This Type 1 ACME valve (CGA791) is intended for DOT cylinders with 20 pounds LPG capacity. This valve has a vapor service outlet, relief valve, captive fixed liquid level gauge, and an overfill prevention device (OPD). The brass safety cage surrounds critical welds, providing additional protection to components for long-term operational performance.

• Rapid purging and filling with over one million BTU withdrawal capacity
• Tri-lobular one-piece forged aluminum handwheel
• Double o-ring stem seal for improved leak resistance
• Pre-applied sealant
• Quality o-ring check valve seat; opens only with positive seal
• Cylinder capacity: 20 lbs
• Container Connection: 3/4" 14 NGT
• Outlet Connection: Type 1 ACME and POL
• Relief Setting: 375 PSIG
• Dip Tube: 4"

• 3/4" x 250 ft.
• Stainless steel pressure liner and an engineered polymer jacket
• The jacket is designed to enhance the energy dissipating properties of the flexible gas piping
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

• Designed to efficiently repair broken door jambs
• 4-1/2 in. to 21-1/2 in. locking space allows for convenient use
• Works well with 1-3/4 in. D doors
• Suitable for both commercial and residential use

• With CounterStrike, you can feel more at ease about the safety of your gas piping during a lighting storm. Decrease the potential for gas piping damage from lighting strikes with this flexible stainless steel piping.
  

It features a pressure liner and an engineered polymer jacket. The jacket is designed to enhance the piping’s energy-dissipating properties.

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

• With CounterStrike, you can feel more at ease about the safety of your gas piping during a lighting storm. Decrease the potential for gas piping damage from lighting strikes with this flexible stainless steel piping.
  

It features a pressure liner and an engineered polymer jacket. The jacket is designed to enhance the piping energy-dissipating properties.. MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

• Made from premium-quality materials for durability
• Designed to ensure efficient functioning
• Includes 0-rings for a leakproof connection

This tamper-proof gas appliance ball valve is made for appliances that use natural gas, manufactured mixed gases, liquefied petroleum, and LP gas-air mixtures. It comes with the following features: This ball valve was made in Italy. It is constructed from forged brass. Its connections are FIP x FIP.

• Forged brass construction
• Chrome-plated brass
• Double O-ring stem seal
• Teflon seats
• Larger port diameter
• Red full lever handle the valve is
• Certified at 1/2 psi at the appliance
• Certified at 5 psi for indoor piping systems
• UL-Listed (Subject 258)
• Made in Italy

The Flame King 20LB Propane Tank is a pre-purged vacuum ready for filling of propane avoiding you the cost and headache of purging your new tank. It is built from high-grade welded steel and powder-coated for rust prevention. For your safety, your tank comes with an OPD valve to prevent overfilling as well as x-ray and hydrostatic tested. You can be sure to transport safely both in the US and CA as they are DOT and Transport Canada certified.

• High grade steel welded construction
• Premium OPD valve assembly
• Powder coated for long lasting exterior protection
• DOT approved
• X-ray and hydrostatic tested
• Comfortable hand-holds in the collar for easier lifting
• Tank arrives empty, pre-vacuum purged and ready to be filled with propane

This ball valve was made in Italy. It is constructed from forged brass. Its connections are FIP x FIP.

• Chrome-plated brass ball
• Double O-ring stem seal
• Teflon seats
• Larger port diameter
• Red full lever handle for use with
• Natural gases
• Manufactured mixed gases
• Liquefied petroleum
• LP gas-air mixtures this valve is
• Certified at 1/2 psi at the appliance
• Certified at 5 psi for indoor piping systems
• UL-Listed subject 258
• AGA-approved

• 1/2" x 100 ft.
• Stainless steel pressure liner and an engineered polymer jacket
• The jacket is designed to enhance the energy dissipating properties of the flexible gas piping
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

• Ideal for repairing porcelain, plastic, metal, or fiberglass surfaces
• Non-yellowing coating gives a superior gloss
• Resists chemical and abrasion for a neat appeal
• Suitable for both interior and exterior applications

The R3001 LPG regulator is suggested for Barbecue Grills, Camp Stoves, Patio Heaters and Other Low Pressure Appliances. Its Higher Flow assure You better appliance performance. May be installed with a variety of inlet and outlet fittings and accessories.

• For barbecue grills, camp stoves, patio heaters and other low pressure appliances using LPG
• 200,000 BTU/hour capacity
• Maximum inlet pressure 250 psi
• Low pressure outlet 11 in. W.C.
• 1/4 in. FNPT inlet x 3/8 in. FNPT outlet
• UL listed
• Install outdoors only

• 3/4" x 100 ft.
• Stainless steel pressure liner and an engineered polymer jacket
• The jacket is designed to enhance the energy dissipating properties of the flexible gas piping
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

• Helps repair 3 in. and 3.5 in. lever and twist wastes
• Includes a flange washer for maintaining sufficient load
• Gasket offers a tight seal against leaks
• Plunger O-ring prevents the loss of fluids

• 1" COUNTERSTRIKE PIPE 100 FT REEL
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

• Designed to efficiently cleaning copper pipes
• Non-stick formulation enables hassle-free joint adjustment
• Soluble paste ideal for use in both hot and cold water
• Works well with leaded and unleaded solder

• Provide complete cathodic protection for any underground tank installation with this 17-pound magnesium anode bag. It includes 13' of #12 insulated copper wire.
• Also included is an H-1 or an AZ-63 anode. The anode is comprised of 90% magnesium, 6% aluminum, and 3% zinc.

Typical Application - LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering, hydraulic and pneumatic systems. Good vibration resistance. Temperature Range of -65° F to +250° F.

• Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
• Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
• Easy to disassemble
• Can be reassembled many times
• Maximum pressure based on 73° F working temperature
• Temperature range of -65° F to +250° F
• Not for potable water

• NFPA-58 approved
• Moisture seal attached at tail end
• Internal plastic liner to protect the PE
• MIP X POLY: 3/4" MIP x 3/4" IPS
• 36"L
• SDR 11
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

This fitting includes a split ring and a stainless steel insert. it is also self-flaring, which means no flaring tool is needed. *MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

• Threaded to ensure a secure fit
• Withstands up to 150 PSI pressure to deliver optimum performance
• Malleable to allow for customized use
• Compatible with schedule 40 pipe and pipe nipples

• Fits all junior gauges
• Flat Buna N
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

• 1/2" COUNTERSTIKE PIPE 50 FT REEL
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

• Lets you keep a written record
• Stay organized and focused with well-designed forms
• Easy to manage and ideal for use in the field
• Meets all the requirements for refrigerant record-keeping

This self-flaring fitting does not require a flaring tool. It includes a split ring. It must be installed by trained personnel in accordance with NFPA 58 and 54 state and local codes.

• Autoflare fitting
• 3/4 in.
• Solid brass fitting
• Stainless steel insert

Chicago Fittings X-Riser Service Head Adapter-Anode-less Full Flex Riser, 1/2 in. MPT x 1/2 in. CTS, SDR 7 x 36 OAL. It's our feeling at Chicago Fittings, that Natural Gas and Propane Gas systems should have as few joints as possible, and more importantly, those joints should be located above ground wherever possible. The X-Riser with an integral service head adapter accomplishes both criteria. The use of an X-Riser removes a minimum of (2) below grade joints per riser when compared to that of a standard pigtail style anode-less riser. In addition, those joints, buried below ground are now moved to a single above grade joint eliminating the risks and liabilities associated with below grade joints. With the use of the X-Riser system, gas is distributed from main to meter, meter to appliance, or propane tank to house with a solid (jointless) underground pipe. Combining this philosophy with the long list of features and benefits of the elastic sealing technology makes the X-Riser the most reliable, safest and most cost-effective method for gas piping systems. The typical after-the-meter installation comparing the use of the X-Riser to a traditional prebent pigtail style riser with stab couplings yields a removal of a total of (10) joints and most importantly, eliminates the (4) joints buried below grade. With the X-Riser swivel capabilities we also remove the need for a union and nipple to make the connection above grade.

• No underground joints 1 solid service line from point-to-point with above ground terminations
• No chamfering required eliminates the need for chamfer tools and fusion equipment, a simple clean cut is all that is required
• 1-piece bi-directional seal and built in stiffener - seal assembly can't be installed improperly, eliminates worries of order and orientation of multiple internal components
• No torque requirement all Chicago fittings products incorporate the bottoming or positive stop design, simply tighten the compression nut until it is metal-to-metal and you are done
• IAPMO/UPC/IPC Listed
• Must be installed by trained personnel in accordance with NFPA 58 and 54 state and local codes

Chicago Fittings X-Riser Service Head Adapter-Anode-less Full Flex Riser, 3/4 in. MPT x 3/4 in. IPS, SDR 11 x 36 OAL. It's our feeling at Chicago Fittings, that Natural Gas and Propane Gas systems should have as few joints as possible, and more importantly, those joints should be located above ground wherever possible. The X-Riser with an integral service head adapter accomplishes both criteria. The use of an X-Riser removes a minimum of (2) below grade joints per riser when compared to that of a standard pigtail style anode-less riser. In addition, those joints, buried below ground are now moved to a single above grade joint eliminating the risks and liabilities associated with below grade joints. With the use of the X-Riser system, gas is distributed from main to meter, meter to appliance, or propane tank to house with a solid (jointless) underground pipe. Combining this philosophy with the long list of features and benefits of the elastic sealing technology makes the X-Riser the most reliable, safest and most cost-effective method for gas piping systems. The typical after-the-meter installation comparing the use of the X-Riser to a traditional prebent pigtail style riser with stab couplings yields a removal of a total of (10) joints and most importantly, eliminates the (4) joints buried below grade. With the X-Riser swivel capabilities we also remove the need for a union and nipple to make the connection above grade.

• No underground joints 1 solid service line from point-to-point with above ground terminations
• No chamfering required eliminates the need for chamfer tools and fusion equipment, a simple clean cut is all that is required
• 1-piece bi-directional seal and built in stiffener - seal assembly can't be installed improperly, eliminates worries of order and orientation of multiple internal components
• No torque requirement all Chicago fittings products incorporate the bottoming or positive stop design, simply tighten the compression nut until it is metal-to-metal and you are done
• IAPMO/UPC/IPC Listed
• Must be installed by trained personnel in accordance with NFPA 58 and 54 state and local codes

This 5/8 in. OD, 1/2 in. ID, durable, corrosion resistant stainless steel gas connector is configured with 1/2 in. MIP x 1/2 in. FIP adapters and is 48 in. L. Designed with safety in mind, this CSA approved gas connector is yellow coated. The yellow coating is an industry recognized color for gas lines and provides extra corrosion protection from accidental contact with harmful chemicals that may be found in household products. It is commonly used for the installation of home appliances such as gas ranges and furnaces.

• Designed and certified by CSA for indoor and outdoor use
• Durable and corrosion resistant
• 304 stainless steel
• 100 % factory leak tested

• 1-1/4" COUNTERSTRIKE PIPE 150 FT RL
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

• Ideal replacement for old or damaged duster
• Telescoping handle can be adjusted from 34 in. to 59 in.
• High-grade metal construction ensures durability
• Hanging cap allows for convenient storage when not in use

• 3/8" x 250 ft.
• Stainless steel pressure liner and an engineered polymer jacket
• The jacket is designed to enhance the energy dissipating properties of the flexible gas piping
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

• Made of nylon reinforced vinyl for durability
• Features 12 pockets of various sizes to fit most cleaning products
• Velcro straps ensure a secure fit on the rim of 20, 32, and 44 gal. waste containers
• Comes with a 1-year manufacturer's warranty

The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.

• High quality
• Reliability
• Durability
• Attractive styling

Forged brass construction Chrome plated brass ball Double O-Rings stem seal Teflon seats Tamper proof Blue lever handle Certified 1/2 psi at the appliance Certified 5 psi for indoor piping systems For use with natural, manufactured, mixed gases and LP gas-air mixtures Made in Italy. This ball valve was made in Italy. It is constructed from forged brass. Its connections are FIP x Flare.

• Forged brass construction
• Chrome plated brass ball
• Double O-ring stem seal
• Teflon seats
• Tamper proof
• Blue lever handle
• Certified 1/2 psi at the appliance
• Certified 5 psi for indoor piping systems
• For use with natural, manufactured, mixed gases and LP gas-air mixtures
• Made in Italy

• 1/2" CTS
• 0.09 SDR/WALL
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65 degree F to +250 degree F.

• Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
• Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
• Easy to disassemble
• Can be reassembled many times
• Temperature range of -65 degree F to +250 degree F
• Maximum pressure based on 73 degree F working temperature

• 3/4" IPS
• SDR 11
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

Cathodic protection in underground tank installations is more efficient with this magnesium anode bag. It includes 13' of #12 insulated copper wire and an H-1 or AZ-63 anode that is 90% magnesium, 6% aluminum, and 3% zinc.

Chicago Fittings X-Riser Service Head Adapter-Anode-less Full Flex Riser, 3/4 in. MPT x 1/2 in. CTS, SDR 7 x 36 OAL. It's our feeling at Chicago Fittings, that Natural Gas and Propane Gas systems should have as few joints as possible, and more importantly, those joints should be located above ground wherever possible. The X-Riser with an integral service head adapter accomplishes both criteria. The use of an X-Riser removes a minimum of (2) below grade joints per riser when compared to that of a standard pigtail style anode-less riser. In addition, those joints, buried below ground are now moved to a single above grade joint eliminating the risks and liabilities associated with below grade joints. With the use of the X-Riser system, gas is distributed from main to meter, meter to appliance, or propane tank to house with a solid (jointless) underground pipe. Combining this philosophy with the long list of features and benefits of the elastic sealing technology makes the X-Riser the most reliable, safest and most cost-effective method for gas piping systems. The typical after-the-meter installation comparing the use of the X-Riser to a traditional prebent pigtail style riser with stab couplings yields a removal of a total of (10) joints and most importantly, eliminates the (4) joints buried below grade. With the X-Riser swivel capabilities we also remove the need for a union and nipple to make the connection above grade.

• No underground joints 1 solid service line from point-to-point with above ground terminations
• No chamfering required eliminates the need for chamfer tools and fusion equipment, a simple clean cut is all that is required
• 1-piece bi-directional seal and built in stiffener - seal assembly can't be installed improperly, eliminates worries of order and orientation of multiple internal components
• No torque requirement all Chicago fittings products incorporate the bottoming or positive stop design, simply tighten the compression nut until it is metal-to-metal and you are done
• IAPMO/UPC/IPC Listed
• Must be installed by trained personnel in accordance with NFPA 58 and 54 state and local codes

• Indicates the maximum filling level
• 1/4" MNPT container connection
• 5.6" dip tube length
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

• 3/4" IPS
• 0.090" wall
• 5/8" OD copper size
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

The Flame King 40LB Propane Tank is pre-purged vacuum ready for filling of propane avoiding you the cost and headache of purging your new tank. It is built from high grade welded steel and powder coated for rust prevention. For your safety, your tank comes with an OPD valve to prevent overfilling as well as x-ray and hydrostatic tested. You can be sure to transport safely both in the US and CA as they are DOT and Transport Canada certified.

• Safety first - flame king tanks arrive empty, pre-vacuum purged and ready for filling with LP gas - they are x-ray and hydrostatic tested plus Department of Transportation (DOT) and Transport Canada (tc) certified
• High quality - each tank is constructed from high grade welded steel and powder coated for long lasting durability
• Premium valve -Premium OPD (overfilling prevention device) valve assembly which is required by law in most states, if your tank doesn't have this, most places won't fill it
• Leading the industry - flame king, a leader in propane storage solutions, prides themselves on making the highest quality, premium, refillable propane tanks on the market, from 1lb up to 100lb tanks, we've got you covered
• Suit your needs - with a standard-size connection valve, this large 40 lb tank will connect as easily as smaller tanks, and work with RVs or trailers, propane tank attachable heaters, and other accessories

• 3/8" COUNTERSTRIKE PIPE 100 FT REEL
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

• Grade-2 entry lever is suitable for light commercial applications
• ADA certified for easy accessibility to disabled people
• Polished brass finish adds an attractive aesthetic appeal
• Meets UL standards for safety and reliability

• NFPA-58 approved
• Moisture seal attached at tail end
• Internal plastic liner to protect the PE
• MIP X POLY: 3/4" MIP x 1/2" CTS
• 36"L
• .090" WALL
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

Whether you need to eat, power or grill, Flame King specializes in making propane tanks and cylinders used daily across the globe. The Flame King 30 lbs. propane tank is manufactured with durable powder coat paint that prevents rusting and comfortable handles in the collar make for easier lifting. These cylinders are manufactured to Department of Transportation (DOT) and Transport Canada (TC) specifications.

• High grade steel welded construction
• Premium OPD valve assembly
• X-ray and hydrostatic tested
• Powder coated for long lasting exterior protection
• DOT approved
• Tank arrives empty, pre-vacuum purged and ready to be filled with propane
• Comfortable hand-holds in the collar for easier lifting
• Lasts 50% longer than standard BBQ tank

• Minute Man Eye anchors are commonly used for securing small planes, vineyard trellises, storage sheds, tents, orchard and nursery trees, swing sets, clothes lines, fences, retaining walls, radio antennas, small windmills, floating docks, and pet restraint.
• All eye anchors are manufactured from steel that conforms to ASTM A-36 M1020 standards. Holding strength is based on clay soils which are of hard to medium density. The holding strength is reduced in softer less dense soils and sandy soils.  To ensure maximum holding strength, anchor must be installed to full depth with the bottom of eyelet at ground level.
• Anchor eyelets are always weld closed, eyelets can be left open upon request of the customer.

Forged brass construction Chrome plated brass ball Double O-ring stem seal Teflon seats Tamper proof Blue lever handle Certified 1/2 psi at the appliance Certified 5 psi for indoor piping systems For use with natural, manufactured, mixed gases and LP gas-air mixtures Made in Italy This ball valve was made in Italy. It is constructed from forged brass. Its connections are FIP x Flare.

• Forged brass construction
• Chrome plated brass ball
• Double O-ring stem seal
• Teflon seats
• Tamper proof
• Blue lever handle
• Certified 1/2 psi at the appliance
• Certified 5 psi for indoor piping systems
• For use with natural, manufactured, mixed gases and LP gas-air mixtures
• Made in Italy

Typical Application - LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering, hydraulic and pneumatic systems. Good vibration resistance. Temperature Range of -65° F to +250° F.

• Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
• Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
• Easy to disassemble
• Can be reassembled many times
• Maximum pressure based on 73° F working temperature
• Temperature range of -65° F to +250° F
• Not for potable water

It's our feeling at Chicago Fittings, that Natural Gas and Propane Gas systems should have as few joints as possible, and more importantly, those joints should be located above ground wherever possible. The X-Riser with an integral service head adapter accomplishes both criteria. The use of an X-Riser removes a minimum of (2) below grade joints per riser when compared to that of a standard pigtail style anode less riser. In addition, those joints, buried below ground are now moved to a single above grade joint eliminating the risks and liabilities associated with below grade joints. With the use of the X-Riser system, gas is distributed from main to meter, meter to appliance, or propane tank to house with a solid (jointless) underground pipe. Combining this philosophy with the long list of features and benefits of the Sealastic sealing technology makes the X-Riser the most reliable, safest and most cost-effective method for gas piping systems. The typical after-the-meter installation comparing the use of the X-Riser to a traditional prevent pigtail style riser with stab couplings yields a removal of a total of (10) joints and most importantly, eliminates the (4) joints buried below grade. With the X-Riser swivel capabilities we also remove the need for a union and nipple to make the connection above grade.

• No underground joints 1 solid service line from point-to-point with above ground terminations
• No chamfering required eliminates the need for chamfer tools and fusion equipment, a simple clean cut is all that is required
• 1-piece Bi-directional seal and built in stiffener - seal assembly can't be installed improperly, eliminates worries of order and orientation of multiple internal components
• No torque requirement all Chicago fittings products incorporate the bottoming or positive stop design, simply tighten the compression nut until it is metal-to-metal and you are done
• IAPMO/UPC/IPC Listed
• Must be installed by trained personnel in accordance with NFPA 58 and 54 state and local codes

The R3001 LPG regulator is suggested for Barbecue Grills, Camp Stoves, Patio Heaters and Other Low Pressure Appliances. Its Higher Flow assure You better appliance performance. May be installed with a variety of outlet fittings or accessories.

• For barbecue grills, camp stoves, patio heaters and other low pressure appliances using LPG
• 200,000 BTU/hour capacity
• Maximum inlet pressure 250 psi
• Low pressure outlet 11 in. W.C.
• POL inlet and 3/8 in. FNPT outlet
• UL listed
• Install outdoors only

Oil Creek Plastics Poly Tubing CTS 1/2X500ft. Astm D2513. Pe 2708. Direct Burial. Flexible. Mfg #56085

• Astm D2513
• Pe 2708
• Direct Burial
• Flexible

Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65°F to +250°F.

• Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
• Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
• Easy to disassemble
• Can be reassembled many times
• Maximum pressure based on 73° working temperature
• Temperature range -65°F to +250°F
• Not for potable water

Oil Creek Plastics 3/4" x 500' Poly Tubing IPS. Astm D2513. Pe 2708. Direct Burial. Flexible. Mfg #34IPS500

• Astm D2513
• Pe 2708
• Direct Burial
• Flexible

• 1/2" CTS
• 0.090" wall
• 1/2" OD
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

• Fits all junior gauges
• Combination slotted or phillips
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

It's our feeling at Chicago Fittings, that Natural Gas and Propane Gas systems should have as few joints as possible, and more importantly, those joints should be located above ground wherever possible. The X-Riser with an integral service head adapter accomplishes both criteria. The use of an X-Riser removes a minimum of (2) below grade joints per riser when compared to that of a standard pigtail style anode less riser. In addition, those joints, buried below ground are now moved to a single above grade joint eliminating the risks and liabilities associated with below grade joints. With the use of the X-Riser system, gas is distributed from main to meter, meter to appliance, or propane tank to house with a solid (jointless) underground pipe. Combining this philosophy with the long list of features and benefits of the Sealastic sealing technology makes the X-Riser the most reliable, safest and most cost-effective method for gas piping systems. The typical after-the-meter installation comparing the use of the X-Riser to a traditional prevent pigtail style riser with stab couplings yields a removal of a total of (10) joints and most importantly, eliminates the (4) joints buried below grade. with the X-Riser swivel capabilities we also remove the need for a union and nipple to make the connection above grade.

• No underground joints 1 solid service line from point-to-point with above ground terminations
• No chamfering required eliminates the need for chamfer tools and fusion equipment, a simple clean cut is all that is required
• 1-piece Bi-directional seal and built in stiffener - seal assembly cannot be installed improperly, eliminates worries of order and orientation of multiple internal components
• No torque requirement all Chicago fittings products incorporate the bottoming or positive stop design, simply tighten the compression nut until it is metal-to-metal and you are done
• Must be installed by trained personnel in accordance with NFPA 58 and 54 state and local codes
• IAPMO/UPC/IPC Listed

The R5002 LPG regulator is suggested for Barbecue Grills, Camp Stoves, Patio Heaters and Other Low Pressure Appliances using a Quick connect type 1 connector on Inlet. Very easy to use. Just connect the hose to the Grill or Heater.

• For barbecue grills, camp stoves, patio heaters and other low pressure appliances using LPG
• 60,000 BTU/hour capacity
• Maximum inlet pressure 250 psi
• Low pressure outlet 11 in. W.C.
• Quick connect type 1 inlet
• 24 in. L hose with 3/8 in. F flare end fitting on outlet
• UL and CSA listed
• Install outdoors only

• 3/4" IPS
• SDR 11
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES