Electrical
This liquid title connector is a member of the Snap2It Series. For use only with liquid-tight conduit, type B only. The product has easy, push on installation, no tools required.
- Competitively priced
- Fast installation
- Trade size: 3/4 in.
- Knockout size: 3/4 in.
- Dimensions: 2.376 in. x 0.619 in. x 1.420 in.
For Non-Metallic Cable
- Twin Screw
- For Indoor Use Only
- Use In Dry Location To Connect Non-Metallic Cable To Metal Enclosures
- Green Straight Slot and Hex Head 10/32" Screw with Washer
- 3/8" Long
- Used For Quick Grounding Of Switch and Outlet Boxes
Specially designed for easy installation, Eaton's BR load centers house the branch circuit breakers and the wiring required to distribute power to individual circuits. This panel is a main lug panel which is used as sub-panel to add circuits to an existing main breaker panel. Sub panels are often used in a garage, home addition, barn or storage shed and/or workshop. The branch breakers protect the wires leading to individual electrical loads such as fixtures and outlets. The BR48L125SP is a 125 Amp main lug with 4-spaces and 8-circuits.
- Amperage rating: 125 Amp
- Bus material: aluminum
- Rated NEMA 1 for indoor use
- Interrupt rating: 10 kAIC
- Mounting: surface
- Number of circuits: 8
- Number of spaces: 4
- Phase: single-phase
- Voltage rating: 120/240-Volt
- Wire size: #14-1/0 AWG Cu/Al at 60 degree C or 75 degree C
- Tangential center knockout easier installation for conduit applications
- Steel back pan provides solid and reliable breaker mounting single piece design for stability and durability
- Single keyhole mounting - provides easier mounting and leveling
- Drywall marking on enclosure - indicates proper mounting depth for flush applications
- Used with: type BR breakers
Arlington's Screw 90 degree non-metallic connector. It is used with non-metallic liquid-tight conduit, type B only. It is produced from UV rated plastic for long outdoor life.
- Conduit threads onto ferrule and up inside the outer body, inside taper squeezes down on the outside of conduit for a superior liquid tight seal
- To install simply screw onto the conduit until it stops
- Fitting is not in alignment with knock-out you may unscrew the fitting up to 1 full turn for adjustment
- Also for use with flexible non-metallic tubing
- Trade size: 3/4 in.
- Knockout size: 3/4 in.
- Dimensions: 2.489 in. x 0.545 in. x 2.872 in.
HUBBELL WIRING Device-Kellems wall plates bring an unparalleled combination of features, benefits and advantages. They are elegant enough for the home and tough enough to withstand the most rigorous environments. Bryant nylon wall plates are designed for durability and easy cleaning. Standard sized wall plates are 1/8 in. larger to give you that extra coverage to hide rough box openings. The depth is 1/4 in. so that it will comfortably fit over the device even on imperfect installations or on retrofit work.
- Nylon wall plate is virtually unbreakable
- Smooth finish is easy to clean
- Mounting screws included, brass, painted slotted screw head
- Captive mounting screw hole, screw won't fall out of plate
TAYMAC wall plates are used in home, commercial or industrial settings for enhance durability and appearance. Metal wall plates have a beauty, weight and feel that plastic cannot replicate. Includes screws in matching finish.
- Easily primed and painted to match or complement walls
- Solid sound compared to thin, hollow resonance of economy plastic wall plates
- Durable, won't crack, peel or discolor over time
- Won't bow, crack or distort during installation
- Premium powder coat
HUBBELL WIRING Device-Kellems wall plates bring an unparalleled combination of features, benefits and advantages. They are elegant enough for the home and tough enough to withstand the most rigorous environments. Bryant nylon wall plates are designed for durability and easy cleaning. Standard sized wall plates are 1/8 in. larger to give you that extra coverage to hide rough box openings. The depth is 1/4 in. so that it will comfortably fit over the device even on imperfect installations or on retrofit work.
- Nylon wall plate is virtually unbreakable
- Smooth finish is easy to clean
- Mounting screws included, brass, painted slotted screw head
- Captive mounting screw hole, screw won't fall out of plate
Connectors that are used for standard metal-clad cables. Product is made from galvanized steel and is made to fit to afc cable systems mc cable products. Connectors come 25 pieces to a package.
- Standard connectors for mc cables
- 25 Connectors per package
- Galvanized steel material
- Compatible with all manufacturer brands of mc cables
Metallic Liquid-Tite Connecter 1/2"
TAYMAC wallplates are used in home, commercial or industrial settings for enhance durability and appearance. Metal wallplates have a beauty, weight and feel that plastic cannot replicate. Includes screws in matching finish.
- Easily primed and painted to match or complement walls
- Solid sound compared to thin, hollow resonance of economy plastic wallplates
- Durable, won't crack, peel or discolor over time
- Won't bow, crack or distort during installation
- Premium North American powder coat
The Husky 100 ft. 14/3 Red and Black Extension Cord is a medium duty indoor/outdoor extension cord for use with such devices as appliances and consumer electronics. This cord was made with vinyl jacket and molding plug. It has a durable strain relief to make sure the plug securely connected with cable.
- Rated at 125-Volt/13-Amp/1625-Watt and listed by UL approval, ideals for use with medium duty output devices
- Our medium-duty power supply cords are made to replace used and worn out cords on some portable power tools
- Available in 3-conductor, these cords feature molded plugs for added strength and durability
- NEMA 5-15P and NEMA 5-15R 3-wire extension cord, it can be used for outdoor in between temperature range -40 degree C to 75 degree C (-40 degree F to 167 degree F)
The 1/2 in. Compression Connector is a non-metallic UF Connector, compression type for underground feeder cable. It has a low-profile design to fit the new smaller UF cables as well as standard sizes. The connector is UL listed as well as CSA and has a cable range of 14/2 in. - 12/2 in.
- Compression type for underground feeder cable
- Low profile design to fit the new smaller UF cables as well as standard sizes
- Trade size: 1/2 in.
- Knockout size: 1/3 in.
- Cable range: 14/2 in. - 12/2 in.
- Dimensions: 1.792 in. x 0.630 in. x 1.042 in.
Arlington's Snap2It Zero to 90 degree Non-Metallic Connector for use this liquid-tight conduit, type B only. Easy to install with push on installation. It is produced from UV rated plastic for long outdoor life.
- Adjusts for all angles 0 degree -90 degree
- To adjust the angle simply loosen the center nut, twist to the correct angle and retighten
- Knockout size: 3/4 in.
- Trade size: 3/4 in.
- Size 0 Fits 14/2,14/3,12/2, Ac and Mc
- Use To Reduce The Size Of The Conduit Hole Opening In Steel and Other Metal Enclosures
- Must Use One Inside and One Outside
- For Indoor Use Only
- Die-Cast Zamak Construction
- Concrete Tight
Eatons Arc Fault Circuit Interrupters (AFCIs) use advanced electronic technology to reduce fire hazards in electrical circuits, including connected cords. They meet the requirements of the UL Standard for Safety, UL 1699 for devices that reduce the effects of persistent arcing faults that may pose a risk of fire under certain conditions. Arcing creates high intensity heating at the point of the arc resulting in burning particles that may over time ignite surrounding material, such as wood framing or insulation. The CHFCAF120 is a 20 Amp combination type breaker that includes all the protection of the branch feeder, plus it directly detects persistent low current arcing faults down to 5 Amp to efficiently protect against fire hazards in the cords connected to outlets.
- Combination type includes all the protection of the branch feeder, plus it directly detects persistent low current arcing faults down to 5 Amp to efficiently protect against fire hazards in the cords connected to outlets
- Branch feeder mitigates parallel arcing faults, which produce the most energy of all arcing faults, in the complete circuit including connected cords for enhanced safety
- For use in type CH load centers
- Amp: 20 Amp
HUBBELL WIRING Device-Kellems wall plates bring an unparalleled combination of features, benefits and advantages. They are elegant enough for the home and tough enough to withstand the most rigorous environments. Bryant nylon wall plates are designed for durability and easy cleaning. Standard sized wall plates are 1/8 in. larger to give you that extra coverage to hide rough box openings. The depth is 1/4 in. so that it will comfortably fit over the device even on imperfect installations or on retrofit work.
- Nylon wall plate is virtually unbreakable
- Smooth finish is easy to clean
- Mounting screws included, brass, painted slotted screw head
- Captive mounting screw hole, screw won't fall out of plate
Leviton offers a large selection of 15, 20, 30 and 50 Amp Commercial Grade Straight Blade Plugs and Connectors, available in a wide variety of features. These rugged performers are moisture, chemical and abuse-resistant. And they're ideal for indoor and outdoor use. Our EPTR rubber-backed plugs and connectors stand up to rough use, protecting against dirt and moisture. The deep-slotted, backed-out terminal screws draw back wire clamps securely over stripped leads for maximum conductivity.
- Thermoplastic material
- Residential use
- Black
- UL and CSA listed
Screw-On 90 degree non-metallic connector for use with non-metallic liquid tight conduit, type B. The connector is produced from UV rated plastic for long outdoor life. Simply screw the connector onto the conduit until it stops, if the fittings are not in alignment with the knockout, you may unscrew the fitting up to one full turn for adjustment.
- Conduit threads onto ferrule and up inside the outer body, inside taper squeezes down on the outside of conduit for a superior liquid tight seal
- UV rated plastic
- Use with non-metallic liquid tight conduit, type B
- Also for use with flexible non-metallic tubing
- Trade size: 1/2 in.
- Knockout size: 1/2 in.
- Dimensions: 2.110 in. x 0.542 in. x 2.525 in.
Built of durable thermoplastic, Leviton range and dryer power outlets; in flush mount, surface mount and panel mount versions; come equipped with heavy-gauge, double-wire copper alloy contacts. To ensure correct and speedy wiring, terminals have ID markings. Flush-mount devices fit single or 2-Gang outlet boxes.
- Made of durable thermoplastic
- Heavy-gauge, double-wipe copper alloy contacts
- All mounting hardware included
- Limited 10-year warranty
- Mounting hardware included
- UL and CSA listed
- Use Without Locknut
- Protects Wire
- For Rigid Conduit
HUBBELL WIRING Device-Kellems wall plates bring an unparalleled combination of features, benefits and advantages. They are elegant enough for the home and tough enough to withstand the most rigorous environments. Bryant nylon wallplates are designed for durability and easy cleaning. Standard sized wallplates are 1/8 in. larger to give you that extra coverage to hide rough box openings. The depth is 1/4 in. so that it will comfortably fit over the device even on imperfect installations or on retrofit work.
- Nylon wall plate is virtually unbreakable
- Smooth finish is easy to clean
- Mounting screws included, brass, painted slotted screw head
- Captive mounting screw hole, screw won't fall out of plate