This float valve has a dual inlet thread for connecting the pipe. It provides support against tank walls. It has a 1/2 in. MIP connection.

• Do not use this product with water systems that convey or dispense water for human consumption
• High tensile serrated arms
• Machined flange
• Replaceable seals

Pressure switches are used to control electrically driven water pumps, suitable for all types of pumps: jets, submersible, reciprocating, etc. Pressure switches are needed for rural water systems that rely on wells to supply their water. Water is pumped from the well or other water source to the pressure tank and as the tank fills the air in the tank becomes pressurized. When the pre-set pressure is reached, the pressure switch contacts open to stop the pump. When water is used, the pressure on the pressure tank falls and as it reaches the pre-set cut in pressure of the switch the contacts close, starting the cycle over. These pressure switches are easily adjusted by following instruction inside the switch cover.

• Standard duty
• NEMA type 1 indoor enclosure
• 2 pole, rated 1-1/2 HP at 115 Vac, 2HP at 230 Vac
• Pressure connection: 1/4 in. NPSF, pressure setting 40-60
• Adjustable cut in/out: cut out range 20-65 psig

The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.

• High quality
• Reliability
• Durability
• Attractive styling

• Stainless Steel
• 1/4" X 20 Thread

Pro Series Pumps High Water Alarm is designed to minimize the risk of water damage by acting as an early warning system. For over two decades the Pro Series Pumps High Water Alarm has been protecting from unwanted water damage. It can be placed next to a water heater, beneath a laundry tub, under a sink, behind a refrigerator, next to the air conditioner, anywhere where water or moisture can collect. All it takes is 1/32 in. of water to sound a loud 110 dB alarm, detecting water before mold can grow, or alerting you to potential flood conditions. It includes 6 ft of wire for extending the sensor too hard to reach locations. You can even increase the wire length up to 100 ft. The built in accessory jack allows for additional sensors or a high-water float.

• Battery operated alarm can detect as little as 1/32 in. of water
• Produces a loud 110 dB alarm that can be heard throughout the house to provide an effective early warning system
• Use in a variety of locations: in a sump pit, near water heaters, refrigerators or dishwashers, next to washing machines, under sinks, close to air conditioner drain tubes or wherever there is a risk of water damage
• Sensor wire extends 6 ft. and can be lengthened for hard to reach areas, accommodates the addition of more than 100 ft. of wire (additional 24-Gauge wire not included)
• Built in accessory jack allows for an additional 360 degree water sensor PS-WS360 or a high water float PS-WS (Item 3570418)
• Battery-saver feature only uses energy when the alarm is sounding to offer a long battery life
• Requires 9-Volt battery (not included)
• 5 Year limited warranty

The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.

• High quality
• Reliable performance
• Durability
• Easy to install

The Pro Series Dual Float Switch with Enhanced Controller is one in a line of many Pro Series float switches available for sump pump applications. The Pro Series Pumps lineup gives customers more options to best fit their needs by having a Good, Better, Best philosophy. The mid-level Pro Series Dual Float Switch with Enhanced Controller (DFC1.5) is designed for reliability and flexibility. It has not one, but two micro reed switches. The second float switch, which acts as a fail-safe to provide redundancy, is unique and the most dependable in the industry. It has a protective cage that prevents debris from interfering with the floats, a solid top to keep out sand or dirt, and a vented-curved bottom to prevent build-up under the float. The dual float switch simply mounts to the discharge pipe at the activation height of your choosing with the included stainless steel hose clamp. The DFC1.5 is a piggy-back float switch making compatible with most sump pumps. For easy installation the float switch cord can be unplugged from the controller, the run time is adjustable (after the float drops), and the controller has universal mounting tabs. For enhanced user functionality, the DFC1.5 exercises your sump pump weekly to extend pump life and has a system operating light to display that the control box is operating properly. If you want a sump pump float switch that is dependable and has the flexibility to deal with the unique circumstances in your pit, you have found it, The DFC1.5.

• Two float switches for added protection and redundancy, the secondary float switch acts as a failsafe
• Protective cage for increased reliability
• The primary float switch activates the pump when water reaches the float
• Enhanced controller exercises the sump pump weekly to extend pump life
• System operating light to display that the controller is operating properly
• Adjustable run time (after the float drops) from 5-45 seconds
• Adjustable to any activation height using included stainless steel hose clamp
• Float switch cord can be unplugged from controller for easy installation
• Piggyback plug
• Easy installation
• Compatible with S3050-NS (Item 134653), S3033-NS (Item 134652), S2033-NS (Item 3585548), ST1033-NS (Item 134651)
• Warranty matches the Pro Series Pump it is purchased with, otherwise a 1 year limited warranty applies

Utility gauge for commercial and industrial markets. Black steel case, chrome bezel, copper alloy internals. This gauge has a 2 dial, 1/4 NPT, 100 psi/bar scale.

• 2 in. dial 1/4 NPT
• Accuracy 3-2-3% of span, ASME B40.1 grade B
• 100 psi/bar scale with no logo
• Black steel case with brass wetted parts

The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.

• High quality
• Replace old and worn parts
• No special tools needed
• Easy to install

The Zoeller Tri-Check is a combination PVC check valve and ball valve for use with 2 in. discharge piping. It has a Glue x Glue Union Connection for easy installation. It has a full flow design for maximum performance.

• Full flow design
• Glue x Glue union connection
• Vertical or horizontal installation
• Includes ball valve for code requirements

The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.

• High tensile serrated arms
• Machined flange for support against tank wall
• Replaceable seals
• Dual inlet thread for connecting pipe, locknut

The Zoeller 10-4012 High Level alarm is for use in sump and sewage applications. It uses 115-Volt AC power and also has battery back up power using (2) AA batteries. It comes with a tethered float switch.

• 115-Volt AC power
• Battery back up power using AA batteries
• For use in sump or sewage applications
• Tethered float switch included

The PHCC Pro Series High Water Alarm is designed to minimize the risk of water damage by acting as an early warning system. For over two decades The Pro Series High Water Alarm has been protecting from unwanted water damage. It can be placed next to a water heater, beneath a laundry tub, under a sink, behind a refrigerator, next to the air conditioner, anywhere where water or moisture can collect. All it takes is 1/32 in. of water to sound a 110 dB alarm, detecting water before mold can grow, or alerting you to potential flood conditions. It includes 6 ft. of wire for extending the sensor to hard to reach locations. You can even increase the wire length up to 100 ft.

• Battery operated alarm can detect as little as 1/32 in. of water
• Produces a loud 110 dB alarm that can be heard throughout the house to provide an effective early warning system
• Use in a variety of locations: in a sump pit, near water heaters, refrigerators or dishwashers, next to washing machines, under sinks, close to air conditioner drain tubes or wherever there is a risk of water damage
• Battery-saver feature only uses energy when the alarm is sounding to offer a long battery life
• Accommodates the addition of more than 100 ft. of wire (additional 24-Gauge wire not included)
• Requires 9-Volt battery (not included)

Its hollow core provides a high knot retention and is easy to splice. The fiber is treated with UV stabilizers for sunlight durability. Floats on water, retains strength when wet and may be stored wet without damage.

• Floats on water, retains strength when wet and may be stored wet without damage
• High resistance to abrasion, mildew, oil, grease, gasoline, marine growth and many chemicals
• Best for tie-downs, utility hand lines, pulling lines, ladder lines and marine uses
• Lightweight flexibility
• 100% monofilament fibers

Leonard Control Rod Group Pam-11 Pv-Cr

• Bronze build provides durability
• Ideal for repairing PAM-II-ST old style thermostatic valve
• Resists corrosion to ensure safety and reliability
• Restores system to efficient performance

Pressure switches are used to control electrically driven water pumps, suitable for all types of pumps; jets, submersible, reciprocating, etc. Pressure switches are needed for rural water systems that rely on well to supply their water. Water is pumped from the well or other water source to the pressure tank and as the tank fills the air in the tank becomes pressurized. When the pre-set pressure is reached, the pressure switch contacts open to stop the pump. When water is used, the pressure in the pressure tank fall and as it reached the pre-set cut in pressure of the switch the contacts close, starting the cycle over. These pressure switches are easily adjusted by following instruction inside the switch cover.

• Standard duty
• NEMA type 1 indoor enclosure
• 2 pole, rated 1-1/2 HP at 115 Vac, 2HP at 230 VAC
• Pressure Connection: 1/4 in. NPSF, pressure setting 30-50
• Adjustable cut in/out: cut out range 20-65 psig

Utility gauge for commercial and industrial markets. Black steel case with brass internals. This pressure gauge has a 300 psi/bar scale with a 2 in. dial and 1/4 NPT connection.

• 2 in. dial 1/4 NPT
• Accuracy 3-2-3% of span, ASME B40.1 grade B
• 300 psi/bar scale no logo
• Black steel case, chrome bezel, copper alloy internals

We all know the old adage 'time is money'. The Pro Series Pumps' Quick Connect Main Pipe is a sump pump installation time saver. It is a pre-assembled discharge pipe that will make your sump pump installation quick and easy. No need to remove the pipe from the old pump. Save time from having to cut, drill, prime and glue the PVC pipe. Also, save on the cost of adapters, PVC, primer and cement. The Quick Connect Main Pipe will save you time and money.

• Makes sump pump replacement and installation easy
• No need to remove the pipe from the old pump
• Save time from having to cut, drill, prime and glue PVC pipe
• Save on cost of adapters, PVC, primer and cement
• Total length: 14.25 in.
• Pre-assembled with: 1-1/2 in. rubber coupling, 1-1/2 in. check valve, 1-1/2 in. NPT female adapter, pre-drilled weep hole, 1-1/2 in. discharge pipe and a 1-1/2 in. NPT threaded male adapter

The Pumptrol FSG2J21M4CP electromechanical pressure switch by Square D is the most trusted brand in residential, commercial and industrial pumping applications. This switch has a 30 psi to 50 psi pressure setting range activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached. The NEMA 1 enclosure has a 1/4 in. NPSF internal fluid connection and screw clamp terminals. The switch works with a 1.5 HP or less pump. The adjustable differential range is 15 psi to 30 psi and the cut-out range is 20 psi to 65 psi. The low-pressure cut-off (auto-start-off) operates at approximately 10 psig below the cut-in and will turn off the pump. The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratory (UL) Listed and Canadian Standards Association (CSA) Certified. For over 75 years, Square D pressure switches continue to meet the needs of our customers. Square D Pumptrol pressure switches are manufactured by Schneider Electric.

• If system pressure is lost for any reason, a low water condition for example, the automatic lower pressure/water cut-off feature will open the contacts, turning off the pump
• Universally accepted and recognized design is easy to wire, features drift proof cut-in and cut-out settings and has visible vertical contacts which are easy to inspect
• Switch is UL listed and Canadian Standards Association (CSA) certified
• Activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached
• Pressure switch is RoHS compliant, NSF certified to meet federal low lead requirements

The sump pump check valve is installed in the discharge pipe in sump pump applications. The internal check valve keeps pump fluid from flowing back into the sump basin. Includes Stainless Steel hose clamps.

• Full port valve design
• Flapper is seated on a 15 degree angle to reduce water hammer when pump is shut off
• Design of the flapper prevents debris from building up or getting caught which ensures proper seating
• Made of durable ABS
• Maximum temperature 140 degree F (60 degree C)

High quality, economical design for use in commercial and industrial boiler applications. Dual reading pressure and temperature instrument. This item has a 2 1/ 2 dial, 1/4 npt with 3.63" stem. The temperature range is 70/320F & 20/160C. The psi is 0/75 psi and 0/170 Ft of water reading.

• 2 1/2 dial with 1/4 npt and 3.63" stem
• Accuracy 3-2-3% full scale per Grade B, ASME B40.1
• Scale pressure: dual scale psi & ft of water column; temperature: dual scale F & C; temperature Range 70/320 degree F & 20/160 degree C
• Case black painted steel, dry non-fillable

The Pro Series Pumps Deluxe Dual Float Controller (DFC2) is a premium product. It has a cage that protects the 2 micro reed switches. The second float acts as a fail-safe, providing redundancy. The dual float simply mounts to the discharge pipe, at the activation height of your choosing, with the included stainless steel hose clamp and is a piggy-back switch making it compatible with most sump pumps. For easy installation the float switch can be unplugged from the controller, the run time is adjustable (after the float drops), and the controller has universal mounting tabs. For superior user functionality, the DFC2 exercises the sump pump weekly to extend pump life and has a system operating light to display that the control box is operating properly. It also monitors pump and power conditions, sounds an alarm when problems are detected, and gives a visual light that pinpoints the remedy. Plus, it has a USB Data Port and Remote Terminal to connect to external devices, such as, one of the Pro Series Pumps Connect modules, a home automation system, or other device for remote notification.

• 2 float switches for added protection and redundancy
• Primary float switch activates the pump when water reaches the float
• Secondary float acts as a fail-safe for the first
• Sounds an alarm and alerts when power has failed, a pump or float problem is detected or the battery is low
• USB data port and remote terminal connect to external devices such as the PHCC Pro Series Pumps connect modules, home automation systems or other devices for remote notification
• Exercises the pump weekly to extend pump life
• Adjustable run time (after the float drops) from 5-45 seconds
• Adjustable to any activation height using included stainless steel hose clamp
• Float switch can be unplugged from controller for easy installation
• Optional high water accessory available (PS-WS)
• Warranty matches the Pro Series pump it is purchased with, otherwise a 1-year warranty applies

Would you like to know if water gets too high in your sump or sewage pit? Is it code in your area to have a high water alarm on your sump or sewage pit? If so, the PS-WS is an accessory for The Pro Series Deluxe Float Controller (DFC2, VSC2, TSC2) that will activate a warning light, an audible alarm, send a signal to the remote terminal, and send information through the USB port when water reaches the sensor (allowing for text, email and in app notifications using the PS-WiFi). It simply attaches to the discharge pipe with included mounting hardware and the 10 foot cord plugs in at the bottom of the Deluxe controller. Between the visual light, audible alarm and optional text or email notifications (when using the PS-WiFi) you can be In the know when you are on the go.

• Will activate a warning light, an audible alarm, send a signal to the remote terminal, and send information through the USB port when water reaches the sensor
• For use with the pro series deluxe float controller (DFC2, VSC2, TSC2) or pro series water alarm (PWA2)
• Easily attaches to the discharge pipe with included mounting hardware
• 10 ft. cord with plug

The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.

• High quality
• Reliability
• Durability
• Attractive styling