Searched for "40151500"
Pressure switches are used to control electrically driven water pumps, suitable for all types of pumps; jets, submersible, reciprocating, etc. Pressure switches are needed for rural water systems that rely on well to supply their water. Water is pumped from the well or other water source to the pressure tank and as the tank fills the air in the tank becomes pressurized. When the pre-set pressure is reached, the pressure switch contacts open to stop the pump. When water is used, the pressure in the pressure tank fall and as it reached the pre-set cut in pressure of the switch the contacts close, starting the cycle over. These pressure switches are easily adjusted by following instruction inside the switch cover.
- Standard duty
- NEMA type 1 indoor enclosure
- 2 pole, rated 1-1/2 HP at 115 Vac, 2HP at 230 VAC
- Pressure Connection: 1/4 in. NPSF, pressure setting 30-50
- Adjustable cut in/out: cut out range 20-65 psig
High quality, economical design for use in commercial and industrial boiler applications. Dual reading pressure and temperature instrument. This item has a 2 1/ 2 dial, 1/4 npt with 3.63" stem. The temperature range is 70/320F & 20/160C. The psi is 0/75 psi and 0/170 Ft of water reading.
- 2 1/2 dial with 1/4 npt and 3.63" stem
- Accuracy 3-2-3% full scale per Grade B, ASME B40.1
- Scale pressure: dual scale psi & ft of water column; temperature: dual scale F & C; temperature Range 70/320 degree F & 20/160 degree C
- Case black painted steel, dry non-fillable
The adjust-angle thermometer model AS5 has a black Aluminum case with glass front to exclude dirt and dust. Connection comes standard with a swivel nut 1-1/4 in. - 18 in. NEF thread. This item also comes with a brass thermowell that has a 3/4 NPT connection. The steam length is 3-1/2 in. and the temperature range is 0/160 degree F.
- Simple adjustment just 2 screws permit case to be rotated 180 degree and stem to be positioned in 10 degree increments allowing user to select the most desirable viewing position
- Easy readability lens front blue liquid filled thermometer tube is mounted on V-shaped aluminum scale with bold black lines and numerals
- Accurate calibrated against standards traceable to the national institute of standards and technology and guaranteed accurate to plus or minus 1 scale division
- Construction black molded ABS case with glass front to exclude dirt and dust is standard, aluminum case is optional at additional charge, plastic face is optional at additional charge, ABS case should not be subjected to temperatures greater than 200 degree F
The sump pump check valve is installed in the discharge pipe in sump pump applications. The internal check valve keeps pump fluid from flowing back into the sump basin. Includes Stainless Steel hose clamps.
- Full port valve design
- Flapper is seated on a 15 degree angle to reduce water hammer when pump is shut off
- Design of the flapper prevents debris from building up or getting caught which ensures proper seating
- Made of durable ABS
- Maximum temperature 140 degree F (60 degree C)
The PHCC Pro Series High Water Alarm is designed to minimize the risk of water damage by acting as an early warning system. For over two decades The Pro Series High Water Alarm has been protecting from unwanted water damage. It can be placed next to a water heater, beneath a laundry tub, under a sink, behind a refrigerator, next to the air conditioner, anywhere where water or moisture can collect. All it takes is 1/32 in. of water to sound a 110 dB alarm, detecting water before mold can grow, or alerting you to potential flood conditions. It includes 6 ft. of wire for extending the sensor to hard to reach locations. You can even increase the wire length up to 100 ft.
- Battery operated alarm can detect as little as 1/32 in. of water
- Produces a loud 110 dB alarm that can be heard throughout the house to provide an effective early warning system
- Use in a variety of locations: in a sump pit, near water heaters, refrigerators or dishwashers, next to washing machines, under sinks, close to air conditioner drain tubes or wherever there is a risk of water damage
- Battery-saver feature only uses energy when the alarm is sounding to offer a long battery life
- Accommodates the addition of more than 100 ft. of wire (additional 24-Gauge wire not included)
- Requires 9-Volt battery (not included)
This air valve provides a method of injecting and holding air pressure in water systems. It is used for shallow and deep well pump systems. Other uses include pressurizing piping systems for pressure test and blowing out irrigation lines.
- 1/8 in. MPT for water pumps
- Working pressure 15-150 PSI
- Working temperature: -10 degree F to + 165 degree F
- Opening pressure 3 psi
- Manufactured with light spring required for shallow well pump and bleeder systems
Utility gauge for commercial and industrial markets. This pressure gauge has a 15 psi/bar scale with a 2 in. dial and 1/4 NPT connection. It has a steel case, brass internals and plastic lens.
- 2 in. dial 1/4 NPT
- Accuracy 3-2-3% of span, ASME B40.1 grade B
- 15 psi/bar scale with no logo
- Black steel case with brass connection
A Reliance Pump Tank is a must for any home that uses a pump to draw water from a well. We utilize a parabolic (cone-shaped) diaphragm that eliminates rubbing against itself or the tank wall, causing premature failure. A properly sized pump and pump tank will work as a team to meet your needs and deliver many years of dependable service.
- It ensures that your pump will run for at least one minute each time it cycles, as required by pump manufacturers
- It stores a supplemental water supply between pump cycles, to reduce the number of cycles throughout the day, and helps prolong pump life
- It helps maintain water pressure within your system, ensuring proper operation of your dishwasher and washing machine, and robust flow for showering and bathing
- Strong, flexible butyl diaphragm, powder-coated inner shell for permanent separation of air and water
The Zoeller 10-4012 High Level alarm is for use in sump and sewage applications. It uses 115-Volt AC power and also has battery back up power using (2) AA batteries. It comes with a tethered float switch.
- 115-Volt AC power
- Battery back up power using AA batteries
- For use in sump or sewage applications
- Tethered float switch included
The Pro Series Dual Float Switch with Enhanced Controller is one in a line of many Pro Series float switches available for sump pump applications. The Pro Series Pumps lineup gives customers more options to best fit their needs by having a Good, Better, Best philosophy. The mid-level Pro Series Dual Float Switch with Enhanced Controller (DFC1.5) is designed for reliability and flexibility. It has not one, but two micro reed switches. The second float switch, which acts as a fail-safe to provide redundancy, is unique and the most dependable in the industry. It has a protective cage that prevents debris from interfering with the floats, a solid top to keep out sand or dirt, and a vented-curved bottom to prevent build-up under the float. The dual float switch simply mounts to the discharge pipe at the activation height of your choosing with the included stainless steel hose clamp. The DFC1.5 is a piggy-back float switch making compatible with most sump pumps. For easy installation the float switch cord can be unplugged from the controller, the run time is adjustable (after the float drops), and the controller has universal mounting tabs. For enhanced user functionality, the DFC1.5 exercises your sump pump weekly to extend pump life and has a system operating light to display that the control box is operating properly. If you want a sump pump float switch that is dependable and has the flexibility to deal with the unique circumstances in your pit, you have found it, The DFC1.5.
- Two float switches for added protection and redundancy, the secondary float switch acts as a failsafe
- Protective cage for increased reliability
- The primary float switch activates the pump when water reaches the float
- Enhanced controller exercises the sump pump weekly to extend pump life
- System operating light to display that the controller is operating properly
- Adjustable run time (after the float drops) from 5-45 seconds
- Adjustable to any activation height using included stainless steel hose clamp
- Float switch cord can be unplugged from controller for easy installation
- Piggyback plug
- Easy installation
- Compatible with S3050-NS (Item 134653), S3033-NS (Item 134652), S2033-NS (Item 3585548), ST1033-NS (Item 134651)
- Warranty matches the Pro Series Pump it is purchased with, otherwise a 1 year limited warranty applies
Its hollow core provides a high knot retention and is easy to splice. The fiber is treated with UV stabilizers for sunlight durability. Floats on water, retains strength when wet and may be stored wet without damage.
- Floats on water, retains strength when wet and may be stored wet without damage
- High resistance to abrasion, mildew, oil, grease, gasoline, marine growth and many chemicals
- Best for tie-downs, utility hand lines, pulling lines, ladder lines and marine uses
- Lightweight flexibility
- 100% monofilament fibers
The 6 Qt. Battery Acid pack (Z-Pack) is designed for use with Basement Watchdog 30HDC140S and 24EP6 Standby Batteries. The flexible pour spout helps easily activate the standby batteries. Basement Watchdog batteries are shipped dry (without acid) so they will never lose power before you take them home. By adding the acid just before use, the battery will always be fresh.
- Activates basement watchdog standby batteries
- Flexible pour spout
- 6 qt. included
- 1 package of battery fluid required per basement watchdog battery
A Reliance Pump Tank is a must for any home that uses a pump to draw water from a well. We utilize a parabolic (cone-shaped) diaphragm that eliminates rubbing against itself or the tank wall, causing premature failure. A properly sized pump and pump tank will work as a team to meet your needs and deliver many years of dependable service.
- It ensures that your pump will run for at least one minute each time it cycles, as required by pump manufacturers
- It stores a supplemental water supply between pump cycles, to reduce the number of cycles throughout the day, and helps prolong pump life
- It helps maintain water pressure within your system, ensuring proper operation of your dishwasher and washing machine, and robust flow for showering and bathing
- Strong, flexible butyl diaphragm, powder-coated inner shell for permanent separation of air and water
Pro Series Pumps High Water Alarm is designed to minimize the risk of water damage by acting as an early warning system. For over two decades the Pro Series Pumps High Water Alarm has been protecting from unwanted water damage. It can be placed next to a water heater, beneath a laundry tub, under a sink, behind a refrigerator, next to the air conditioner, anywhere where water or moisture can collect. All it takes is 1/32 in. of water to sound a loud 110 dB alarm, detecting water before mold can grow, or alerting you to potential flood conditions. It includes 6 ft of wire for extending the sensor too hard to reach locations. You can even increase the wire length up to 100 ft. The built in accessory jack allows for additional sensors or a high-water float.
- Battery operated alarm can detect as little as 1/32 in. of water
- Produces a loud 110 dB alarm that can be heard throughout the house to provide an effective early warning system
- Use in a variety of locations: in a sump pit, near water heaters, refrigerators or dishwashers, next to washing machines, under sinks, close to air conditioner drain tubes or wherever there is a risk of water damage
- Sensor wire extends 6 ft. and can be lengthened for hard to reach areas, accommodates the addition of more than 100 ft. of wire (additional 24-Gauge wire not included)
- Built in accessory jack allows for an additional 360 degree water sensor PS-WS360 or a high water float PS-WS (Item 3570418)
- Battery-saver feature only uses energy when the alarm is sounding to offer a long battery life
- Requires 9-Volt battery (not included)
- 5 Year limited warranty
The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.
- High tensile serrated arms
- Machined flange for support against tank wall
- Replaceable seals
- Dual inlet thread for connecting pipe, locknut
The Pumptrol FSG2J21BP electromechanical pressure switch by Square D is the most trusted brand in residential, commercial and industrial pumping applications. The FSG2J21BP has a 30 psi to 50 psi pressure setting range activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached. The NEMA 1 enclosure has a 1/4 in. NPSF internal fluid connection and screw clamp terminals. The switch works with a 1.5 HP or less pump. The adjustable differential range is 15 psi to 30 psi and the cut-out range is 20 psi to 65 psi. The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratory (UL) Listed and Canadian Standards Association (CSA) Certified. For over 75 years, Square D pressure switches continue to meet the needs of our customers. Square D Pumptrol pressure switches are manufactured by Schneider Electric.The Square D by Schneider Electric Pressure Switch is compatible with jet pumps, submersible pumps and reciprocating pumps. The standard action contacts open on rising pressure.
- Suitable for jet pumps, submersible pumps and reciprocating pumps
- Standard-action contacts open on rising pressure
- 30 - 50 PSI
- 1/4 in. pressure connection
- Standard action contacts open on rising pressure
A Reliance Pump Tank is a must for any home that uses a pump to draw water from a well. We utilize a parabolic (cone-shaped) diaphragm that eliminates rubbing against itself or the tank wall, causing premature failure. A properly sized pump and pump tank will work as a team to meet your needs and deliver many years of dependable service.
- It ensures that your pump will run for at least one minute each time it cycles, as required by pump manufacturers
- It stores a supplemental water supply between pump cycles, to reduce the number of cycles throughout the day, and helps prolong pump life
- It helps maintain water pressure within your system, ensuring proper operation of your dishwasher and washing machine, and robust flow for showering and bathing
- Strong, flexible butyl diaphragm, powder-coated inner shell for permanent separation of air and water
