For Cabinet and Vanity Drawers. Exact replacement part. Specific size and specification.

• Made of steel
• Zinc plated
• Nylon wheel
• Exact replacement

This drawer slide kit is constructed of steel tracks with plastic rollers, and it comes in a white powder coated finish. These tracks feature a self-closing design that commences at the final 2-1/2 in. from the end of the 19-3/4 in. long tracks when closing. The maximum load capacity for this kit is 75 lbs. and it fits most bottom/side-mounted drawer systems. This kit cannot be cut down to fit smaller drawer depths as it is designed with a positive stop at the ends of the fixed tracks, and because the rear rollers (11/16 in. Dia. wheels) on the sliding tracks are fastened to the ends of the drawer-mounted track pieces. These bottom mount drawer slides can be installed in drawer cabinets with face frames and without. If installing in drawer cabinet with face frame, Prime-Line's model number R-7240 (purchased separately) may be necessary if existing back plates are damaged. The clearance required between the drawer and the drawer opening for these types of slides is as follows: 1/2 in. on left and right sides, 1/4 in. at the bottom and 5/8 in. at the top. Installation instructions are included with each set, and they can also be found within the manufacturer's website.

• REPAIR OR INSTALL DRAWER TRACKS: Prime-Line MP7212 Drawer Slide Kit is perfect for installing or replacing drawer track hardware on most bottom/side-mounted drawer systems for smooth functionality
• SELF-CLOSING DESIGN: This drawer slide hardware features a self-closing mechanism that engages during the last 2-1/2 inches of drawer closure, ensuring seamless and secure closing every time
• DURABLE CONSTRUCTION: Made of steel tracks with a white powder-coated finish and self-lubricating plastic rollers, this replacement drawer track is built to last and can support up to 75 pounds
• INSTALLATION: Comes with all necessary fasteners and detailed instructions for simple installation; ideal for DIY enthusiasts looking for reliable replacement drawer slide solutions
• DIMENSIONS: The 19-3/4 inch tracks fit 16-inch deep drawer cabinets and require specific clearances: 1/2 inch on sides, 1/4 inch at the bottom, and 5/8 inch at the top; for further dimensional information, please see the line drawing
• SPECIAL NOTE - (Not Universal) Be sure to consider installing part number R 7240 as the back bracket if your drawer does not currently have one, or is damaged

This drawer insert will replace old worn out and damaged drawer inserts and are easy to install. It will replace the old style Triangle Pacific brand and other brand drawer inserts. When changing out the drawer insert, be sure to check the monorail track and plastic guides for replacement.

• Durable plastic
• Exact replacement
• Easy to install
• Coordinating drawer color

This is a set of 1 pair of 21-3/4 in. white metal drawer slides for use in 22 in. D drawer cabinets. They have a maximum safe load capacity of 75 lbs., and they are used by man. Easy to install with a few simple tools.

• Mating frame and drawer steel brackets
• Self lubricating rollers
• White powder coated finish
• Steel tracks with flat plastic wheels
• 1 set includes hardware for 1 complete drawer
• For further dimensional information, please see the line drawing

This kit is constructed of a wooden track, steel brackets and a plastic guide and back plate, together with all the parts necessary to repair 1 wooden drawer track system. This track restores smooth operation to track mounted drawers, and it can be used for top or bottom mount installations. This universal kit allows the 24 in. wooden track to be cut down to size to accommodate for shorter drawer applications. The white plastic saddles are used to replace worn or missing guide buttons, enabling the drawers to glide easily while at the same time preventing wear on the cabinet's face frame or drawer opening. This track system is used by many to replace missing or malfunctioning drawer track hardware.

• Used to replace damaged or missing drawer tracks and guides
• Universal hardware system fits most configurations
• 24 in. long track
• Constructed of wood, steel and plastic components
• Cut to size track
• For further dimensional information, please see the line drawing

This drawer slide kit is constructed of steel tracks with plastic rollers, and it comes in a white powder coated finish. These tracks feature a self-closing design that commences at the final 2-1/2 in. from the end of the 17-3/4 in. long tracks when closing. The maximum load capacity for this kit is 75 lbs. and it fits most bottom/side-mounted drawer systems. This kit cannot be cut down to fit smaller drawer depths as it is designed with a positive stop at the ends of the fixed tracks, and because the rear rollers (11/16 in. Dia. wheels) on the sliding tracks are fastened to the ends of the drawer-mounted track pieces. These bottom mount drawer slides can be installed in drawer cabinets with face frames and without. If installing in drawer cabinet with face frame, Prime-Line's model number R-7240 (purchased separately) may be necessary if existing back plates are damaged. The clearance required between the drawer and the drawer opening for these types of slides is as follows: 1/2 in. on left and right sides, 1/4 in. at the bottom and 5/8 in. at the top. Installation instructions are included with each set, and they can also be found within the manufacturer's website.

• INSTALL OR REPLACE DRAWER TRACK HARDWARE - Whether you are installing new drawers or repairing one that don't work properly, this fits most bottom/side-mounted drawer systems 18 inch deep. The drawer slides are constructed of steel tracks in a white finish and self-lubricating plastic rollers.
• SELF-CLOSING DESIGN - The smooth-gliding tracks in the Prime-Line R 7211 kit features a self-closing design that commences at the final 2-1/2 inch from the end of the 17-3/4 inch long tracks when closing.
• EASY TO INSTALL - Installation is quick and easy, and the kit contains all necessary fasteners. Installation instructions are included and also available on Prime-Line's website.
• 75 LBS MAXIMUM SAFE LOAD CAPACITY - The maximum safe load capacity for the drawer slide kit is 75 lbs and is for use in 18 inch deep drawers. It features a positive stop in the closed position and a double stop in the open position, so it doesn't pull too far out and fall off the tracks.
• INSTALLATION TIP - The clearance required between the drawer and the drawer opening for these slides is: 1/2 inch on left and right sides, 1/4 inch at the bottom and 5/8 inch at the top.
• SPECIAL NOTE - (Not Universal) Be sure to consider installing part number R 7240 as the back bracket if your drawer does not currently have one, or is damaged

Precision based on principle: Thanks to the ball bearing principle, a Quadro runner guarantees lasting peak performance and maximum comfort in drawer systems. Concealed elegantly beneath the drawer panel. Great for any home that wants silence and a modern feel.

• For face frame and frameless cabinets
• Silent system: the integrated soft-closing mechanism lets drawers close gently and quietly
• Infinite height adjustment up to 2 mm via a knurled wheel (toolless)
• With assembly screws
• Maintenance-free through self-cleaning ball tracks
• Integrated soft closing
• All mounting hardware included (incl. Face Frame brackets)
• Load capacity up to 90 lbs dynamic (100 lbs static),as per ANSI/BHMA
• Made in Germany