listed (See trim selection for wet location listing)

Lithonia Lighting LED Wall Pack With Adjustable Lumen Output And Photocell

• Switchable Lumens (1,450 - 6,850 Lumens)
• 4000K Color Temperature
• 120-277 Volts
• Photocell
• Die Cast Aluminum Housing
• Ideal For Carports, Loading Areas, Driveways, And Parking Areas
• Wall Mounting
• 100,000 Hours
• Textured Dark Bronze Finish
• Mfg #TWX2 LED ALO 40K MVOLT PE DDBTXD
• Switchable Lumens (1,450 - 6,850 Lumens)
• 4000K Color Temperature
• 120-277 Volts
• Photocell

The Compact Pro High Bay by Lithonia Lighting delivers an industrial-grade lighting solution in an exceptionally compact fixture that provides for cheaper shipping, condensed storage, and quicker installation. Built with quality to last and performance to get the job done at an affordable price for a base-level product. A great choice for affordable and reliable light-duty industrial applications like warehouses.

• At less than 6 pounds, it can be easily installed by 1 person while still providing the quality of light and durability necessary in an industrial application
• Integrated LEDs generate a nominal 15,000 lumens while efficiently using minimal watts to save money on utility bills
• Meets Highest Standards 6kV ANSI surge protection; UL , cUL certified to US and Canadian standards, listed for Damp Locations, maximum temperature rating up to 55C
• Hanging hardware included and allows for 120/277 multi-volt needs
• LEDs provided 80 color rendering index (CRI), nominal 15,000 lumens at 4000K with a cool white color temperature
• Length 14.4 in. x width 11.5 in. x depth 2.3 in
• Buy with confidence with a 5-year limited warranty